PI sheet and backflush

Hi,
Are backflushed components to be shown in a PI sheet ? Or can the PI sheet be used as a tool to replace a process order pick list which is used to pick non backflushed components ?
Thanks
GS

Hi,
We can control this by creating a varinat for the program RCOCRPVG in SE38 by selecting the option for backflushing components and assign this variant in control recipe definition in O10C as a filter. Assign a process instruction category and generation scope as 01.

Similar Messages

Profit Center wise balance sheet and Profit and Loss account

Hi Experts,
I will explain my scenario
The is cleint having Head Office for handling procurement of goods for all branches(8) and the physical delivery happens for goods at the requested branch and GR and IR also makin at the branch level.
And we are treated each branch as profit center apart from HO(profit center).But the vendor payment should be happen from HO(prfoit center) so and they are not using automatic payment programme.
My question is
1.While doing the vendor (Branch)payment from Cash/Bank GL (HO) how the balances will be tallied ?
2.If I am using the document splitting and zero balance document clearing will it tally at the profit center level ?
3.At the period end if I will do the 1KEK T Code to transfer the payables to the profit center which profit center system will take for posting ?
Please advice me in this and I will give good points with correct answer.

Hi Edukondalu Garu,
Please find answers to your questions below:
1.While doing the vendor (Branch)payment from Cash/Bank GL (HO) how the balances will be tallied ?
Answer: The Profit Center balances will get automatically tallied due to document splitting and Zero balance account being defined properly. The automatically identifies it
2.If I am using the document splitting and zero balance document clearing will it tally at the profit center level ?
Answer: Yes that is the main criteria to get full fledged Balance sheet and P&L account by Profit Center
3.At the period end if I will do the 1KEK T Code to transfer the payables to the profit center which profit center system will take for posting ?
Anwer: With Document Splitting, you don't have to do the period end transaction in PC to transfer the account payables, accouts receivables and fixed assets. The transfer is online and real time basis.
I hope i answered all your questions.
Please feel free to get in touch with me if you need futher clarifications
Best Regards
Surya

What are the data sources for 0FIGL_V10 cube Balance Sheet and Profit& Loss

What are the data sources for 0FIGL_V10 (G/L (New): Balance Sheet and Profit and Loss) cube. and whether we can install business content regarding this.
Please help me out.
thanks,
sapsdnhelp

Hi,
Check this:-------
Urgent: Relevant Master Data Data Sources for FI-GL & FI-AP
http://help.sap.com/saphelp_nw04/helpdata/en/04/47a46e4e81ab4281bfb3bbd14825ca/frameset.htm
Regards,
Suman
Edited by: Suman Chakravarthy on Sep 28, 2011 7:33 AM

Installed office for mac (trial version). now I got 2 excel files, which cannot be deleted. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion(with win 7 parallel)

now I got 2 excel files, which cannot be deleted on my desktop. I can't open them, either. I googled the names of the sheets and found chinese websites I never visited. Are those dialers? How can I get rid of them? system is mac lion (with win 7 parallel)

The people who make that stuff have their own forums you can also search/ask in:
http://answers.microsoft.com/en-us/mac/forum

Create a visual web part which get data from excel sheet and import it into sql server database in sharepoint 2010 (development)

Hi,
I want to create a visual webpart which will read data from excel sheet and import it in to sql server database.(using sharepoint development)
I want to do it using visual webpart.
Please help to solve the issue.
Thanks in advance!
Regards
Rajni

Hi Rajni,
Microsoft.Office.Interop.Excel assembly provides class to read excel file data, in your web part solution, reference the assembly, and following blog contains samples about how to read the excel file data,
and import it to SQL database.
1.Create a Visual Web Part Project:Create
Visual Web Parts in SharePoint 2010
2.Read the excel workbook by using SPFile class:
http://alancejacob.blogspot.in/2012/06/read-data-from-excel-file-and-insert-in.html
http://stackoverflow.com/questions/14496608/read-excel-file-stored-in-sharepoint-document-library
3.Export the excel workbook to SQL Server:
http://www.c-sharpcorner.com/UploadFile/99bb20/import-excel-data-to-sql-server-in-Asp-Net/
Best Regards,
Eric
Eric Tao
TechNet Community Support

BEST Practice for Balance sheet and Investment Planning

hi all
I need the Best Practice guides for Balance sheet and Investment Planning
where can i get it ?
if someone has them please could you mail them to [email protected]
also if someone has documentation regarding these please forward them also
Points assured
Thanks in advance
Nidhi

Hi Nidhi,
Refer to the below link for the available scenarios
http://help.sap.com/bp_biv335/BI_EN/html/Bw.htm

Profit center group wise balance sheet and trading account report req

Hi.
We are using Profit ceter accounting for one of our clients.its ECC 6.0 therefore New GL is activated. FSV is not configured.
Now I want to get the reports - Profit center group wise balance sheet and trading a/c.
Can anyone help me in this regard.
Thanks in advance.
Regards,
Padmavathi

