PI7.1 Configuration Wizard NetWeaver Initial Setup

Hi,
I have installed PI7.1(XI0) and config the SLD via Configuration Wizard. I want to register to existing remote SLD(DEV) and need to input SLD client user, pls. tell me which system I need to create this client user?
Regards,
Jack

Hi Jie,
I have not carried oyt any PI 7.1 installation, but yes PI 7.0.
In one of the steps of sapinst you are asked for SLD type (local or centralized). And every users needed to connect to SLD are created automatically and with the master password. Is it different in PI 7.1?
When you say vía Configuration Wizard, do you mean sapinst? or postinstallation steps?
Carlos

Similar Messages

Netweaver Initial Setup

Hi Gurus,
We installed a PI 7.11 on AIX and DB2, the instllation process finishes well but when we enter to the configuration Wizard to run the Netweaver Initial Setup this fails after request the passwords of users. Can any body tell me if we need something else to run the wizard?
Thanks
Aldo

Hi Zamir, this is the error:
The initial exception that caused the request to fail, was:
java.lang.StringIndexOutOfBoundsException: String index out of range: 10
    at java.lang.String.charAt(String.java:571)
    at java.util.regex.Matcher.appendReplacement(Matcher.java:704)
    at java.util.regex.Matcher.replaceFirst(Matcher.java:848)
    at java.lang.String.replaceFirst(String.java:2001)
    at com.sap.tc.lm.ctc.metamodel.util.StringUtil.decryptPasswords(StringUtil.java:48)
Thanks
Aldo

Configuration hanging at initial setup

Hi,
I'm trying to setup a Mac OS Leopoard Server and when enter all the inital information during the initial setup, a dialog box shows the status. Around I'd say 98% (yeah it's right at the near end, just a sliver left) the thing hangs. About 30 or so minutes it gives up and I forget the error message and goes back to restart the app (not the system.)
Tried zapping the PRAM, doing some console (single user) trick I found elsewhere to no avail. I do not have the disc to the OS, and I installed Tiger on another hard drive to see if I can peek into the Leopoard of any abnormalities.
Thoughts?

Make a note of the error message next time as that will help. In the meantime make sure the server is connected to a network ie: an ethernet cable to an active switch or router. In initial configuration of Leopard Server will fail if you don't do this as an active network connection is one of its requirements.
If this is the only server on your network make sure you have a clear idea about what your internal DNS Services are going to be and choose either Standard or Advanced. If this server is to be placed in an existing network (eg: a Windows Domain) which already has a mature DNS server configured and running then choose Workgroup instead after making sure relevant DNS records have been created for it and a fixed IP address has been reserved for its use.

Import error while running configuration wizard for ESR setup

Hi, I am trying for this for last two days. but not able solve this.
I am getting the error at the final stage of the configuration
Error message is below
Importing XI content
Description
Exception in step "INVOKEIMPRTCNTNT"
Exception details : com.sap.aii.util.misc.api.ResourceException: Connection to system Integration Builder using application CMS-Transport lost. Detailed information: Error accessing "http://INLD50046921A:50000/rep/cmstransport/int?" with user "ESRCMSCE1". Response code is 500, response message is "Internal Server Error"
I tried two or three times I got the same error then i canceled.
Now I am not able to start the configuration process gain.
Any body who has completed the configuration process please help me in this.
Regards
Satya

Hi,
I think the problem can be solved by downloading from the marketplace and importing the content manually.
Here is a description of the process:
http://help.sap.com/saphelp_nwesrce/helpdata/en/44/5755451622311ee10000000a155369/content.htm
The exception was because we didnt have the needed files (correct me if I am wrong) (The import can be done before or after running the configuration wizard)
Best regards,
V S

Initial Setup Problem - Starting the SLD Registration process

Hi,
we are installing our PI development system. During initial configuration with "NWA --> Configuration Management --> Scenarios --> Configuration Wizard --> Netweaver initial setup" the wizard stands still at Step 68 (of 561) "Starting the SLD Registration process".
We have restarted the system but after starting again the wizard it stands still again.
Same problem on our PI quality assurance system.
PI 7.11 on Windows 2008 R2 with MSSQL 2008 R2.
Steps of installation:
1) Installation of PI 7.11
2) Postworks ABAP (License, TMS, Profiles, rz04, ...)
3) Kernelupdate to 106
4) Updates SPS7 ABAP
5) Updates SPS7 JAVA
6) Run NWA Initial Setup with J2EE_ADMIN
Could someone help?
Thanks
Regards
Thomas Mühl

Then possibly the password was set wrong somewhere (since the "-" character is not blocked). Its advisable to check all service users passwords, to prevent other issues like this one to occur. Please check the OSS note "999962 - PI 7.10: Change passwords of PI service users" for more information on this.

