PI Java VS ABAP Authorizations

Hi,
I'm trying to create an authorization profile for individual support teams for integration.
Using the authorization object S_XMB_MONI, we are able to restrict the users to display/restart/cancel messages belonging to a specific party/service/interface name-namespace in the ABAP stack.
I'm trying to establish the same functionality on the Java stack, specifically in the RWB. If the role SAP_XI_MONITOR_J2EE role is assigned to a user in UME, then he/she gains the authorization to execute actions for all messages, whereas I need to restrict this authorization likely with ABAP using a specific party/service/interface name-namespace again for the Adapte Engine.
As the UME roles are made up of services and relevant actions, I tried to create a custom role, but these actions do not provide any restrictions.
In the end, I want a support group to be able to support only their relevant project by gaining authorizations to execute actions(reprocess, cancel, display etc) for only their messages both in the Integration Engine and the Adapter Engine.
Kindly advise (if) how this can be done in the Java stack.
Regards,
S. Gökhan TOPÇ

It looks like the only way to establish this is using ACLs in J2EE, which is not supported via a GUI as well. And it would take some serious design and development to apply it.
http://help.sap.com/saphelp_nwpi711/helpdata/en/48/c943f3825c581ce10000000a42189c/content.htm

Similar Messages

Java and abap stack connection

Hello,
how to check connection b/w Java and ABAP stack.
I am getting below error :
SAP:Code area="MAPPING">JCO_SYSTEM_FAILURE</SAP:Code>
<SAP:P1>connection to partner 'localhost:0' broken / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 t</SAP:P1>
We did some upgrades of kernel and jvm and started getting this error.
Please suggest

Hi,
Check this threads
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE
JCO_SYSTEM_FAILURE . Pls help
Regards
Ramesh

CRC failed in Java and ABAP Trial Version on Linux - VMware Edition part02

I download SAP NetWeaver 70 - Java and ABAP VMware Trial and I couldn't install it because part02 rar file has reported a checksum error.
- SAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC failed in SLES10SP1_Test_Drive(2)-s003.vmdk. The file is corrupt
Also, I think file SLES10SP1_Test_Drive.vmdk is missing from the archive files.
Could you please, confirm that the archives in the sdn downloads are correct!

I also have the same problem, CRC error:
X:SAPSAP NetWeaver 70 - Java and ABAP VMware Trial.part02.rar: CRC hiba a SLES10SP1_Test_Drive(2)-s003.vmdk-ban. A fájl sérült

Netweaver Data base instances for Java and ABAP

Hello Experts,
Please help me to understand how the two technology stacks of SAP WAS (Java and ABAP) are configured to use underline data base in Netweaver.
Is it manadatory to have two separate data base schemas, one for ABAP applications and other for Java applications in the Netweaver?
If yes..the any idea about what are those schema differences??
- Rajan

Hello Krishna,
Thanks for the reply.
Is there any way I can access these shemas? Are they the same by structure or there are major differences?
My requirement is to build a common schema out of these two and have the data from these two schemas to be consolidated in the new schema.
Any help will be greatly appreciated.
- Rajan

Call java from ABAP

JCo connectivity is used to call RFCs from Java. can i call Java from abap?
thanks in advance.....
regards,
Sundararamaprasad

Hi Sundar ,
This link will surely give u an idea about calling java fro ABAP using Jco.
http://www.thespot4sap.com/Articles/SAP_Netweaver_Java_Connector.asp
regards,
aravindh.

