PI Sheet error on: PI_PHACT - Message on activities

Hi
When I am completing a PI Sheet, I have the following errors on -
"PI_PHACT Message on activities"
The error messages are:
1)
Service 1 cannot be created manually
Message no. RU456
Diagnosis
The data 0.050 H was created for the work 1.
The definition of the standard value key in the work center determines that the work 1 should be given the duration that is generated by the pair formation (start/finish) of time events.
An additional manual calculation of work cannot then take place.
Procedure
With time event confirmations you may only create work for standard values to which no record class group (setup/processing/teardown) is assigned in the definition of the standard value key.
Proceed as follows:
1. First check which standard value key is maintained in the work center.
Execute function
2. Check whether a record class group is assigned in the standard value definition.
Execute function
2)
=> Destination PI11 COCI_CONFIRM_ACTIVITY cannot process the message
Message no. CB380
3)
=> Message is not sent to any destination
Message no. CB382
Diagnosis
In Customizing for the message category, it has been specified that the message can only be sent if it can be processed correctly by all its destinations.
However, one or more destinations could not process the message. For this reason, it is not sent to any defined destinations at all.
Procedure
Correct the message in the message monitor.
Please advise as to what the error is, as this error seems to not let the confirmations for the process order to be completed automatically, when I complete the PI Sheet.
It allows the goods movement and goods receipts to be processd normally, but not the confirmations
If I use transaction COR6N to do the confirmations manually, the confiramtions then process as per normal.
Please advise.
Thanx,
Keegan

Hi,
Even though PI sheet is completed with all the mandatory events/activites, it is not allowing us to Complete the PI sheet - it is throwing the error message - Unable to create message
Please let me know any pointers or where to look in to get this one corrected.
Many Thanks,
Madan

Similar Messages

Error in sending message

I am using solution manager 4.0 connecting it with ECC6.0. I am getting the following error message when I try to create a message
Error in local message system; message 009999000038 not complete
Message no. BCOS030
I have already followed the sap note 1011376 and deleted the container expression ITEM_PRODUCT_ID. Now there is nothing in the container.
Kindly guide me how to rectify the error also tell me th pre-requisites checking for sending a message from settalite system. Do I need to do certain settings in my ECC6.0 system too.
I have followed "service desk configuration guide for dummies" for the configuration
Regards
M FAROOQ ALI

Hello,
In the ECC 6.0 system you have to do two things:
- Define Service Desk Destination in the Satellite Systems
Use
In this IMG activity, you make the necessary settings in the satellite systems to enable users working in those systems to send problem messages to the central SAP Solution Manager system.
Requirements
Basis/ABA Support Packages have to be installed on the satellite systems. For further information, see the SAP Solution Manager Configuration Guide.
Activities
In the satellite systems :
In view 'Create Messages: Customizing' (Transaction SM30, view BCOS_CUST), make the following settings for the application OSS_MSG:
Column 1: Application: OSS_MSG
Column 2: + : W
Column 3: RFC Destination: <RFC destination to the SAP Solution Manager system>
Column 4: + : CUST620
Column 5: + : 1.0
Note:
We recommend to use the back destination you have already created.
If you want to use a back destination you have created before SAP Solution Manager Release 3.20 SP05, proceed as follows in the SAP Solution Manager System:
Generate the following roles in transaction PFCG.
Assign the following roles additionally to the user for the back destination:
SAP_SUPPDESK_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
- Perform Service Preparation Check for all Systems
Use
This activity fulfills the prerequisites for the delivery of SAP Services. The Service Preparation Check is a prerequisite for sending current data in the Early Watch Alert. The system collects the data required for the delivery of services, and connects to the SAPNet Support Portal. You get a list of recommendations, e.g. to import SAP notes which are required for the delivery of services.
Activities
This is a repeated activity. Perform the Service Preparation Check regularly in each system. The default setting in the Service Data Control Center task list is every 30 days. Perform this task in a system before SAP performs a service in it.
If you have imported the Add-On ST-PI 2005-1_<release> or higher, into your Solution Manager system and the satellite systems, you can perform the Service Preparation Check centrally, for all systems, from the Solution Manager:
1. Choose Environment -> Solution Manager Operations -> SDCCN Administration, in the Solution Manger System Landscape (SMSY), in the Solution Manager system.
You go to an overview of your systems.
2. To perform the Service Preparation Check for a system, choose theExecute icon next to the system.
You go to the transaction Service Data Control Center in the selected system.
3. Click on the Execute icon in the Service Preparation Check row.
You get a list of recommendations, e.g. to import SAP notes which are required for the delivery of services.
4. Carry out the recommended tasks, or go back.
5. Confirm the following dialog box.
6. To put the Service Preparation Check in your task list, choose Create.
7. Choose Service Preparation Check in the following dialog box.
8. Specify the time at which the check is to be made, and confirm your entries.
If you have not imported the Add-On ST-PI 2005-1_ <release> or higher, into a satellite system:
Run the program RTCCTOOL in the satellite system.
Hope this helps,
Dolores

