PI Szenarion with an existing Enterprise Service

Hello,
i will design and configure an szenario with using PI 7.1 and an Discovery System. For this i will use an existing Enterprise Service. These Service is deployed on the Discovery System.
Service:
Read Purchase Order
Enterprise Service Operation
How can i realize this? Exists for this szenario or an other one an How-To-Guide?
Best regards
Maik

Maik,
From SAP ES work place find out in which Service Pakc of ECC this service is available. Search for that pack in SAP Service Market place and download the archive. Import this in to PI. Once you see the software component in XI, check if the discovery ECC has this enhancement installed already. If not you have to get that installed. Then goto SPROXY transaction and see if the service you want to use is enabled. Now you can create your outbound interface, message type and data type in XI and configure the scenario.
VJ

Similar Messages

How to map business process and enterprise service?

Recently, I read some documents about ESA. I'm confusing about the relationship between business process and enterprise service. In other word, how to map the business process to enterprise service after the business process is analyzed? Is there any methodology/rule to define business process and wrap them into service in ESA?

Hi Sherry,
I like to add some of my thoughts about that discussion. From my point of view ESA is much more than just another BPM or Enterprise BPM. ESA is adresses six key areas and I think all of them are really needed:
- People Productivity as the word itself describes...it's about portals and productivity.
- Embedded Analytics has to integrate transactional and analytical content.
- Service Composition is used for model-driven service composition and services orchestration.
- Service Enablement is about a Enterprise Services Repository filled with business meaningful Enterprise Services and service patterns for enabled objects. Excactly this is where SAP has years of experiences.
- Business Process Platform is about service enablement of all application platform objects and engines. This is the place where "BPM" for core business processes resits.
- Life-Cycle Management has to cover the deployment, configuration, operation and change management for ESA based processes.
Therefore the term "BPM" is located in serveral layers of an ESA approach. On the level of Business Process Platform BPM is providing the choreography for core business preocesses.
At Service Enablement BPM needs to compose out of granular services (I would say "atomic" services)
buiness meaningful services (here we have "molecular" services).
The third level where BPM could be used is Service Composition because exactly this is the place
where serveral Enterprise Services could be combined to a process representation.
To come back to the discussion:
1. The question should be how to indentify business meaningful services which could represent single process steps. ATP check, Credit card check, ... could be examples. In theory this service could be out-tasked, defined more flexible etc. This means that processes needs to be evaluated for Enterprise Service candidates. Afterwards you can check against SAP's Enterprise Services Repository for already existing Enterprise Services. The evalution for enterprise services candidates will be supported by the metodology mentioned by Kaj and David.
2. I think domains in this context should be motivated by business and/or functional areas. Depending on the granularity. For example Order Fulfilment Services, Master Data Services, Search Services... These kind of serices can be combined again to services such as "Search of Master Data" (Search Service + Read Master Data Service) etc. or can be used to generate UI to be used in a ESA application.
Your thoughts?
Very best regards
Wulff

Enterprise Services in ECC using SPROXY transaction

Dear All,
We were able see the Enterprise Services available in ECC 6.0 EHP 3 using the transaction SPROXY, we have even tested one proxy through this transaction. But now when we have configured ECC to connect the ESR (of PI), it is only showing Software components / Service Interface available in ESR throught the SPROXY transaction in ECC and not showing the Enterprise Services which are available in ECC.
How to see both the things, existing Enterprise Services of ECC and Service Interfaces of ESR through SPROXY transaction in ECC?
please help.
thanks and regards,
Ravi

Hi Ravi,
It may be that you just need a delta cache refresh but I would start by checking the SLD configuration.
First strt with SAP Note: 1169869
- I think that you might need to try changing the vendor (sap.com) that's assigned to the Software Component Version.
- If you were seeing the SWCV before it should be installed on your system anyway but you can double check using the steps I've specified here: [Can't find ESA ECC-SE 603 SWCV;
- You might also want to check if the SWC is correctly assigned to the relevant business system/s in the SLD.
Regards, Trevor

Extending an Enterprise Service

I am looking for a step-by-step guide that explains how to extend an existing Enterprise Service to add and process additional fields to the standard data type the is used by that service. This includes the changes to be made in PI and the target system hosting the Enterprise Service.
Can anybody point me to a good article or blog?
Kind Regards,
Tony.

