PI7.0 Instalation on Linux box

Hi all,
I want to install SAP PI7.0 on LINUX box. Can anyone direct me what are the steps need to do PI7.0 instalation
Thanks&Regards,
venkatk

Hi Venkat,
You have to the following :
Post installation steps of installation guide
SLD Post installation guide
Config guide XI 3.0 SP18
I think in XI 7.0 you can run a template and it will do most of the post processing. And creating connection to SLD, like LCRSAPRFC and SAPSLDAPI, and all those steps are pretty much same.
u can check this link:
http://help.sap.com/saphelp_nw2004s/helpdata/en/14/39084136b5f423e10000000a155106/frameset.htm
Reward points if this helps
Regards
Vani.

Similar Messages

Error while installing Java using jrockit on my Linux box

I am trying to install java 1.6 using jrockit software in my 64-bit linux box, but I am getting errors:
-bash-4.1$ ./jrockit-jdk1.6.0_45-R28.2.7-4.1.0-linux-x64.bin
Extracting 0%....................................................................................................100%
[JRockit] ERROR: The JVM has crashed. Writing crash information to /tmp/file06vBOV/jrockit.17485.dump.
===== BEGIN DUMP =============================================================
JRockit dump produced after 0 days, 00:00:07 on Wed Apr 17 01:33:22 2013
* If you see this dump, please go to *
* http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html *
* for troubleshooting information. *
Additional information is available in:
/tmp/file06vBOV/jrockit.17485.dump
No snapshot file (core dump) will be created because core dumps have been
disabled. To enable core dumping, try "ulimit -c unlimited"
before starting JRockit again.
Error Message: Unhandled native exception [85]
Signal info : si_signo=4, si_code=2 si_addr=0x30c5814be0
Version : Oracle JRockit(R) R28.2.7-7-155314-1.6.0_45-20130329-0641-linux-x86_64
CPU : Intel SSE SSE2 SSE3 SSSE3 SSE4.1 SSE4.2 Intel64
Number CPUs : 4
Tot Phys Mem : 16399638528 (15639 MB)
OS version : Red Hat Enterprise Linux Server release 6.2 (Santiago)
Linux version 2.6.39-100.5.1.el6uek.x86_64 ([email protected]) (gcc version 4.4.6 20110731 (Red Hat 4.4.6-3) (GCC) ) #1 SMP Tue Mar 6 20:26:00 EST 2012 (x86_64)
Hypervisor : Xen v3.4
Thread System: Linux NPTL
LibC release : 2.12-stable
Java locking : Lazy unlocking enabled (class banning) (transfer banning)
State : JVM is running
Command Line : -Djava.io.tmpdir=/tmp -Dbea.installer.launcher.home=/slot/ems8308/oracle/endeca3.0/endeca-server -Xmx256m -Dsun.java.command=com.bea.plateng.wizard.WizardController -mode=gui -Dsun.java.launcher=SUN_STANDARD com.bea.plateng.wizard.WizardController -mode=gui
Repository :
java.home : /tmp/file06vBOV/jre160_45
j.class.path : .:installer.jar:customtasks.jar:bids.jar:3rdparty.jar:jsr173_api.jar:wlw-plaf.jar:comdev.jar:wizard.jar:com.bea.cie.oui_1.1.0.0.jar:com.bea.core.xml.xmlbeans_2.2.0.0.jar
j.lib.path : /usr/java/packages/lib/amd64:/tmp/file06vBOV/jre160_45/lib/amd64/jrockit:/tmp/file06vBOV/jre160_45/lib/amd64:/tmp/file06vBOV/jre160_45/../lib/amd64
JAVA_HOME : <not set>
JAVAOPTIONS: <not set>
LD_LIBRARY_PATH: /tmp/file06vBOV/jre160_45/lib/amd64/jrockit:/tmp/file06vBOV/jre160_45/lib/amd64:/tmp/file06vBOV/jre160_45/../lib/amd64