Call to metod in java from abap

Hi,
there is a way to use method of java in abap ?
Regards

If you search Google for
ABAP jco outbound
you should be able to find a wealth of info - for example
[SAP Java Connector (SAP Library - Components of SAP Communication ...|http://help.sap.com/saphelp_nw04/helpdata/en/6f/1bd5c6a85b11d6b28500508b5d5211/frameset.htm]
Jonathan

BI setup: WebAS ABAP Setting - Java to ABAP communication problem

Hello,
i've got a problem during intallation of BI in Netweaver 2004s. The Diagnostics & Support Desktop Tool reports errors in WebAS ABAP Settings. These errors are:
- "Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018)" with the suggested solution "Check Connector Connection of System Object in Portal System Landscape". What does it mean?
- "Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination <destination>" and "Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination <destination>" with suggested solution "Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway." Run of transaction SM59 returns no errors.
Further i've take a look in the log 'dev_jrfc.trc' and there i found the errors:
- Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSRD_MAP_TO_PORTAL_USERS not found on host <host>
- Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_RFC_SERVICE_TEST not found on host <host>
- Exception thrown by application running in JCo Server
java.lang.RuntimeException: Bean RSWR_PREEXECUTION_PROXY not found on host <host>
Can these errors be the cause of the WebAS ABAP Setting error displayed in the Diagnostics & Support Desktop Tool? How they can be solved?
Thanks for your help,
Martin

Hello Chetan,
thanks for your response. Maybe i've described my problem not clear enough. There is no problem of installation and usage of support & dektop tool, but of installation of BI. The support & dektop tool indicates the errors described above with no other hints. My questions is, if anybody knows, what is the cause of the errors and what i must do, to install BI correctly.
Cheers,
Martin

Corrupt ? : Java and ABAP Trial Version on Linux - VMware Edition

Has anyone been successfull in downloading / running the brand new testdrive "Netweaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition" ?
I tried downloading it twice, but it appears the second file (part2.rar) is corrupt.
unpacking gives a CRC error on file 'SLES10SP1_Test_Drive(2)-s003.vmdk.
Thanks & Best regards,
Jeroen Engelen
SAP Netweaver Technology consultant

Hello all,
You have to follow instruction on this side>
http://www.novell.com/documentation/sles10/esd/ii_sap_testdrive_sles10sp1_vmware1.html
YOu need to download
part1 > which is soft from NOvell called
SAP Test Drive "SLES10SP1VSAP.rar"
Maybe this link help you "http://download.novell.com/index.jsp?product_id=&search=Search&families=2658&version=8161&date_range=&keywords=&sort_by=&x=14&y=7
After donwload from sdn part two
SAP NetWeaver 7.0 - Java and ABAP Trial Version on Linux - VMware Edition
from sdn Downloads.
YOu need to use VMWARE soft to start up SLES 10 (part1) and after that use SLES to start up SAP.
But here I have problem I can not login to SLES as I don't know passwrod, I was trying to found it at novell web site or SAP without any sucess.
So at this point I am stuck
Here is the same qeustion from Jim Jiang and me
what is user name and password for SLES10 SP1 SAP Version
Hope this give you overview what needs to be done, to start up Trial SAP version
Peter Nechala

Error while creating connection between Java and ABAP

Experts
I am getting the following error message when I am trying to test the connection between JAVA and ABAP systems.
1. The system ID is valid
2. The system was retrieved.
3. The system object represents an SAP system
4. The following parameters are valid: Web AS Protocol (http) Web AS Host Name (s09f71v06.svr.bankone.net:8100)
5. The host name s09f71v06.svr.bankone.net was resolved successfully.
6. The server s09f71v06.svr.bankone.net *could not be pinged* successfully.
I have JAVA and ABAP on the same system. I am trying to establish a connection. I have checked all the settings and they looks fine. I have also pinged from other system to this server and the Ping works fine.
Please do let m eknow where do I need to check for the errros or logs for the above error message.
Appreciate your quick help.
Mahesh

Check the relevant services are test are active on the Backend system through SICF trransaction.
Also make sure that default icm services are running.See note 517484.
More important the connector test in the portal system should work properly,recheck the WAS path etc are correct.
Regards
Ajay

SMSY for ERP JAVA and ABAP Stack

Hi Folks - I have installed SAP ERP 6.0 EHP5 in one database called T12. Now there is a need for a Java stack and I have installed the Java stack in another database called J12.
I was able to define the ABAP stack on system landscape and MOPZ is working fine. However, I am not sure how I should go about the Java (J12) instance definidstion on SMSY.
I am using Somlam 7.1 on Oracle Linux system.
ABAP stack is on ERL 6.0 EHP5 and Java stack is Netweaver 7.0 EHP2.
J12 and T12 systems are connected via JCO.
SLD has been defined for both stacks and they are using the local SLD for the SolMan.
Your help is much appriciated.