I am not sure if there is a blog. But this is what you should do -
1. Find the associate enterprise service PI content. Find the message type and the data type with in.
2. Select the data type at which you want to add new field and create an enhancement for this data type under your own namespace. Activate.
3. In Host system, SPROXY, select your enhancement and create proxy. Activate. you should now see the enhanced fields in the standard service structure.
VJ

Create Costumer & Account creation, enterprise Services

Hi guys!
I'm searching for Enterprises Services that resembles to the TX codes: FD01 (Cosutmer Creation) and F-36 (Account Creation). I want to use an existing enterprise service insted of developing an interface where I can Create a Costumer (tx FD01) and to create an Account (Tx F-36).
Can you please advise me where to find it?
Thank you!!
Felipe

Hi,
I found following service in CRM: Customer Business Object [http://esworkplace.sap.com/socoview(bD1lbiZjPTAwMSZkPW1pbg==)/render.asp?id=39F47C2060B211DA36BB000F20DAC9EF&fragID=&packageid=DE0426DD9B0249F19515001A64D3F462&iv=]
You can search for services in ES workplace and review fileds to see if those services are suitable for you.
Regards,
Gourav

Question about SAP Enterprise Services Explorer 1.1

Hi ,
 1. I use dotnet connector before and now someone told me that I can use SAP Enterprise Services Explorer 1.1
 but when I download this app, it says '90 day evaluation ';
 what about after 90 days?
 2. another questions, our warehouse will perform a WTS<Warranty Tracking System> which needs scan some barcode,
 and our scanner's OS is Windows Mobile 5.0 which<Model:intermec 700C> can be developed in VS 2005.
 my question is can I develop a windows mobile application with using SAP Enterprise Services Explorer 1.1?

From a mobile PC application you can connect only webservice or you should have to develop you own RFC connector from zero.
the architecture I use for Pocket PC is some webservices hosted in a .net webserver. The pocket PC connects the .net webserver and my webserver used a RFC proxy. My RFC proxy is built with SAP .net connector, JCo, or Erp connect, a .net api for sap developped by a great guy ... [http://www.theobald-software.com/oe/cms/website.php?id=/en/index/products/erpconnect.htm|http://www.theobald-software.com/oe/cms/website.php?id=/en/index/products/erpconnect.htm]

Transfer Of Data from Sap to Oracle with the help of Enterprise Services.

Hello,
We want to transfer data from Sap to Oracle using standard Enterprise Services.Some fields were not available in the existing standard Enterprise Services,so we have enhanced the existing Services by writing code inside BADI available with Enterprise Services.Rest of the fields we have mapped with the existing fields available in standard Enterprise Services.But,the Oracle people want to fetch all data from Sap without entering any input as a mandatory field in the Enterprise Services.The existing standard Enterprise Services require to enter any field as mandatory and are not accepting the range in input for multiple records.e.g.All enterprise Services related to Sales Orders are displaying only one sales Order.We have searched all Enterprise Services for Sales Order(related to reading of data),but not able to find service which would display mutiple records without entering any input.ECC_SALESORDER009QR is the only service which is displaying multiple records without entering any input,but the required fields are not available in this service.So,kindly suggest what we need to do further.
1.Should we go for customization of services completely,so that it would fulfil our requirement.
2.Are there standard Enterprise Services exists which would we give us data in range(all records).
If they exists,please specify the names of Services for reading Purchase Order,Production Order,BOM etc.
Thanks & Regards,
Divya.