LD_ASSUME_KERNEL: <not set>
LD_PRELOAD : <not set>
StackOverFlow: 0 StackOverFlowErrors have occured
OutOfMemory : 0 OutOfMemoryErrors have occured
C Heap : Good; no memory allocations have failed
GC Strategy : Mode: throughput, with strategy: genparpar (basic strategy: genparpar)
GC Status : OC is not running. Last finished OC was OC#0.
: YC is not running. Last finished YC was YC#0.
YC History : Ran 0 YCs since last OC.
Heap : 0xf0000000 - 0xf4000000 (Size: 64 MB)
Compaction : (no compaction area)
Allocation : TLA-min: 2048, TLA-preferred: 32768 TLA-waste limit: 2048
NurseryList : 0xf0000000 - 0xf2000000
KeepArea : 0xf17fffe8 - 0xf2000000
KA Markers : [ 0xf0fffff0, 0xf17fffe8 , 0xf2000000 ]
Forbidden A : (none)
Previous KA : (none)
Previous FA : (none)
CompRefs : References are compressed, with heap base 0x0 and shift 0.
Registers (from ThreadContext: 0x7fdf142e34c0:
rax = 0000000000000001 rcx = 0000000017bee3ff
rdx = 00000000bfebfbff rbx = 00007fdf10d7eb20
rsp = 00007fdf142e3928 rbp = 00007fdf142e3a70
rsi = 0000000000000000 rdi = 0000000000000058
r8 = 0000000000000000 r9 = 0000000000000000
r10 = 00007fdf142e38a0 r11 = 00007fdf10d7eb20
r12 = 00007fdf142e3a98 r13 = 00007fdf10e049b0
r14 = 0000000000000000 r15 = 0000000000000000
cs = 0000000000000033 fs = 0000000000000000
gs = 0000000000000000
rip = 00000030c5814be0 flags = 0000000000010202
Loaded modules:
(* denotes the module where the exception occured)
0000000000400000-00000000004128c3 /tmp/file06vBOV/jre160_45/bin/java
00007fff26fff000-00007fff26fffa7c /tmp/file06vBOV/jre160_45/bin/java
00000030c6400000-00000030c6401fef /lib64/libdl.so.2
00000030c6800000-00000030c6816b37 /lib64/libpthread.so.0
00000030c6000000-00000030c6196c1f /lib64/libc.so.6
00000030c5800000-00000030c581f13f */lib64/ld-linux-x86-64.so.2
00007fdf18b70000-00007fdf18e780e3 /tmp/file06vBOV/jre160_45/lib/amd64/jrockit/libjvm.so
00007fdf1894e000-00007fdf1896d21b /tmp/file06vBOV/jre160_45/lib/amd64/libjrosal.so
00007fdf18741000-00007fdf1874d553 /tmp/file06vBOV/jre160_45/lib/amd64/libjrutil.so
00000030c6c00000-00000030c6c824e7 /lib64/libm.so.6
00000030c7400000-00000030c740680b /lib64/librt.so.1
00007fdf17c30000-00007fdf17c3c483 /tmp/file06vBOV/jre160_45/lib/amd64/libjfr.so
00007fdf1718e000-00007fdf1719a317 /tmp/file06vBOV/jre160_45/lib/amd64/libverify.so
00007fdf1705f000-00007fdf17087283 /tmp/file06vBOV/jre160_45/lib/amd64/libjava.so
00000030d8600000-00000030d8615ceb /lib64/libnsl.so.1
00007fdf16ed4000-00007fdf16eda5bf /tmp/file06vBOV/jre160_45/lib/amd64/native_threads/libhpi.so
00007fdf16673000-00007fdf16680c03 /tmp/file06vBOV/jre160_45/lib/amd64/libzip.so
00007fdf16055000-00007fdf160e7683 /tmp/file06vBOV/jre160_45/lib/amd64/libawt.so
00007fdf15f07000-00007fdf15f4828b /tmp/file06vBOV/jre160_45/lib/amd64/xawt/libmawt.so
00000030c9400000-00000030c9410d8b /usr/lib64/libXext.so.6
00000030c8400000-00000030c8538423 /usr/lib64/libX11.so.6
00000030d5400000-00000030d5404dbb /usr/lib64/libXtst.so.6
00000030cac00000-00000030cac0e243 /usr/lib64/libXi.so.6
00000030c8c00000-00000030c8c1a123 /usr/lib64/libxcb.so.1
00000030c8800000-00000030c8801dd3 /usr/lib64/libXau.so.6
00007fdf15c14000-00007fdf15ca7fcf /tmp/file06vBOV/jre160_45/lib/amd64/libfontmanager.so
