PI Production IE is in red

Hi all,
I can see IE is in red
but there are no failed messages in SXMB_MONI & Message Monitoring
But I could see CCMS ststus under IE is red .can anyone help with this?

Hi Sahana,
You are having error on CCMS status which is responsible for alerting .
You do not have any message processing error on sxmb_moni/message monitor why because below status must be green ....
Can the SLD be reached ...
Does the Integration Engine know the business system....
If above component having error then u will get error message on processing .
Error on CCMS status will not effect on message processing.
Thanks and regards,
Anup Banerjee

Similar Messages

Fluro bright red, Pantone/CMYK color value?

Hi all does anyone know what Pantone value/color/PMS/CMYK this scortching hot fluro red/orange color I see everyone using these days?
I know multiple formula 1 teams use it.
Eg. These photo probably dont do the brightness of it justice.
http://www.formulaworldshop.com/images/autographs/a8hamiltontshirtom5.jpg
http://www.ehattons.com/images/products/CC56401_1473806_Qty1_cat.jpg
The red is also used on their website
http://www.mclaren.com/
but again its probably not quite bright enough compared with when you see it in real life printed on a shirt or on the side of their cars.
Does Pantone now do a fluro chart or something, or something to do with their GO Pantone chart mathcing system? I've got the system before the GO one came out.
Any help would be great

It's probably an FS or RAL color. I'm sure there's some Pantone equivalent special ink somewhere, but I wouldn't go crazy over it. This is probably something that will have to be handled in teh actual production either way and you should be able to use a placeholder color in the meantime...
Mylenium

Adobe Acrobat X Pro

I am unable to open my Adobe Acrobat X Pro. Version 10.1.3. Either as a program, or to open a specific file.
Appears listed in my software programs correctly.
Does not matter if I try to open from desktop, program shortcut list or program list, as administrator or user.
I have had the product as part of Creative Suite 6 since mid-May and it has worked until around 10 days ago?
The only other hint I can offer is in iHelp, all listed product names have a red Adobe icon beside them, except "Using Acrobat X Pro" which has a similar looking green icon. It claims to be Current and has a download date (of today, as I tried to Delete and Update).
Thoughts please?

Thank you Mylenium.
I went through this process, to no avail in the end. But an error message from this process did lead me to another thread http://forums.adobe.com/thread/1029593.
Deactivating and Reactivating has done the trick.
Thanks,

[JS CS3] Setting the default layer

I've been through the ID JS DOM, and I can't seem to find a reference for this...I think I'm missing something basic here.
I've created two new layers via JavaScript:
myDoc.layers.add ({name: 'manufacturers index', layerColor: UIColors.green});
myDoc.layers.add ({name: 'product index', layerColor: UIColors.red});
After running the script, the document is left in a state where "product index" is the target layer, and any new objects that are created are created on that layer.
I want the script to leave the document in a state where the original "Layer 1" in the file is the target layer. How do I do this via JavaScript?

Hi Keith,
myDoc.activeLayer = myDoc.layers.item("Layer 1");
Kasyan

RAC - NON RAC ebiz clone

The title says it all... We are running eBusiness Suite 11.5.10.2 in Production on RAC 10gR2 (red hat linux, split application and database tiers). Is there a tried, tested and reliable way to clone from the Production RAC environment to a development environment which is non RAC?
Thanks in advance
IH

That scenario is covered in the rapid clone doc:
Cloning Oracle Applications Release 11i with Rapid Clone
http://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=230672.1
Note: To clone from RAC to non-RAC, follow the same above steps but copy the master ORACLE_HOME to one target node only, and answer "No" to the question "Target instance is a Real Application Cluster (RAC) instance (y/n)", when prompted by adcfgclone.pl.