Hi Vaibhav,
Let me tell you the objective in detail.
Objective.
To develop a package solution which will work as a bridge between Oracle APS and SAP system so that customers using SAP will be able to use advantages of Oracle APS for their planning needs.
This will consist of following major components:
OA Templates is an Oracle utility to load data from any legacy system to Oracle APS using standard flat files.
Oracle has developed an Application Integration Architecture which is a standard architecture used for integration of Oracle products with other systems.
Enterprise services is an SAP utility to communicate with SAP.
AIA canonicals are standard canonicals developed by Oracle where we have to map data fields from destination system (Oracle APS) and source system (SAP)
Fusion middleware is being used to develop application interfaces following AIA standards.
Tasks at stake:
Mapping of Oracle APS fields and SAP Enterprise Service fields to AIA canonicals
Technical work of developing middleware using Oracle Fusion
From Sap side,we have to map fields which we have received from Oracle with the help of Enterprise Services,rest consumption of these services is done by Oracle guys.So,suggest is there enterprise services available which would give us multiple records .
Thanks & Regards,
Divya.

CF8 Verity "The collection you specified does not exist or is not registered with the ColdFusion Search Service."

I'm running ColdFusion 8 Enterprise on linux. I'm able to
create collections and index them through cfadmin as well as in cfm
application pages, but when trying to search I get the error
"The collection you specified does not exist or is not
registered with the ColdFusion Search Service."
I'm using the collection name in cfsearch and not the full
path.

Would I have been better off posting this in the General
Discussion section? Could the moderators move it if so,
please?

Callable Objects (GP) with Enterprise Service.

Hi,
I have a question.
Is it possible, with a callable Object (GP), to obtain information on any budget, from ECC6, through a Web Service or Enterprise Service, provided by ECC6?
Is it possible, to modify and save the budget without using any bapi, but directly through an enterprise service, from ecc6?
Thanks
Regards
David.

Hi David,
If Enterprise Services for the underlying Business Objects ("Budgets" in ur case) already exists and you have the required enhancement pack, then definitely you can go ahead and use enterprise Services.
Otherwise, you can use the existing BAPIs and RFCs to modify the same business object (RFC, BAPI can be consumed from CAF).
And if you want your application to be SOA compliant. Then you can create new functions and expose them as web services, which can then be used from any other application to modify the business object.
Hope this helps,
Ashutosh

Integrating a PHP Web App with an Existing Azure Mobile Services and Mobile App

I've got an existing mobile app that is integrated with Azure's mobile services. The mobile services are currently connected to Azure Active Directory with MFA enabled. I'd like to build a separate PHP-based web application (Azure VM) that uses this existing
mobile service and authentication.
I reviewed the Azure PHP SDK, but didn't see any tie-ins to the Mobile Service. Additionally, Azure has some great tutorials, but for mobile services they all seem to focus on iOS, Android, and Windows phone. Any insight into how to tie a PHP-app into this
backend would be much appreciated!

Although there isn't any client library for PHP, you can still access Mobile Service using the
Azure Mobile Service REST API.
Abdulwahab Suleiman

Problem with models in the enterprise service builder

Hi all,
I get this message from the enterprise service builder, when i double click on one of the models on the tree on the left of the builder itself.
the message says:
Error Initializing Business Modeling
Initialization of business modeling cannot be started. You cannot work with business modeling. Check tht all required configutarion objects are available
i made all the wizards suggested in /people/werner.steyn/blog/2008/03/03/how-to-look-like-a-hero-with-netweaver-ce-esr-sr
please someone can help me to understand what the massage means?
what is a configuration object? what can i do to fix the problem?
thank you very much