Hi Padma
the std reports S_PL0_***** serve the purpose... You can browse SAP easy access menu under FI
you can input PC or a group of PC as additional selection criteria
Ajay M

Configration steps for business area wise balance sheet and p&L accounts

dear all
sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
regards
babu

Hello
No seperate screen available for BA set up.
Follow the IMG, enterprsie structure, define and assign set ups.
Assign to SO / Plant /
Create cost elements and assign cost centers for each business areas.
Create clearing accounts for readjustments in BS and PL, and execute BA pl and bs adjustment programs for taxes, GRIR and some accounts, where BA is not populated.
Now you would get seperate BS for each BA
Reg
assign points if useful
dear all
sinario is two business areas say A and B for diffternt two products in one company code which is already running with different business .
please any one tell me what are the configrations for business area wise balance sheet and profit and loss account.
what are the steps required and for configration and when enduser come into picture acceptance test is reqired.
plese inform me which are the steps required to test enduser test for business area wise balance sheet and profit and loss account
regards
babu

Business Area wise Balance sheet and P&L display

Hello SAP Gurus
Can anybody tell me how to configure to view, balance sheet and Profit & Loss as per business area?
Regards,
Abhijit Walke

It is a misconception that Business Areas are not recommended by SAP.
Business Areas and Profit Centres serve two different purposes and Profit Centres are NOT a replacement for BAs nor vice-versa.
We have just implemented ECC 6.0 using Business Areas and there was no indication at any stage neither from SAP nor its consultants that BAs will not be supported. There is no SAP written document that these will not be supported and if there is, I would be interested to look at it.
As for config, you may want to follow this link for details:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/5f/1fb0274aee11d189740000e8322d00/frameset.htm
Cheers.

Discrepancy between Balance sheet and Aging report

HI Experts,
I have a client who run the AR Aging and Balance sheet monthly for as their month end procedures.
They have found the following:
When the Balance Sheet and Aging report is run on the same day this shows the same on the Accounts Receivable and the Aging report.
When the Aging is run a few days after the month end, and the Aging Date is selected as 05/01/2010, the Posting Date untill is also 05/01/2010, the Balance Sheet To date is 05/01/2010 I get discrepancies between the 2 amounts.
I looked for documents with later Posting/Document dates but could not find any in the aging report.
Any help would be welcome.
Marli

Hi Marli,
You may check these threads:
Re: Mismatch in Accounts Receivable Balance and A/R Aging Balance due
Re: customer aging query - show balance as of a specific date
Thanks,
Gordon

In the finder window, column view, I double click on icon, eg. a spread sheet, and document will not open since I updated to OSXv10.8.2. Help anyone?

In the finder window, column view, I double click on icon, eg. a spread sheet, and document will not open since I updated to OSXv10.8.2. Help anyone?

Hi Ron,
Highlight one in the Finder & do as Get Info on it, what does open With say to use?
What did you update 10.8.2 from exactly? 10.6.8 maybe?

How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item

Dear Experts:
could you please share with me the knowledge for below topic:
How the freight cost are transferred from condition type of shipment cost document to service entry sheet and collected in service PO item, because these three objects use three different pricing procedures, and different condition type.
how did the condition type of service entry sheet know to copy the value of whcih condition type in the pricing procedure of shipment cost document?
Is this SAP standard function OR there need an enhancement to do that?
I didn’t find related condition value copy setting in background, could you please share related setting with me? Thank you very much for your kind help!
Best regards,
Andy

Hi, Gopi,
Glad to see your feedback, but i still have question on your feedback:
which condition type in the pricing procedure of service entry sheet should know to capture the net value of shipment cost doc? becasue there are so many condition types,
And i have checked the corresponding condition type (PRSX) of service entry sheet pricing procedure in my SAP system, this is a self-defined condition type, but NO any calculation routine maintained for the condition type (PRSX), how did the condition type (PRSX) know to copy the total cost of shipment cost document?
Below is the example and another question:
what the relationship between the pricing procedures at service PO item level and service line item level?
1. The freight cost in shipment cost document—including used condition type and pricing procedure
The pricing procedure of shipment cost document
2. The freight cost in service entry sheet—including used condition type and pricing procedure
The pricing procedure of service entry sheet--the pricing procedure at service line item level
3. The freight cost in service PO item—including used condition type and pricing procedure:

How can I give a name to excel sheet and open another one?

Hello!
I use CSVWriter for writing in excel file.
I have 2 questions:
1. How can I give a name to a Sheet in excel file?
2. How can I save the first Sheet and open another one with a different name?
Thanks!

This is the equivalent in Apache POI which may or may not help. I've never used CSVWriter.
HSSFSheet sheet1 = workbook.createSheet("sheet1Name");
HSSFSheet sheet2 = workbook.createSheet("sheet2Name");Then you can use either sheet object to write your contents. Look at the documentation for CSVWriter that pertains to sheets as it should tell you how.

