PI post configuration error

Doing XI/PI post install configuration. ALL JCO RFC setup done even SLD working but while logging to IR then import s/w component version shows unable to read software component versions from SLD.
Our team checked everything. Even SLD is running file.
Please provide clue if anybody faced similar problem.

Hi,
Have you imported all cim/CR related design time objects ? Also what is your SLDCHECK output ?
The following RFCs should be working :-
AI_RUNTIME_<SID>
SAPSLDAPI_<SID>
AI_VALIDATION_<SID>
LCRSAPRFC_<SID>
Please refer the following notes :-
Note 1309239 - Configuration Wizard: PI NetWeaver initial setup
Note 1117249 - Incomplete Registration of PI components in SLD
Note 940309 - Change PI default client after NW 7.0 Installation
Regards

Similar Messages

Report Viewer Configuration Error

Hi,
I manage a TFS 2010 Server that makes heavy use of Reporting Services, and I have a user that reported the following error
when attempting to open a report in the Microsoft Visual Studio Report Viewer:
Report Viewer Configuration Error
The Report Viewer Web Control HTTP Handler has not been registered in the application's web.config file. Add <add verb="*" path="Resevred.ReportViewerWebControl.xsd" type = "Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer,
Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.web/httpHandlers section of the web.config file, or add <add name="ReportViewerWebControlHandler" preCondition="integratedMode" verb="*"
path="Reserved.ReportViewerWebControl.axd" type="Microsoft.Reporting.WebForms.HttpHandler, ReportingServicesWebServer, Version=10.0.0.0, Culture=neutral, PublicKeyToken=################" /> to the system.webServer/handlers section for
Internet Information Services 7 or later.
Has anyone seen this error before, or have any advice on finding a solution?
Thank you.

Hi HealthServices3300,
You can try to install "Microsoft Report Viewer 2010 Redistributable Package" on your server to check if it works for you.
For the web.config info, it's for web application. And I'd like to know how did you create the report, and whether the report is for a web app or reporting service. From the error message and report, seems it's not a TFS issue. If it's SSRS project
issue, please post this issue to
this forum. If it's a report viewer control issue, you can post this issue in
this forum for a professional response. After that, please update this thread with the new thread link. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

IP Configuration Error - IP address in use by another device

My parents' have set up a wirless netwrok in their home but are experiencing a IP configuration error.
They have Cable Broadband going into a cable modem. The modem is connected to a DLINK router via ethernet. The router has an ethernet connection to one computer (PC running Windows 2000) and an ethernet connection to a NETGEAR Wall-Plugged Ethernet Bridge XE102 which provides a wireless connection for an iMac G5 in another room.
The PC and the iMac are able to connect to the Internet without any problems. However, my PowerBook can see the NETGEAR network but it can access the Internet through it. The following error message keeps popping up:
IP Configuration Error
192.168.0.100 in use by 00:13:46:6d:26:11, DHCP SErver 192.168.0.1.
I read some previous posts that indicated it may be a problem with an IP address being assigned to a printer (and they do have an HP PSC connected by USB to the PC).
I can't seem to figure out how to free up the IP address. I checked the router settings and it is configured to assign more than just two or three.
Any ideas? Thanks in advanced.

Have you tried resetting your router and reseting your cable modem this should Asign all new IP address to all of the Computers on the network.
To reset your modem unplug it and leave it out for about 3 min and then replug it and the router should either have a reset button on it or from your computer you should be able to reset it.
I think your going to need to change your IP address but try resetting everything first.
see here.
http://forums.livingwithstyle.com/archive/index.php/how-change-your-static-t1847 50p1.html
Also this site will help if you change the PC's Address
http://support.microsoft.com/default.aspx?scid=kb;en-us;308199&sd=tech

Configuration Error 15: CS5 Photoshop for Mac OSX

I have been running Photoshop on my computer for quite a while. This morning, when I tried to open the program, I received a Configuration Error: 15 and was told to uninstall and reinstall the program. I did this (twice), and still receive the same error.
I searched all throughout the forums, and the only answer I could find was in regards to error 16 (seems like a similar problem), and followed this link: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Unfortunately, my computer does not appear to have the SLS Store or Adobe PCD folders in the Library/Application Support/Adobe folder, so I cannot try this solution to see if it works for me.
I have successfully opened InDesign, Illustrator and Dreamweaver today. Only Photoshop is not working.
Any help would be greatly appreciated.
Thank you.

None of my FULL PRICE CS6 Creative suite works, or Adobe Acrobat xi PRO.
all error 16
followed instructions on link. Does absolutly nothing. Wated 4k over 2 years on Adobe. I removed and un-installed all products, per Adobe instructions, re-installed. same problem. re-installed Maverics. same problem.
Contacted Apple was told it was a liceincing issue with adobe server and to contact Adobe for patch. Adobe charges for tech support when you buy their products. Nothing like buying a new car, then having to rent the Keys!
Adobe feel free to adress your cutomer base at anytime as we are all having problems.
If anyone finds answer or can understand the person on the tech support please post answer.

