PI volumes and capabilities

We are looking for some sort of answer to the following question.
1. Is there a measurement of the amount of interfaces (number of calls, size of messages per some timeframe) that we should be able to handle in the server which has 16GB Mem and 8 CPU?
2. Is there a material difference in the amount of resources consumed/needed for web service calls to ECCu2019s SOAP run-time versus direct RFC calls or IDOCs via ALE?

Vijay,
Check the Java heap size when message is processing,
>handle in the server which has 16GB Mem and 8 CPU?
I have tried passing more than 100 MB file, which has cross reference
>Is there a material difference in the amount of resources consumed/needed for web service calls to ECCu2019s SOAP run-time versus direct RFC calls or IDOCs via ALE?
It is depends upon your business requirement, We can use RFC for Sync, To trigger BAPI etc, IDOC to post the Std IDOC Asyn process, ALE to post the master data ..like that each has it's own advantage
Cheers
Agasthuri

Similar Messages

I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

THE SHORTER STORY
My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
What is the best configuration or set-up to accomplish my above goals?
Thank you in advance for your assistance!!!
THE FULL STORY
I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
(1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
(2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
(3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
(4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
(5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
(6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
Modem
Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
Existing Laptops on the Wireless Network Requiring Time Machine Backups
MacBook Air (11-inch, Mid 2012) OS X 10.8.2
MacBook Pro (13-inch Mid 2010) OS X 10.8.2
Other Existing Apple Products (Clients) on the Wireless Network
iPod Touch (second generation) is model A1288.
iPad (1st generation)
Apple TV (3rd generation) - Quantity two (2)

Thanks Bob Timmons.
In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
Create a wireless network
Extend a wireless network
Off
Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
DHCP and Nat
DHCP Only
Off (Bridge Mode)
Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
Extenders / Repeaters / Wirelessly Extending the Wireless Network
I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
So what is left? Do you have a Plan B for me? Thanks in advance for your help!

Disk Utilty - what is difference between single volume and single partition

In Disk Utility I can, should I wish, format a drive by using Erase to create a single volume. Also in Disk Utility, I have the option to use Partition to create one (or more) partition.
What is the difference between a volume and a single partition?
What are their relative merits?
In what circumstances would I want to create a single partition instead of a volume?
Disk Utility also prompts me to name the volume or partition. From experience, what would you suggest as a suitable name and where is this information subsequently used?

A "volume" or "partition" are the same thing. The subject of using partitions has been covered many times on the forums. Do some searching and you'll find quite a lot of information. Also try doing some Google searching.

There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.   Time: 30/05/2014 1:16:20 AM

Recently, our mail server crashed at about 7pm one night, with the error 'There is no more space for virtual disk ServerName_2.vmdk. You might be able to continue this session by freeing disk space on the relevant volume, and clicking Retry. Click Cancel to terminate this session.'
When we click Retry, the server starts up OK.
There are no snapshots listed in Snapshot manager for any of the virtual machines on the host.
There is also free disk space available on the host and for the VM with the disk errors.
This happened at least three more times, often at bad times. Each time, we were able to click 'Retry' and the disk/system would allow the VM to start-up successfully.
I checked the Forums, the VMware support articles and the internet as I had not seen this problem before. I have completed the VSphere 5.1 - Fast Track course and this issue was NOT covered in the training.
Most of the advice on-line and even that on the VMware web-site was pointing to snapshots being the cause of this issue. There are no snapshots enabled and I cannot see evidence of snapshots ever being used.
- We are running VMware vsphere (5.1.0) and there are (were) 4 virtual machines running on the ESX host. We are using the free version of VMware/ESXi.
- The Hard disk types we are using for this Virtual Machine are 'Thin Provisioned'.
- There are 4 [Thin Provisioned] Hard Disks for this virtual machine.
- There are 6 CPUs
- There is 20GB of RAM (memory)
- The VM is running Windows Server 2008 R2 as the guest/VM operating system. It is an Exchange 2010 SP1 mail server. There is plenty of available disk space on all the drives. The [Exchange] log files are cleaned out regularly (automated).
I decided to move one of our non-critical servers off this host and on to another host to see if this helped the problem. This took quite some time, as we are not using HA or vmotion, nor do we have VCenter Server...nonetheless, I finally managed to get the non-critical server on to another host (n.b. This was a much smaller machine with less virtual resources assigned to it).
After moving the non-critical server off this host, we decided to monitor the Host and see if the issue resolved itself.
I checked the host about 6-10 times a day, from first thing in the morning till last thing at night - monitoring the performance of not only the Virtual Machine, but the ESXi host also.
There were no adverse performance issues. The only thing I did note, was in the Summary page on the ESX Host, under Storage, was If I right-clicked on the datastore and clicked refresh, then the free disk space would drop (ie from 140GB to 125GB).
After monitoring the host and VM for about 2 weeks, we did NOT have another instance of the above error.
Sorry for the long winded post, but I wanted to give as much detail given this error has been raised before and snapshots are usually blamed as the cause.
My question is this:
If the ESX host had plenty of available disk capacity and there were no snapshots enabled on the VM (or any other VM's on the same host), then why did our Virtual machine crash with the error that 'there is not more space for virtual disk Servername_2.vmdk'?
How do we prevent this issue from happening if we don't know the underlying cause?
I would greatly appreciate any advice or suggestions.
If I have not provided enough info on the specs or environment, please let me know and I will provide more information.
Thanks all,
Kurt