Error while downloading. message on E71 GPS USA Ma...

“Error while downloading” message on E71 with updated GPS USA Maps
I’m sure I’m not the only one having this problem but I recently updated my maps on my Straight Talk Nokia E71. The phone says I have map download V 3.03 10wk bo4 Mw Open GL LM MN, Map version 0.1.25.114.and I’m using Nokia Ovi Suite 2.2.1.23. After I installed V3.03, I installed it and download the 1.46GB USA map file and the three turn by turn files. But when I first started the GPS app I started getting the following error “Error while downloading”(This is on phone only)
I have tried to factory reset the phone, re-format the 8GB memory card, remove City data and GF files and even unloaded OVI Suite and reload it. But every time I select GPS app and start to find places or my position, I get "Error while downloading" message. I’m new to this phone and didn’t get a respectable book from Straight Talk. So I don’t know much about this phone or Nokia OS. What is this error and how do I fix it. Also when I try to sync from the phone I get the response "system error". Ovi suite on the PC says I have downloaded all the USA maps and English voice with street names. Please help I’m at a lost.
Computer specs
I am running Win-Vista, with a Broadband connection. 3 GB Ram, 2 gig Pentium dual core.
Tran’s flash card has plenty room left on card over 5 gigs left.
If I need to delete a file on the phone please tell me the exact file name because I’m not sure which one to remove from the apps folder.
Solved!
Go to Solution.

@Action_Jackson
Welcome to the forum!
Whilst easy for me to say as keep very little data on device, I would suggest backup essential data then delete E:\cities + ,qf file followed by resetting device to "Out of box" state by keying in #7370# then 12345 (default Nokia lock code unless altered by yourself). At this point you would need to open OVI Maps application on device to re-initialise application and re-define necessary folder structure on memory card for device to be recognised by OVI Suite > Maps to re-download your regional mapping.
Happy to have helped forum with a Support Ratio = 42.5

Service desk error creating support message "help- create support message"

Hi
I'm customizing SM 7.0 SP Stack 15 service desk scenario. I'm in a VAR SAP, so It's a mandatory scenario.
I've done all basic settings from General Settings, Connection to SAP, Online Documentation, ...,
Business Partners, iBase, Basic BC-Sets for Configuration, Number Ranges. After them , for Scenario-Specific Settings-> Service Desk->Service Provider I've done all these steps. At SAP System Solution Manager, I've created solutions at dswp transaction and EW Alert are centralized these steps works. Transaction notif_create works and iBase are well mantained.
The problem is when I try create a support message from satellite SAP system. I logged With a SAP user which is BP, key user and has authorizations in a satellite system and I choose help->create support message, so a pop-up appears and I fill the fields, and I press button (Save/Send). An error appears:
Error in Local Message System: Access via 'NULL' object reference not possible. Message was Not Created
In order solve the error I review:
- The satellite SAP system is at the iBase installed components.
- I've Assign Number Range for ABA notifications at SLF1 transaction.
- I've Checked number range for Service Desk Message at SLFN transaction.
- I've configured ABA Message transaction DNO_CUST01, transaction DNO_CUST04
- (satellite system) Transaction sm30, table BCOS_CUST:
   Appl.            +       Dest.                                  +                     +
   OSS_MSG   W     SM_SMGCLNT010_BACK    CUST620          1.0
   TST_CUS                                                        0120009939
   RFC SM_SMGCLNT010_BACK works, SM recollects EW Alert from this satellite system
- (satellite system) I logged with a SAP user with these roles:
SAP_SUPPDESK_CREATE
SAP_BC_CUS_CUSTOMIZER according SAP NOTE 834534
SAP_BC_CUS_ADMIN       according SAP NOTE 834534
SAP_SV_FDB_NOTIF_BC_CREATE
SAP_SV_FDB_NOTIF_BC_ADMIN
All these roles are mantained.
- I've review SAP Notes 834534, 864195, 621927(I haven't applied this SAP Note because it's older)
Please could you help me?
Thanks and Regards
Raul