Configuration error - please uninstall and reinstall the product

Configuration error - please uninstall and reinstall the product - Installieren lässt sich Indesign jedoch nicht
Da frage ich mich, was zu tun ist
thank you

Hi tututinu
Please refer the below KB Doc : http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
Or check the below forum post : http://forums.adobe.com/message/3008803

SAP PI 7.0 post configuration

Hi,
I have installed SAP PI 7.0 and completed all the post configuration steps. But still even I am not getting the <b>Adapter Engine : value ( as Integration Server )</b> while creating communication channel.
Anyone can help me...it is very urgent..please
Thanks
Apparao.

Hi
Is this the error u are getting
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
Just have a lok at this post installationsteps.
http://help.sap.com/saphelp_nw70/helpdata/en/4b/c25a42793d1653e10000000a155106/frameset.htm

Photoshop CS6 on Windows 8 gives Configuration Error 16 when launched

I am completely at a loss as to correcting this issue. I installed Windows 8 a few weeks ago and everything went smooth. Ive been using Photoshop CS6 (as part of Creative Suite CS6) with little to no problems until a few days ago when I started
recieving the following error:
Configuration Error
Please Uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
http://www.adobe.com/support/
I unintall/reinstalled the software and it started working again until this morning when it started doing the same thing.
Please, anyone have a solution for this? Im in the middle of my final project for my photography/photoshop class and cannot seem to get this working correctly.
Thanks in advance for any help.

Dear Jeff - Thanks for that - I had seen those notes on the adobe help site, but, the instructions given don't seem to apply exactly to Windows 8.1 as when I looked them up, I couldn't find the network path specified in the help document you reference:
Windows 32 bit (XP, Vista, 7): \Program Files\Common Files\Adobe\Installers\
Windows 64 bit (XP, Vista, 7): \Program Files(x86)\Common Files\Adobe\Installers\
because on my windows 8.1 machine, in the "Adobe" folder there was no "installer" folder.
Since I wasn't sure how to find the error log, My first "Troubleshooting" move was to de-install the program (Adobe Design Standard CS6) and then re-download the file from the adobe site here: http://www.adobe.com/downloads/other-downloads.html
However, at the moment, the problem seems to be ok, so I guess that perhaps that fixed the problem? Fingers crossed!
For future reference (or in case someone else is looking at this posting with a similar issue?) do you know how to find the error log on an installation on Windows 8.1? Thanks!

Configuration Error Error:16

I have installed the Flash/Flex builder 4 on 30 machines running Mac OS 10.5.8 and they were all fine and now I am getting an error on all of them about a configuration error. Please uninstall and reinstall the product. I have done this on a few to test and still get the error.
If I keep trying to launch the application it will eventually work and open. Then if you try to launch it again I get the same error.
Anyone know of any fixes I can do remotely to all the machines at once? I hate to have to visit each station to fix the issue, but not sure whats going to fix it since a reinstall doesn't fix it.
I read on another thread that deleting the cache file worked for someone, but then someone else posted that you have to put in serials for all adobe software after that. http://forums.adobe.com/thread/604540
Help please!!

Checking permissions on the /Library/Application Support/Adobe/Adobe PCD/pcd.db and /Library/Application Support/Adobe/Adobe PCD/cache/cache.db and the permissions on both files are:
-rw-rw-r--
Should they be set this way or should user have w as well?
Thanks!!

Xi post configuration

Hi,
while doing Xi post configuration. In TCode SWF_XI_CUSTOMIZING all services are activated except schedule background job for deadline monitoring. The following error is coming.
Error within method CL_SWF_ADM_JOB_FACTORY=>GET_INSTANCE->Automatic 12.11.2008 09:44:49 SAP_BASIS Schedule Background Job for Deadline Monitoring

Hi,
Check the sap note no. 1117735
Implement the attached correction instructions from SAP note 1117735. You must then make the following manual changes:
Call transaction SM30.
Maintain the view SWFCTASK.
Delete all the rows (usually two).
Customizing Object = "CL_SWF_CST_DEADL_SERVICE_JOB"
Save your changes.
As an alternative, you can import the relevant Support Package.
Thanks!

Hyperion Shared Services Configuration Error with Weblogic 9.2

Hi All,
I have been trying to configure Hyperion Shared Services 9.3.1 with Weblogic Ver 9.2
During configuration of the Database and the Application Server, I select Manual Configuration option on Weblogic 9
However, it returns a configuration failure everytime of the Database.
In my case, the DB used is SQL 2005.
Can someone, please advise me.
Thanks in advance
Regards,
Apo

Hi Apo,
Check the configtool.log in the logs/config folder and post the error message that is being returned.
Thanks
Nick

EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry.