The type of storage is really based on your requirements, and your ability to withstand downtime.
iSCSI as you are using with a NAS such as Synology or QNAP. NAS Selector - Support - Synology - Network Attached Storage (NAS)
I wouldn't use iSCSI for Exchange or any database. It's a bit slow.
Do you have a single physical host? Then I'd probably to an external direct attached storage. This would be a card inserted in your host server that gives you multilane SAS/SATA connectivity (www.techcable.com/SAS-SATA/SAS-SATA.pps) and an external disk enclosure/array.
For multiple hosts to a single array, I recommend a fibre channel connection to a FC capable switch, and on to a FC connected array.
We used to use a HP P2000 (on old G1), but it's since been retired. Worked pretty well once firmware was upgraded. http://www8.hp.com/us/en/products/disk-storage/product-detail.html?oid=4118559#!tab=features. They can be connected via iSCSI, Fibre Channel or 6GB SAS so they are flexible and reasonably priced.
Recommendations:
     Use RAID 6 with your large disk arrays. With large disks there is a measurable failure rate when rebuilding a failed RAID5 array based on MTBF.
     Use smaller 15K disks in RAID 0+1 for speed on databases/Exchange.
     Use slower 7.2K disks in RAID6 for file storage.
We are a small hospital and we have 3 VMware servers with dual CNA (FC and Ethernet in a single twinax cable) connections to 2 redundant Cisco Nexus 5K switches and then 4 Fibre Channel connections to an EMC VNX 5300. It's extremely fast with about 50 virtual servers, but was quite an investment. One thing we don't have to worry about is down time. If there ever is an equipment failure, we have redundant everything, including power split between two UPSs.
Our VNX has 3 tiers of performance. 3 100GB SSD "Fast Cache" in RAID 1 with hot spare, to keep the most used data ready, but it's not really a tier, however one could be built utilizing the same disks. A second tier is performance tier with a 8 600GB RAID 0+1 and hot spare. The third is a bunch of 7.2K 3TB disks in RAID6. The VNX autotiers, placing data on disks depending on where it's needed. The volumes are sliced and diced automatically in the background to make this happen and we never have to touch it. I used a demo of Solarwinds Storage Manager to monitor performance for a while and the utilization was always low, meaning all data access was fast, througout the day.
D

PSA: in iOS 7.1.1, alert sounds are tied to your media/game volume and not to your ringer volume