00007fdf159bb000-00007fdf159cdca7 /tmp/file06vBOV/jre160_45/lib/amd64/libnet.so
00007fdf149b3000-00007fdf149b99a3 /tmp/file06vBOV/jre160_45/lib/amd64/libnio.so
00007fdf147ac000-00007fdf147b1f9b /tmp/file06vBOV/jre160_45/lib/amd64/liborii.so
00000030cb800000-00000030cb808d13 /usr/lib64/libXcursor.so.1
00000030ca800000-00000030ca808cfb /usr/lib64/libXrender.so.1
00000030cbc00000-00000030cbc0497b /usr/lib64/libXfixes.so.3
00007fdeb2015000-00007fdeb206084b /tmp/file06vBOV/jre160_45/lib/amd64/libcmm.so
00007fdeb0e44000-00007fdeb0e55d5b /tmp/file06vBOV/libjni.so
Stack:
(* marks the word pointed to by the stack pointer)
00007fdf142e3928: 00000030c580aad8* 0000000000000000 0000000000000000 00007fdf00000005
00007fdf142e3948: 0000000000000000 00007fdf00000001 00007fdf10e049b0 0000000000000000
00007fdf142e3968: 00007fdf00000000 0000000000000000 0000000000000058 0000000000000004
00007fdf142e3988: 00007fdf10e04d08 0000000000000013 00007fdf142e3a40 00007fdf0000000a
00007fdf142e39a8: 00000001142e3aa0 00007fdf146d6b18 00007fdf15c15ff1 00007fdf142e3a30
00007fdf142e39c8: 00000030c6078edf 00007fdf160585c8 00007fdf10d744e0 00007fdf146d6b18
Code:
(* marks the word pointed to by the instruction pointer)
00000030c5814b80: 8b48ffff8c0ae820 0f0824548b482404 244c280f10244428 246cdb40246cdb20
00000030c5814ba0: 241c8b48dc894830 001f0fc330c48348 75000020c3c13d83 000001b8db894925
00000030c5814bc0: 01b8db894ca20f00 000000c1f7000000 9d0589d8f7027510 517800f8830020c3
00000030c5814be0: 008025047ffdc564* 250c7ffdc5640000 7ffdc564000000a0 c564000000c02514
00000030c5814c00: 000000e0251c7ffd 010025247ffdc564 252c7ffdc5640000 7ffdc56400000120
00000030c5814c20: c564000001402534 00000160253c7ffd 8025047f0f6664c3 0c7f0f6664000000
Last optimized methods:
No methods optimized.
Thread:
"AWT-EventQueue-0" id=17 idx=0x4c tid=17508 lastJavaFrame=0x7fdf142e3b88
Stack 0: start=0x7fdf142a4000, end=0x7fdf142e6000, guards=0x7fdf142a9000 (ok), forbidden=0x7fdf142a7000
Thread Stack Trace:
at dlx86_64_save_sse+48()@0x30c5814be0
at dlfixup+223()@0x30c580df40
-- Java stack --
at sun/font/X11TextRenderer.doDrawGlyphList(JJLsun/java2d/pipe/Region;Lsun/font/GlyphList;)V(Native Method)
at sun/font/X11TextRenderer.drawGlyphList(X11TextRenderer.java:62)
at sun/java2d/pipe/GlyphListPipe.drawString(GlyphListPipe.java:54)
at sun/java2d/SunGraphics2D.drawString(SunGraphics2D.java:2772)
at sun/swing/SwingUtilities2.drawString(SwingUtilities2.java:510)
at sun/swing/SwingUtilities2.drawStringUnderlineCharAt(SwingUtilities2.java:531)
at javax/swing/plaf/basic/BasicGraphicsUtils.drawStringUnderlineCharAt(BasicGraphicsUtils.java:229)
at workshop/core/plaf/JbButtonUI.paintText(JbButtonUI.java:676)
at workshop/core/plaf/JbButtonUI.paint(JbButtonUI.java:600)
at javax/swing/plaf/ComponentUI.update(ComponentUI.java:143)
at javax/swing/JComponent.paintComponent(JComponent.java:760)
at javax/swing/JComponent.paint(JComponent.java:1037)
at javax/swing/JComponent.paintChildren(JComponent.java:870)
at javax/swing/JComponent.paint(JComponent.java:1046)
at javax/swing/JComponent.paintChildren(JComponent.java:870)
at javax/swing/JComponent.paint(JComponent.java:1046)
at javax/swing/JComponent.paintChildren(JComponent.java:870)
