PI - Proxy processing An exception with the type CX_SY_CONVERSION_NO_NUMBER

Hi All,
We have PI sync scenario,SOAP to Proxy.
We are geeting the below error in Proxy .
Error during proxy processing An exception with the type CX_SY_CONVERSION_NO_NUMBER occurred, but was neither handled locally, nor declared in a RAISING clause The argument ' 1,000.000' cannot be interpreted as a number.
But when the same data got updated in Proxy.Not sure about the root cause of the error.
Regards,
Arun

Hi ,
It looks like proxy is not able to convert string to number or the format of number is incorrect. This is only possible reason of this exception.
The argument ' 1,000.000' cannot be interpreted as a number.
Check out if the format is correct.. .
Regards
Aashish Sinha

Similar Messages

  • Error during proxy processing An exception with the type CX_BBPX1_STD_MESSA

    Hello,everyone!
    My PI version is 7.11,SRM SUS version is 7.0,ECC version is 6.0 ,When I import XI SRM CONTEN,sending IDOC in ECC,there is a error some of the mesages:
    <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
    <SAP:Category>XIProxy</SAP:Category>
    <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
    <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
    <SAP:P2>CL_BBPX1_SUSPO_IN</SAP:P2>
    <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
    <SAP:P4 />
    <SAP:AdditionalText />
    <SAP:ApplicationFaultMessage namespace="" />
    <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
    <SAP:Retry>M</SAP:Retry>
    </SAP:Error>
    Detialed error from SXMB_MONI,
    Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner 0015111411 with type 'Vendor' I:R5:553 -'Different country' field contents deleted because identical to 'Country' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076527 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line:
    This issue only ocuured for partner 0015111411, but we tried with other partner ID and those messages are processed sucessfully and PO is created.
    I have a doubt that, is there functionality in proxy to compare the country with partner in SRM system. Could please anyone help me one the same.
    Regards,
    Baskaran K

    HI,
    This is a standard proxy. I'm not sure how to debug the proxy with payload. Could you please tell me the steps.
    We have one more error message
    <FAULT_TEXT>Error in XI interface: Exception occurredE:BBP_PD:147 -Enter a country for partner XY91 with type 'Sold-to Party' E:BS:002 -"Create" is not allowed (SUS Purchase Order 7100076526 ) Program: CX_BBP_BD_ERROR===============CP; include: CX_BBP_BD_ERROR===============CM002; Line: 57</FAULT_TEXT>
    Is there any table to check these details like Sold-to Part, Vendor etc in SRM system?
    Regards,
    Baskaran K

  • Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB

    Hi All,
    I am facing the following problem in production server when even the file got processed successfully .
    Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists
    Can you please suggest how it can be handled?
    Regards,
    Saras

    You need to debug your proxy program and check all the insert statemrnts. Looks like there is an exception being thrown in the proxy (may be after the completion logic to push the data in to db) which is not being caught.
    Proxies are object oriented and it is a good practice to implement Exception Handling mechanism.
    VJ

  • DYNAMIC_CALL_FAILURE Error during proxy processing An exception with the ty

    Hi,
    SRM 7.0 contains 2 clients:
    Sender: 100 for EBP, logical system is CLNT100
    Receiver: 200 for SUS, logical system is CLNT200
    both the clients are connected through PI 7.0, logical system of PI is CLNT001.
    From SPROXY of 100EBP, i'm executing the outbound proxy, in moni sent msg success.
    In PI also msg is processed.
    But in SUS200, it is showing below error msg:
      <?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
    - <!--  Call Inbound Proxy
      -->
    - <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
      <SAP:Category>XIProxy</SAP:Category>
      <SAP:Code area="ABAP">DYNAMIC_CALL_FAILURE</SAP:Code>
      <SAP:P1>UNCAUGHT_EXCEPTION</SAP:P1>
      <SAP:P2>CL_BBPX_TRADING_PARTNER_SUS_IN</SAP:P2>
      <SAP:P3>EXECUTE_ASYNCHRONOUS</SAP:P3>
      <SAP:P4 />
      <SAP:AdditionalText />
      <SAP:ApplicationFaultMessage namespace="" />
      <SAP:Stack>Error during proxy processing An exception with the type CX_BBPX1_STD_MESSAGE_FAULT occurred, but was neither handled locally, nor declared in a RAISING clause Application Error</SAP:Stack>
      <SAP:Retry>M</SAP:Retry>
      </SAP:Error>
    Pls help in resolving the same....
    tnx n rgds,
    balu

    Hi,
    How did you solve the issue? Can you please provide the solution.
    Thanks,
    -Devi Swain