I was befuddled by this for a long time.
Alert sounds would just stop making noise. This includes dings from txt messages and new mail.
If I went to Settings>Sounds>Text Tone and select several options, all I would get were vibrations.
I rebooted the phone and toggled the silence switch on and off.
I finally figured out that if I started a game and turned the volume up, the noises would come back.
I think it is reasonable for a user to wish to play a game on mute but still hear alert messages.
I think if we can only have two separate systems for audio control, the alert sounds should be tied to the ringer, not to the media/game sounds.
When I spoke to an apple support person over online chat, they seemed to agree that this sounds like a bug.
I have seen many confused posts in these forums regarding alert sounds suddenly disappearing.
Below is the text that I submitted at http://www.apple.com/feedback/
If you share this problem, I suggest you do the same.
My case number is 606343836
Begin message:
I've had a 5S since a few weeks after launch and this problem has only come about in the last few weeks, so I suspect it has to do with a recent OS patch.
Sometimes my alert messages just stop working. They seem to work one minute, then they stop. Alert messages would include email notifications and txt message pings. When they are not working, I can go into Settings>Sounds>Text Tone, and all of the options will simply result in a vibration and no sound.
Rebooting the phone does not fix the problem.
What I have found to fix the problem is to open a game and raise the volume of the game. Then when I exit the game, alert messages start again.
This seems reversible, if I go back in and mute a game, my alert messages go away as well.
If this is by design, I do not think it should be, as I think it is reasonable for a user to want to control the "media" part of the volume separately from the "ringer" and "alerts" part of the volume. It makes sense to want play a game or video on mute but still get alert messages. If anything, I think the alerts volume should be tied to the ringer volume, I think that would make sense.

Additional info, which makes me think this is a bug rather than a feature. If you go into Settings > Sounds and turn off the "Change with Buttons" option, then the ringer should always ring at the volume of the slider on the screen.
The volume buttons now appear to only affect the media/games volume, and it works as expected EXCEPT:
if you are in a game and you mute the volume in the game, then exit the game, all alert sounds are muted and you can't turn them back up by raising the volume with the volume buttons.
If you go back into the game and raise the volume within the game, then exit the game, then alert sounds do turn back on.
I have tested this with two games from two developers.

Goods Receipt PO+VOlume and Weight Calculation

Hello experts
i have a GRPO with 10 items in lines. as far as i can see, there are missing in some of the the value for the Weight and the Volume. while checking the Item Master Data form, the volume and the weight are filled up with specific value.
could you please inform me the reason this document(GRPO) has not filled these values for specific items?
also, by clicking the Vlolume and Weight calculation, for these items the the volume is filled and the weight is not.
it is strange i suppose.
what i have found out is that in a Purchase Order, some of the items do not have a Volume or/and Weight because the BP does not have the values noticed to us and these fields are editing in item master data afterwards
By using the System information under the VIew, i can see that the VOlume and Weight Calculation gets data from INV1 table
Edited by: Fasolis Vasilios on Jan 10, 2012 10:56 AM

Hi,
The reason is simple: those value can not be copied if the Item Master was ready when you created the PO. However, PO wont automatically updated when you updated Item master. It stays in the old Item setting. That would be copied to GRPO from the old PO.
Thanks,
Gordon

" the volume for (file name) cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again."

I get an error message in iPhoto when I click on thumbnails of pictures in certain albums. It reads 'the volume for "(file name)" cannot be found. Insert the disk or connect to the server volume and wait for it to appear on the desktop, then try again.' What does this mean and how do I fix it?

It means that you imported the files in Referenced mode and have now remvoed them from the Mac. Put the disk or card back.
For more on iPhoto and file management see this User Tip:
https://discussions.apple.com/docs/DOC-6361

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.

AFP fails to connect to a PC volume and gives a "version of the server you are trying to connect to is not supported" error message.
Has anybody come across this error and found a fool-proof solution? I have found some stuff on the web but nothing seems to work. In particular this one on the Apple Help doesn't:
http://support.apple.com/kb/HT4700
I have a W2K3 server where the volume is. It's a new Mac with OSX 10.8 and is connecting with AFP (I don’t want to move to SMB yet). There are older Macs with lower OS and all of them work fine. I have checked all the basic stuff and it is set-up correctly (hosts file on Mac, network, etc.).
Any help greatly appreciated,
Cheers,
Ian

This may work for you:
http://www.zdnet.com/mavericks-smb2-problem-and-fixes-7000022519/

Volume and FF keys do not work on wireless keyboard

I replaced a wireless keyboard for my iMac today, and just noticed tonight that when I try to adjust the volume UP, it sends me to widgets, and when I try to adjust the volume DOWN, it dims the desktop behind my open window.
I've tried checking, and unchecking, the box in Preferences>Keyboard>Use all F1, F2, etc. as standard function keys. I've also gone to keyboard shortcuts and disabled F7 to F12. But no volume or rewind/ff etc.
How do I get my volume and rw/ff keys back? Thanks!