at javax/swing/JComponent.paint(JComponent.java:1046)
at javax/swing/JComponent.paintChildren(JComponent.java:870)
at javax/swing/JComponent.paint(JComponent.java:1046)
at javax/swing/JLayeredPane.paint(JLayeredPane.java:567)
at javax/swing/JComponent.paintChildren(JComponent.java:870)
at javax/swing/JComponent.paint(JComponent.java:1046)
at javax/swing/JComponent.paintToOffscreen(JComponent.java:5132)
at javax/swing/BufferStrategyPaintManager.paint(BufferStrategyPaintManager.java:278)
at javax/swing/RepaintManager.paint(RepaintManager.java:1257)
at javax/swing/JComponent._paintImmediately(JComponent.java:5080)
at javax/swing/JComponent.paintImmediately(JComponent.java:4890)
at javax/swing/RepaintManager$3.run(RepaintManager.java:814)
at javax/swing/RepaintManager$3.run(RepaintManager.java:802)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:232)
at java/security/AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at javax/swing/RepaintManager.paintDirtyRegions(RepaintManager.java:802)
at javax/swing/RepaintManager.paintDirtyRegions(RepaintManager.java:745)
at javax/swing/RepaintManager.prePaintDirtyRegions(RepaintManager.java:725)
at javax/swing/RepaintManager.access$1000(RepaintManager.java:46)
at javax/swing/RepaintManager$ProcessingRunnable.run(RepaintManager.java:1668)
at java/awt/event/InvocationEvent.dispatch(InvocationEvent.java:209)
at java/awt/EventQueue.dispatchEventImpl(EventQueue.java:672)
at java/awt/EventQueue.access$400(EventQueue.java:81)
at java/awt/EventQueue$2.run(EventQueue.java:633)
at java/awt/EventQueue$2.run(EventQueue.java:631)
at jrockit/vm/AccessController.doPrivileged(AccessController.java:232)
at java/security/AccessControlContext$1.doIntersectionPrivilege(AccessControlContext.java:87)
at java/awt/EventQueue.dispatchEvent(EventQueue.java:642)
at java/awt/EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java/awt/EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java/awt/EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java/awt/EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java/awt/EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java/awt/EventDispatchThread.run(EventDispatchThread.java:122)
at jrockit/vm/RNI.c2java(JJJJJ)V(Native Method)
-- end of trace
Memory usage report:
Total mapped 3004488KB (reserved=2700572KB)
- Java heap 262144KB (reserved=196608KB)
- GC tables 8780KB
- Thread stacks 13212KB (#threads=20)
- Compiled code 1048576KB (used=2746KB)
- Internal 1352KB
- OS 174888KB
- Other 1477872KB
- Classblocks 1024KB (malloced=946KB #2264)
Not tracing sites.
- Java class data 15616KB (malloced=15591KB #10424 in 2264 classes)
Not tracing sites.
- Native memory tracking 1024KB (malloced=174KB #10)
Not tracing sites.
Set the env variable TRACE_ALLOC_SITES=1 or use the print_memusage switch
trace_alloc_sites=true to enable alloc site tracing.
* If you see this dump, please go to *
* http://download.oracle.com/docs/cd/E15289_01/go2troubleshooting.html *
* for troubleshooting information. *
===== END DUMP ===============================================================
** Error during execution, error code = 134.
Please help me how to solve this issue.

