PI sheet does not show the table of materials to be consumed.

Hello,
Weu2019re trying to customize the pi-sheet on SAP 4.7 (SAP-APPL Release 470) and weu2019re having some problems.
On transaction O12C (Define Process Instruction Categories), weu2019ve created an Instruction Category for Material Consumption using Type of the process data request equal to Repeated process data request. Doing this, when we create a Process Order, the PI sheet does not show the table of materials to be consumed.
If we use Type of the process data request equal to Simple process data request instead of Repeated process data request, the PI Sheet works well (The table of materials to be consumed are showing).
Thanks in advance.

Hi,
Is the issue resolved...? If yes then how...
If not, then can you please elaborate more on the process instructions charateristics you have used. Just list first ten characteristic and there values.
Regards
Neeraj

Similar Messages

  • BOE 3.0 Designer does not show the table browser

    Hi,
    I am using BOE 3.0. I was able to view the table browser a few days back. After I changed the license key, the designer stopped showing me the table browser. I am logging into Designer with Administrator previleges. Although the Administrator has "Full control", but when I click on "Insert->Tables" in designer it does not do anything, not even display the table browser. I have created Oracle client connection and tested it. The server is responding, but the insert-> tables does not work.
    Any help would be appreciated.
    Thanks,
    SUS.

    1. When you invoke table browser using Insert->Tables do you see progress bar below the designer (task Bar)
    Sus: Yes I can see the progress bar. It exists for a few seconds and then disapperas,but does not do anything.
    2. Can you try invoking Table browser by double clicking on Universe designer pane.
    Sus: Yes I tried, but nothing happened. I mean I could not see the table browser
    3. Can you check if Designer can connect to your DB.
    Sus: Yes the designer is able to connect to the DB. I tested the connection and got the message "Server is responding". In fact when I am using the quick design wizard I can able to see the tables from my DB.
    4. How many tables do you have in DB, IF there are lot many table then it might table time to load those tables
    Sus: Currently my DB contains almost 40(20 tables and 20 views). I don't think it is concern. I worked with DB which contains more than this and that time I did not face this issue.
    5. Can you strategies tab in parameters (File->Parameters). What is the strategy for Tables. Try using built-in strategy.
    Sus: Yes it is built-in for tables. It is the default one and I did not change it.
    Is there a limit set to insert tables in designer?
    -Sus

  • Creating new ODBC connection does not show the tables

    Post Author: reemjacob
    CA Forum: Data Connectivity and SQL
    Hello
    I am creating a new ODBC Connection to SQL Server in Database Expert. Once I created the ODBC when I expand the Database I should be seeing the tables, views and stored procedures. But instead I am only seeing stored procedures. When I right click on the DB and go to options I see that Tables, Views and Stored Procedures are checked. How can I correct this so that I see the Tables and Views?
    Regards
    Reem

    Not an Oracle proble. Not an instant driver problem.
    If the ODBC tool and driver you use, fail to construct the proper SQL to interrogate the very rich Oracle data dictionary.. what is Oracle suppose to do? Fix the software from those vendors for the user? Not going to happen. Get Oracle Raptor instead and use a proper Oracle client.
    Simple test. Run the following SQLs via your ODBC connection.
    To see all your objects in your schema (i.e. the one you logged into via ODBC):
    SELECT * FROM user_objects
    To see a list of schemas:
    SELECT username FROM all_users ORDER BY 1
    To view other schemas' contents:
    SELECT * FROM all_objects
    Also note that historically ODBC has delivered poor performance. I recall many performance tests I've done during the 90's that showed ODBC up to 3x slower and generating more than 4x the network traffic, than native connections. Not too mention using ODBC introduces an additional software layer, which means more moving parts, more complexity, and more failures.
    I have not touched ODBC with the proverbial 10ft pole since - and today, I have even less need to use a clunky software layer like ODBC. And should I be forced to, it will be passthru all the way.

  • Why this query does not show the result?