Also, I have attempted to submit a repair claim online as I have the Apple Care for the iMac but when I go to enter the Hardware Serial Number of the Keyboard in the Wireless Keyboard repair section, it does not recognize it.
Dustin,
Welcome to Apple Discussions.
I would recommend entering the computer's serial number not the keyboards. You can locate the computer by clicking the  in the upper left corner of your screen, clicking About this Mac, and where it states the Version click 2x until the serial number appears.
Regards,
Roger

Format External Drive for HFS+ volume and FAT32 volume with Disk Utility

I just bought a Seagate 1tb external drive from OWC and I want to partition it into a HFS+ (journaled I assume) volume and a NTFS volume. Objective: To manually backup critical folders from my wife’s Dell (running XP) to the NTFS volume and critical Mac folders from my PowerBookG4 to the HFS volume.
My plan was to have my Mac (10.4.11) do the partitioning into a 350gb FAT32 volume for Windows and a 650gb HFS+ volume for Mac – then take the external drive to the Dell and have the Dell reformat the 350gb FAT drive to NTFS.
First question – Is this possible overall?
Second question – I haven’t been able to get my Disk Utility on my Mac to do the initial partitioning into one HFS volume and one FAT32 volume the way I want it. Is this step possible?
I’m happy to be more specific about the steps I’ve taken if the basic plan is good. From what I’ve found in some forums so far, I think I’m on the right track but am unable to execute it. Thank you.

Thank you Limnos for all your help. Last night I tried again and it worked! I’ not totally sure on what I did right but:
• Both volumes on the new ext. driver were HFS (from my last attempt the other day) so I looked into a simple erase of one partition/volume into a different format, but DU did not offer a way of erasing it into MS-DOS(FAT32). But I think I did a simple HFS erase anyway of the volume I wanted to format to FAT32. There was nothing “in” that volume because this was a new external drive but I figured it could not hurt anything.
• So then, I think I went back to Partition, locked the partition/volume that I wanted to keep in HFS+ for my Mac files, and (re)partitioned the other just erased volume to MS-DOS. I think I did it under the MBR option.
• It worked! Not sure why but my Mac recognized both volumes one as HFS, the other as FAT32. Maybe someone will find this useful some day!!
• Then, I hooked up the drive to my work Dell, the Dell found only the FAT32 drive (as expected), and I executed a short simple easy command I found on ehow.com (search for ‘convert FAT32 to NTFS’) to make that volume NTFS.
Thanks again Limnos and everyone else!

Firefox 5 has lost all my chrome tab's and capabilities which came with 4? how do I un install 5 and get back to my version 4?

firefox 5 has lost all my chrome tab's and capabilities which came with FF4? how do I un install 5 and get back to my version 4 & retain all my bookmarks at least I's also like to retrieve my Chrome capabilities as well?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