Hi,
When I try create a SAP message via help->create suuport message, I get the same error so I run help->create support message in a satellite system so I run help->create support message in Solution Manager
system. Also, a dump is generated in Solution Manager when I try create support message or from satellite or from solution manager.
========================================================================
Runtime Errors         OBJECTS_OBJREF_NOT_ASSIGNED
Date and Time          10.07.2008 10:17:26
Short text
    Access via 'NULL' object reference not possible.
What happened?
    Error in the ABAP Application Program
    The current ABAP program "CL_BOR_SERVICE_PPF============CP" had to be
     terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    You attempted to use a 'NULL' object reference (points to 'nothing')
    access a component (variable: " ").
    An object reference must point to an object (an instance of a class)
    before it can be used to access components.
    Either the reference was never set or it was set to 'NULL' using the
    CLEAR statement.
How to correct the error
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "OBJECTS_OBJREF_NOT_ASSIGNED" " "
    "CL_BOR_SERVICE_PPF============CP" or "CL_BOR_SERVICE_PPF============CM004"
    "PROFILE_CONTAINS_PARTNERDEP"
    If you cannot solve the problem yourself and want to send an error
    notification to SAP, include the following information:
Information on where terminated
    Termination occurred in the ABAP program "CL_BOR_SERVICE_PPF============CP" -
     in "PROFILE_CONTAINS_PARTNERDEP".
    The main program was "SAPMSSY1 ".
    In the source code you have the termination point in line 41
    of the (Include) program "CL_BOR_SERVICE_PPF============CM004".
=========================================================================
Thanks and Regards
Raul

Can't get firefox sync to work. I keep getting 'Error While Syncing' message

I am on Mac OS X 10.6.4, Snow Leopard on a Mini Mac a year old.
I got a message from X Marks telling me they were shutting down.
As I use my bookmarks every day and have thousands of them all sorted into folders I definitely never want to lose them or lose access to them if my house burns down or my computer is stolen!
I was using Firefox 3.6 and followed X Marks advise and downloaded Firefox Sync...but...won't work....kept giving me the 'Error While Syncing' message after trying to sync for a while. I looked at the blog and tried a few things like resetting password, restarting computer, checking my setting etc., but no deal. So, as the Firefox Sync download page told me that if I was using Firefox 4 beta the feature was built in and I didn't need the download, I then downloaded Firefox 4....which has removed my X Marks option, which was at least viable till after Xmas! and I still have the 'Error While Syncing' message beside the Sync button on my status bar....so now I am completely at a loss. The only thing I can do if I can't fix it up is go back to 3.6 and go on using X Marks while it is still available and pray that you get this sorted out before they dissappear.
I also like to be able to get my updated bookmarks on the other browsers I use, like Chrome and IE, so I would really appreciate it if you would include this cross browser sync capability as soon as you can. I have pledged X Marks that I would even pay for their service to continue as it seems they are so ahead of anyone else in their service and it is a large pain in the you know where that they can't keep going.
Thanks. and I hope you can help. From the blogs it seems that I am not the only one having this problem of getting the Firefox Sync working

@globaltruth
Thank you for your suggestion. I tried it. Unfortunately, the error message still sits on my statusbar, right after the Firefox Sync image.

Error while processing message to remote system

Hi,
I am trying to load the data from flat file to R/3. I am using the file adapter to pick the file and RFC adapter to transfer into R/3. I am getting the success status in the sxmb_moni and adapter framework(green for both the adapters). But when i check the status in the RWB message monitoring, I am getting the error.
I am using the message interface defined in the software component for R/3 system which has a different namespace. When i am trying to upload data, i am getting the error as namespace missing in RWB. The detailed error in RWB is as follows:
Exception caught by adapter framework: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara
Delivery of the message to the application using connection AFW failed, due to: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not get functionname from XML requst: com.sap.aii.af.rfc.RfcAdapterException: failed to read funtionname from XML document: missing namespace declara.
The previous thread relating this is:
Process Integration (PI) & SOA Middleware
Requesting for a solution.
Regards,
Raghavendra