[ADF EMG] Update: ADF EMG Oracle Open World 2010 Unconference Sessions

I teased in a previous forum post that I'd reserve publishing details about the ADF EMG Oracle Open World 2010 Unconference sessions till later. Well later is now, and I'm (you guessed it) excited to announce we have another full schedule at the Unconference. Read below for more details:
Where and when?
Location: Hotel Parc 55, 3rd Floor, Mason Room
Map: http://www.parc55hotel.com/map-and-directions
Date/time: Wednesday 22nd Sept 10:00-12:00
Duration: 120min
Topics and Speakers
Oracle ADF 11g and Oracle WebCenter 11g Production Demo
Andrejus Baranovskis - Red Samurai Consulting
During his session Andrejus will demonstrate two production systems, the first a retail system, and the second for the education sector. Both systems are based on a standard Oracle development architecture - utilising ADF BC, ADF Task Flows, ADF Libraries and Oracle's ADF UI Shell. The second system in addition implements Oracle WebCenter Services - Composer, Discussions, Document Management and RSS feeds, providing a Web 2.0 platform.
ADF BC 10g and ADF Faces 10g to ADF BC 11g and Trinidad, Live!
John Flack – Information Engineer Synectics for Management Decisions, Inc.
John will run a live lets-get-down-and-dirty demonstration of migrating a small ADF BC 10g/ADF Faces 10g application to ADF BC 11g and Apache MyFaces Trinidad. This will include steps to make the migration easier, the migration wizard, and how to clean up the application after migration, as well some differences between ADF Faces 10g and Trinidad. John will also show some steps needed which aren't documented, from some hard-earned real-life experience.
Demonstration of UW-Madison's Scholarship Application
Todd Hill & Ed O'Connor-Giles – Development Services Specialist and Technical Leader at the University of Wisconsin
University of Wisconsin-Madison automates management, evaluation, and awarding of scholarships -- and the online application experience for students -- with an application built on Oracle ADF. In this session Todd and Ed from the university will demonstrate the application and their technical approach, discuss the many real-world technical challenges faced, and lessons learned in the course of the project.
Integrating 3rd party tools/frameworks into ADF
Gert Leenders - Product Manager at Axi Nv
Gert will discuss their latest ADF project resulting in a real Java technology mash-up showing how ADF can be integrated with several different product. The core remains ADF but for the management of the business processes his team integrated JBoss jBPM, JBoss Drools as a business rule engine, and last but not least Alfresco & UCM as a content repository through the use of CMIS.
ADF - How much do you really need to know?
Sten Vesterli
How much knowledge is enough? You could spend months or even years learning to master all aspects of ADF Business Components and ADF Faces, but you already know that you don't need to know everything. This presentations proposes a set of ADF skill levels and a way to classify application complexity - and a way to map these, so you know what skill levels you need in order to build a given application.
Don't forget...
Don't forget that the ADF EMG also has an on-schedule session on Sunday 19th:
Session ID: S313445
Location: Moscone West, Level 3, Room 3012
Date/time: Sunday 19th Sept 14:00-15:00
...with the following well respected ADF and JSF speakers:
• Frank Nimphius
• Kito Mann
• Aino Andriessen
• Sten Vesterli
We look forward to seeing you in San Francisco!

Please note the Wednesday sessions have moved room to the Mason room. Same hotel, same date & time, just different room. The original post above has been changed.
The Sunday session is still Moscone West Level 3 Room 3012.
CM.

Determine if database view column is foreign key in underlying table

Hi,
I have posted this same question to the General Database Discussions and JDBC forums.
I am using Oracle database 10g (10.1.0.4.0 - 64 bit production) standard edition on Red Hat Enterprise Linux AS release 3, JDK 1.4.2 and the latest Oracle JDBC (thin) driver.
We have a java GUI application that is a front-end for our database. Some of the data entry screens display data from database views. If a column in the view is a foreign key in the underlying table, we want to display a combo-box with the valid values so that the user can choose a correct value.
Is there some way to know whether a column in a view is a foreign key in the view's underlying table?
Thanks,
Avi.

