PI7.0: SLD - Technical System of type "Exchange Infrastructure"
Hi Guys,
The adapter engine was empty in the integration directory and as part of it i followed the steps in the sap note - 764176 Error in XI due to inconsistency in the sld. I did the following steps
1. Switch to "Home" in the "Technical Landscape" view, and select the
"Exchange Infrastructure" technical system type there. Select all
domains and XI components for the host and delete these by selecting
them and pressing 'Remove'.
2. Restart the J2EE server. After you restart the server, the XI
components log on to the SLD again and create a new entity of class
"XI Integration Server".
3. To register the directory and repository again, you must also log on
to the two tools.
I have restarted the j2ee server and looged into the IR and ID but they are not automatically registered in the central sld.
central sld is on solmanger box. How to register IR, ID, RWB and central adapter engine under the technical systems of type exchange infrastructure ?
any help would be really appreciated
Thanks,
Raj
Hi Reddy,
i faced the same problem few days back...
check this link
/people/venugopalarao.immadisetty/blog/2007/03/15/adapter-engine-cannot-be-found-in-integration-directory
and also cross-check the post installation steps.
In my case the Business system for XI was created of type web as java... but it should be of type web as abap.
Sachin
Similar Messages
-
SLD - Technical System Type Exchange Infrastructure
Hi experts,
does anybody know how these Entries in the SLD appear?
Technical System Type: Exchange Infrastructure
Adapter Engine
Adapter Framework
Domain
Integration Directory
Integration Repository
Integration Server
RWB
Runtime Management Server
are they generated automatically? at which time? whats the trigger for them to appear?
Or are they inserted manually?
Thanks!
Chrishi,
>>are they generated automatically? at which time? whats the trigger for them to appear?
Or are they inserted manually?
automatilly
RZ70 in SAP ABAP
and from visual admin - SLD bridge
Regards,
Michal Krawczyk -
SLD Technical System Process Integration
Hi XI Gurus,
I have a question regarding the 5th type of Technical Systems, Process Integration. Is it automatically generated once XI is restarted? In Note 764176, it's telling me to remove the PI technical systems. How can I recreate them? Will they be generated automatically or will we input them manually? Thanks!Hi,
Ideally, you need to have 2 Technical System entries for your PI system and 6 entries for Technical System Type 'Exchange Infrastructure'.
the first category (i.e 2 systems) suppose to get deployed automatically using RZ70 (ABAP) and SLD Data Supplier (java).
And the 2nd catergory (i.e 6 entries) suppose to also get deployed automatically but in case, If you do not find them all here is the workaround to get them
1. If XI Integration Directory or XI Integration Repository not found then, Please start these tools from default tools page (http://<hostname>:<http port>/dir) upon starting these 2 components you will see them added in SLD
2. If Adapter Engine not found then, logon NWA, stop & start XPI Service: AF Core & XPI facade: Adapter Framework (Navigation - Configuration Management->Infrastructure->Java System Properties); this should help you get Adapter Engine
3. The other 3 entries, Domain, Integration Server and RWB should come and usually comes always with automatic installation.
4. If you still do see after following above instructions, i suggest delete all of them both Technical specific & Exchange Infrastracture" related entries from SLD and then re-deploy RZ70, push 'Collect and Send data' option from 'SLD Data Supplier' from NWA.
ofcourse, you can always follow the instructions provided in the note that you were refering.
Regards
Sekhar -
SLD Technical system data in ABAP table?
Hi All,
Can some one guide me ABAP table name where I can see all the SLD Technical system entries?
Or can read SLD Technical system entries via some BAPI/RFC.
RegardsCheck LCR_GET_BS_DETAILS. In se24 check for Cl_SLD* , you will get some classes which will help you get the information.
What are the Technical system data you are looking for ?
In program SXMS_PF_GET_OWN_IS_NAME_MC , go through the subroutine get_sld_content. -
SLD - Technical System Types: Third-Party vs. Standalone Java
Hi all,
can somebody explain what´s the difference between the technical system types
"Third-Party" and "Standalone Java"
Please give also one example for a standalon java type.
Thanks,
KrisHi Kris,
1. Third Party: Can be any Tech System. For example you want to send a xml message from a file adapter residing on your PC. You can define your PC as a 3rd party Tech/Business System.
2. StandAlone Java: WEBAS640 has bot Basis and Java Stacks. If you installed only the standalone java Stack on a server, then you define a standalone java tech system.
For more info check the XI-3.0 Help documentation.
