PI7.0 PIAFUSER, PIDIRUSER, PIRWBUSER, PIREPUSER getting locked.

Hello,
I have two PI systems PID and PIQ.
PID has central SLD and PIQ is configured to use central SLD during installation.
The PI users in PID and PIQ have different passwords.
I have noticed following users are getting locked in PID.
PIAFUSER, PIDIRUSER, PIRWBUSER, PIREPUSER
When i shutdown PIQ instance, they do not get locked in PID
I am not sure why PIAFUSER in PID is getting locked as soon as I start PIQ instance.
Any help is appreciated.

Hi ,
I am sure whoever has configured Central SLD has missed few steps while doing the configuration.
I would suggest you to go through the configuration guide and check what all steps are missing.
>>>The PI users in PID and PIQ have different passwords.
This isnt a problem. Now if the service users have different passwords, what we need to do is .........<b>Create separate service users in your PIQ system and mention the same in exchange Profile of PIQ system. Also the same service users needs to be created in your PID system with the same password. </b>
If that sounds confusing..
Refer SAP Note 720717: Reduce the number of System Landscape Directories (SLD)
If you have any other query  post the same.
Regards,
Sumit

Similar Messages

  • PIAFUSER PIDIRUSER & PIISUSER are getting locked  , when cache is refreshed

    Hi XI Gurus,
    My scenario goes like this.. Sonic MQ <- XI <- SAP CRM.The messages sent from CRM are reaching XI but not are not making to Sonic, and the error message in SXMB_MONI of XI is <SAP:Category>XIServer</SAP:Category>
      <SAP:Code area="INTERNAL">HTTP_RESP_STATUS_CODE_NOT_OK</SAP:Code>
      <SAP:P1>401</SAP:P1>
      <SAP:P2>Unauthorized</SAP:P2>
    I know this problem deals with the aunthentication.The users PIAFUSER PIDIRUSER & PIISUSER are getting locked when ever Iam trying to refresh cache in ID.When I unlock them and again refresh the cache they are again getting locked.when I unlock the users and restart the message it gives me an error of cache probelm .The mesage is stuck at call adapter phase in SXMB_MONI.Iam really confused of what to do.. please help me..

    And when the locks are gone it gives me the following error
    I have checked my receiver side every thing is fine.
    <SAP:Category>XIAdapterFramework</SAP:Category>
      <SAP:Code area="MESSAGE">GENERAL</SAP:Code>
      <SAP:P1 />
      <SAP:P2 />
      <SAP:P3 />
      <SAP:P4 />
      <SAP:AdditionalText>com.sap.aii.af.ra.ms.api.ConfigException: ConfigException in XI protocol handler. Failed to determine a receiver agreement for the given message. Root cause: com.sap.aii.af.service.cpa.impl.exception.CPALookupException: Couldn't retrieve outbound binding for the given P/S/A values: FP=;TP=;FS=CRSCLNT100;TS=Sonic_BusService;AN=EMADispositionIN;ANS=urn:mentorg.com:ema:disposition;</SAP:AdditionalText>
      <SAP:ApplicationFaultMessage namespace="" />

  • PIDIRUSER & PIRWBUSER Keep Getting Locked

    After a recent XI system copy my PIDIRUSER and PIRWBUSER keep getting locked by the kernel.  I did not change the passwords from the system I copied yet this problem only occurs in the new copy.  In SM21 it shows that SAPJSF locks it with repeated invalid login/passwords.  It seems to occur every 20 minutes on the nose but I can't find any jobs that correspond to this timeframe. 
    I have been through the enchange profile a number of times and validated everywhere I can think of but I can't find anywhere in ABAP or JAVA where these users are embeded with the wrong password.  I have also restarted multiple times during the system copy process and once just to try to stop this occuring.  I've refreshed the caches, I've sync'ed with the SLD, I'm at a loss.
    Anyone have any ideas where to procede?
    Thanks
    Phil

    Thanks Moorthy,
    I have gone through and changed my passwords for these two users per note 721548.  Still the same issue is happening.  I am somewhat puzzled since I have no jobs running under either user (at least none that should cause 3 failed logins in 20 minutes).  Also, this is a relatively unused system with no developers logging on to use either the directory or the runtime workbench.  So I really have no clue what is causing these failures.  It is pretty clearly failing from Java trying to connect to ABAP but why?
    Thanks for your help, I'll keep this open in case anyone wants a good mystery.
    Phil

  • PIRWBUSER is getting locked

    hello
    everyday the user PIRWBUSER is locked in our XI dev system
    I searched for jobs for that user and also tried checking su53
    but nothing came up
    any ideas ?
    thx shai

    Hi,
    As Ivan already said, if the password is changed it has to be maintained in Exchange Profile.
    Another common mistake is some RFCs might be using this UerId. But since the password is changed, it gets locked after this RFC tries to establish connection after 3 or 4 times. So check the RFCs.
    Regards,
    Jaishankar