    Why the query with the schema prefixed does not show the result and the query without schema display the correct results?
    SQL> select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS';
    select data_object_id,object_type from dba_objects where object_name='HR'.'JOBS'
    ERROR at line 1:
    ORA-00933: SQL command not properly ended
    SQL> select data_object_id,object_type from dba_objects where object_name='HR.JOBS';
    no rows selected
    SQL> select data_object_id, OWNER, object_type from dba_objects where object_name='JOBS';
    DATA_OBJECT_ID     OWNER                          OBJECT_TYPE
    69662              HR                                 TABLE
                       OE                                 SYNONYM
    SQL> SELECT USER FROM DUAL;
    USER
    SYS

    Hi,
    the column object_name refers to a object_name which is 'JOBS', the column owner refers to the owner 'HR', the value isn't stored together, so you have to select the two columns. It is the same behaviour as every other table/view. Have a look at the values in the view DBA_OBJECTS.
    Herald ten Dam
    Superconsult.nl

  • Report does not show the main section while calling from forms 6i

    Hi
    I am running report from report from forms 6i but is does not show the data in main section, where as the data in the header section is ok.
    But when i run the same report independantly from report builder it show the both header and main section with relevent data.
    pl solve the matter
    thanks in advance

    can you tell me more about this, you might check if you are using different users when you call this report or if the user has all privileges to see all tables in this report

  • ME23n , Does not shows the values correctly in print preview

    Hi,
    When viewing a PO using ME23n , it does not shows the values correctly in the print preview.
    For example;
    This is the vendor & its address.  (check attached image img1.jpg)
    ZERANDIB BUSINESS APPLIANCES
    Number-122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO-04
    When displaying the print preview, it shows only some parts of the above address
    Shows only; (check attached image img2.jpg)
    ZERANDIB BUSINESS APPLIANCES
    PO BOX 41,112,REID AVENUE
    These values are getting from a table called LFA1. I have checked that table & in that table all the values exists correctly.
    I have noted issue is with, having only a single word. (If address or name having only a single word, that is without spaces, it will not going to show in the print preview) -
    In the above example, it is not showing Number-122/A and  COLOMBO-04 (Its a single word. No spaces there)
    If its like --> Number - 122/A   &  COLOMBO - 04 ,  then it will display in the print preview correctly (where there are spaces after - mark)
    check img3.jpg
    If its having more than one word, then it will display correctly in the print preview.  As below;
    ZERANDIB BUSINESS APPLIANCES
    Number - 122/A
    PO BOX 41,112,REID AVENUE
    COLOMBO - 04
    If its 2 or more words, it shows correctly.
    If its 1 word, then its not showing!
    Why it is happening like that? Any ideas how to resolve this issue?
    regards.
    zerandib

    It turns out that this problem went away after the program crashed.  Everything seems to be working well now.

  • Database Adapter Wizard does not show accessible table

    HI guys,
    in the wizard I am unable to see the tables which I need to use for database adapter.
    But I do have access to those tables, and able to select from them in SQL worksheet from with in Jdev.
    I dont own the tables, but my user id have readable access to those tables.
    Any help is appreciated.
    P.S. If I didnt explain it properly, plz let me know. It really creates lot of access issues if I can only create DB adapter on My owned tables.
    :)

    Hi there,
    please see the answer to your duplicate post on the BPEL forum:
    DB Adapter does not show selectable tables
    In general BPEL forum gets a lot more traffic but I will try to address questions on both equally.
    Thanks
    Steve

  • Oam does not show the correct configuration information

    Oracle apps,
    An issue with the oam.
    There are 2 nodes in our system. In 12
    One is for db and cm
    The other is for forms and apache.
    The system is running fine.
    But from the OAM, where it does not show the correct configuration info.
    From the OAM, all the services are (including db, cm, forms, apache) on one node.
    The issue might be caused by the fact that the web tier was cloned from the cm tier as a workaround for some patch errors in web tier.
    I even used the EXEC FND_CONC_CLONE.SETUP_CLEAN; to clean the system tables and ran
    Autocfg on all tiers. But it didn’t solve this issue.
    How can I fix this OAM problem to make it show the correct information?
    Thanks,
    Lily

    Thanks for reply.
    Yes, I did commit it.
    The hostname information is correct.
    On oam, this web node is there but all the service actually running on this node is
    showing under the cm node .
    <TIER_DB oa_var="s_isDB">NO</TIER_DB>
    <TIER_ADMIN oa_var="s_isAdmin">YES</TIER_ADMIN>
    <TIER_WEB oa_var="s_isWeb">YES</TIER_WEB>
    <TIER_FORMS oa_var="s_isForms">YES</TIER_FORMS>
    <TIER_NODE oa_var="s_isConc">YES</TIER_NODE>
    <TIER_FORMSDEV oa_var="s_isFormsDev">YES</TIER_FORMSDEV>
    <TIER_NODEDEV oa_var="s_isConcDev">YES</TIER_NODEDEV>
    <TIER_WEBDEV oa_var="s_isWebDev">YES</TIER_WEBDEV>

