PI7.1 Administration part error

Hello Expert:
i installed PI7.1, IR,ID works correctly, but i log on the adminstration part, there is no integrity information for integrition server: host: System number:
and click any linkage in left side, java.lang.NullPointerException occurs
who know the exactly reason
thanks in advance
Kevin
Edited by: nakashima1 on May 17, 2010 3:51 PM

Hi Kevin,
Are you asking about the administration link which is present in integration builder pager or the nwa whcih is there in PI 7.1 just below the run time work bench.
have you tried with the direct url
http://<server>:<port>/nwa
report this to your basis team , if there are any authorization to be given to your ID.
regards,
Srinivas

Similar Messages

Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists

Hi there,
I am getting the following error in SharePoint 2007 site.
Web Part Error: This page has encountered a critical error. Contact your system administrator if this problem persists.
Show Error Details
Hide Error Details
[WebPartPageUserException: This page has encountered a critical error. Contact your system administrator if this problem persists.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.RethrowExceptionIfNeeded()
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Guid guid)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
There is no event logged related to this error. I have checked ULS log and nothing much I can find over there.
Any help would be highly appreciated.
Thanks,
Puli
Puli Bala

It is not only because of unsafe controls. Please refer the articles below.
http://www.dotnetmafia.com/blogs/dotnettipoftheday/archive/2008/09/24/safe-mode-did-not-start-successfully-request-failed.aspx
http://blogs.edwardwilde.com/2009/12/22/safe-mode-did-not-start-successfully-could-not-load-file-or-assembly/
https://social.technet.microsoft.com/Forums/sharepoint/en-US/6d81f7b0-33c5-482b-b7aa-9f639c784dea/what-reason-can-cause-the-errorerror-failure-in-loading-assembly-microsoftsharepoint?forum=sharepointadminlegacy
https://paulsiu.wordpress.com/2008/07/24/sharepoint-loading-assembly-error-in-the-event-log/
Puli Bala

Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

Update firefox, it asked me to update flash, I tried to update flash but it said I had to close firefox. A box came up and said the Flash install would continue when I closed firefox. I closed all firefox windows and no update of flash occurred. I tried relaunching firefox but got the "Doesn't start when starting as administrator. Error Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system." message. I rebooted the system, no improvement. I tried to run firefox as administrator and got the same message. Either I find a fix or I won't be able to use firefox and will have to go back to ie.

-> press '''CTRL''' + '''SHIFT''' + '''ESC''' to Open Task Manager -> Processes tab -> right-click '''firefox.exe''' and click '''End Process Tree''' -> close Task Manager
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Troubleshooting plugins
* https://support.mozilla.com/en-US/kb/Troubleshooting%20plugins
Check and tell if its working.

An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000)

Hi,
When i open my Password Reset portal then provide Username credentials in text box and click on next then asked the Securites Question Answers to me,i provide the correct Answers to the securites Question after this password reset portal asked
me New Password and Confirm Password then click on next for resetting the password then gives below Error only for 2 Users. and all other users are working fine.
An error has occurred. Please try again, and if the problem persists, contact your help desk or system administrator. (Error 3000:)
Regards
Anil Kumar

Anything in the event log?

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.

Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have

Hi, I am unable to install new itunes version to windows 7 PC. It requires application support and gives windows error 2. I have tried to save on desktop and run as administrator but errors remains, what other options do I have?

Hello, hanliefromzaf.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
iTunes for Windows: Unable to install or open
http://support.apple.com/kb/ts5376
Cheers,
Jason H.

Web Part Error From build-in "Contacts" App

My SP 2013 Foundations has been functioning normally for the past few months until this week. I added the built-in "Contacts" app back when the site was built. This week for some reason when I go to click "Add", I receive the following
error:
"Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe. Correlation ID: f590159c-dcb7-a0f5-9dc9-76bb9b18c79e."
I can click "edit" on that list and make changes fine.
Attempted to Google this one but for the most part my search has turned up nothing. This error seems to be experienced most times by individuals who built their own custom web parts and did not add Safe Controls to the web.config file. How could I get an
error like this with the default/built-in app?
I don't see anything helpful in the logs ( %SystemDrive%\inetpub\logs\LogFiles ) as it just shows the point where I get the error, without displaying any more info: 2013-04-26 14:55:03 192.168.0.67 GET /Lists/Company+Directory/Contact/newifs.aspx
If you need any more information, please let me know! Thanks