Difference between ASM Disk Group, ADVM Volume and ACFS File system

Q1. What is the difference between an ASM Disk Group and an ADVM Volume ?
To my mind, an ASM Disk Group is effectively a logical volume for Database files ( including FRA files ).
11gR2 seems to have introduced the concepts of ADVM volumes and ACFS File Systems.
An 11gR2 ASM Disk Group can contain :
ASM Disks
ADVM volumes
ACFS file systems
Q2. ADVM volumes appear to be dynamic volumes.
However is this therefore not effectively layering a logical volume ( the ADVM volume ) beneath an ASM Disk Group ( conceptually a logical volume as well ) ?
Worse still if you have left ASM Disk Group Redundancy to the hardware RAID / SAN level ( as Oracle recommend ), you could effectively have 3 layers of logical disk ? ( ASM on top of ADVM on top of RAID/SAN ) ?
Q3. if it is 2 layers of logical disk ( i.e. ASM on top of ADVM ), what makes this better than 2 layers using a 3rd party volume manager ( eg ASM on top of 3rd party LVM ) - something Oracle encourages against ?
Q4. ACFS File systems, seem to be clustered file systems for non database files including ORACLE_HOMEs, application exe's etc ( but NOT GRID_HOME, OS root, OCR's or Voting disks )
Can you create / modify ACFS file systems using ASM.
The oracle toplogy diagram for ASM in the 11gR2 ASM Admin guide, shows ACFS as part of ASM. I am not sure from this if ACFS is part of ASM or ASM sits on top of ACFS ?
Q5. Connected to Q4. there seems to be a number of different ways, ACFS file systems can be created ? Which of the below are valid methods ?
through ASM ?
through native OS file system creation ?
through OEM ?
through acfsutil ?
my head is exploding
Any help and clarification greatly appreciated
Jim

Q1 - ADVM volume is a type of special file created in the ASM DG. Once created, it creates a block device on the OS itself that can be used just like any other block device. http://docs.oracle.com/cd/E16655_01/server.121/e17612/asmfilesystem.htm#OSTMG30000
Q2 - the asm disk group is a disk group, not really a logical volume. It combines attributes of both when used for database purposes, as the database and certain other applications know how to talk "ASM" protocol. However, you won't find any general purpose applications that can do so. In addition, some customers prefer to deal directly with file systems and volume devices, which ADVM is made to do. In your way of thinking, you could have 3 layers of logical disk, but each of them provides different attributes and characteristics. This is not a bad thing though, as each has a slightly different focus - os file system\device, database specific, and storage centric.
Q3 - ADVM is specifically developed to extend the characteristics of ASM for use by general OS applications. It understands the database performance characteristics and is tuned to work well in that situation. Because it is developed in house, it takes advantage of the ASM design model. Additionally, rather than having to contact multiple vendors for support, your support is limited to calling Oracle, a one-stop shop.
Q4 - You can create and modify ACFS file systems using command line tools and ASMCA. Creating and modifying logical volumes happens through SQL(ASM), asmcmd, and ASMCA. EM can also be used for both items. ACFS sits on top of ADVM, which is a file in an ASM disk group. ACFS is aware of the characteristics of ASM\ADVM volumes, and tunes it's IO to make best use of those characteristics.
Q5 - several ways:
1) Connect to ASM with SQL, use 'alter diskgroup add volume' as Mihael points out. This creates an ADVM volume. Then, format the volume using 'mkfs' (*nix) or acfsformat (windows).
2) Use ASMCA - A gui to create a volume and format a file system. Probably the easiest if your head is exploding.
3) Use 'asmcmd' to create a volume, and 'mkfs' to format the ACFS file system.
Here is information on ASMCA, with examples:
http://docs.oracle.com/cd/E16655_01/server.121/e17612/asmca_acfs.htm#OSTMG94348
Information on command line tools, with examples:
Basic Steps to Manage Oracle ACFS Systems

Volume and mute buttons do not work. no ringtone

Volume and Mute buttons do not work. Ringtones and alerts all silent. Sound working for music etc...

Sounds like you have a speaker fault and the phone would normally require servicing. But seeing as you have had the screen replaced, you will not be able to do this via the Genius Bar.
You will probably need to go back to the place where you got the screen replaced and ask them to look at the speaker for you.

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

Hi! I have the same problem when I use my headphones .
iPhone 4s England, iOS 6.1.2

Z10 Volume and Notification Issue

Hi,
I am facing frequent no volume and notification issue on my Z10. once i restart the phone it is getting resolved but this is really irritating as i have to do this restart process atleast 10 to 15 times a day as the problem is occuring frequently. definitely it is a software issue not an hardware issue please help me in resolving the bug...
Model: BlackBerry Z10
Model No: STL100- 1
Current Device Software Version: 10.0.10.82

Hey manikandanb4u,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
We are aware of this issue, a KB article was created about the issue: www.blackberry.com/btsc/KB33694
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

PI volumes and capabilities

Similar Messages

Maybe you are looking for