  • PIRWBUSER getting locked repeatedly

    Hi Experts,
    We are facing a very peculiar problem . The service user PIRWBUSER is getting locked again and again . We have thoroughly checked with all the places where the service user is used and all those places are having the right entry  . Still the user is getting locked . Kindly let us know where exactly is this user  being used which has gone unoticed or there is some other problem .
    We have checked with all the possible notes related to this problem and checked with the PIRWBUSER in sm59, PMI store of J2EE admin and all such related places where actually this service user is in use .
    Please help .
    Regards
    Nishant Kumar Singh

    Check these discussions if you have no done already:
    PI7.0 PIAFUSER, PIDIRUSER, PIRWBUSER, PIREPUSER getting locked.
    Re: PIRWBUSER is locked by incorrect login
    PIRWBUSER is getting locked
    PIDIRUSER & PIRWBUSER Keep Getting Locked
    Regards,
    Ravi

  • PIAFUSER gets locked & SLD Data Supplier won't start

    Hi guys,
    well i am no basis guy but i have to do the following.
    We want to use one SLD for PROD & DEV. We chose DEV SLD to be the one!
    Therefore i followed Note 720717 in detailed way.
    Because there is mentioned i have to change sth. in Service SLD Data Supplier i did so in PROD for giving the SLD-Adress of DEV. This was looking good, i changed, saved and restarted service.
    But since then for changing back the settings for this service, the service won't come up. I can stop it but never restart it.
    In addition our DEV is also not working anymore, here the User PIAFUSER gets locked all the time on DEV (ERROR 401). We have no clue why this is because we never touched a service with this user since this seems to be an authorisation problem!
    Could someone help?! We already read post and blogs the last 4 hours but nothing helped that far!
    br

    Hi ,
    Well this is due to password mismatch.
    What u can do is , reset u r password of the user or if u want to use the same pass just login with the user in sapgui.
    Now in SLD Exchange profiles try to put again the same password what logged in sucessfuly.
    it"s clearly a password mismatch , system is trying to log in and after certain attempts it gets locked
    rwd points if useful
    rgds
    srini

  • PIAFUSER and PIAPPLUSER get locked all the time - where are they used?!

    Hi guys,
    well i am no basis guy but i have to do the following.
    We want to use one SLD for PROD & DEV. We chose DEV SLD to be the one!
    Therefore i followed Note 720717 in detailed way.
    Because there is mentioned i have to change sth. in Service SLD Data Supplier i did so in PROD for giving the SLD-Adress of DEV. This was looking good, i changed, saved and restarted service.
    But now the User PIAFUSER and PIAPPLUSER get locked all the time - even without trying to get SLD-Connection.
    When i do SLDCHECK we also get error:
    Calling function LCR_LIST_BUSINESS_SYSTEMS
    Retrieving data from the SLD server.
    Function call returned exception code ....4
    => Check whether the SLD is running!
    ..and it is running!
    Could someone help?! We already read post and blogs the last 4 hours but nothing helped that far!
    br
    Edited by: Fritz Munster on Jul 21, 2008 4:32 PM
    And we get some errors from CC also - e.g. when we want to get a file read:
    com.sap.aii.af.ra.ms.api.ConfigException: Some of the IS access information is not available. SLDAcess property may be set to true, but SLD is not available.

    Hi,
    well i already re-checked all pwds again like given in Note 936093.
    Everything runs fine that far but again, the PIAFUSER gets locked, PIAPPLUSER doesn't get locked anymore - finally.
    The reason why i was coming to this error is because we need to use one SLD - i described already.
    So now we wanted to check our PROD Scenarios, running a test with a FILE-CC and got following error in CC-Monitoring:
    ERROR:com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
    What could cause this error else than some stuff with pwds?!
    Any ideas?! i work 10 hours on this crap now
    br

  • AD account getting locked out after password change in Jabber

    When user changes his network credentials and does not update them in Jabber. Jabber will still try to connect to phone services and voicemail with the old credentials which is leading to their account getting locked in AD after three attempts.
    We are using Jabber 9.6.1, so a fairly new version.
    Can some suggest if there is a workaround?