I take that back.. I did figure something out for ya.. After reading some elses post I wrote this code... but its time to go home... I believe this will show you all the constraints and constraint types for the underlying tables of all the views for a user. You can mess with it and get it to return only FK (constraint_type = 'R') and only for a single view if ya like... The all_dependencies data dictionary view is the key to this whole operation...
select con.table_name, ucc.column_name, con.constraint_name, con.constraint_type
from all_constraints con, all_cons_columns ucc
where con.owner = user and
con.owner = ucc.owner and
con.table_name = ucc.table_name and
con.table_name in
(SELECT referenced_name
FROM all_dependencies
WHERE referenced_owner = USER
AND referenced_type = 'TABLE'
AND type = 'VIEW');

Order by "piece of a name"

Hello,
I was wondering if it would be possible order sql results
from a mysql database by a piece of a name. For instance, all the
product names that contain "red" should come first such as:
Red Flashligh deluxe or Redundant lights or whatever. I have
good seo reasons to do this automatically, but i do not know how.
It would have to look something like this:
SELECT *
FROM products
ORDER BY Productname (WHEN IT CONTAINS "RED") ASC

SyKeSnr1 wrote:
>
quote:
Originally posted by:
bregent
> >There might be other ways of doing this, but a very
simple approach
> >would be to use two recordsets:
>
> Using that approach, he could also try using a UNION to
combine the query
> results.
>
>
> Isnt there something like:
>
> Order by LIKE '%red%' First and then NOT LIKE '%red%'
>
> Or something simple and efficient like that? If not, is
there a way to
> manually (by for instance giving the sql code 9 product
id's) get 9 handpicked
> products on the top of the list first and then the rest?
This would also be an
> alternative for me...
Add another column into your database called order, default
it 0, then
once you have 0 set for all your records, change the top 9 to
have a
number higher than 0.
Then you:
ORDER BY order DESC, Products
That way you get all your top products at the top, and the
rest will be
in normal alphanumeric order.
Or, you could set all records to 1, then set the top ones to
0
and
ORDER BY order, Products
Either will work. If you go with the first one the record
with the
highest order will be first.
Steve

Is possible forecast from DP to PPDS w characteristic use with CDP block?

We have set up a test scenario with CDP (Characteristic Dependant Planning) setting to utilize Block Planning and I want to send the demand quantities from DP to PPDS, in a way that the characteristic sent with the Demand Plan (eg Product, Location and Colour = Red) will then match the block when creating the PPDS order (eg Block = Colour Red)
I have tried 2 methods so far which have not worked, and I am wanting to find out if it is possible to send demand planning volumes to use with PPDS CDP Blocks?
Following the process outlined in these areas
Planning with Characteristics
http://help.sap.com/saphelp_scm70/helpdata/en/fa/e943401a306f13e10000000a1550b0/frameset.htm
PPDS and planning with characteristics
http://help.sap.com/saphelp_scm70/helpdata/en/a2/90b83b06855a4ae10000000a11402f/frameset.htm
Cannot use CBF and CDP together on the one client
I have tried these 2 methods.
1. Setting up CBF (Characteristic Based Forecasting) in DP and trying to send these to PPDS CDP. That was before I found the above help guide that tells me this is not possible. The data went across from DP to PPDS, but the results were a mess, the wrong values to the wrong characteristics.
2. Tried sending Demand planning with standard characteristics from DP to PPDS, and this initially looked like it would work. Consumption group, Product, Location, ZCOLOUR (created a BW type info-object called ZCOLOUR which I put in the DP Planning object)
But when sending to PPDS, the COLOUR = RED comes over as a "desciptive characteristic", which is different to the manually created forecast in PPDS which is colour = RED within CLASS ZZZBLOCK Characteristic ZCOLOUR (Value = red), which comes up as a seperate tab on the requirement.
So the two ZCOLOURS of the infoobject ZCOLOUR and the Characteristic within Class 400 ZCOLOUR do not talk to each other ,and PPDS does not recognize the object, so cannot create any PPDS orders with block relevant characteristics.
The SAP help just talks about "create an ECC sales order" to use to feed demand into the CDP Blocks, so possibly it is not possible to map Demand Plan data to PPDS CDP Blocks. Has anyone got this to work?

