PI Sheet : Is it possible to Add Phase or Operation Text?

Hi Experts,
Is it possible to add phase or operation text along with phase number?
We are using browser base PI sheet and in the begining of the frame PI sheet shows phase number automatically like " Phase0101". Is ther any way to add short text of the phase instead of phase number or both?
This will really make my life easy.
Thanks in anticipation.
Kind Regards
RajaRam

In 013c defining process message category for process characteristic include standards characteristics of PP_PI Operation, PP-PI Operation text, PP-PI Phase, PP-PI Phase text also as characteristics,
After this when defing PI category 012c these characteristic appear along with process message charectestic.there define these as output characteristics. This will display phase no, phase text, operation no, operation text each time respective Process characteristic is recorded.

Similar Messages

Is it possible to add a gradient to text in adobe edge animate?

i'm wondering if it's possible to add a gradient to text in adobe edge. I come from the flash world and new to edge. I'm trying to eliminate importing a series of text blocks as art. Can anyone add some insight please?
thanks in advance!

Check this out :http://css-tricks.com/snippets/css/gradient-text/
Sent from Mailbox
On Mon, Jun 16, 2014 at 4:52 PM, Marie Goodwyn <[email protected]>

Is it possible to add or change OCR text in a batch process?

Hello,
This is my first submission. Really hope you can help as if there's a solution to this it will significantly help our business.
Is it possible to 'batch process' the adding or changing of OCR text in a PDF?
This might sound like a strange process but let me explain what we do:
1. We scan old, handwritten books and registers. Typically these registers contain lists of information. Each page will be scanned to a filename like pge01.jpg, pge02.jpg, pge03.jpg etc.
2. We transcribe the content of each page. Each page will contain mulitple records (i.e. 20 records) typical fields might be:
Unique ID
Surname
Forename
Year
Address
Filename (i.e. pge02.jpg)
3. We provide this content back within database driven software so that when a user performs a search on say 'Surname=Jones' & 'Year=1945' then all of the scanned pages that match that contains handwritten text that matches that search criteria is displayed in a list. The user can then click on a search result and see the scanned page containing that record.
Rather than provide database driven software, we'd simply like to produce a standard PDF file. Each page within the PDF will show each of the scanned pages (pge01.jpg, pge02.jpg, pge03.jpg etc.). But where you would normally store the 'ocr recognised text' behind each image, we would like to show our transcribed content.
If this is possible, then I realise that it's likely that you can't do field searches (i.e. 'Surname=Jones' & 'Year=1945') but at the very least I'd be able to type 'Jones' in to the search box and it would find all pages that contained the transcribed word 'jones'.
If it's possible to add the transcribed data as 'ocrd text' then is it possible to do it in some sort of batch process? We scan lots of big books and capture millions of records - so doing it manually is not an option.
Any help that anyone can provide will be hugely appreciated.
Thanks,
Paul

I don't think it's possible to manually add OCRd text, but you can add form
fields with the text in them. And yes, it is possible to search the content
of form fields, using a script.

Is it possible to add and delete some text in a file?

Hi everybody!!!
I would like to add something and delete it later on into and from the text file. Is it possible? do anybody have any idea to help me out?
ciao...

Read the text file in sequentially, write out the modified version to a new text file sequentially.

Is it possible to add a barcode image generator API on HTMLDB that support

Hi All,
Currently we create Barcodes images using a Java solution - open source API called Barbeque.barcode.servlet. Is it possible to add a barcode image generator API on HTMLDB that support multiple formats?
Our current process:
All jobs created in our system require a barcode which is then printed onto a cover sheet for each job (refer example). We also currently have individual barcodes printed on a single feed barcode printer for attaching to jobs sheets. We also print A4 sheets of barcodes with the Field Technican id number on that we sent out to them.
Thanks in advacne
Manoj

It certainly is possible to call Java from PL/SQL and so therefore from APEX.
The process is fairly well documented online and there's a well cited example of calling Apache FOP within these forums.
You may however need to do a little work to wrap your Java library using static methods in order to do this.
Regards
Ben

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

In Numbers 08 is it possible to add a link to a file on the local disc within a cell?

