PI entry error/problem

Hi All
I create a PI count using LX16 and then enter the count results in LI11N. Once all quantities are entered in the initial screen a screen appears and advises of % of variance if the quantity entered is not the same as the current stock.
However, sometimes the screen displaying the differences does not appear even though the counted quantity and the stock quantity are different. Why is this?
Warehousing use the differences screen to indicate on a count sheet that there is a variance and then have the part re-counted. The re-counted quantity (if different) is re-entered using LI12N. WM clearing using LI20 and IM clearing using LI21 complete the count.
Thanks in advance
Darren

Thanks Jurgen
Settings were set at 5% and the variance I was looking at was 3.35%
Problem solved
Thanks
Darren

Similar Messages

Lock entries making problem

Hi Experts,
We are facing one problem durring updating the records in background 'Z' transaction. It will update the a record in mm02. The updated record will store in a Z table.
But while executing mass records(multiple records) its getting error as lock entries. This error also coming after 1000 records. Upto 1000 records we are not getting any error. After this lock entries error comming.
Can any one pls guide me what will be the reason behind this? Even while updating the 'Z' records we are added the commit work also . Still the same error comming. Kindly guide as.
Moahana.

Hi
I hope you are using ENQUEUE_E_TABLE and DEQUEUE_E_TABLE FM while updated the tables
Yes Commit statement is very important while updating the records in Tables
Regards
Renu Gusain

I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5. I am receiving an error problem when doing the following - I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive whe

Hi, I am having a little trouble with exporting images to another drive and Catalogue and need some help if anyone can give me some advice
I am currently using Lightroom 5.6 and operating on a Mac with OSX Ver 10.9.5.
I am receiving an error problem when doing the following -
I am exporting selected photos from a particular Catalogue saved on Drive 1 to a folder created on another Drive where a Lightroom Catalogue has been created. In this Catalogue I have arranged for the images once exported to be moved to a different folder - I used the Auto Import process under the File dialogue box.
When processing the Export I receive an error message for each of the images being exported indicating the following -
Heading Import Results
Some import operations were not performed
Could not move a file to requested location. (1)
then a description of the image with file name
Box Save As Box OK
If I click the OK button to each image I can then go to the other Catalogue and all images are then transferred to the file as required.
To click the OK button each time is time consuming, possibly I have missed an action or maybe you can advise an alternative method to save the time in actioning this process.
Thanks if you can can help out.

Thank You, but this is a gong show. Why is something that is so important to us all so very, very difficult to do?

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

We are trying to do a Quick payment from payment workbench and getting 'FRM-41830: List of values contains no entries' error for payment document column/field. Payment document setup looks good. Not sure what the issue is.

Already gone through following three notes but didn't found resolution.
APXPAWKB: FRM-41830 When Clicking on Payment Document LOV (Doc ID 1081305.1)
R12: APXPAWKB: Payment Document Lov Is Empty When Entering A Payment (Doc ID 857587.1)
R12: Payment Workbench Error: FRM-41830 List Of Values Contains No Entries (APXPAWKB.FMB) (Doc ID 1323875.1)

Error "Problem occured locking WS object" while activating Proxy

Hi All,
I have move an Inbout proxy to a different Client(QA system) and in QA system that proxy shows incative.
When i tried to activate that proxy/service in Sproxy, getting error "Problem occured locking WS object".
Proxy was active in development system and was working fine without any error.
Please provide some help, what need to be done to fix this issue
Thanks
Harshit

Hi Harshit,
Try with the following steps in sequence:
1. Re-genarate the proxy in Development - Create a New Transport Reuest.
2. Transport the Proxy from PI Dev to PI OA
3. Confirm the Proxy in PI QA and then, transport the re-generated Request from ECC Dev to ECC QA.
Regards,
Pranav.

Error "Problem building schema" while invoking external webservice

Hi,
I have following problem:
I created 2 BPEL processes.
One of these processes should be called from the other as a partnerlink.
When I create the partnerlink, pointing to the deployed wsdl, I get following error "Problem building schema" when I try to access the input variable that was created by the invoke activity.
I have tried a lot of things but keep on getting this error.
When I create a new, empty BPEL process, and do exactly the same it does work!
any help would be greatly appreciated.....