Please check the following:
Use consumption group with CBF characteristics. The CBF characteristics need to be in the consumption group!
The consumption group has to be assigned to the u2018demandu2019-view of the
product master
The assignment of the consumption group to the release settings (transaction
/SAPAPO/MC90)
If you want to Make-to-Stock Segment implement the BADI:
From a configuration point of view it is required to activate the BAdI
/SAPAPO/DM_BADI_CONF and add following line of coding to the method
CONFR_FILL:
method /sapapo/if_ex_dm_badi_conf~confr_fill.
et_stra_details-plnvp = 9.
endmethod.

TMS Error ....Urgent

Hi All,
We are getting error in STMS.......production system is showing RED.
Log details-:
Command TMS_MGR_READ_TRANSPORT_QUEUE could not be executed
An error occurred in the TMS transport service.
System:         PRD.DOMAIN_DEV
Function:       TMS_TP_SHOW_BUFFER
Error:          TP_REPORTED_ERROR
while opening system tplog
Log file '/usr/sap/trans/log' could not be opened
The file could not be opened for reading. This can have various causes:
o The file does not exist.
   The transport control program tp only creates the log files when they
   are needed. If you have not yet made any exports or imports then no
   log files will have been created.
                                                                                Note
    Note that the log files ALOG and SLOG are recreated weekly. (For
    details on this, see the Online Help for the transport control
    program tp).
o The file is read-protected.
o You cannot access the directory.
Transport control program tp ends with error code 0212
                                                                                Message no. XT200
                                                                                Diagnosis
                                                                                An error occurred when executing a tp command.
                                                                                Command:        SHOWPARAMS PRD pf=/usr/sap/trans/bin/TPPARAM
      Return code:    0212
      Error text:     could not access file as supposed
                                                                                System response
                                                                                Processing was terminated.
Thanks & Regards,
Prashant.

Hello Pranshant,
Are you using a common transport directory for the transport domain.If this is the case as you have givne the symbolic link to the other transport directory is not required and then if you remove the link and activate the configuration it will start working.
Other wise you may give the production system's <sidadm> access to the transport directoy and check.i am not sure about this option.
Also i did not understand the requriement of that link to the transport directory of production as all the changes are happening in DEV and you are transporting down the landscape.If this a unix box then the trans directory should be NFS mounted on production system and not a link and if its a windows box then there should be a network share.
Thanks and Regards,
-Bijesh.

Yes the license is included fro intermedia in 8.1.7

Hi,
The license is included for oracle 8.1.7.
reagrds,
khaleel

Inso filter as part of the interMedia Text product is supported on Red Hat Linux only. It was added to the Red Hat Linux platform
beginning interMedia Text release 8.1.7.0.0. It will also be supported in interMedia Text release 8.1.7.1.0 on Red Hat.

ERROR: cannot find libjava.so

Hi All,
Iam getting this below error while running 9i -runinstaller in linux os -64 bit. please help in this issue to solve.
[oracle@dhcp-ptp2-10-177-155-47 Disk1]$ ./runInstaller
[oracle@dhcp-ptp2-10-177-155-47 Disk1]$ Initializing Java Virtual Machine from /tmp/OraInstall2012-08-30_12-37-56PM/jre/bin/java. Please wait...
Error: can't find libjava.so.
[oracle@dhcp-ptp2-10-177-155-47 Disk1]$ which java
/usr/bin/java
[oracle@dhcp-ptp2-10-177-155-47 Disk1]$ cd
[oracle@dhcp-ptp2-10-177-155-47 ~]$ cat red.env
export ORACLE_BASE=/u01/ora9i/oracle/
export ORACLE_HOME=$ORACLE_BASE/product/db_1
export SID=red
export PATH=$ORACLE_HOME/bin:$PATH
export LD_LIBRARY_PATH=$ORACLE_HOME/lib:/usr/bin/java/:$LD_LIBRARY_PATH
export TMP=/tmp
export JAVA=/usr/bin/java
[oracle@dhcp-ptp2-10-177-155-47 ~]$
}