I suggest trying to install a different version to confirm the error. Do you have SELinux enabled? It can cause weird errors. You can check the syslog /var/adm/messages to see if there were any SELinux errors.
The following is known to work:
Oracle Linux with jrockit
Oracle Linux with jrockit

Need help - install OBIEE in Linux box

i need a document for OBIEE 11gr1 installation document
i already downloaded the document from oracle website ...i need except that any useful blogs links and URL to install
OBIEE 11R1 in Linux box(OEL4U5)

hi saichand,
Already i have posted my issue in this forum( OUI Seesion failed - OBIEE installation ---- Sep 13, 2010 9:33 PM Last Post By: HMS) before one week.
but i didn't get the reply to solve that issue. thats why i m posting a new thread for OBIEE installation document
and links, to solve the installation errors myself.
kindly share your ideas to solve the OBIEE installation error which i was posted earlier.
thanks...
Edited by: HMS on Sep 13, 2010 9:58 PM
Edited by: HMS on Sep 13, 2010 10:00 PM

Problem in installing Agent10 on Linux box

Hi,
I have tryed to install Agent10g on a linux box abd tryed to connect it to the OMS running on Windows XP. I choose the installation option agentDeploy option by running agentDownload.linux it worked fine by downloading all the files and used the silent installation option to install the Agent by running the command
/u02/downloads/agentDownload10.2.0.2.0Oui/Disk1/runInstaller -ignoreSysPrereqs -waitforcompletion -force -responseFile /u02/downloads/agentDownload10.2.0.2.0Oui/agent_download.rsp -silent b_doDiscovery=TRUE b_startAgent=TRUE -sourceLoc http://ayz.xyz.com:4889/agent_download/10.2.0.2.0/linux/agent/stage/products.xml FROM_LOCATION=http://ayz.xyz.com:4889/agent_download/10.2.0.2.0/linux/agent/stage/products.xml -baseDir /u01/app/oracle/product/ CLUSTER_NODES={}
the above command executed fine and asked me to run root.sh file as "root" I did that and installation was successful, but I could not find anything in /uo1/app/oracle/product/ folder as I supposed to see instead i see a new OracleHomes folder in /scratch/OracleHomes/agent10g. I could not find any reason for this is there anything worng with my installation and if the installation was fine how can start the agent on Linux.
PLease let me know if am missing anything.
thanks,
Ashok chava.

export ORACLE_HOME=/scratch/OracleHomes/agent10g
emctl start agent
or
/scratch/OracleHomes/agent10g/bin/emctl start agent

Required RPM'S to install ECM 11.1.1.5 on Linux box

I am trying to install oracle ECM 11.1.1.5 on linux os, before installaion i need to check RPM'S on linux box
where I can the get the required RPM'S parameter inforamation,

I believe it's a certified combination, but I didn't have great luck with Windows 2003 64-bit. Perhaps you'll have better luck with Windows 2008.
I tried doing an installation on Windows 2003 64-bit connecting to an 11.2 Oracle DB on Solaris, and had problems during the installation. The installer totally failed with the 64-bit Oracle client installed. It made better progress with the 32-bit client, but evenutally errored with a 32-bit/64-bit version mismatch when loading the library. I opened a case with Oracle support. We did several web sessions so they could observe. Ultimately they suggested that I should do the installation with the 32-bit client, wait for it to fail with the version mismatch, uninstall the 32-bit client, install the 64-bit client, and complete the installation. Seemed a bit kludgy to me, so I reverted to Windows 2003 32-bit, which worked just fine.