Hi,
I have given this URL 'http://ws.cdyne.com/WeatherWS/Weather.asmx?WSDL'.
Now it is showing the following error
Exception occured in library handler.Not implemented.
Exception of class CX_SIDL_INTERNAL_ERROR
Please have a look into it
Regards,
Dhana

I'm a character error problem in firefox. How can I solve.

I'm a character error problem in firefox. How can I solve.

Hello haruntt, please be a little more specific about the issue. In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

MPD: ERROR: problems opening audio device

Since a day, maybe a little more, mpd is troubling me. When I use mpc, I get the error
ERROR: problems opening audio device
This is my mpd.conf
# An example configuration file for MPD
# See the mpd.conf man page for a more detailed description of each parameter.
# Files and directories #######################################################
# This setting controls the top directory which MPD will search to discover the
# available audio files and add them to the daemon's online database. This
# setting defaults to the XDG directory, otherwise the music directory will be
# be disabled and audio files will only be accepted over ipc socket (using
# file:// protocol) or streaming files over an accepted protocol.
music_directory "/home/adriaan/Music"
# This setting sets the MPD internal playlist directory. The purpose of this
# directory is storage for playlists created by MPD. The server will use
# playlist files not created by the server but only if they are in the MPD
# format. This setting defaults to playlist saving being disabled.
playlist_directory "/var/lib/mpd/playlists"
# This setting sets the location of the MPD database. This file is used to
# load the database at server start up and store the database while the
# server is not up. This setting defaults to disabled which will allow
# MPD to accept files over ipc socket (using file:// protocol) or streaming
# files over an accepted protocol.
db_file "/var/lib/mpd/mpd.db"
# These settings are the locations for the daemon log files for the daemon.
# These logs are great for troubleshooting, depending on your log_level
# settings.
# The special value "syslog" makes MPD use the local syslog daemon. This
# setting defaults to logging to syslog, otherwise logging is disabled.
log_file "/var/log/mpd/mpd.log"
# This setting sets the location of the file which stores the process ID
# for use of mpd --kill and some init scripts. This setting is disabled by
# default and the pid file will not be stored.
pid_file "/var/run/mpd/mpd.pid"
# This setting sets the location of the file which contains information about
# most variables to get MPD back into the same general shape it was in before
# it was brought down. This setting is disabled by default and the server
# state will be reset on server start up.
state_file "/var/lib/mpd/mpdstate"
# The location of the sticker database. This is a database which
# manages dynamic information attached to songs.
#sticker_file "~/.mpd/sticker.sql"
# General music daemon options ################################################
# This setting specifies the user that MPD will run as. MPD should never run as
# root and you may use this setting to make MPD change its user ID after
# initialization. This setting is disabled by default and MPD is run as the
# current user.
user "adriaan"
# This setting specifies the group that MPD will run as. If not specified
# primary group of user specified with "user" setting will be used (if set).
# This is useful if MPD needs to be a member of group such as "audio" to
# have permission to use sound card.
group "users"
# This setting sets the address for the daemon to listen on. Careful attention
# should be paid if this is assigned to anything other then the default, any.
# This setting can deny access to control of the daemon.
# For network
#bind_to_address "any"
# And for Unix Socket
#bind_to_address "~/.mpd/socket"
# This setting is the TCP port that is desired for the daemon to get assigned
# to.
#port "6600"
# This setting controls the type of information which is logged. Available
# setting arguments are "default", "secure" or "verbose". The "verbose" setting
# argument is recommended for troubleshooting, though can quickly stretch
# available resources on limited hardware storage.
#log_level "default"