As it's a feature asked several times, maybe it will be available in the next version.
I don't know features available in Excel.
Sometimes ago I posted an AppleScript which may perhaps fit your needs.
If you insert in a table pathnames of files stored in your HD, select the cell, trigger the script, open the file.
Here is an updated version :
--[SCRIPT open_a_file]
Enregistrer le script en tant que Script : open_a_file.scpt
déplacer le fichier ainsi créé dans le dossier
<VolumeDeDémarrage>:Utilisateurs:<votreCompte>:Library:Scripts:Applications:Numb ers:
Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
Sélectionner la cellule contenant le chemin d'accès
Aller au menu Scripts , choisir Numbers puis choisir “open_a_file”
ouvre le fichier.
--=====
L'aide du Finder explique:
L'Utilitaire AppleScript permet d'activer le Menu des scripts :
Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
Cochez la case "Afficher le menu des scripts dans la barre de menus".
--=====
Save the script as a Script: open_a_file.scpt
Move the newly created file into the folder:
<startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
Select the cell containing the pathname
Go to the Scripts Menu, choose Numbers, then choose “open_a_file”
open the file
--=====
The Finder's Help explains:
To make the Script menu appear:
Open the AppleScript utility located in Applications/AppleScript.
Select the "Show Script Menu in menu bar" checkbox.
Save this script as a … Script in the "Folder Actions Scripts" folder
<startupVolume>:Library:Scripts:Folder Action Scripts:
--=====
Yvan KOENIG (VALLAURIS, France)
2010/02/02
2011/04/28 - replaced the getSelParams handler by the get_SelParams one
--=====
on run
          set {dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
          tell application "Numbers" to tell document dName to tell sheet sName to tell table tName
                    set maybe to value of cell rowNum1 of column colNum1
          end tell -- Numbers
          tell application "Finder" to open maybe
end run
--=====
set { dName, sName, tName, rowNum1, colNum1, rowNum2, colNum2} to my get_SelParams()
on get_SelParams()
          local d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2
          tell application "Numbers" to tell document 1
                    set d_Name to its name
                    set s_Name to ""
                    repeat with i from 1 to the count of sheets
                              tell sheet i to set maybe to the count of (tables whose selection range is not missing value)
                              if maybe is not 0 then
                                        set s_Name to name of sheet i
                                        exit repeat
                              end if -- maybe is not 0
                    end repeat
                    if s_Name is "" then
                              if my parleAnglais() then
                                        error "No sheet has a selected table embedding at least one selected cell !"
                              else
                                        error "Aucune feuille ne contient une table ayant au moins une cellule sélectionnée !"
                              end if
                    end if
                    tell sheet s_Name to tell (first table where selection range is not missing value)
                              tell selection range
                                        set {top_left, bottom_right} to {name of first cell, name of last cell}
                              end tell
                              set t_Name to its name
                              tell cell top_left to set {row_Num1, col_Num1} to {address of its row, address of its column}
                              if top_left is bottom_right then
                                        set {row_Num2, col_Num2} to {row_Num1, col_Num1}
                              else
                                        tell cell bottom_right to set {row_Num2, col_Num2} to {address of its row, address of its column}
                              end if
                    end tell -- sheet…
                    return {d_Name, s_Name, t_Name, row_Num1, col_Num1, row_Num2, col_Num2}
          end tell -- Numbers
end get_SelParams
--=====
on decoupe(t, d)
          local l
          set AppleScript's text item delimiters to d
          set l to text items of t
          set AppleScript's text item delimiters to ""
          return l
end decoupe
--=====
on parleAnglais()
          local z
          try
                    tell application "Numbers" to set z to localized string "Cancel"
          on error
                    set z to "Cancel"
          end try
          return (z is not "Annuler")
end parleAnglais
--=====
--[/SCRIPT]
Oops, I forgot that you are asking about Numbers '08 which hasn't AppleScript support.
Yvan KOENIG (VALLAURIS, France) jeudi 28 avril 2011 16:26:39
Please :
Search for questions similar to your own before submitting them to the community