Sunny - I checked the SLD and It is working fine. There were couple of issues that I fixed. Since I defined the Java system manually I delete it. Hopefully SLD will populate the definition.
In same note, Would it be possible that installing ERP java and ABAP stack on different hosts (stand alone) is causing this issue, especially they are using different Sid's?
I was reading SAP Note 1344564, It states
III.Some Main Instances include other Main Instances (E.g., in SAP
ERP 6.0, Main Instance SAP NW - Enterprise Portal includes SAP NW -
EP Core.). If the including Main Instance is installed, it's not
necessary to mark the included Main Instance(s) for relevance.
Is this mean in SMSY I do not have to define any product for the Java engine? When installing the Java, I had to create the product manually to be able to generate the installation key.
Your input is appreciated.
Edited by: kourosh Ghouchkhani on Nov 22, 2011 1:20 AM

Communicate link between Java and ABAP Stack for https

I have configured https in both the java and abap stacks (we have a double stack configuration). Due to our future configuration I have changed the hostnames to fully qualified hostnames per SAP instructions.
The question I have is does anyone know what RFC destinations or JCo settings I need to change to make https complete?
I have the problem where when I fire off the Integration Builder from within the ABAP stack (SXMB_IFR) I get a straight hostname (no domain name). Where is this configured? Any help is appreciated..

Check the exchange profile (Administratio tab in /rep/start/index.jsp page; you will have to enter it manually since it is throwing error from SXMB_IFR).
Regards,
Henrique.

JAVA and ABAP stack support pakages

Hi,
I am new on installation of solution manager server.
I just install solution manager server EHP1 on windows 2003. Now I want to patch my server.
I have abap and java stack on my server. Can I use jspm to upload my new patches for both Java and ABAP stack or I should use SPAM for abap stack and jspm for java.
Thanks Reza

Hello Reza,
Just to clarify, Best practise is to update your kernel to the latest before you start patching in your system.
So download SAPEXE.SAR (Database independent kernel package), SAPEXEDB (Database dependent kernel package) and IGSEXE.SAR (IGS Package) from the SMP. kernel is dependent on your operating system and database and therefore make sure you download the right package otherwise you'll end up in messing up the system.
follow SAPnote # 19466 for help.
Once you are done with the kernel update then patch you Abap stack by SPAM and JAva stack by JSPM.
I hope that makes things clear.
Best Regards
NIraj

Java and ABAP Stack

Hi All,
I am still not clear about role/function of java and abap stack in XI.
Can anybody explain?

Sireesha,
Tha ABAP stack consists of the Integration Server which in turn contains your Integration Engine and Business Process Engine.
The J2EE stack contains the Adapter Engine and your IR and ID run on the J2EE engine.
Most of XI pipelines happens in the ABAP stack.
All messsages picked by the Adapter Framework running on the J2EE engine are passed to the Integration Engine, which does the routing. The mapping program again gets executed on the Java stack and the rest of the pipeline servies are executed again on the ABAP stack and so on.
please go through links::
ABAP and JAVA in Netweaver stack
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/4aa47d27-0a01-0010-5db4-bb62dfc8c069?prtmode=navigate