  • Exception with the type CX_SY_OPEN_SQL_DB occured and was not handled

    Hi Champs,
    I am working on an interface which picks up file uploaded in a XI server and process it. The Function module used is a Z function module, developed locally.
    I am uploading an tab limited file in XI server and a background job processes the file. The tab limited file contains Payelement Transaction ID as primary key.  And after validation of elements like WBS element, cost center etc the file is posted using BAPI BAPI_ACC_DOCUMENT_POST. And all the Payelement Trans Ids are also replicated in a Z table, with there status viz. Success or Error or Warning.
    After background job was completed, we found in Tcode SXMB_MONI that the file was in error.
    The error message was :
    Error during proxy processing An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause The system tried to insert a data record, even though a data record with the same primary key already exists.
    But to my dismay, I found that some of the Payelement Trans Ids were posted for a document and are also replicated in my Z table.
    From the error it seems that we are inserting a record that is already there in the document. I have checked in for BAPI's input parameter, there is nothing duplicate.
    Note: Insertion in Z table is made after the BAPI BAPI_ACC_DOCUMENT_POST.
    Can you help me out in this issue as it is now getting into veins
    Reagrds,
    Nishant

    Hi,
    Even we have faced this kind of issue. In order to solve this just write the following code:
    1) Before inserting records in to Z table, write one select query on that table with primary key fields in where clause. Pass the value that are returned by BAPI BAPI_ACC_DOCUMENT_POST to the key field.
    2) If sy-subrc = 4, insert records in Z table else Continue and dont insert records in this table. 
    This will solve your problem.
    Regards,
    Prashant

  • An exception with the type CX_SY_CONVERSION_CODEPAGE occurred

    Hi Friends,
    i gonna mad by applying all notes related to this error but still i am not getting the abap report as bsp application, the notes i applied manualy are listed below
    834521
    849287
    851753
    853589
    Runtime Error:
    +Business Server Page (BSP) error
    What happened?
    Calling the BSP page was terminated due to an error.
    SAP Note
    The following error text was processed in the system:
    An exception with the type CX_SY_CONVERSION_CODEPAGE occurred, but was neither handled locally, nor declared in a RAISING clause
    Exception Class CX_SY_CONVERSION_CODEPAGE
    Error Name CONVT_CODEPAGE
    Program SAPLSURL
    Include LSURLF01
    Line 309
    Long text Bei der Zeichensatzkonvertierung wurde entweder ein Zeichen entdeckt, welches in einer der Codepages nicht dargestellt werden kann, oder festgestellt, daß diese Konvertierung nicht unterstützt wird.
    Error type: Exception
    Your SAP Business Server Pages Team+
    i am using
    Component version SRM 4.0 ( SRM Server 5.0 )
    SAP_BASIS 640 ( highest support - SAPKB64011 )
    SAP_ABA 640 ( highest support - SAPKA64011 )
    Unicode system - Yes
    Bsp code used
    On Create
    this handler is called once the page is first created (stateful mode)
    it performs a once-off data initialization or object creation
      data: listobject type table of abaplist. " occurs 10.
      data: report_name type syrepid.
      data: output_str type string.
    submit ZTEST_YOGESH
    using selection-set 'TEST' and return
    exporting list to memory .
    call function 'LIST_FROM_MEMORY'
    tables
    listobject = listobject
    exceptions
    not_found = 1
    others = 2.
    try.
    call function 'WWW_HTML_FROM_LISTOBJECT'
    exporting
    template_name = 'WEBREPORTING_REPORT'
    tables
    html = html
    listobject = listobject.
    CATCH cx_sy_conversion_codepage.
    ENDTRY.
    +
    Layout+
    <%@page language="abap"%>
    <%   data: html_wa type w3html.
    clear:  html_wa . %>
    <% loop at html into html_wa. %>
    <%= html_wa %>
    <% endloop. %>
    could any one give me any light on this, your help would be greatly apreciated.
    Thanks
    Message was edited by: Murugadass Krishnan

    Hi,
    Pls don't forget to reward points and close the question if you find the answers useful.
    Eddy

  • Error an exception with the type CX_SY_CONVERSYION_NO NUMBER Occurred

    Hi all
    I am trying to execute a demand report,which is of normal complexity,means some selections,new formulas, 2 variables,around 10 characteristics/Key figures.
    But this query thrwoing this error.and just disconnects from Bw server. with all users(means who ever access).The error is smae for all users.
    Error the argumnet 10,00,000 cant be interpreted  as a number
    Error an exception with the type CX_SY_CONVERSYION_NO NUMBER Occurred
    And starngely this query works fine in Dev/Qa.No error at all.
    So i did the transport again 2 times from Qa -->Prod,but still the error remains the same in Prod.and just kicks out of system
    Any possible advice here appreciated.Many Thanks.
    Regds,
    Preethi.