Went to the log folder here:
I can see this in the log files when I try to click "New":
04/30/2013 13:28:21.87 w3wp.exe (0x1D70) 0x200C SharePoint Foundation Monitoring b4ly High Leaving Monitored Scope (PostResolveRequestCacheHandler). Execution Time=28.0750765809621 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc
04/30/2013 13:28:21.88 w3wp.exe (0x1D70) 0x200C SharePoint Foundation Web Parts ajpj6 High UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe. 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc
04/30/2013 13:28:21.88 w3wp.exe (0x1D70) 0x200C SharePoint Foundation General ajlz0 High Getting Error Message for Exception Microsoft.SharePoint.ApplicationRuntime.SafeControls+UnsafeControlException: A Web Part or Web Form Control on this Page cannot be
displayed or imported. The type could not be found or it is not registered as safe. at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Boolean isAppWeb, Guid guid, Guid solutionId, Nullable`1 solutionWebId, String assemblyFullName, String
typeFullName, Boolean throwIfNotSafe) at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts) 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc
04/30/2013 13:28:21.88 w3wp.exe (0x1D70) 0x200C SharePoint Foundation Web Parts 7935 Information http://(redacted)/Lists/Company Directory/Contact/newifs.aspx - An unexpected error has been encountered in this Web Part. Error: A Web Part or Web Form Control
on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe. 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc
04/30/2013 13:28:21.92 w3wp.exe (0x1D70) 0x200C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Render Ribbon.). Parent SharePointForm Control Render 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc
04/30/2013 13:28:21.92 w3wp.exe (0x1D70) 0x200C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Render Ribbon.). Execution Time=4.37541642862431 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc
04/30/2013 13:28:21.93 w3wp.exe (0x1D70) 0x200C SharePoint Server Search Query dn4s High FetchDataFromURL start at(outside if): 1 param: start 0be6169c-bc0c-a0f5-9dc9-70ab1e3484cc

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported.

SharePoint 2007 custom (VS 2008) solution is upgraded to SharePoint 2013 using (VS 2012). I followed this approach.
I had created new empty project (solution) in SharePoint 2013 using (VS 2012) compiled and deployed successfully. All safe controls are registered in the web.config file. After deploying solution i Restarted IIS also, still getting this error. How to resolve
Error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe. Correlation ID: 5d217c9c-1827-7083-80cd-e095a30befee.
Show Error Details
Hide Error Details
[UnsafeControlException: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.]
at Microsoft.SharePoint.ApplicationRuntime.SafeControls.GetTypeFromGuid(Boolean isAppWeb, Guid guid, Guid solutionId, Nullable`1 solutionWebId, String assemblyFullName, String typeFullName, Boolean throwIfNotSafe)
at Microsoft.SharePoint.WebPartPages.SPWebPartManager.CreateWebPartsFromRowSetData(Boolean onlyInitializeClosedWebParts)
<menu class="ms-hide" id="MSOMenu_WebPartMenu"><ie:menuitem id="MSOMenu_Minimize" text="Minimize" title="Collapse this web part." type="option"></ie:menuitem><ie:menuitem
id="MSOMenu_Restore" text="Restore" title="Expand this web part." type="option"></ie:menuitem><ie:menuitem id="MSOMenu_Close" text="Close" title="Close this Web Part. You can still
find it under closed Web Parts section in the insert ribbon. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/DelItem.gif" id="MSOMenu_Delete" text="Delete"
title="Delete this Web Part from the page. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem type="separator"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/EditItem.gif"
id="MSOMenu_Edit" text="Edit Web Part" title="Change properties of this shared Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem id="MSOMenu_Connections"
text="Connections" title="Show connections options for this Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem type="separator"></ie:menuitem><ie:menuitem
id="MSOMenu_Export" text="Export..." title="Export this Web Part. These changes will apply to all users." type="option"></ie:menuitem><ie:menuitem iconsrc="/_layouts/15/images/HelpIcon.gif" id="MSOMenu_Help"
style="display:none;" text="Help" type="option"></ie:menuitem> </menu>

Hi Ashok,
According to your description, my understanding is that you got an error after you re-built a SharePoint 2007 solution with VS2012, and deployed it.
Make sure the Namespace and Type Name are consistent across all files where indicated. Also with matching case sensitivity. Verify web.config file and assembly in GAC or virtual directory bin folder in post deployment.
More information, please refer to the link below:
http://roykimsharepoint.wordpress.com/2013/04/27/classic-web-part-errors/
Here is a similar post for you to take a look at:
http://stackoverflow.com/questions/1689707/sharepoint-web-part-type-could-not-be-found-registered-as-safe
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

Web Part Error in Sandbox solution

Hi, I used the following code for "ADD POST IN NEWSFEED USING C#" in sandbox solution 2013.
string serverUrl = "http://sanchit:5097/";
string accountName = @"tafecorp\spservices";
SocialDataItem userMentionLink = new SocialDataItem
ItemType = SocialDataItemType.User,
AccountName = accountName
SocialPostCreationData postCreationData = new SocialPostCreationData();
postCreationData.ContentText = "{0} does great work!";
postCreationData.ContentItems = new SocialDataItem[1] { userMentionLink, };
try
ClientContext clientContext = new ClientContext(serverUrl);
SocialFeedManager feedManager = new SocialFeedManager(clientContext);
feedManager.CreatePost(null, postCreationData);
clientContext.ExecuteQuery();
lblReport.Text = "The post was published";
catch (Exception ex)
lblReport.Text = ex.ToString();
When i run the code the following error comes. How to solve this issue. Thanks in advance.
Web Part Error: Unhandled exception was thrown by the sandboxed code wrapper's Execute method in the partial trust app domain: An unexpected error has occurred. Correlation ID: 5f639c9c-7639-50f3-7dce-34ae387d3ed0.