How to pass variable from Java to ABAP in BSPs

Hello experts,
taking into account the two environments (browser and server) I need to pass information from Java to ABAP.
After seen this link: Re: View Refresh
I have tried the next:
HTMLB: <input type="hidden" name="myFlag" value="">
ABAP:   DATA: lv_height TYPE STRING.
JAVA:   var intXo = readCookie("XEix");
JAVA:   if ( intXo == 900 )
JAVA:   else if (intXo == 725 )
ABAP:   lv_height = request->get_form_field( 'myFlag' ).
ABAP:   IF lv_height EQ 'X'.
ABAP:     TRAYTAREAS_P = 'TRUE'.
ABAP:   ELSE.
ABAP:     TRAYTAREAS_P = 'FALSE'.
ABAP:   ENDIF.
"document.all.myFlag.value" gets the correct value according the condition, but the ABAP code does not recover this value (lv_height is always initial).
Can you help me with that? I'm not able to see where is the mistake...
Exist any alternative way to recover in ABAP an JavaScrip value?
thanks in advance.
Arnau
Message was edited by:
        Arnau Mustieles

Hi Raja
I think you are appointing to this posted solution:
HTMLB: <input type="hidden" name="myFlag" value="">
ABAP: DATA: lv_height TYPE STRING.
JAVA: var intXo = readCookie("XEix");
JAVA: if ( intXo == 900 )
JAVA: else if (intXo == 725 )
ABAP: lv_height = request->get_form_field( 'myFlag' ).
ABAP: IF lv_height EQ 'X'.
ABAP: TRAYTAREAS_P = 'TRUE'.
ABAP: ELSE.
ABAP: TRAYTAREAS_P = 'FALSE'.
ABAP: ENDIF.
but it doesn't work. Can you detect if there is any evident error there or the process is right?

Communication between Abap and Java and Java to Abap

HI,
I have installed BI 7.0 and the user complaints that BEx WEB Application Designer Query results are not showing up in the WEB URL Link.
and the BI user suggests that communication between Abap to java and Java to Abap has to be done?
How to setup ABAP to JAVA and JAVA to ABAP communication?
Regards,
Magham.

Hi,
Jco conn from ABAP to Java
=====================
You can use the JCO RFC Provider Service of the Web Application Server for your ABAP to Java calls.
The steps involved in that are
1. Configure destination in SM59 in SAP.
2. Create RFC Destination in Visual Admin.
3. Create a stateless session bean with JNDI name as the name of calling function module in SAP.
4. Add a business method public void processFunction(JCO.Funtion fn) which is called by the JCO RFC Provider Service. The name should be 'processFunction'.
5. Set library references in application-j2ee-engine.xml to type weak for the following
a. com.sap.mw.jco.
b. com.sap.tc.Logging (if you are using the logging api )
Here is the sample code for the EJB biz method
Business Method.
public void processFunction(JCO.Function function) {
try {
// Get the import parameters for the function module
JCO.ParameterList importList = function.getImportParameterList();
logger.infoT("The value sent is" +
(String)importList.getValue("USER_NAME"));
// Set the export parameter value for the function module
JCO.ParameterList export = function.getExportParameterList();
export.setValue("From EJB", "RETURN");
function.setExportParameterList(export);
catch (java.lang.Exception e) {
e.printStackTrace();
Jco conn from Java to others(ex:ABAP)
=====================-==========
Open Visual Admin(C:\usr\sap\SID\JCxx\j2ee\admin\go.bat) and connect to server
Go to Destinations service
Open HTTP Settings Tab
Add/Edit destination SLD_DataSupplier and type following values
URL http://xyz.corp:53000
Authentication - BASIC
User dynproxxx
Password - bp52st000
Press save and test (if you get response code 200 everything is o.k.)
Add/Edit other HTTP Destination named SLD_Client with the same values as SLD_DataSupplier:
URL http://xyz.corp:53000
Authentication - BASIC
User dynproxxx
Password - bp52st000
Press save and test (if you get response code 200 everything is o.k.)
Go to SLD Data Supplier service.
Press the button named: Send the Data to SLD and confirm triggering SLD Data transfer (if you receive successful message everything is o.k.).
===================
following blog might helpfull
=======================
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
for basic infor
==============
http://help.sap.com/saphelp_nw04s/helpdata/en/21/84570b3ae14e77b3047c82218974b9/frameset.htm
Award points if it helps

PI Java VS ABAP Authorizations

Similar Messages

Maybe you are looking for