Is it possible to add markups to a PDF that I am not the author of

Most of the PDFs I generate are from other applications (like Autocad) where I "print to PDF" to create the file.   Most of the PDFs I recevie are generated the same way.   Prior to Acrobat Reader 8, it was simple for me and my collueges to exchange information on these PDFs by using markup tools and resending them with markups.   Since Acrobat 8 has come along, I now find it impossible to markup a drawing (no matter if I have created it using Print to PDF or if someone has sent it to me). I went to the knowledge base and see that the drawing has to be enabled for markup in one of 2 ways
In an open PDF, choose Comments > Enable For Commenting In Adobe Reader, and then save the PDF.
Start the wizard to initiate a shared review or an email-based review and follow the on-screen instructions. When you’re finished, commenting is enabled in the PDF that you specify for the review.
Well, there is no Comments selection in my toolbar.   Second method is given by
Quickstart: Start an email review
An email-based review lets you track review status and merge received comments into the PDF.
Click Review & Comment and choose Attach For Email Review.
If prompted, enter your identity information to create a reviewer profile.
Follow the on-screen instructions to select the PDF, invite reviewers, and send the email invitation.
If your email application doesn’t send email automatically, you may need to answer alert messages and switch to your email application to finish sending the message
But there is no Review & Comment button to click.
So, can someone tell me, can I still do a simple markup of any PDF?   Even if I have to jump through hoops can I?    I guess I can understand Why Adobe has done away with this feature in their free tool, as they were not getting any revenue off of it, but it greatly diminishes the usefulness of Acrobat Reader and therefore all PDFs for me.
Thanks in advance for your response.

To enable this right you need Acrobat, not the free Reader.
However, starting from Reader X it is possible to add simple markups to any file, unless it has been specifically disallowed by the creator of the file.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to him.

In contacts there is the possibility to add a new event, as the birthdays, but they do not appear in iCal. Is there any way to make that possible? It is normal to have a person with his birthday, anniversary and others key dates you want to link to such person, but the only one shows up is the birthday. How to be able to show all those dates linked to people in the agenda in the iCal?
Thanks

Hi,
I sugggest you try my application, Dates to iCal. It is shareware with a 2 week trial period.
Dates to iCal 2 is a replacement for Apple's birthday calendar for iCal. It has a range of features to allow the user to choose what, and what not, to sync to iCal from Address Book.
As well as automatically syncing birthday dates from Address Book, Dates to iCal 2 can sync anniversary and custom dates. It can set up to five alarms for each date in iCal and can also set different alarms for birthdays and anniversaries. It allows the option of only syncing from one Address Book group. This application also allows for the titles of the events sent to iCal to be modified to the user's preference.
Best wishes
John M
As I sell software on my site and ask for donations, the Apple Support Communities Use Agreement requires that I state that I may receive some form of compensation, financial or otherwise, from my recommendation or link.

Is it possible to add text to a non-fillable form using Reader DC?