Share the details about correlation ID in ULS logs
http://sharepoint.stackexchange.com/questions/59679/sandbox-unhandled-exception-was-thrown-partial-trust-app-domain
Well it's taken a few days but I've finally managed to work this one out however it did involve me having to dissect the whole project and reintroduce each piece one at a time.
A few issues were causing it:-
1) I had set one of the projects "Include Assembly in Package" property to false.
2) A static method was making a call to an SPList which turned an empty (null) value. Added a value to that item and the error disappeared.
3) I'd declared a variable as being of type double and set its default value as 0.
Now why the system couldn't have told me that's what the problems were rather than throwing this generic error is a different story! It would have saved me many an hour of confusion.
http://stackoverflow.com/questions/3905388/sharepoint-2010-sandboxed-webpart-error
http://social.technet.microsoft.com/Forums/sharepoint/en-US/c11ab5df-562e-43b4-b350-5c4d07da8bf3/sandbox-solution-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute?forum=sharepointgeneralprevious
http://sohilmakwana.wordpress.com/2013/11/29/sandbox-error-unhandled-exception-was-thrown-by-the-sandboxed-code-wrappers-execute-method-in-the-partial-trust-app-domain/
If this helped you resolve your issue, please mark it Answered

Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.

We have an SharePoint services 3.0 installation that uses custom web parts on 100s of subsites. The custom web parts on any website is presenting this error
Web Part Error: A Web Part or Web Form Control on this Page cannot be displayed or imported. The type could not be found or it is not registered as safe.
This past weekend we decided to create a new database server and migrate the databases to the new server in an effort to retire an old box.
INitially we attempted to go through the configuration wizard which didnt do anything but add a new database server to our farm. What we have done is remove the new database server from the farm and use an alias on the SP server to continue to use
the same name but actually get its data from the new database server.
Everything works with the site except these custom webparts.
Any thoughts on where to go to first, should i redeploy what i think are the webparts from VS 2005 (solutions are VS 2005 slns.)?
Tony Spaulding

You need to make Safe Control enteries in your web.config for the particular web application.
Open web.config
Locate the SafeControls Tag
Make a safe control entry
<SafeControl Assembly="Assembly name, Version=1.0.0.0, Culture=neutral, PublicKeyToken=d8eb6481d8b4beec" Namespace="your webpart namespace" TypeName="*" Safe="True" />
In order to find the assembly details, Open the GAC. Right click on your dll and then click properties.

I just replaced Internet Explorer with Firefox. I usa Outlook for my email. When I try to go to a link from an email a long thin message appears which says in part: "error occurred sending command to application"

I just replaced Internet Explorer with Firefox. I usa Outlook for my email. When I try to go to a link from an email a long thin message appears which says in part: "error occurred sending command to application"

Try:
*http://kb.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

Web Part Error: Sandboxed code execution request failed - office 365

If i am trying to edit the webpart, i am getting this error "Web Part Error: Sandboxed code execution request failed"
But the same code worked properly before two months, i didnt done any deployment activities from last 6 months..i dont know how it is possible ?
and the same issue happening during the javascript post back also
1) I cant able to restart the sandbox service because i am using office 365
2) it worked properly before march month, after the patch upgrade which is released by microsoft, i am facing this kind of issue..
can any one help to resolve this issue ?

Hi,
Please post your question on online community for sharepoint

This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000]

Software: Microsoft Office 2007 Professional Plus
Service: Microsoft Office 365 - Cloud Hosted
Hello,
I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
The following recipient(s) cannot be reached:
Megan Bennis on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Charity Lurk on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Susan Parker on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
- This entailed manually downloading/updating the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
repopulate when you open Outlook again. This also did not resolve my issue.
Any ideas? Thanks in advance!

That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.

Administrator account error:

I am signed in as administrator on my desktop PC (Pavillion a1719n). I have to enter a password to sign in. When I go to the user accounts info, I am listed as the only administrator and only user of the PC. I received this PC from my son and changed the administrator name and pw from his to my info. But when I try to download videos from Youtube, it says I do not have permission and need to ask an administrator, at the same time I am signed in as administrator. A few times I was able to download the videos if I first shared them to Facebook and worked from there. Now even that little trick won't work. I never had this problem on my other HP. How can this be fixed so it recognizes me as the administrator?

I'm not real sure about this but when you visit YouTube you might be auto-logging on using your son's YouTube ID which now doesn't match your computer User ID since you changed it.
If this sounds plausible to you; I woud log out of the YouTube account and create a new YouTube account and then try downloading videos. What I'm implying is that the Administrator account error is resulting from YouTube trying to match the YouTube User ID with your Windows User ID and not succeeding.
Good luck.

Any E-books for DBA Administration - Part I

Hi friends,
Does any one have oracle press e-books that can help me
prepare for OCA - DBA-Administration Part I
could you please give me the link
Thanks
plz help

Hi
Usually, I am not actively involved here, but I will help u.
Send me email at [email protected], I will mail u all oracle e books
Thx

PI7.1 Administration part error

Similar Messages

Maybe you are looking for