Regards
Prasad -
Hi all,
When i go to the sld of my XI server and there inside technical landscape when i choose the technical system type as 'Exchange Infrastructure' number of application systems are displayed. I find tht there are application systems corressponding to Repository, Directory , RWB , IS and AE.
When are these entries getting added. I believe they are gettin created automatically but when. Is it at the time of installation.
Any kind of suggestion would be helpfulhi,
>>>>Is it at the time of installation.
AFAIK yes,
so don't need to maintain it manually later on
Regards,
michal -
Regarding error in creating technical system of type WEB AS ABAP
while creating technical system of WEB AS ABAP i have few doubts
1) host name:(do we have to give sap system name or xi system name)
and while creating business system for this technical system am not able to find the option under RELATED INTEGRATION SERVER i.e xi3/sxi what ever it may be,so am facing very difficulty while creating communication channel and not able to select the integration engine under the ADAPTER ENGINE ,so please provide me suitable solution with screen shoits if possible ,it very urgent for mepls check this
/people/michal.krawczyk2/blog/2005/03/10/registering-a-new-technical-system-in-sld--abap-based
as per ur doubt
1. <i>host name</i>:; sap system (can find under system status info-->database of R/3)
2. <i>SId is system status</i>->database>name (3) characters
3.<i>while creating business system for this technical system am not able to find the option under RELATED INTEGRATION SERVER</i>--as fra as this info that is there when u follow the wizard of creating Business system , also did u select business system role as application system name then probly u can get the related server name ,make sure ur technical system is created well
<i></i> -
SLD - Technical System Wizard - Select System: Only None (Standalone J2EE)
Hi, I want to connect to some RFC-Modules on a SAP/R3 System from my NetWeaver Web DynPro Application. Therefore I have to create JCO-Connections for the Models I created (MODELDATA_DEST and RFC_METADATA_DEST). For this I have to define the System I want these JCO-Connections to connect to in my SLD which I'm trying to do using the "Technical System Wizard". (SLD -> Technical Landscape -> New Technical System -> Web AS Java (because I'm developing a Java Application).
In the next screen I have to specifiy the location of my Server. I thought, that here, I have to define my SAP/R3 Server to which the JCO-Connections for my two models shall be connected. But the only option I can choose for "Web AS ABAP" (The ABAP System where my RFC-Modules are stored I guess) is "None (Standalone J2EE)".
Why is that? Or am I missing something? I thought I have to specify the SAP/R3 System containing the RFC-Modules here and not my local NetWeaver Server.
Thanks for your help
ThomasHi,
there seems to be a misunderstanding here. For JCO to work you need to set up the ABAP-System as a technical system in SLD, otherwise the Java-System is not able to determine information like Hostname and Portnumber for the RFC. Of course it's good to set up your WAS-Java in SLD as a technical system as well, but for the JCO the ABAP side is more important as far as I can see.
To have a clean start I suggest that you set up all involved technical systems in your SLD.
Regards,
Jörg -
SLD - Technical System general settings not all filled..is this a problem?
Hi all,
I don't really have any experience with the configuration of SAP PI, I just do some maintenance and small adjustments from time to time.
I noticed in the SLD in the Technical System settings of the AS JAVA that the following fields were not filled in the general tab:
I'm a bit worried since these fields are filled on our test environment, on our production environment they are not...
Installation Number: *** not yet assigned ***
System Number: *** not yet assigned ***
I can't just add this info, it seem I have to make remove the existing one and create a new entry.
Everything seems to be working fine so I'm a bit reluctant to try and chance this if it's not necessary.
So my question is, could it cause a poblem further on if these fields are not filled?
If so, can I fill these fields without removed the existing entry and creating a new one?
Thanks for any feedback provided.
Cheers,
BenjaminHi Michal,
thanks for your reply.
Would this be done via the SLD Data Supplier Configuration: SLD Data Supplier in the NWA ?
I don't have access to this in our production environment right now so I can't try.
If so, I'll try it later with a system admin.
B -
When we create a Technical System in the SLD, it will not accept a fully qualified DNS name, the name seems to truncate at the first period. (i.e sdn.sap.com turns into sdn).
Does anyone know how to work around this issue other than adding an entry to the host file?
Thanks,
AndrewHi Andrew,
Please read the "Parameter Help" for host name:
"By default, host names in SLD are written lower case without any network domain."