closed

System requirements for BO Enterprise XI 3.0 with 3 cloned webi services

Helllo,
I'm wondering what the system requirements would be for a server to host a BO Enterprise system (XI 3.0) if it is connected to a SAP BW system.
The system should be able to cope with around 150 to 200 calls/requests maximum at a time.
The users log in into SAP and launches a request via an SAP screen with behind that an URL request that is constructed based on a guest account (max 200 requests at the time) for BO. Because it is always the same account (Guest) that is used over and over again I'm wondering what kind of additional requirements the system should support.
We did some stresstesting with 120 simultaneous users. Even with 3 cloned web intelligence processing servers it blocked several times.
For the moment it is running on following hardware specifications:
HRBOXI (Dell PowerEdge 2950 (Servicetag: GMZ834J))
Memory: 8 memory slots available on motherboard of which 2 are used (each is 2GB) Total available memory at this moment is 4GB.
CPU: 2 x Intel Xeon E5420 (quad core). There are 2 CPU sockets on the motherboard that are in use.
Disks: 2 x 146GB (15K) SAS
On that there is a 32bit operating system in use. We would like to start with upgrading that to 64 bit OS.
Can someone tell me if this machine is suitable for production purposes for BO Enterprise linked to an SAP BW on mainly HR-data? I mean by that does this machine has enough processors to be able to cope with 3 cloned webintelligence services at a time. And also enough RAM memory?
Many thanks Thierry Renaer

not of use anymore

The collection you specified does not exists or is not registered with the ColdFusion Search Service.

While upgrading to CF7 from CF5, I am creating the new collections from Cf Admin. After creating, I indexed it from cf admin and then trying to search for the documents in that collection, and i am getting the following error. This was working yesterday. I have cheched the logs etc and nothing seems helpful in discovering what the issue is.
Document count is 11,745 and the size is 25,948 kb, which is not too much for a collection. I have tried to restart Cold Fusion Search Services and then ColdFusion Application services, but all in vain.
Any help on this would be greatly appreciated.
Detail
The collection you specified does not exists or is not registered with the ColdFusion Search Service.
Message
The collection rc_collectiom does not exist.
StackTrace
coldfusion.tagext.search.CollectionDoesNotExistException: The collection rc_collectiom does not exist. at coldfusion.tagext.search.SearchTag.verifyLocale(SearchTag.java:819) at coldfusion.tagext.search.SearchTag.doSearch(SearchTag.java:200) at coldfusion.tagext.search.SearchTag.doStartTag(SearchTag.java:159) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfeFull2dText2dReDirect2ecfm511389924.runPage(C:\Inetpub\wwwroot\External\FullText\eFull- Text-ReDirect.cfm:43) at coldfusion.runtime.CfJspPage.invoke(CfJspPage.java:152) at coldfusion.tagext.lang.IncludeTag.doStartTag(IncludeTag.java:349) at coldfusion.runtime.CfJspPage._emptyTag(CfJspPage.java:1915) at cfApplication2ecfc179940445$funcONREQUEST.runFunction(C:\Inetpub\wwwroot\External\Applica tion.cfc:114) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:344) at coldfusion.runtime.UDFMethod$ReturnTypeFilter.invoke(UDFMethod.java:290) at coldfusion.runtime.UDFMethod$ArgumentCollectionFilter.invoke(UDFMethod.java:254) at coldfusion.filter.FunctionAccessFilter.invoke(FunctionAccessFilter.java:56) at coldfusion.runtime.UDFMethod.runFilterChain(UDFMethod.java:207) at coldfusion.runtime.UDFMethod.invoke(UDFMethod.java:169) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:194) at coldfusion.runtime.TemplateProxy.invoke(TemplateProxy.java:146) at coldfusion.runtime.AppEventInvoker.invoke(AppEventInvoker.java:72) at coldfusion.runtime.AppEventInvoker.onRequest(AppEventInvoker.java:178) at coldfusion.filter.ApplicationFilter.invoke(ApplicationFilter.java:215) at coldfusion.filter.RequestMonitorFilter.invoke(RequestMonitorFilter.java:51) at coldfusion.filter.PathFilter.invoke(PathFilter.java:86) at coldfusion.filter.LicenseFilter.invoke(LicenseFilter.java:27) at coldfusion.filter.ExceptionFilter.invoke(ExceptionFilter.java:69) at coldfusion.filter.BrowserDebugFilter.invoke(BrowserDebugFilter.java:52) at coldfusion.filter.ClientScopePersistenceFilter.invoke(ClientScopePersistenceFilter.java:2 8) at coldfusion.filter.BrowserFilter.invoke(BrowserFilter.java:38) at coldfusion.filter.GlobalsFilter.invoke(GlobalsFilter.java:38) at coldfusion.filter.DatasourceFilter.invoke(DatasourceFilter.java:22) at coldfusion.filter.RequestThrottleFilter.invoke(RequestThrottleFilter.java:115) at coldfusion.CfmServlet.service(CfmServlet.java:107) at coldfusion.bootstrap.BootstrapServlet.service(BootstrapServlet.java:78) at jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:91) at jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42) at jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:257) at jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:541) at jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:204) at jrunx.scheduler.ThreadPool$DownstreamMetrics.invokeRunnable(ThreadPool.java:318) at jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:426) at jrunx.scheduler.ThreadPool$UpstreamMetrics.invokeRunnable(ThreadPool.java:264) at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