    I had a request who works fine since one year and these last two days i have a CX_SY_EXPORT_NO_SHARED_MEMORY.
    I tried many things like rebuild indexes, reload stats oracle .. but these actions didn't solve my problem.
    I didn't want to modify parameter via RZ11 because this request was working fine before and the system is stable (no more user or more activity than the past)
    I solved the situation by a deletion of Olap cache.
    So:
    Try to delete the OLAP cache by the RSRCACHE and reload again yu request (but be care because yu will erased the cache for all Bex request..)
    Edited by: Frédéric PIERRON on Nov 3, 2010 5:59 PM

  • An exception with the type CX_SY_DYNAMIC_OSQL_SEMANTICS occurred

    Hi,
    I  have successfully loaded data in PSA and while creating DTP, activated  extraction
    and tried to execute it and found following error
    An exception with the type CX_SY_DYNAMIC_OSQL_SEMANTICS occurred, but was neither handled locally, nor declared in a RAISING
    I have checked the support package level which is 15 for  BI 7.0  .  I am quite sure that that it is
    not problem due to support package.
    Please suggest me how to correct this error...
    Regards,
    Vivek

    Hi,
    While checking DTP I have found following message
    The selection criteria for the DTP to be activated overlap with the selection criteria of DTP DTP_D5XAEHUGDAMPMWNH63Y1SZX6C in field , for example, with regard to value . Delta transfer from a source object to a target object is only allowed to transfer each record oncce. However, this cannot be guaranteed if two DTPs have overlapping selection criteria with the 'Delta' extraction mode.
    System Response
    You cannot activate the DTP with the current selection criteria.
    Procedure
    Restrict the selection criteria so that they do not overlap with the selection criteria for DTP DTP_D5XAEHUGDAMPMWNH63Y1SZX6C.
    Please suggest

  • Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, bu

    Hi BW Guru's,
    I am getting the following error while executing BW report in BEx Analyzer:
    Error An exception with the type CX_SY_EXPORT_NO_SHARED_MEMORY occurred, but wa
    Error No space left in SHARED MEMORY
    Please help me to resolve the issue.

    I had a request who works fine since one year and these last two days i have a CX_SY_EXPORT_NO_SHARED_MEMORY.
    I tried many things like rebuild indexes, reload stats oracle .. but these actions didn't solve my problem.
    I didn't want to modify parameter via RZ11 because this request was working fine before and the system is stable (no more user or more activity than the past)
    I solved the situation by a deletion of Olap cache.
    So:
    Try to delete the OLAP cache by the RSRCACHE and reload again yu request (but be care because yu will erased the cache for all Bex request..)
    Edited by: Frédéric PIERRON on Nov 3, 2010 5:59 PM

  • I am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on an

    am having issues deactivating my version of CS4. I receive an error message stating unable to connect or that my firewall or proxy settings are interfering with the process. I do not want to uninstall until i can deactivate as i wish to use a copy on another laptop

    Hi K8tym,
    Please refer to below article.
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    Thanks

  • Finding exception with the read-write-backing-map-scheme configuration.

    Finding exception with the <read-write-backing-map-scheme> configuration, that is setup against a simple database cache store implementation. The class SimpleCacheEventStoreImpl implements CacheStore interface.
    Exception in thread "main" java.lang.UnsupportedOperationException: configureCache: read-write-backing-map-scheme
         at com.tangosol.net.DefaultConfigurableCacheFactory.configureCache(DefaultConfigurableCacheFactory.java:995)
         at com.tangosol.net.DefaultConfigurableCacheFactory.ensureCache(DefaultConfigurableCacheFactory.java:277)
         at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:689)
         at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:667)
         at Sample.SimpleEventStoreConsumer.main(SimpleEventStoreConsumer.java:10)
    The cache store is interfaced to the program SimpleEventStoreConsumer(where I have a put and get operation) through the following cache configuration descriptor. On running the SimpleEventStoreConsumer, the exception happens on trying to get the Named cache from the cache factory
    <cache-config>
         <caching-scheme-mapping>
              <cache-mapping>
                   <cache-name>Evt*</cache-name>
                   <scheme-name>SampleDatabaseScheme</scheme-name>
              </cache-mapping>
         </caching-scheme-mapping>
         <caching-schemes>
              <read-write-backing-map-scheme>
                   <scheme-name>SampleDatabaseScheme</scheme-name>
                   <internal-cache-scheme>
                        <local-scheme>
                             <scheme-ref>SampleMemoryScheme</scheme-ref>
                        </local-scheme>
                   </internal-cache-scheme>
                   <cachestore-scheme>
                        <class-scheme>
                             <class-name>com.emc.srm.cachestore.SimpleCacheEventStoreImpl</class-name>
                             <init-params>
                                  <init-param>
                                       <param-type>java.lang.String</param-type>
                                       <param-value>{cache-name}</param-value>
                                  </init-param>
                             </init-params>
                        </class-scheme>
                   </cachestore-scheme>
              </read-write-backing-map-scheme>
              <local-scheme>
                   <scheme-name>SampleMemoryScheme</scheme-name>
              </local-scheme>
         </caching-schemes>
    </cache-config>