Hi,
>>><i>So i tried creating a RFC(using sm59)in the R/3,
When i try to import the RFC i have created, I am not able to see the one i have created.</i>
In your R/3 system, go to se38, enter your RFC name. Go to attributes tab, and click on the radio button named "remote enabled"
This will enable your RFC to be called by an application outside the R/3 system.
>>><i>Can you please let me know as to what is it that it is connecting to the R/3(destination) and why am i not able to find my RFC.</i>
You are tyring to log on to your R/3 system, from xi, in order to import the RFC that you have created. Hence you are asked for user id and password.
You are not able to find your RFC since it has not been remotely enabled or has not been activated.
Regards,
Smitha.

File to RFC - error while processing message to remote system:com.sap.aii.

Hi
i m working on File to RFC scenario. the records are getting displayed in sender CC and receiver CC. But in receiver CC i m also getting the following error:
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
Error in processing caused by: com.sap.aii.adapter.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.adapter.rfc.core.client.RfcClientException: JCO.Exception while calling ZRFC in remote system (RfcClient[CC_RIS_STC_PIMASTER_RECEIVER]):com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user.
It was working fine few hours earlier but showing this error now. i was giving a SUBMIT program , but stopped that now.
But still facing the same problem. and in SXMB_MONI its showing recorded for Outbound processing.
could anyone help.

Hi
I am Facing Following Error When I am trying to call SAP Screen through JCO.jar
com.sap.mw.jco.JCO$Exception: (104) RFC_ERROR_SYSTEM_FAILURE: Screen output without connection to user
Please Guide Whethere it is possible to call SAP screen Through JCO.jar ot NOT
Please HELP if it is possible to Call SAP screen through JCO.jar with step and Code
Thanks
Vivek

Error in Seeburger Message Monitoring

Hi ,
I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file.
I m getting error in seeburger message monitoring with status as "Could not send ansynchrone MDN to partner - url not set!". can anybody tell me whats the reason behind it,where it went wrong.

Really didn't understand your scenario. That sentence makes no sense:
"I m using Seeburger as Sender R/3 System.and the receiver is Xi.as an idoc file."
But what I understand from the error message you have provided...................
if you are using Seeburger AS2 adapter as Receiver Comm Channel..........then there is definitely some cofig error is settings for MDN acknowledgement.
Under Parameters Tab:
You must have set the following parameter
MDN Mode = "ASYNC"
And has not provided the following parameter just below it :
Receipt Delivery Address
This parameter should have value: the URL of your own AS2
server where the asynchronous MDNs are
to be delivered.
Hope this solves your problem.
Regards,
Suddha

Oracle List of Error codes and messages

Hi,
In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?
Thanks

In our application we are planning to use sqlloader to load a huge amount of data into the database. However, to parse the log file we need a list of Oracle error codes and messages that are commonly encountered while loading data using sqlloader. Does anyone know where to get such a list?I don't know where to get such a list, but for a start you could search the log for the words "Error" and "ORA-"

While downloading apps from app store I'm getting unknown error has occurred message

Hi
I'm seeing the below problem from today morning..
I am using iPhone 4 unlocked (direct from apple store ). I am getting 'A unknown error has ovcurred' message while trying to download free apps from AppStore.
I am connected to wi-fi while doing this.
I used to download without any issues earlier. Please advise on what could be the problem. Thank muvh

Same problem here in Brazil.
It seems to be a problem with logging in App Store in the Mac (Yosemite 10.10.2).
When I tried the very same userid and password I was able to login in to use my iCloud account from the same computer and also from my iPhone.

Jdev11.1.1.6.0-Error while translating message to native format-FileWrite

Im reading a file from a service and transforming the data and writing them into a file through the external reference using a Mediator component.
I have no problem while building or deploying.
But while executing I get an error as follows:
Non Recoverable System Fault :
Exception occured when binding was invoked. Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'WriteAppointmentRequestInLogFile' failed due to: Translation Error. Translation Error. Error while translating message to native format. Please make sure that the payload for the outbound interaction conforms to the schema. ". The invoked JCA adapter raised a resource exception. Please examine the above error message carefully to determine a resolution.
My input is a File Adpater Read operation and output is File Adapter Write operation.
The schemas are as below:
Input schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
targetNamespace="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
<xsd:element name="doctorAppointmentRequestRoot"><xsd:complexType>
<xsd:sequence>
<xsd:element name="doctorAppointmentRequest" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C3" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C7" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C9" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C10" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C11" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C12" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C13" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C14" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C15" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
Output Schema:
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
targetNamespace="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
<xsd:element name="AppointmentRequestsLog"><xsd:complexType>
<xsd:sequence>
<xsd:element name="AppointmentRequest" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C3" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C4" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C5" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C6" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C7" type="xsd:int" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C8" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="C9" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>