So at last I figured this out myself and found a temporary resolution for this kind of problem. Majority of the times try creating the Collection through Cfcollection tag and then index it using cfindex tag, rather than performing these operations from the Cold Fusion 7 administrator.
The only reason I can think of which might have caused the issue is – I have thousands of documents in the collection which I indexed. So while indexing the page gets expired. So I tried again to index it. This time the collection got indexed fairly quickly and I got the response that the collection has been indexed successfully. So for the first time when I tried to index the collection, there might be some piece of code, which did not register the collection properly and hence giving this error.
When I did the same function using the code, with exactly same set of documents, it did not throw any error, even when I executed it for the first time. So the collection indexed properly.
I am not claiming that technically this theory is correct, but this seems to be the problem.
If someone knows technically what has happened at the back, please share it. For the time being, this is the fix – if you experience any problem in creating/indexing collections through cfadmin in CF7, do it thorough code.

Set-AzureServiceDiagnosticsExtension or publishing with diagnostitcs enabled fails with Azure SDK2.5 for existing Azure services

Similar to https://social.technet.microsoft.com/Forums/systemcenter/en-US/487234f4-9748-4f49-ab7b-ce523da4c500/publish-cloud-service-fails-from-visual-studio-2013-update-4-published-asset-entry-for-image but since the given answer provides no solution
and I found more details, I felt that opening this new question providing more details was necessary.
I have an existing Azure service with two web roles (service and worker) published first in May 2012. Recently I tried to update from SDK2.2 to SDK2.5 and Visual Studio 2013 Update 2 to Update 4. The main reason behind this was to move from log4net to WAD
and in doing so, of course directly move to the new diagnostics version. So before publishing I enabled WAD diagnostics logging in the properties of both roles.
Trying to publish from Visual Studio to the exisiting Azure Service fails, VS output shows the following lines:
11:45:24 - Checking for Remote Desktop certificate...
11:45:25 - Applying Diagnostics extension.
11:45:45 - Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
What's working 1: For testing purposes, I have created a new Azure service in the Azure portal.
Publishing the same solution from the same development environment to this new service is possible without problems - the service with WAD diagnostics logging is working fine. Unfortunately this is no solution to my production service, with
DNS alias and SSL certificates bound to the existing Azure service.
What's working 2: Publishing the solution to the existing Azure service WITHOUT diagnositics enabled works.
Problem with that: Trying to activate WAD diagnostics logging after publishing using the Azure cmdlets also fails WiTH a similar error message. Following http://blogs.msdn.com/b/kwill/archive/2014/12/02/windows-azure-diagnostics-upgrading-from-azure-sdk-2-4-to-azure-sdk-2-5.aspx I
tried:
PS C:\> Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -DiagnosticsConfigurationPath $public_config -ServiceName $service_name -Slot 'Staging' -Role $role_name
VERBOSE: Setting PaaSDiagnostics configuration for MyWebRole.
Set-AzureServiceDiagnosticsExtension : BadRequest : Published Asset Entry for Image
Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml not found.
At line:1 char:1
+ Set-AzureServiceDiagnosticsExtension -StorageContext $storageContext -Diagnostic ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Set-AzureServiceDiagnosticsExtension], CloudException
+ FullyQualifiedErrorId : Microsoft.WindowsAzure.CloudException,Microsoft.WindowsAzure.Commands.ServiceManagement.
Extensions.SetAzureServiceDiagnosticsExtensionCommand
The problem seems to be related to those service configuration parts in the cloud which are not replaced by a new deployment, so I compared both services using Azure cmdlet Get-AzureService.
I found that the new service has properties which the old one is missing:
ExtendedProperties : {[ResourceGroup, myazureservice], [ResourceLocation, North Europe]}
Is this a hint? Reinstalling or repairing Visual Studio is not the answer to this problem!!!
What's the meaning of "Published Asset Entry for Image Microsoft.Azure.Diagnostics_PaaSDiagnostics_europeall_manifest.xml"?
[Perhaps MS will publish a newer version of its Azure cmdlets, but that's not today's story]
So what are possible reasons or fixes for this behaviour? Going back to log4net is not my favorite. Even worse, while there are alternative logging solution,
I currently have no performance counter monitoring in the Azure portal (Remote desktop and perfmon is NO solution). Is there any alternative to going back to SDK2.4?
Best regards,
Andreas