Installing Oracle Linux 5.8 on Virtual Box

I'm trying to install Oracle Linux 5.8 on Virtual Box. I have downloaded V31120-01 and burned to the DVD, I think successfully.
However, when I start the Virtual machine, I get the Opening screen, "Oracle Linux" the little picture of the penguin guy, etc, so I think my DVD is good.
The screen says, "To install or upgrade in graphical mode, press the <enter> key." So I do.
Several lines of text flow across the screen, but then the process seems to stop with no prompt on what to do next or any indication that an error has occurred, it just stops.
The last lines I can see are:
ACPI: bus type pci registered
PCI: Using configuration type 1
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: No dock devices found
ACPI: PCI Root Bridge [PCI0] (0000:00)
ACPI: PCI Interrupt Link [LNKA] (IRQs *5 9 10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 5 devices
usbcore: registered new driver usbfs
usbcore: registerd new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try 'pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPS0v4
NetLabel: unlabeled traffic allowed by default
ACPI: DMAR not present
PCI-GART: No AMC northbridge found.
NET: Registered protocol family 2
I'm not sure if it's waiting for some input from me, or if there is a problem, but nothing happens beyond this point until I power down the virtual machine.

There is no need to burn a DVD because Virtualbox can directly mount and boot from the .iso image you downloaded. It is usually a good idea to check the md5 checksum of your download with the number provided by the download page to verify your download is not corrupted. There are no problems installing any version of Oracle Linux under Virtualbox provided you have the right hardware. I suggest to check the Virtualbox documentation.
Note: This is not a Virtualbox forum.

Problem Installing Oracle Linux 6.3 - 'Disc not found message box'

I'm trying to install Oracle linux on a old laptop. Single disk drive.
I downloaded V33412-01Oracle Linux Release 6 Update 3 Boot iso image for x86_64 (64 bit)
burned it as an ISO image on a CD.
Inserted the CD,started the system, cd booted and the installation started.
Skipped the verify media (I verifed it during another installation try)
selected English
selected US
When prompted for installation method, I tried selecting 'LOCAL CD/DVD' since that's where my CD is at. I get a 'Disc not found message box'.
I've also tried to select the /dev/sda1, which the installation accepted, only to fail later saying it can't find the ISO image.
I also tried putting the ISO image and unzipping the contents of the file onto a USB stick and selcting this during the install - same error.
I tried putting V33413-01 onto the USB stick and selcting that - its too big to burn on a CD, that didn't work..
Any ideas here? Though this was a easy installation but I'm scratching my head as to how to continue?

Not very clearly - for me at least.
Not sure - and not sure where to find instructions on how to do this.
It mentions that you don't need the source CDs
Oracle Linux Release 6 Update 3 source DVD 1 V33413-01 3.1G
Oracle Linux Release 6 Update 3 source DVD 2 V33414-01 1.7G
Not sure what to do with these anyway.
Installation
To install Oracle Linux 6.3 from DVD media, follow the following steps:
1. Download the compressed binary DVD images
Download Oracle Linux 6.3 DVD from the Oracle Software Delivery Cloud.
You do not need to download source DVDs to install Oracle Linux.
2. Verify the downloaded media
Verify the downloaded file by comparing its sha1sum or md5sum with the published
sha1sum or md5sum.
3. Write the DVD image to DVD
Use your favorite cd burning software to write these images directly to DVD.
You should not simply copy the files onto the DVD. You must use a DVD burner
that can accept an ISO image as input, and which can create a bootable DVD
from it. To test if you have burned the images correctly, insert a burned
DVD and ensure that multiple files and directories are visible.
6. Insert the DVD, and boot
Insert the DVD into your system, boot from DVD, and follow the on-screen instructions
to deploy Oracle Linux!

While installing OBIEE on linux box

Hi,
while installing OBIEE on linux box i am getting below error
./setup.sh
Unable to load the launcher file index. Cannot open launcher file.
can any one let me know how to reslove this issue...
Regards
Venkata

Loged in with different user id.
Now i am able to install OBIEE On Linux Box..
Regards
Venkata

What privileges user should have to install and run weblogic on linux box

What privileges user should have to install and run weblogic on linux box ?

Hello.
Normal user if you don't want to listen to ip port < 1024 or write in protected directories (like /var).
Regards.