  • Crystal Report does not show the webelement for SAP System

    Hi all,
    I have added web element in Crystal report for SAP system (BI or R/3) . But it does not show the control. It shows only scipt.It does not render the HTML.
    But if I add the webelement for Excel sheet ,It shows the control.
    How can I add web element for SAP System? Can't we use web controls in SAP system ?
    Help me in this regard.
    Regards
    Hemalatha J

    Hi,
    We have the same problem, did you find the final solution?
    Thanks in advance
    Regards.

  • InsertRow does not show the inserted row on the view

    hello:
    The code below works well and shows the row on the view when added. However, when there are several existing rows and I have to scroll to next pages. an insert button on that page does not show the new Row at all. Is there a way for me to see the row even if I scroll over to the last page and try an insert?
    ViewObject myVO = this.getMyView();
    Row newRow = myVO.createRow();
    newRow.setAttribute("Id", myId);
    myO.insertRow(newRow);
    Thanks

    Hi,
    I also have problems with code above for inserting a new row.
    When I insert a new row in a table and click on column header (to change sorting), that row (and any other new row before committing) disappears from table. And if I commit that table (without missing row), the missing row reappears with next refresh.
    Selection in that table (using SelectOne component with Autosubmit=true) also doesn't work with new rows (with existing rows it works fine). Selection allways sticks on first inserted row!
    Something weird is happening here...
    Please help.

  • Field Explorer in Crystal Reports does not show the same names as Bex Query

    Hi
    I have crystal reports, I can retrieve data from BW Bex Query. But in the field explorer it does not show the names as in the Bex query designer.
    In the Bex query designer a field will have the following technical name 0Debitor and the description is Customer.
    It shows in crystal reports in the field explorer twice as D[0DEBITOR]D and D[0DEBITOR]D. It also does not seperate key figures and characteristics.
    I would like it to display the field explorer as shown in this blog.
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    Thanks in advance

    Hi,
    take a look here:
    /people/ingo.hilgefort/blog/2008/02/19/businessobjects-and-sap-part-2
    make sure you are using the MDX Driver and what happens is that you will see several fields per characteristic. example: one for the key, one for the description, several if modelled for the display attributes
    Ingo

  • HT1338 i lost my iphone and my macbook pro does not show the icloud in system pref. What do i do? how do i download icloud?

    I lost my iphone and my macbook pro does not show the icloud in system pref. how do i get icloud on my mac?

    iCloud is only available in Lion, 10.7. You will have to upgrade to Lion in order to get into iCloud. If you transfered a .mac or .me address to iCloud through mobile me, or you have another device iCloud enabled, then you can log into the iCloud.com website.

  • My Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?

    I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
    It seems to be Apple bug.
    Thanks for you efforts

  • I am installing snow leopard on a new drive unformatted but it does not show the disk to install it on.? do i need to format first with one partition?

    I have installed a new drive on my mac book and more ram but the snow leopard install asks which to install the system on but then does not show the drive.
    do I have to partition it and name it first. -- if so just one partition?

    Do this:
    Drive Preparation
    1.  Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
    5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
    6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
    When formatting has completed quit DU and return to the installer.  Complete the OS X installation.

  • Acrobat Pro "save as" function in the file menu does not show the current directory of the file

    I have installed CC but Acrobat Pro gives me headaches.
    The "save as" function in the file menu does not show the current directory of the file but something I have worked on in the past.
    It forces me to navigates through my hard disk for this very straightforward thing in normal conditions. I precise: Acrobat is the only software reacting like that.
    I use Windows7 professional 64bits.

    I use what seems to be the latest version available on the Cloud:
    To illustrate my point, I open a directory with explorer and double-click on the only PDF in there:
    So here it is, open:
    When I do a "Save as", it takes me to a totally different place on the disk!
    Very annoying...
    Thanks for your time!
    JJ

Maybe you are looking for