# If you have a problem with your MP3s ending abruptly it is recommended that
# you set this argument to "no" to attempt to fix the problem. If this solves
# the problem, it is highly recommended to fix the MP3 files with vbrfix
# (available from <http://www.willwap.co.uk/Programs/vbrfix.php>), at which
# point gapless MP3 playback can be enabled.
#gapless_mp3_playback "yes"
# This setting enables MPD to create playlists in a format usable by other
# music players.
#save_absolute_paths_in_playlists "no"
# This setting defines a list of tag types that will be extracted during the
# audio file discovery process. Optionally, 'comment' can be added to this
# list.
#metadata_to_use "artist,album,title,track,name,genre,date,composer,performer,disc"
# This setting enables automatic update of MPD's database when files in
# music_directory are changed.
auto_update "yes"
# Limit the depth of the directories being watched, 0 means only watch
# the music directory itself. There is no limit by default.
#auto_update_depth "3"
# Symbolic link behavior ######################################################
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links outside of the configured music_directory.
#follow_outside_symlinks "yes"
# If this setting is set to "yes", MPD will discover audio files by following
# symbolic links inside of the configured music_directory.
#follow_inside_symlinks "yes"
# Zeroconf / Avahi Service Discovery ##########################################
# If this setting is set to "yes", service information will be published with
# Zeroconf / Avahi.
#zeroconf_enabled "yes"
# The argument to this setting will be the Zeroconf / Avahi unique name for
# this MPD server on the network.
#zeroconf_name "Music Player"
# Permissions #################################################################
# If this setting is set, MPD will require password authorization. The password
# can setting can be specified multiple times for different password profiles.
#password "password@read,add,control,admin"
# This setting specifies the permissions a user has who has not yet logged in.
#default_permissions "read,add,control,admin"
# Input #######################################################################
input {
plugin "curl"
# proxy "proxy.isp.com:8080"
# proxy_user "user"
# proxy_password "password"
# Audio Output ################################################################
# MPD supports various audio output types, as well as playing through multiple
# audio outputs at the same time, through multiple audio_output settings
# blocks. Setting this block is optional, though the server will only attempt
# autodetection for one sound card.
# See <http://mpd.wikia.com/wiki/Configuration#Audio_Outputs> for examples of
# other audio outputs.
# An example of an ALSA output:
audio_output {
type "alsa"
name "My ALSA Device"
device "hw:0,0" # optional
# format "44100:16:2" # optional
# mixer_type "hardware" # optional
# mixer_device "default" # optional
# mixer_control "PCM" # optional
# mixer_index "0" # optional
#audio_output {
# type "alsa"
# name "Sound Card"
# options "dev=dmixer"
# device "plug:dmix"
# An example of an OSS output:
#audio_output {
# type "oss"
# name "My OSS Device"
## device "/dev/dsp" # optional
## format "44100:16:2" # optional
## mixer_type "hardware" # optional
## mixer_device "/dev/mixer" # optional
## mixer_control "PCM" # optional
# An example of a shout output (for streaming to Icecast):
#audio_output {
# type "shout"
# encoding "ogg" # optional
# name "My Shout Stream"
# host "localhost"
# port "8000"
# mount "/mpd.ogg"
# password "hackme"
# quality "5.0"
# bitrate "128"
# format "44100:16:1"
## protocol "icecast2" # optional
## user "source" # optional
## description "My Stream Description" # optional
## genre "jazz" # optional
## public "no" # optional
## timeout "2" # optional
## mixer_type "software" # optional
# An example of a recorder output:
#audio_output {
# type "recorder"
# name "My recorder"
# encoder "vorbis" # optional, vorbis or lame
# path "/var/lib/mpd/recorder/mpd.ogg"
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# An example of a httpd output (built-in HTTP streaming server):