Installing BI Server & Presentation Server on 2 different Linux Boxes-OBIEE

Hi,
I am trying to install OBI EE on Red Hat Linux Boxes. I have to install BI Server on one Linux box and Presentation Server on another Linux box. Both are in the same network. I will be installing Apache web server on the machine where Presentation server resides. Please let me know how will Presentation server talk to BI server since both are going to be in different machines.
I know that I have to point the DSN in the Instanceconfig.INI file to the linux box where BI server resides. I know that I have to modify analytics.war file.
I would really appreciate if anyone can give me some direction in regards to installations.
Thanks,
Praveen

All you have to do is to modify the web.xml file in your Analytics.war file to tell it the BI Server name and port and it will work.

Is there a way to install 10G on a Linux box with less than 1G of Ram?

Hi All,
This maybe a stupid question, but I'm going to ask anyway.
I've got a Linux box with 256 Ram running CentOS. I can up it to 512, but playing with the 10G R2 Enterprise install, it complains about it not having 1G of ram needed for install. So is 1G the minium ram for Oracle 10G R2 or is there a way to install it on a box with less ram? This is not a production environment, I'm just learning and testing.
Also, what is the min ram requirements for the Express version?
Thanks,
Mike

Hi All,
This maybe a stupid question, but I'm going to
ask anyway.
I've got a Linux box with 256 Ram running CentOS. I
can up it to 512, but playing with the 10G R2
Enterprise install, it complains about it not having
1G of ram needed for install. So is 1G the minium ram
for Oracle 10G R2 or is there a way to install it on
a box with less ram? This is not a production
environment, I'm just learning and testing.I'll leave that to people with a recent encounter of the 10g2 installation process.
Also, what is the min ram requirements for the
Express version?256 MB as far as I remember.
C.

Is it possible to install SAP PI7.0 on LINUX -FEDORA CORE 8 OS?

Hi all,
I have LINUX - Fedora core 8 OS, is it possible to install SAP PI 7.0 on this flavor of linux.
If any one has already done the same, please guide me with the hardware and software requirements like (DB, JDK, etc).
Any help would be appreciated and rewarded.
Thanks,
Younus

Hi,
Sure. you can able to install PI7.0 with Linux.
The complete documentations are available in Service Market Place.
Check this URL:
https://websmp210.sap-ag.de/
Thanks,
Boopathi

Error in installation of Oracle BRM setup on a Linux Box

Hi All ,
I am trying to install an Oracle BRM setup on a Linux Box but during installation
I am facing a major error , please can anybody help me out in figuring out the cause . Any sort of help
would be appreciable .......
cat ./var/dm_oracle/dm_oracle.pinlog
E Fri Feb 1 11:46:21 2008 178.65.112.65, dm:908 dm_main.c(44):2641 1:<machine>:<program>:0:0:0:0:0
DM master dm_die: "bad mutexattr_setpshared of accept token: 38", errno 0
Error while running pin_setup script
PATH variable IS O.K...
LD_LIBRARY_PATH variable IS O.K...\n
You are the pin user
You are in the pin group\n
Starting setup.\n
#===========================================================
# Installation started at Fri Feb 1 10:08:25 2008.
#===========================================================
cm: Generating pin.conf file
pin.conf is generated under /home/pin/opt/portal/7.3/sys/cm/pin.conf
pin.conf is generated under /home/pin/opt/portal/7.3/apps/pin_remit/pin.conf
dm_oracle: Generating pin.conf file
pin.conf is generated under /home/pin/opt/portal/7.3/setup/scripts/pin.conf
pin.conf is generated under /home/pin/opt/portal/7.3/sys/dm_oracle/pin.conf
dm_oracle: Configuring database
Creating Portal tablespaces ... this may take a few minutes
Creating main tablespace 'pin00' (already exists)
Creating index tablespace 'pinx00' (already exists)
Creating temporary tablespace 'PINTEMP' (already exists)
Creating 'pin' user
Granting 'pin' correct permissions
Altering 'pin' user default tablespace
Altering 'pin' user temporary tablespace
Finished creating the Portal tablespaces
Continuing to Configure the database
Dropping table from file
Execute SQL statement from file /home/pin/opt/portal/7.3/sys/dm_oracle/data/drop_snapshots.source
Execute SQL statement from file /home/pin/opt/portal/7.3/sys/dm_oracle/data/drop_tables.source
Execute SQL statement from file /home/pin/opt/portal/7.3/sys/dm_oracle/data/create_dd_UTF8.source
Loading objects from file
pcmdd: bad connect for 178.65.112.65, errno 111
Re-reading the pin.conf file "./pin.conf" since it has changed. Previous file mod time was 1201791202, now it is 1201878509
errno=<PIN_ERR_DM_CONNECT_FAILED:26> location=<Unknown pin location:0> class=<UNKNOWN:0> field num=<0:0,0> recid=<0> reserved=<111>
pcmdd: bad connect for brm1.iaglab.com, errno 111
errno=<PIN_ERR_DM_CONNECT_FAILED:26> location=<Unknown pin location:0> class=<UNKNOWN:0> field num=<0:0,0> recid=<0> reserved=<111>
Linux lib Version
glib version :
bash-3.00$ ls /lib/libc-*
/lib/libc-2.3.4.so
Oracle Version
Oracle Version :
SQL*Plus: Release 10.2.0.1.0