Listview for new sheets and tables in numbers 3.0

Hi there,
when adding a new sheet or table in numbers 3.0 you get them in a horizontal bar under the symbol-bar.
If you need severals sheets it directly get confusing.
In numbers 09 numbers used to add new sheets in a list view on the left side of the window. And the tables
subordered to each sheet. Is there a possibility to change this view in numbers 3.0 to the same view
as used in numbers 9.0?
If not I will directly change again to 9.0 and hope the apple starts beeing again the big company they
used to be a couple of years ago. They start sucking!

Hi Yellowbox,
I apreciate your answer.
I already switched back to 9.0! To have the sheets and their subtables on left site in listview matches my business scenario. For making calculations for severals companies working on the same project, it is more comfortable to have one sheet per company and for each related service an exra table. For me it wouldn't be clear anymore while using 3.0.
Thanks again for your effort.
My big question is, way want somebody forcing you to do something like they think it should be!?
The machines are very powerful. So please let us work / use the tools as we feel the best.
The strategy to force someboy to used in a special manner, used to be typically for Microsoft.
This is one good reason why a lot of people switched to Apple! THINK DIFFERENT!!!! and not
THINK LIKE US!!!
Please rethink companies politics.
What is the matter of having Icloud if I only can load special material, with only certain special software releases?
What is the matter of having Fotostream if i am forced to delete a picture from every of my devices wich costs a lot of time! Where ist the option, delete from this advice or completey from icloud?
What is the matter of having such expensive products like Ipads/Iphones/... if I need special apps which aren't at all comfortable to load unload single fotos / ...
What is the benefit of having time machine if it only works with special hardware? I have a perfectly running 12TB BackupSystem/NAS and can't us it!
Why should I spent so much many to have the best computer equipment if I can't use it like i need it?
And please from release to release the system is more and more bothering and interacting with the user... this is one of the reason why Microsoft products are so horrible. When I am sitting on my computer I want WORK and not getting one alert, warning, interaction behind the other. I want work! I want to be effective! So please, give up from this method of interacting with the user.
Why has Iphoto to be so aggressive? I dont want to put pictures in events. And neither and predifend events respecting the time stamp! I just want to have a file watcher which keeps up to date a tree (with the manipulating options of Iphoto) of a certain folder structure. NOTHING ELSE!
APPLE = GOOD PRODUCTS, BUT ALMOST NOT USABLE
Maybe I should switch again to SuSe Linux ;-)

Numbers Question, Finding Values In Multiple Sheets and Tables

I would like for a cell to be looking at all sheets, and calculate the Debt 1 or Debt 2 allocated funds. It would need to find the word, Debt 1 and take the number two cells to the right...I have attached a document to my webpage...
http://web.me.com/chris.ducasse/Forum/ForumBlog/Entries/2010/1/12009_Bi-Weekly_Budgets_ForForums.html

Hello
Working on the OP's document, I discovered a surprising odd behaviour.
In a table I grab datas from other tables using VLOOKUP.
The formula is :
=IFERROR(VLOOKUP(A$1,INDIRECT("Outgo "&ROW()&" :: A:C"),3,FALSE),0)
The cell in B1 grabs a value from table Outgo 1
The cell in B2 grabs a value from table Outgo 2
As the OP named its first table Outgo, when I named it Outgo 1,
I decided to edit the formula in cell B1. It becomes ::
=IFERROR(VLOOKUP(A$1,INDIRECT("Outgo :: A:C"),3,FALSE),0)
The funny behaviour is that in a sheet where there is no Outgo table (I had the "Outgo 1" one),
the formula continue to return the value grabbed from the table "Outgo 1".
For see, I renamed "Outgo 1" as "Outgo 3" with a different numerical value.
The formula referencing "Outgo" continue to return the value which was in "Outgo 1"
Continuing to play with this problem.
I edited the formula as:
=IFERROR(VLOOKUP(A$1,INDIRECT("Outgo 3 :: A:C"),3,FALSE),0)
Bingo, it grabbed the value from the true Outgo 3 table.
One more time I edited the formula as:
=IFERROR(VLOOKUP(A$1,INDIRECT("Outgo :: A:C"),3,FALSE),0)
Son of a …, it gives again the value which was in the now unavailable table "Outgo 1".
I guess that it grabs it from the undo buffer but it's absolutely foolish.
Serious smelling of bug but I wish to know if you get the same behaviour in other machines (maybe something is odd on mine).
Happily, there is a way to get rid of this odd behaviour :
cut the entire formula
press return
The cell is now empty.
Select it then paste.
The pasted formula will have a correct behaviour.
Yvan KOENIG (VALLAURIS, France) samedi 2 janvier 2010 16:37:16

PI sheet and backflush

Similar Messages

Maybe you are looking for