Hi Andreas,
Thanks for your feedback.
I will test and reproduce your issue on my side. Any information, I will post back for you.
Thanks for your understanding.
Regards,
Will
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

BlazeDS configuration with coldfusion/java No destination 'testClass' exists in service flex.messaging.services.RemotingService"

Hi
I have an application which requires interaction with both coldfusion and java.I have taken the configuration files from the blazeDS turnkey project and added it to my application.My application server is coldfusion deployed in a weblogic.I was able to call coldfusion from my flex but whenever i try making java calls i get the following error
[RPC Fault faultString="No destination 'testClass' exists in service flex.messaging.services.RemotingService" faultCode="Server.Processing" faultDetail="null"]
services-config file is as follows
<?xml version="1.0" encoding="UTF-8"?>
<services-config>
 <services>
 <service-include file-path="remoting-config.xml" />
 
 </services>
 <security>
 <login-command class="flex.messaging.security.JRunLoginCommand" server="JRun"/>
 
 
 </security>
 <channels>
 
 <channel-definition id="my-cfamf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://localhost:7002/flex2gateway/" class="flex.messaging.endpoints.AMFEndpoint"/>
 <properties>
 <polling-enabled>false</polling-enabled>
 <serialization>
 <instantiate-types>false</instantiate-types>
 </serialization>
 </properties>
 </channel-definition>
 <channel-definition id="cf-polling-amf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/cfamfpolling" class="flex.messaging.endpoints.AMFEndpoint"/>
 <properties>
 <polling-enabled>true</polling-enabled>
 <polling-interval-seconds>8</polling-interval-seconds>
 <serialization>
 <instantiate-types>false</instantiate-types>
 </serialization>
 </properties>
 </channel-definition>
 <channel-definition id="my-cfamf-secure" class="mx.messaging.channels.SecureAMFChannel">
 <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/cfamfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>
 <properties>
 <polling-enabled>false</polling-enabled>
 <serialization>
 <instantiate-types>false</instantiate-types>
 </serialization>
 </properties>
 </channel-definition>
 
 <channel-definition id="java-amf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://localhost:7002/flex2gateway/amf" class="flex.messaging.endpoints.AMFEndpoint"/>
 </channel-definition>
 <channel-definition id="java-secure-amf" class="mx.messaging.channels.SecureAMFChannel">
 <endpoint uri="https://{server.name}:{server.port}{context.root}/flex2gateway/amfsecure" class="flex.messaging.endpoints.SecureAMFEndpoint"/>
 </channel-definition>
 <channel-definition id="java-polling-amf" class="mx.messaging.channels.AMFChannel">
 <endpoint uri="http://{server.name}:{server.port}{context.root}/flex2gateway/amfpolling" class="flex.messaging.endpoints.AMFEndpoint"/>
 <properties>
 <polling-enabled>true</polling-enabled>
 <polling-interval-seconds>8</polling-interval-seconds>
 </properties>
 </channel-definition>
 