Pl post exact versions of "9i" and "Linux". Is the specific database version you are installing certified on the specific Linux version you are installing on ? Is there a reason you are installing a desupported database version ?
Pl see if these MOS Docs can help
Oracle Universal Installer (OUI) Reports "Error: Can't find libjava.so" When Installing Oracle 9.2.0.4 on Red Hat 4.0 x86-64 (AMD64/EM64T) [ID 416530.1]
Requirements for Installing Oracle 9iR2 64-bit on RedHat 3 on x86_64 (AMD/EM64T) [ID 308588.1]
HTH
Srini

Switching to premiere pro

Hi,
This is panna from Hyderabad(india),i am a film director,i am completing my production work,working with red epic,now looking to edit my film in premeire,i looked out many post-production studios but all of the studios are working with fcp n avid,i dissapointed very much and i am not understanding why the people are not working with premiere,Finally i decided to build a pc n start working with my own setup- can i get help and support to my whole project from adobe?, because it challanges me a lot to edit my entire film in premiere pro,aftereffects etc....,this is the prestigious project to me and my whole team,i am the only one who working with adobe premiere here,now this is the begining and i am confident about my project and adobe tools that's why i decided to go with adobe.i am sure about that if u concentrate here adobe also get good market here with my project because this film is releasing in 3500 theatres in india
i want to write a letter to adobe ceo,how to contact them,plz give me the mail id of adobe ceo,thanks

Adobe contact information - http://helpx.adobe.com/contact.html

Premiere pro cc2014 problem with workspace

Hi everyone !
I have some issue with Premiere, and its workspace....
Each time (except some "random" times) a new project is open, there is a problem with the composition of the workspace. Each windows move in an odd way that i dont understand... And i must have to recompose each time my own workspace. This problem is recurent, even when I re open a project...
Here the result when a project is open :
Thanks in advance !