I am having the same issue with installation of brm on AIX.
My research tells me it has to do with dm_oracle start up and below :
#========================================================================
# dm_shmsize
# (UNIX only) Specifies the size of shared memory segment, in bytes, that
# is shared between the front ends and back ends for this DM.
#========================================================================
# dm_bigsize
# (UNIX only) Specifies the size of shared memory for "big" shared memory structures,
# such as those used for large searches (those with more than 128 results)
# or for PIN_FLDT_BUF fields larger than 4 KB.
Any other clues leads to resolve the issue helps.
Thanks!

Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
Here are the steps we followed to setup the ODBC connection on Linux box.
1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
This is where we found the driver for SQL server SEmsss23.so.
2) We updated the odbc.ini file with the entry for SQL server with the connection details
SI_SQL_Server_DEV = SQL Server
[SI_SQL_Server_DEV]
Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
Description=DataDirect 5.1 SQL Server Wire Protocol
Address=10.230.216.52,54970
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SVBDW_NEW
LoadBalancing=0
LogonID=SIDatavalidation
Password=~~~Password123
QuoteID=No
ReportCodePageConversionErrors=0
3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

Hi,
Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
Method 1
Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
Method 2:
try using the complete TNS in below format in the datasource name section:
(DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
Method 3:
To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
hope helps you.
Thanks
Deva

OBIEE 11g Scheduler installation error on Linux box. Please help!

Hello,
I'm trying to install OBIEE on a Linux box. The repository was created using a Windows PC on a separate Oracle database on another server.
I have four of the five OBI components running but I keep getting this error for the Scheduler.
[2011-09-19T14:47:54.000+00:00] [OracleBISchedulerComponent] [ERROR:1] [] [] [ecid: 004fKlhR3PrEkJr5KJo2ye0006XX000000] [tid: dc253800] [68008] Scheduler Error: [[
Current Table: S_NQ_JOB.
[nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied
at OCI call OCISessionBegin.
Current Table: S_NQ_JOB_PARAM.
[nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied
at OCI call OCISessionBegin.
Current Table: S_NQ_INSTANCE.
[nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied
at OCI call OCISessionBegin.
Current Table: S_NQ_ERR_MSG.
[nQSError: 17001] Oracle Error code: 1017, message: ORA-01017: invalid username/password; logon denied
at OCI call OCISessionBegin.. Errors were encountered while initializing Scheduler's backend database, check database configuration.
I've checked the configuration and there is nothing wrong with it, plus I have checked connectivity from the weblogic server and the Linux server to this. Also I do not have Enterprise edition everything I do is at console level in Linux.
Please help. I've been trying to sort through this for a long time.
Thanks.

Becky,
You need not do any thing additional to have EM running in the OBI 11g instance. Although it is a deployed JEE application, if your Weblogic Server (WLS) is started and up and running then your EM Console should also be up and running.
You say that you are doing everything from the command line. So, start the Weblogic Server then navigate to http://< your server name> : 7001/console
If that comes up then go to
http://<your server name>:7001/em
That is your EM Fusion Console and it should come up as well.
Don't mess with the XML file directly.

PI7.0 Instalation on Linux box

Similar Messages

Maybe you are looking for