#audio_output {
# type "httpd"
# name "My HTTP Stream"
# encoder "vorbis" # optional, vorbis or lame
# port "8000"
# bind_to_address "0.0.0.0" # optional, IPv4 or IPv6
## quality "5.0" # do not define if bitrate is defined
# bitrate "128" # do not define if quality is defined
# format "44100:16:1"
# max_clients "0" # optional 0=no limit
# An example of a pulseaudio output (streaming to a remote pulseaudio server)
#audio_output {
# type "pulse"
# name "My Pulse Output"
## server "remote_server" # optional
## sink "remote_server_sink" # optional
## Example "pipe" output:
#audio_output {
# type "pipe"
# name "my pipe"
# command "aplay -f cd 2>/dev/null"
## Or if you're want to use AudioCompress
# command "AudioCompress -m | aplay -f cd 2>/dev/null"
## Or to send raw PCM stream through PCM:
# command "nc example.org 8765"
# format "44100:16:2"
## An example of a null output (for no audio output):
#audio_output {
# type "null"
# name "My Null Output"
# mixer_type "none" # optional
# This setting will change all decoded audio to be converted to the specified
# format before being passed to the audio outputs. By default, this setting is
# disabled.
#audio_output_format "44100:16:2"
# If MPD has been compiled with libsamplerate support, this setting specifies
# the sample rate converter to use. Possible values can be found in the
# mpd.conf man page or the libsamplerate documentation. By default, this is
# setting is disabled.
#samplerate_converter "Fastest Sinc Interpolator"
# Normalization automatic volume adjustments ##################################
# This setting specifies the type of ReplayGain to use. This setting can have
# the argument "off", "album" or "track". See <http://www.replaygain.org>
# for more details. This setting is off by default.
#replaygain "album"
# This setting sets the pre-amp used for files that have ReplayGain tags. By
# default this setting is disabled.
#replaygain_preamp "0"
# This setting enables on-the-fly normalization volume adjustment. This will
# result in the volume of all playing audio to be adjusted so the output has
# equal "loudness". This setting is disabled by default.
#volume_normalization "no"
# MPD Internal Buffering ######################################################
# This setting adjusts the size of internal decoded audio buffering. Changing
# this may have undesired effects. Don't change this if you don't know what you
# are doing.
#audio_buffer_size "2048"
# This setting controls the percentage of the buffer which is filled before
# beginning to play. Increasing this reduces the chance of audio file skipping,
# at the cost of increased time prior to audio playback.
#buffer_before_play "10%"
# Resource Limitations ########################################################
# These settings are various limitations to prevent MPD from using too many
# resources. Generally, these settings should be minimized to prevent security
# risks, depending on the operating resources.
#connection_timeout "60"
#max_connections "10"
#max_playlist_length "16384"
#max_command_list_size "2048"
#max_output_buffer_size "8192"
# Character Encoding ##########################################################
# If file or directory names do not display correctly for your locale then you
# may need to modify this setting.
filesystem_charset "UTF-8"
# This setting controls the encoding that ID3v1 tags should be converted from.
#id3v1_encoding "ISO-8859-1"
# SIDPlay decoder #############################################################
# songlength_database:
# Location of your songlengths file, as distributed with the HVSC.
# The sidplay plugin checks this for matching MD5 fingerprints.
# See http://www.c64.org/HVSC/DOCUMENTS/Songlengths.faq
# default_songlength:
# This is the default playing time in seconds for songs not in the
# songlength database, or in case you're not using a database.
# A value of 0 means play indefinitely.
# filter:
# Turns the SID filter emulation on or off.
#decoder {
# plugin "sidplay"
# songlength_database "/media/C64Music/DOCUMENTS/Songlengths.txt"
# default_songlength "120"
# filter "true"