I 've been in relation with an "support technician" (i dont know how to define this fonction in english...), really useless... But few hours later I found this in my mail box. A potential answer (i didnt test it) to this problem (Sorry but the mail is in english and french.... Verry 'confortable' comme on dit chez nous...
Fasten your seabelt, it's a little bit complicated :
Merci d'avoir contacté le service clientèle Adobe suite à votre demande concernant première.
Pourriez-vous suivre ces solutions concernant votre problème:
1. Please rename the Adobe Folder in the Documents folder.
2. Make sure the user is not using the sync settings option. (https://helpx.adobe.com/premiere-pro/using/sync-settings-cc.html)
3.　Please uncheck the option for import work space from the project, under the window icon of Premiere Pro.
4. Try and change the user account. (https://helpx.adobe.com/x-productkb/global/create-local-administrator-account-windows.html)
5. Please make sure Premiere Pro is not installed on the network. (check if all was installed on default locations)
6. In case these steps do not work please perform a clean uninstall and re-install of the Adobe Application.
>>>> Suivez ces manipulation pour une réinstalle pour　WINDOWS:
A) Redémarrez la machine en Mode Minimal :
Windows Vista / 7 / 8 :
- Allez à l'adresse http://support.microsoft.com/kb/929135/fr
- Cliquez sur "Sommaire" puis sur "Procédure pour démarrer en mode minimal"
B) Désinstallez les produits depuis l'utilitaire Adobe :
http://helpx.adobe.com/fr/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
- Sur la page,　allez à l'étape 3 et sélectionnez votre plate-forme.
- Téléchargez l'archive et décompressez-la (clic-droit > Extraire)
- Dans le　dossier décompressé, exécutez "AdobeCreativecloudCleanerTool.exe"
- L'option à sélectionner pour supprimer le Creative Cloud est　3
- Sélectionnez "Clean All".
C) Supprimez les dossiers concernant Adobe suivants :
C:\Programmes\Adobe
C:\Program Files\Adobe
C:\Program Files (X86)\Adobe
C:\Programmes\Common Files\Adobe
C:\Program Files\Common Files\Adobe
C:\Program Files (X86)\Common Files\Adobe
C:\Programmes\Fichiers Communs\Adobe
C:\Program Files\Fichiers Communs\Adobe
C:\Program Files (X86)\Fichiers Communs\Adobe
NB : Les dossiers suivants sont normalement cachés par le système.
Pour y accéder,
http://is.gd/windows_hidden
C:\ProgramData\Adobe\
C:\Utilisateurs\<votre nom>\AppData\Roaming\Adobe
C:\Utilisateurs\<votre nom>\AppData\Local\Adobe
D) Videz la corbeille.
E) Téléchargez et installez le Gestionnaire d'abonnement depuis l'adresse suivante :
https://creative.adobe.com/products/creative-cloud
F) Redémarrez la machine en Mode Normal :
- Pressez simultanément le touche Windows et la touche R
- Tapez "msconfig" (sans guillemets) puis appuyez sur Entrée.
- Cochez "Démarrage normal" et cliquez sur OK.
7.
SAVE MSINFO32:
See for steps:
http://support.microsoft.com/kb/300887
1. Please press Windows Key + R to open the Run Menu
2. Type msinfo32 and click OK
3. While viewing the System Summary node go to File then Save (Please do not use Export)
　 Pour nous envoyer le fichier, allez sur www.adobe.com/go/supportportal_fr > identifiez-vous et cliquez sur le numéro de cas.
Si jamais vous rencontrez le moindre souci, n'hésitez pas à nous recontacter et c'est avec plaisir qu'un de mes collègues ou moi-même tenterons de résoudre votre problème dans les plus brefs délais.
En vous souhaitant une excellente journée,
Cordialement,
Raphael L
Adobe Service Clientèle.
Nous avons récemment mis-à-jour la page de support de notre site internet vers www.adobe.com/fr/support . Vous pourrez y trouver de nombreux éléments d'aide ainsi que, sous le menu « Nous contacter », le tout nouveau service de support par Chat. Vous pourrez accéder à celui-ci après avoir sélectionné votre produit et le sujet de votre question.
Nous vous adressons ce message en réponse au cas de support n° 0186330963 ouvert par pierre grambert.
Nous nous permettons de vous recontacter car nous n’avons reçu aucune nouvelle de votre part concernant ce cas. Si votre problème n’a pas été résolu, merci de bien vouloir nous en informer afin que nous puissions vous fournir une assistance complémentaire.
Pour ce faire, vous pouvez vous connecter au Portail du support technique Adobe et consulter l’historique des cas ou fournir des informations sur le cas en cours. Recherchez le numéro du cas dans la section des activités récentes. Pour ajouter des informations, ouvrez le cas et mettez-le à jour.
Si vous ne parvenez pas à vous connecter, consultez le forum aux questions sur les identifiants et les adhésions Adobe
Si nous ne recevons aucune nouvelle de votre part sous 7 jours à compter de la réception de cet avis, nous considérerons que votre problème est résolu et clôturerons le cas.
Vous disposerez toutefois d’un délai de 14 jours pour le rouvrir si vous rencontrez d’autres difficultés.
Merci,
Le service clientèle Adobe

EPMA/Planning custom dimension member attributes question

I have a custom dimension associated to an attribute dimension that I am setting via dataloader. Can I query on members with missing values of an attribute?
For example,
Dimension: Product
Attribute: Color Members: Red, Green, Blue, Yellow
Should it also include a Color member “Other” and require that every Product member have the Attribute Color set to one of the members?
Thanks for your help -

Hi,
If you are requiring to do analysis on other areas then it is probably best practice to create another attribute which will store this information, as you mentioned you could just create a member called "Other"
Cheers
John

PI Production IE is in red

Similar Messages

Maybe you are looking for