So I guess you can't give a full DNS name even if this may lead to confilicts:
"This implies to use different System Landscape Directories for network domains having name conflicts at this level"
Regards,
Michal Krawczyk
https://www.sdn.sap.com/sdn/weblogs.sdn?blog=/pub/u/34500 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] -
SLD-Technical system -Web AS Java
Dear All,
I am able create techinical system for Web As ABAP. And want to create Web AS Java. Will you please explain me procedure.Hi,
Ideally you should not create any technical system manually. When you go to SLD Administrstion --> profiles --> Data supplier, here you enter your backend server specific data for e.g. host name, instance number etc, and then you restart your SLD.once this is done successfully then your technical system automatically gets available under Technical Syatems. you should follow the same for JAVA system.
Regards,
Ameya -
Problem with Portal's SLD technical systems setup..
Hi guys,
I'm implementing ESS v60.2. and need to setup portal's SLD. When I'm trying to set-up Web AS ABAP system, I can select no Product (in the last step). System response, that the Product has no Components. I understand, that this is probably problem of basis, but...
Can anyone help, what to do?
Thanx, PeterYou should import the CR Content to the SLD to get the list of components. So, you do this by
Administration > Import(under Content) > In the Browse choose the path
<installation Drive >:\usr\sap\J2E\SYS\global\sld\model and choose CR_Content.zip and Press Import CR Content.
It will take some time like an hr or more to import. Be patient.
Now, you will see the produts.
Hope this helps,
Kumar -
Cannot export Exchange Infrustructure Technical System from SLD_production
Hi all,
I recently got the XI production system installed, which came with its own SLD (from now on, SLDp).
I want to syncronize this SLDp with the SLD in the development system (SLDd), notice that I have no consolidation system.
So I exported every Technical system defined in the SLDp and imported them into the SLDd, with the idea of exporting later the whole SLDd into the SLDp syncronizing the 2 systems this way.
The only problem is I cannot export any technical system of type "Exchange Infrastructure" from SLDp. They are 6:
XI Adapter Framework
XI Domain
XI Integration Directory
XI Integration Repository
XI Integration Server
XI Runtime Management Server
I'm afraid I could overwrite them and mess up the production environment as soon as I perform the full export from SLDd.
Is it ok if I don't export them, and just go on with the business systems and then "full export" the entire SLDd?
Thanks,
DanieleDaniel,
You should not try to copy then from one SLD to other. The TS with respect to XI (Exhchange Infrastrucutre) need to be created (I think they get created autmatically when importing CIS information while installing SLD.. not sure) separately for each system.
VJ -
Hello,
I found that under the technical system type process Integration there is an entry of XI Integration Server but whereas in dev and quality there are 6 entries.
Below Types are not avialable in SLD technical system.
XI Domain
XI Integration Directory
XI Integration Repository
XI Runtime Management Serve
XI Adapter Framework
Kindly suggestHello
There should be 6 entries for each PI system in the SLD. If you are missing any, then as a first step you should apply note #764176 Manual correction of XI content in SLD.
Regards
Mark -
Database tab is not filled in SLD after I create a technical system abap
Hi guys,
why is it? what do I have to set up to have this tab filled with valid values?
Thank you
OlianHi,
For technical system of type WebAS ABAP, you do not create it manually in SLD......instead its process is to log into R/3 system and run transaction RZ70 and from this transaction technical details of R/3 system are published to SLD of XI..........this is a basis activity and so you can ask your basis guys to do it for you...........then when it is done, then your Web AS system will be created in technical system in SLD with all the data filled properly.
Regards,
Rajeev Gupta
Maybe you are looking for
-
Open Source project - request for interest
Hi, I know this may not be the most appropriate place for this but I couldnt find anywhere else. The project is due to start up in early 2006. The technology is Java based and supports J2EE. It enables developers to work at a high level and generate
-
How do I import an EPS file for a Barcode?
I made a book but want to add a Barcode. The barciode company made one for me in EPS file format. Can I just drag that in? It seems to automatically into a PDF file when I do that, which seems strange?? Thanks
-
USB interface pressure sensors
Hello all! I've recently acquired a DigiTacts pressure array sensor like those depicted in the following link: http://www.pressureprofile.com/products-digitacts Has anyone already worked with these sensors using LabView? The interface is USB. Will
-
EP 6.0, SP11 and Solution Manager 3.2
Hi everyone, Is it possible to do add EP satelite systms? currently I am on solution manger 3.2, kernal 6.40 and Enterprise Portal 6.0, Service Pack 11 I would really appreciate if anyone can answer this question and great points will be rewarded tha
-
I can't find where to enable the infrared receiver on my mac OS X 10.9.2, could anybody help me? thanks