TLDR: Can I add text to a form (e.g., fill it out) using Adobe Reader DC on Windows, or can that only be done with "fillable" forms? If so, how?
I'm attempting to fill out a fairly lengthy "paper" form. The form is not a fillable form, it is a government form that is downloadable for printing but for whatever reason the government agency chose not to enable the "fillable" feature.
On my Mac, I can just use the "text box" tool in the Preview app to add all of the text that I need to complete this form.
On Adobe Reader DC, which is installed on my Work PC running Windows 8, nothing happens when I click the "fill and sign" button and the features displayed in the online tutorial simply don't show up. There's no text tool. I just see the "hand" icon. When I right-click, I get an option for the Select tool, which enables me to select text, but doesn't allow me to add a text box. The web tutorial says there should be a menu somewhere with an icon to add a text box, but that icon is just straight up missing.
I am very confused by this software. I am not an idiot with computers; but I am a bit old, and I'm more used to keyboards, toolbars, and windows than this "pane" based touch-oriented approach. The toolbar up top seems to be limited to a "pane selector" between Home, Tools (which just reveals a panel of icons most of which are links to cloud services that I don't want), an then a few file handling icons. On the right there is a little panel that says "get started" and offers only two clickable functions, "Send & Track" and "Get Others to Sign" neither of which reveals any text tools.
Now, the answer to my question very well may be "no" which is fine, I'll just keep using my Mac for the task since I know that it works, but I'd really like to be able to leave my personal computer and get everything done within Windows. Surely this isn't one of those things that can only be done on a Mac or with expensive third-party software on a PC. But the web seems to insist that this is a thing that should be both possible and simple. Is it?

You can try the comments tools.

Is it possible to add a graphics card to the back of my HP

Hello I want to know if it's possible to add a new graphics card to the back of a Laptop not inside of it but on the back of my laptop ??? my graphics Card is a Intel 4000 graphics card is a terrible for gaming TERRIBLE !!!

Not sure where it would go on the back, but no the system is closed. There is no place to insert a graphics card or attach it. You will find some hokey stuff on the internet where people say you can plug a video card in the wireless card slot but those are a hoax at worst and at best they do not tell you that such a thing would not even perform as well as what you have and is likely to damage the motherboard.

Is it possible to add a backlit keyboard to an hp envy touchsmart 15

is it possible to add a backlit keyboard to an hp envy touchsmart 15?

Daevid.
Yes you can.
Your manual here.
http://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0CB8QFjAA&url=http...
Page 20 chapter 3.
REO
HP Expert Tester "Now testing HP Pavilion 15t i3-4030U Win8.1, 6GB RAM and 750GB HDD"
Loaner Program”HP Split 13 x2 13r010dx i3-4012Y Win8.1, 4GB RAM and 500GB Hybrid HDD”
Microsoft Registered Refurbisher
Registered Microsoft Partner
Apple Certified Macintosh Technician Certification in progress.

Is it possible to add a hdmi port? Hp envy 23-d010ea all-in-one

I wanted to get a Ps4 soon but i dont have a tv, and on my computer i dont have a hdmi port. i see on other models of my computer they have it for example on the 23-d052 its like this
Where as on my one is like this
so that part is just an empty space. i was wondering if it were possible to add the hdmi port or if there was a way i could still play the ps4 on my computer?
This question was solved.
View Solution.

The USB 3.0 to HDMI adapter referenced above, is only designed to connect to a USB port on you computer and output an HDMI signal to an HDTV or monitor. It will not allow you to connect the HDMI output of a game console to your computer.
It may be possible to purchase all the components necessary to add that functionality to your computer, however the cost would far exceed the price of a new monitor or HDTV. Please purchase an inexpensive HDTV or monitor to use with your PlayStation.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Is it possible to add a new graphics card to my macbook pro 2011 13"

Is it possible to add a new graphics card to my macbook pro 2011 13"?

Hi W,
Sorry, but no. It's soldered onto the logic board.

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the SearchText and IF statements that change the URL depending on what is typed?

When creating a custom SearchPlugin, is it possible to add more code such as uppercase conversion of the searchTerms and IF statements that change the URL depending on the searchTerms? Every time I try to add something firefox doesn't want to add it as a search plugin. I need to create a more powerful search tool for personal use.

I've found some external software applications that will do it, so that leads me to believe its not possible within ID CC.

Is it possible to add more than one page at a time in pages - word processing?

Is it possible to add more than one page at a time in pages - word processing?

I haven't been able to find a way to add more than one page at a time. I think you'll have to add them one at a time.

PI Sheet : Is it possible to Add Phase or Operation Text?

Similar Messages

Maybe you are looking for