    you are missing <backing-map-scheme>. Do like following:
    <caching-schemes>
              <distributed-scheme>
                   <scheme-name>distributed-scheme</scheme-name>
                   <service-name>DistributedQueryCache</service-name>
                   <backing-map-scheme>
                        <read-write-backing-map-scheme>
                             <scheme-ref>rw-bm</scheme-ref>
                        </read-write-backing-map-scheme>
                   </backing-map-scheme>
    <autostart>true</autostart>
              </distributed-scheme>
              <read-write-backing-map-scheme>
                   <scheme-name>rw-bm</scheme-name>
    <internal-cache-scheme>
         <local-scheme>
                        </local-scheme>
                   </internal-cache-scheme>               
              </read-write-backing-map-scheme>
    </caching-schemes>

  • Cannot download an app from the app store on ipad2, the installing processes all pause with the "waiting....." sign under the app logo.  Anyone please help how to solve this.

    I cannot download any app from the AppStore on my ipad2 v5.1
    The installing processes always stop with the sign "waiting......." and didn't show any progress at all
    Anyone ,please help me solve the problem, thanks

    The ipad question was someone else's.  I have no problem with any other device (laptop, Nook, PS3, Android daughter's phone) at home or work.  Just my iphone.  I tried posting my question a few times and it has yet to show up.  At least this made it online!  I was almost ready to purchase an Ipad3, but this is starting to make a Galaxy Tab look pretty good!
    This problem seems way too common to be a fluke!  My search results yielded- http://search.yahoo.com/search;_ylt=A0oG7hsbdq1PzQMA1N5XNyoA?p=IOS%205%20apps%20 waiting&fr2=sb-top&fr=chr-hp-psg&type=HPNTDF&type_param=HPNTDF
    I performed a sync last night too!

  • Help!!! (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer)

    Post Author: mrmc
    CA Forum: General
    Hi all,
    Recently, I got problem on using cystal report on asp.net web. the error msg is:
    Parser Error Message: The base class includes the field 'viewer', but its type (CrystalDecisions.Web.CrystalReportViewer) is not compatible with the type of control (CrystalDecisions.Web.CrystalReportViewer).
    in the code:
    <%@ Register TagPrefix="ce" Namespace="CrystalDecisions.Enterprise.WebControls" Assembly="CrystalDecisions.Enterprise.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304" %>
    <CR:CrystalReportViewer id="viewer" runat="server" AutoDataBind="true" HasCrystalLogo="False" Width="350px"          Height="50px" HasToggleGroupTreeButton="False" DisplayGroupTree="False" HasGotoPageButton="False" HasRefreshButton="True"          DisplayToolbar="False"></CR:CrystalReportViewer>
    In web.config
    <add assembly="CrystalDecisions.Web, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=1234567890"/>
    the server contains crytal report 9 (come from .net studio) and crytal report 11 (installed standalone). 
    I googled this problem, it seems a lot of people got this problem but no solution...
    could anyone help me?  Thanks!

    Post Author: david.wilkes
    CA Forum: General
    You might try Removing the Reference and re-adding the reference. That seemed to get me pass this error, but I ran into another error that I have not figured out yet.

  • "there was a problem connecting to the server. URLS with the type 'file' are not supported"

    i have a new macbook pro 13" and every 6 minutes or so it pops up a window that says "there was a problem connecting to the server. URLS with the type 'file' are not supported". it never seems to cause any problems but is supremely annoying. how can i make this come to an end?

    I tried someone's solution of taking another external disc and plugging it in, then when it showed up and time machine asked if I wanted to use it or that someone might be trying to trick me, I chose not use it.  Then I  shut down my computer, plugged in the original Lacie, and rebooted the computer and all seems to work fine now-- the Lacie appears on my desktop and all seeems to be in working order. Who knows why or anything else,- as weird as it gets- but for now things seemed fixed--- maybe others can try this too-- it worked for me so far.

  • "There was a problem connecting to the server.   URLs with the type "file:" are not supported.  Why?  What can be done to eliminate it?

    After upgrading to Mountain Lion, I repeatedly get this message:  "There was a problem connecting to the server.   URLs with the type "file:" are not supported. 
    Why? 
    What can be done to eliminate it?

    Open the Time Machine pane in System Preferences. If it shows that Time Machine is ON, click the padlock icon in the lower left corner, if necessary, to unlock it. Scroll to the bottom of the list of backup drives and click Add or Remove Backup Disk. Remove all the disks, then add them back. Quit System Preferences. Test.

Maybe you are looking for