Hi,
I am getting Below error in RHEL 6.5
EPM Configurator Error "Failed to navigate from RegistryWizardState: Error while initializing registry. See logs for more details" while configuring Essbase Server on 64 bit OS using Oracle Database
Any help...?

Hi ,
This community is to discuss Oracle Application Server specific issues, you can post this query in the below Hyperion Forms for better response:
Hyperion EPM
[OR]
Oracle Hyperion EPM (MOSC)
[OR]
Hyperion Certification for EPM (MOSC)
Regards,
Prakash.

Trying to install iTunes and get this error: "The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"

HELP!!!
I am trying to install iTunes on my Windows 7 laptop and get this error:
"The installer encountered errors before iTunes could be configured   Errors occurred during installation. Your system has not been modified"
Arghhhhh!! I've tried different browsers and various other things suggested on other posts to no avail

Ok people, I think I have found the solution !
If you click on the start button from your desktop screen.
Then in the "search programs and files" field type : apple software update - you can find the apple installer.
Click on the apple software update line and let the machine run it's course. I recommend updating whatever it wants to , ie: safari 5, quicktime, itunes....
I then restarted my computer and it seems to be working now !
Good luck everyone !

Configuration Error - Error 6 - Flash Builder 4 Plug In

Upon starting eclipse (after installing the fb4 plug in) I get a 'Configuration Error' error 6. Anyone have any ideas as to what this is and how to get over it. At the moment I cant even trial the software which I am evaluating for our company. I am not a flex / java dev so please assume an astounding level of ignorance! I have reinstalled several times and also tried with various different versions of Eclipse including the bundled option (which I do not particularly want to be forced to use anyway).... all of this to no avail. Version inf follows:-
OSX 10.6.1
Eclipse = Helios, latest release
Thanks in advance.

Hi,
Are you using a Carbon version of Helios? There aren't many of those posted (most are Cocoa), but I think the SDK distro is still offered in Carbon flavor.
If that alone doesn't help, try looking for your error in these tables:
http://kb2.adobe.com/cps/834/cpsid_83481.html
Though FB4 Plug-in is not exactly a CS5 app, it uses CS5 install/licensing libraries, so the same solutions would probably apply.
-Chris

Configuration error while deploying beans

Hi ,
I am trying to deploy entity beans. While deploying I am getting the
following error. I checked weblogic_classpath. It has got .\classes. Any
help is highly appreciated. Find the attached start script.
EXCEPTION DESCRIPTION: Configuration error. Class weblogic.jdbc.jts.Driver
not found.
at
TOPLink.Public.Exceptions.DatabaseException.configurationErrorClassNotFound(
DatabaseException.java:54)
at
TOPLink.Public.Sessions.DefaultConnector.loadDriver(DefaultConnector.java:11
6)
at
TOPLink.Public.Sessions.DefaultConnector.connect(DefaultConnector.java:54)
at
TOPLink.Public.PublicInterface.JDBCLogin.connect(JDBCLogin.java:180)
at
TOPLink.Private.DatabaseAccess.DatabaseAccessor.p(DatabaseAccessor.java)
at
TOPLink.Private.DatabaseAccess.DatabaseAccessor.connect(DatabaseAccessor.jav
a)
at
TOPLink.Public.ThreeTier.ConnectionPool.buildConnection(ConnectionPool.java:
86)
at
TOPLink.Public.ThreeTier.ExternalConnectionPool.startUp(ExternalConnectionPo
ol.java:91)
at
TOPLink.Public.ThreeTier.ServerSession.connect(ServerSession.java, Compiled
Code)
at
TOPLink.Public.PublicInterface.DatabaseSession.login(DatabaseSession.java:36
3)
at
TOPLink.Private.EJB.WebLogic.DeploymentManager.sessionLogin(DeploymentManage
r.java)
at
TOPLink.Private.EJB.WebLogic.DeploymentManager.setup(DeploymentManager.java)
[startWebLogic.cmd]

Post Author: ejthunder
CA Forum: Deployment
It looks like you're trying to deploy with the CR.NET merge modules for VS2003. You'll need to deploy the CR.NET merge modules for VS2005 instead.
You can find the merge modules for the various versions at this link on the BOBJ site:http://support.businessobjects.com/downloads/merge_modules.asp
Choose the correct version. If you're using the bundled edition of CR.NET that ships with VS2005 - CR.NET 2005, then click on the link for VS2005. If you're using CR XI Developer, or CR XI R2 Developer then click on the link for the version you're using.
The CR.NET 2005 merge modules have deployment instructions in the download.
I hope this helps!
EJ

I am trying to download itunes and keep getting a configure error message...anyone...help!

I am trting to download itunes again and it comes up with a configure error message...anyone...help!

Since this a problem pertaining to the iTunes application, you might have better luck posting this in the iTunes forum.
https://discussions.apple.com/community/itunes
B-rock

PI post configuration error

Similar Messages

Maybe you are looking for