Transformation XSL used in Mediator:
<?xml version="1.0" encoding="UTF-8" ?>
<xsl:stylesheet version="1.0"
xmlns:tns="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/ReadFileDoctorsAppointmentRequest"
xmlns:xp20="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.Xpath20"
xmlns:bpws="http://schemas.xmlsoap.org/ws/2003/03/business-process/"
xmlns:bpel="http://docs.oasis-open.org/wsbpel/2.0/process/executable"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:pc="http://xmlns.oracle.com/pcbpel/"
xmlns:bpm="http://xmlns.oracle.com/bpmn20/extensions"
xmlns:plt="http://schemas.xmlsoap.org/ws/2003/05/partner-link/"
xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/"
xmlns:ora="http://schemas.oracle.com/xpath/extension"
xmlns:socket="http://www.oracle.com/XSL/Transform/java/oracle.tip.adapter.socket.ProtocolTranslator"
xmlns:mhdr="http://www.oracle.com/XSL/Transform/java/oracle.tip.mediator.service.common.functions.MediatorExtnFunction"
xmlns:oraext="http://www.oracle.com/XSL/Transform/java/oracle.tip.pc.services.functions.ExtFunc"
xmlns:imp1="http://stmatthews.hospital.com/ReadFileDoctorsAppointmentRequest"
xmlns:dvm="http://www.oracle.com/XSL/Transform/java/oracle.tip.dvm.LookupValue"
xmlns:hwf="http://xmlns.oracle.com/bpel/workflow/xpath"
xmlns:med="http://schemas.oracle.com/mediator/xpath"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:jca="http://xmlns.oracle.com/pcbpel/wsdl/jca/"
xmlns:ns1="http://stmatthews.hospital.com/LogDoctorAppointmentRequests"
xmlns:ids="http://xmlns.oracle.com/bpel/services/IdentityService/xpath"
xmlns:xdk="http://schemas.oracle.com/bpel/extension/xpath/function/xdk"
xmlns:xref="http://www.oracle.com/XSL/Transform/java/oracle.tip.xref.xpath.XRefXPathFunctions"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:bpmn="http://schemas.oracle.com/bpm/xpath"
xmlns:ns0="http://xmlns.oracle.com/pcbpel/adapter/file/DoctorsAppointmentRequestProcessor/DoctorAppointmentRequestProcessor/LogDoctorAppointmentRequests"
xmlns:ldap="http://schemas.oracle.com/xpath/extension/ldap"
exclude-result-prefixes="xsi xsl tns pc plt wsdl imp1 jca xsd ns1 ns0 xp20 bpws bpel bpm ora socket mhdr oraext dvm hwf med ids xdk xref bpmn ldap">
<xsl:template match="/">
<ns1:AppointmentRequestsLog>
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C4>
<xsl:value-of select="concat(/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2,/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C3)"/>
</ns1:C4>
<ns1:C5>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C4"/>
</ns1:C5>
<ns1:C6>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C5"/>
</ns1:C6>
<ns1:C7>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C12"/>
</ns1:C7>
<ns1:C8>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C14"/>
</ns1:C8>
<ns1:C9>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C15"/>
</ns1:C9>
</ns1:AppointmentRequest>
</ns1:AppointmentRequestsLog>
</xsl:template>
</xsl:stylesheet>
Just in case if you are aware, Im trying the example in Lucas Jellema's book Chapter 7 and Im getting the error there in the first example project.
I have seen few very old threads on this problem in the forum but none of them had any answers so opening up a new one.
Thanks.