 </channels>
 <logging>
 <target class="flex.messaging.log.ConsoleTarget" level="Error">
 <properties>
 <prefix>[BlazeDS] </prefix>
 <includeDate>false</includeDate>
 <includeTime>false</includeTime>
 <includeLevel>false</includeLevel>
 <includeCategory>false</includeCategory>
 </properties>
 <filters>
 <pattern>Endpoint.*</pattern>
 <pattern>Service.*</pattern>
 <pattern>Configuration</pattern>
 <pattern>Message.*</pattern>
 </filters>
 </target>
 </logging>
 <system>
 
 
 </system>
</services-config>
remote-config.xml
<?xml version="1.0" encoding="UTF-8"?>
<service id="remoting-service"
 class="flex.messaging.services.RemotingService"
 messageTypes="flex.messaging.messages.RemotingMessage">
 <adapters>
 <adapter-definition id="cf-object" class="coldfusion.flash.messaging.ColdFusionAdapter" default="true"/>
 <adapter-definition id="java-object" class="flex.messaging.services.remoting.adapters.JavaAdapter"/>
 </adapters>
 <default-channels>
 <channel ref="my-cfamf"/>
 </default-channels>
 <destination id="ColdFusion">
 <channels>
 <channel ref="my-cfamf"/>
 </channels>
 <properties>
 <source>*</source>
 
 <access>
 
 <use-mappings>false</use-mappings>
 
 <method-access-level>remote</method-access-level>
 </access>
 <property-case>
 
 <force-cfc-lowercase>false</force-cfc-lowercase>
 
 <force-query-lowercase>false</force-query-lowercase>
 
 <force-struct-lowercase>false</force-struct-lowercase>
 </property-case>
 </properties>
 </destination>
<destination id="testClass">
 <properties>
 <source>TestClass</source>
 </properties>
<adapter ref="java-object" />
 <channels>
 <channel ref="java-amf"/>
 </channels>
 </destination>
 <destination id="testClass2">
 <properties>
 <source>TestClass2</source>
 </properties>
<adapter ref="java-object"/>
 <channels>
 <channel ref="java-amf"/>
 </channels>
 </destination>
</service>
Can anyone please tell me where i m going wrong.Is that because i m using flex2gateway for java calls?.I used it since it was how it has been configured in the turnkey project for coldfusion.I have replicated the file as it was there and since it is using flex2gateway even for javaEndpoints i felt we could use the same.
regards
Sidd

Thanks for the reply. Yes, I did compile all the Java and it
works OK with a simple Java program. It just will not work in a
Flex application.
The java classes are:
RRA:
package blah.myPackage;
import java.util.List;
import java.util.Collection;
import flex.data.DataSyncException;
import flex.data.assemblers.AbstractAssembler;
class RRA extends AbstractAssembler
public Collection fill( List fillParameters )
RRS service = new RRS();
return service.getSome();
RRS:
package blah.myPackage;
import java.util.ArrayList;
import java.util.List;
import java.sql.*;
import flex.EORS.*;
class RRS
public List getSome()
ArrayList list = new ArrayList();
String str = "bob";
RR rr = new RR(str);
list.add(rr);
return list;
RR:
package blah.myPackage;
class RR
private String name;
public RR() { }
public RR(String name)
this.name = name;
public String getName()
return this.name;
public void setName(String name)
this.name = name;
I started with something that retrieved data from a database
but watered it down just to try and get some kind of communication
between Flex and Java.

PI Szenarion with an existing Enterprise Service

Similar Messages

Maybe you are looking for