milso wrote:
type "alsa"
name "equal"
device "default"
format "44100:16:2" # optional
mixer_device "default" # optional
mixer_control "PCM" # optional
mixer_index "0" # optional
I have mine set to plug:plugequal as I use an equalizer with alsa, but when I set it to default it works fine, try that.
That didn't work out.
Mr.Elendig wrote:Tell mpd to be more verbose. And check that mplayer -ao alsa whatever works.
Here's the output of mpd -v
listen: bind to '0.0.0.0:6600' failed: Address already in use (continuing anyway, because binding to '[::]:6600' succeeded)
path: path_set_fs_charset: fs charset is: UTF-8
database: reading DB
disabling the last.fm playlist plugin because account is not configured
daemon: opening pid file
daemon: daemonized!
daemon: writing pid file
Doesn't contain anything unusual.
EDIT: oh, and mplayer -ao alsa works fine.
Last edited by arthd (2011-02-09 15:14:09)

Why do I get "Missing signed entry" error?

I am distributing jar files that have been signed (by thawte). Sometimes, a certain build will throw up a "Missing signed entry" error when I try to launch the jnlp file.
Why does this happen?
I used add/remove programs (on Windows) to delete the cache.
I am really puzzled by this.
Anyone knows why?
thanks,
Anil

when I did a jar tvf on the obfuscated jar and compared output with a jar tvf on the unobfuscated jar, I found my mistake!
Anil

How to solve the error problem

Hi Devs ...
I have been learning Adobe Flex and using IDE Flash Builder 4. but Im fasing an unsolve able problem in code given bellow..
<?xml version="1.0" encoding="utf-8"?>
<mx:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
                xmlns:mx="library://ns.adobe.com/flex/mx" layout="vertical" minWidth="955" minHeight="600">
    <fx:Declarations>
        
    </fx:Declarations>
    <mx:states>
        <mx:State name="details"> /////////Here comes an error saying:-->State overrides may no longer be explicitly declared. The legacy states                                                                     /////syntax has been deprecated.
            <mx:AddChild position="lastChild">
                <mx:Text text="About Picture" width="200" fontWeight="bold"/>
            </mx:AddChild>
            <mx:AddChild position="lastChild">
                <mx:Text text="this is the picture of futue of Windows" width="200"/>
            </mx:AddChild>
        </mx:State>
    </mx:states>
    <mx:Image source="assets/att66298.jpg" rollOver="currentState='detail'"/>
</mx:Application>
please tell me how to slove this error problem.
Arshay..


<root>
< myxml label="something" >
</root>

<root>
<myxml label="something">
</myxml></root>

How to solve the " Unknown error" problem

hi
can anybody help me to solve " unknown error problem" of blackberry Z10 with "X" symbol at top right of the screen with red color.
And remaining all services (Wifi) are working except the calls.
And also my phone is automatically restarting frequently.
please help me in this regard

Phone restarting randomly could be loose battery. Tighten by putting a small strip of electrical tape on the back edge.
THE BITTERNESS OF POOR QUALITY, LINGERS LONG AFTER THE CHEAPNESS OF PRICE, IS SOON FORGOTTEN.

I am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.

i am not able to sync some videos and apps onto my iphone 3gs. it shows a sync error: 0xe8008001.i updated it but still i am getting the same sync error problem..please help.
aman

Are you using Windows...?

Bex analyzer - internal error problem with table c_t_variable

HI All,
When ever I try to refresh a query in Bex-Analyzer ,Iam getting "internal error problem with table c_t_variable".
Please advise
Edited by: Aparna Duvvuri on Jan 13, 2010 10:53 AM

Hi Aparna,
try to open the query in RSRT and debug the query.the error is due to some customer exit variable so try to debug the code for the variable and rectify it.
Thanks,
Ashok

Fox opens an error (Problem opening page) page when ever I open a new fox window and parks it in upper left corner of my desktop, what is up with this ??

Fox opens an error (Problem opening page) page when ever I open a new fox window and parks it in upper left corner of my desktop, what is up with this ??
It slows down my surfing, a lot and I do not notice the error page, until I notice the slow speed, because it is as small as a page can be, showing only the " -, +, & full size boxes with a border"

Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

Unable to send crash/error problem report

Hi There,
I have recently noticed that when a program I am running either force quits on it's own or I have to manually force quit the program, I am unable to send crash/error problem report to Apple. This has happened for all my programs from Safari and iTunes to recently Microsoft Word. The crashing messed up my internet as I had to give up using Firefox (because it kept crashing and wouldn't send a report) so I downloaded Chrome.
Yesterday, Microsoft Word had to force quit because I manually quit the program but it never closed. It kept running in the background at 192% under my operating processes. When I force quit Word, it gave me the option to report the problem or ignore it. I chose to send a report but once that Problem Report screen loaded, it would not let me send to Apple, stating "Your submission could not be submitted. Please try again later."
I have tried numerous times since all to no avail. As I mentioned, this happens on a lot of programs lately and I don't know what to do to fix it. Below are the specs of my Macbook. I can copy the problem details, but is lengthy.
Any help/feedback is greatly appreciated.

Welcome to Apple Support Communities.
Apple is apparently no longer accepting crash reports for 'Leopard' OS X 10.5.8.
https://discussions.apple.com/message/17544781#17544781
Typical disk-maintenance activities when crashes occur include using Verify, and Repair Permissions on your hard drive (probably labeled Macintosh HD), using Disk Utility.
10% to 15% of hard-drive capacity is generally acknowledged as the minimum amount of free space needed for adequate performance.

PI entry error/problem

Similar Messages

Maybe you are looking for