Your transformation with for-each look is incorrect.
This is what you have right now:
<ns1:AppointmentRequestsLog>
<xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C3>
<xsl:value-of select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest/imp1:C2"/>
</ns1:C3>This is the correct way to write for-each within XSLT:
<ns1:AppointmentRequestsLog>
<xsl:for-each select="/imp1:doctorAppointmentRequestRoot/imp1:doctorAppointmentRequest">
<ns1:AppointmentRequest>
<ns1:C1>
<xsl:value-of select="xp20:current-date()"/>
</ns1:C1>
<ns1:C2>
<xsl:value-of select='substring-before("doctor1234_20120926_helloworld","_")'/>
</ns1:C2>
<ns1:C3>
<xsl:value-of select="imp1:C2"/>
</ns1:C3>Also, check the flow trace in the EM console for the instance which errored out and paste here the data which is being sent to the FileWrite Adapter. Also, you need to ensure that any elements which are defined as xs:int should not have empty string as values. For example in your write schema C3 has int. So you should map C3 in XSLT like following:
<xsl:choose>
<xsl:when test="imp1:C2 and string-length(imp1:C2) > 0">
<ns1:C3>
<xsl:value-of select="imp1:C2"/>
</ns1:C3>
</xsl:when>
<xsl:otherwise>
<ns1:C3>0</ns1:C3>
</xsl:otherwise>
</xsl:choose>

INVALID_QUEUE_NAME : Error while scheduling message using qRFC

Hello SDNers
We are currently performing our PI 7.1 upgrade and one of our scenario uses a Sender SOAP of the type EOIO. We tried executing this scenario in PI 7.1 XID environment and in it worked fine without any errors but in our PI 7.1 QA environment it is giving the following errors
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">SCHEDULE_ERROR</SAP:Code>
<SAP:P1>XBQOC___*</SAP:P1>
<SAP:P2>INVALID_QUEUE_NAME</SAP:P2>
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Error while scheduling message using qRFC (queue name = XBQOC___*, exception = INVALID_QUEUE_NAME)</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Can you please exaplian what could be the issue we are facing.
Thanks.
Kiran
Edited by: Kiran Sakhardande on Oct 22, 2008 4:08 PM

HI Kiran,
Have gone throgh the following link?
INVALID_QUEUE_NAME
Regards
Sridhar Goli

Error while processing message payload Element 'CategoryCode&#39

Hi Experts,
I am trying to integrate SAP ECC with TM. I have transferred the sales order from ECC to TM, but its not triggering order based transportation requirement (OTR) instead giving an error Error while processing message payload Element 'CategoryCode&#39 and all the xml messages are stuck in inbound queue. The screen shot of the issue is as appended herewith. Please advise.
Thanks & Regards,
Aunkur De

Hi Aunkur,
The issue will generally come when a mandatory field in XML which you are not sending either or missed.
Please check if all mandatory fields are mapped properly.
Best regards,
Rohit

Error while processing message payload Element PI SXMB_MONI (ECC to TM)

Dear Experts,
while processing an XML message in TM using receiver interface IntracompanyTransportationRequestRequest_In , we encounter an error message.
<SAP:Stack>Error while processing message payload Element 'StockTransportOrderReferenceIndicator' missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
ssee screenshot attached.
The field StockTransportOrderReferenceIndicator cannot be located in ECC and I cannot find what the system is expecting to populate here.
Can somebody propose an approach on how to investigate into this error message for the solution?
thanks a lot
Salvador

Hi Salvador,
Thanks for your reply. We were able to fix that issue. As of now we have managed to send sales order to TM but getting the following error. Messages are getting failed in SAP TM. Even if the product exists in the system (TM) still the error message persists. I have CIFed location, business partner, product from ECC and everything exists in SAP TM with the same business system group. Kindly advise. Did you happen to face any similar kind of issue during your implementation ?
Thanks & Regards,
Aunkur De

Error while processing message

I have WS2RFC interface that use to work. I recieve in the RWB this error message from the RFC Reciever.
10/6/08 1:20:10 PM aa98b6f0-9398-11dd-94cf-0017a43cc516 Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: resource error: could not get a client from JCO.Pool: com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool RfcClient[RFC_Reciever]07cef9b030ce3c398f109f93020feffb is exhausted. The current pool size limit (max connections) is 1 connections.
any ideas?
Kfir

In RFC channel increase the maximum connections paramter value to 5. Save and activate.
Thanks,
Gujjeti

PI Sheet error on: PI_PHACT - Message on activities

Similar Messages

Maybe you are looking for