    Hi,
    We are seeing a similar issue after the user has changed their AD password the account repeatedly gets locked out when they try to log into Jabber. 
    We are also using Cisco IM&P and our CUCM is LDAP synced
    I am interested to know why you are asking if LDAP authentication is configured?
    Regards,
    Andries

  • Unity Connection - Users with system default password getting locked out

    Hi all, hope everyone is well !!
    I am experiencing a strange problem and hope someone can give me some direction on where to start digging on this issue.
    I am getting a good number of users reporting they are getting locked out of their voice mail and they all claim that they have not changed their password and some user even got their greeting recorded by someone else. One thing in common for the users who reported the issue is that they all using the system default password. I am trying to trace to find out who/what has access to these users' mailbox but so far I have not had any luck.
    Thanks in advance !!
    Danny

    Thanks, yes am doing that now and cant really find any new/unique pattern. Plus the trace is pretty hard to follow. Cant really figure out any times stamps in the trace also. The current trace file is defaultTrace.18.trc and it has very simiiar content as some of the older ones before the problem. Right now the ESS portal is working and the slddsuser password is not locked. It seems the problem takes place on start up?
    /usr/sap/ESS/JC77/j2ee/cluster/server0/log
    Tough thing to test in production.
    I wonder what takes place at startup that would kick this problem off?
    brad

  • My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    So now that you have repeated the same thing three times that doesn't make things any clearer at all.
    You are copying files from where to where?
    How are you attempting to copy files, software or click and drag?
    Any other detail would be helpful.
    Allan

  • Laptop screen not getting locked on close lid or resume from suspend

    I am using kde 4.4 rc2 atm. My laptop screen is not getting locked when I closed the lid or when laptop resumes from a suspend to ram.
    It used to work correctly before I installed acpid(before that I just had the acpi client package installed.) Power Devil used to handle everything correctly.
    The power devil settings already says, Lock screen on resume and I have added Lock screen as action for Lid close for performance profile.
    Is there any way to fix this. I want to make laptop screen lock when I do lid close or resume from suspend/hibernate.

    Suspend has always been problematic under Linux. It seems to be hit or miss for the most part, but here are some things you can try:
    Use an LTS kernel, tuxonice, pm-utils, etc. See Suspend and Hibernate
    Try a different graphics driver
    Tweak the driver module parameters or build your own driver.
    Unfortunately I don't have experience with the radeon driver, so I can only give you ideas.

  • ABAP+JAVA System Copy -- Administrator account getting locked

    Hi,
    I am in the process of doing system copy of my portal to a new server. As per the SAP instructions, I had updated the JDK and SP levels of my EP to the latest supported ones.
    Now when i am doing JAVA Add-in Export of my system, SAPinst is throwing error that --
    "Error connecting to http://Entportal:50000/sap/monitoring/SystemInfoServlet. The provided user data might be incorrect or user might be locked.:
    and when I check the "administrator" user account, it is getting locked. Even though I manually unlock it and update the password is secure storage, still when I run SAPinst, again it is getting locked. I have also chnged the path of my temporary directory to c:\temp which has no spacees in it, according to SAP instructions.
    I have raised the issue through OSS, but still, in the mean time can sombody help me?
    Regards,
    Mandar

    Hi Akshay,
    I am not using any ID. SAPInst itself is trying to access systeminformationservlet using administrator account. at this stage it is failing to get the correct password and thats why my administrator account is getting locked.
    Regards,
    Mandar.

  • How do I fix my animation presets for text that won't load? It seems to get locked in loop and I am forced close Adobe Bridge.

    How do I fix my animation presets for text that won't load? It seems to get locked in a loop when I click on one and I am forced to "fore close" Adobe bridge which After Effects uses to locate the presets. Any help would be appreciated. Thanks.

    What is your exact workflow? The proper procedure is to select your text layer in AE, find the text preset you want to use, then drag or double click that preset to apply it to your project.
    It also helps  if we know your version of AE and OS down to the decimal point. You didn't give us much to go on.

  • I have uninstalled and installed the latest Flash Player 17 many times.  I am currently working on a yearbook site that gets locked every time I try to add photos.  I have also received a plug in error even though the plug in box is checked.  I have a Mac

    I have uninstalled and installed the latest Flash Player 17 many times.  I am currently working on a yearbook site that gets locked every time I try to add photos.  I have also received a plug in error even though the plug in box is checked.  I have a MacBook Pro.  Please help!!!

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/message/5249945#5249945

  • Purchase Order is getting locked

    Hi Experts,
    I have very strange problem with some of purchase orders.
    I create the purchase order and saved it.
    When i tried to chenge purchase order system does not respond and dont allow me to save the order.
    Transaction gets locked which can be seen in SM12 tcode also.
    Also when i tried to release the PO system again performs the same way and trasaction gets locked.
    I checked the release strategy, customization, material and vendor master, also the authorizations..
    Basis person also checked it but couldnt able to locate any specific reason.
    In every PO i faced the problem Material and Vendor is same.
    Waht could be the reason thet transactions are getting locked when working with these POs , any specific things to be checked , configuration, or Notes to be applied.
    Please guide me in this as i am not able to process these very important POs.
    Best Regards,
    Kapil

    Hello Kapil
    Can you check under System -- User profile -- Own data, under this check under 'Parameters' tab what are the parameters set for your login?
    Amol

Maybe you are looking for