PI 7.1 Configuration Issue - Configuration wizard -StringIndexOutOfBounds

Hi ,
I have installed the PI 7.1 EHP1 and started configuring it . The Configuration wizard step ( NWA-> Scenarios -> Configuration Wizard --> Initial Configuration (dropdown menu) -> NetWeaver Initial Setup ) is failing , I am getting the following error message . Can you please let me know if you have any thoughts on this issue ?
The initial exception that caused the request to fail, was:
java.lang.StringIndexOutOfBoundsException: String index out of range: 10
    at java.lang.String.charAt(String.java:571)
    at java.util.regex.Matcher.appendReplacement(Matcher.java:704)
    at java.util.regex.Matcher.replaceFirst(Matcher.java:848)
    at java.lang.String.replaceFirst(String.java:2001)
    at com.sap.tc.lm.ctc.metamodel.util.StringUtil.decryptPasswords(StringUtil.java:48)
    ... 83 more
See full exception chain for details.
Failed to process request. Please contact your system administrator.
While processing the current request, an exception occured which could not be handled by the application or the framework.
If the information contained on this page doesn't help you to find and correct the cause of the problem, please contact your system administrator. To facilitate analysis of the problem, keep a copy of this error page. Hint: Most browsers allow to select all content, copy it and then paste it into an empty document (e.g. email or simple text file).
For further information about the Web Dynpro error page, error analysis and a description of well-known error situations, see SAP note 1113811.

hi kris
You can connect to different SLD also. just you need to configure
follow the installation guide for PI7.1
https://websmp105.sap-ag.de/instguidesNWPI71
https://websmp105.sap-ag.de/instguidesnw
regards
sandeep

PI 7.1 initial setup problem

Hi,
While installing PI 7.1 I started the Netweaver initial setup. At step 338 i got an error message as follows:
"Error: ABAP technical system 'PI7 on nwpi71' not found"
Any idea how to I can solve this problem.

Just a quick question... Can you proceed past this step or does your install stop completely if this is not fulfilled?
The reason I ask is that this should either be done automatically by the install or if not then once the install is finished you have the oppotunity to create the technical and business systems as post config steps...
RZ70 is the transaction that you use to register the technical system

SAP PI 7.3 - initial setup Configuration wizard

Hi Experts,
While running the initial setup Configuration wizard.,facing the following issue.
Thanks in advance
Exception Class: com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException
Exception Message: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
Stack Trace
com.sap.tc.lm.ctc.metamodel.exception.ActionExecuteException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:144)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.remoteOrLocalExecution(ProcessControllerImpl.java:638)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessControllerImpl.execute(ProcessControllerImpl.java:272)
     at com.sap.tc.lm.ctc.metamodel.process.controller.ProcessExecuter.run(ProcessExecuter.java:156)
     at java.lang.Thread.run(Thread.java:679)
Caused by: com.sap.tc.lm.ctc.cul.api.CULServiceException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:61)
     at com.sap.tc.lm.ctc.cul.serviceimpl.executor.CULServiceExecutor.executeService(CULServiceExecutor.java:36)
     at com.sap.tc.lm.ctc.cul.serviceimpl.process.InvokeServiceControllerDefault.execute(InvokeServiceControllerDefault.java:133)
     ... 18 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.CPIServiceExecutionException: Not able to load Function PRGN_J2EE_CREATE_SERVICE_USER (cause:Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.).
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:107)
     at com.sap.tc.lm.ctc.cul.broker.BrokerServiceExecuter.executeService(BrokerServiceExecuter.java:59)
     ... 20 more
Caused by: com.sap.tc.lm.ctc.provider.abapconfiguration.exceptions.AbapConfigurationProviderBaseException: Function template destination RFC_TEMP_64 with properties:{jco.client.lang=en, jco.client.ashost=IIG151NW77, jco.destination.auth_type=CONFIGURED_USER, jco.client.cpic_trace=-1, jco.client.destination=RFC_TEMP_64, jco.client.user=DDIC, propertiesProvider=com.sap.security.core.server.destinations.provider.DestinationsProviderFrame, jco.destination.user_id=DDIC, jco.client.auth_type=CONFIGURED_USER, jco.client.sysnr=05, jco.client.type=3, jco.client.client=000} could not be retrieved.
     at com.sap.tc.lm.ctc.provider.abapconfiguration.connector.JCOServiceConnector.getFunction(JCOServiceConnector.java:97)
     at com.sap.tc.lm.ctc.provider.abapconfiguration.JCOServiceExecuter.executeService(JCOServiceExecuter.java:98)
     ... 21 more

Hello Vijay,
Please check user DDIC in client 000 - ensure that it exists, not locked and has the same password as in Integration Server client.
Regards,
Vadim

Error in configuring initial setup of "Configuration of ESR in CE"

Hello,
I have installed SAP NetWeaver CE 7.1 with ESR. But in wizard configuraiton execution of "Configuration of ESR in CE" it shows me the error "Importing XI Content" com.sap.xi.ctc.app file is not found.
I have gone through some Notes on the service market place, it says to configure this file manually in CE by using "Enterprise Service Builder". But the option what in note mentioned is not found in my enterprise service builder. The portal where these detail manual configuration steps are written is in PI 7.1.
Do I have to install PI 7.1 on the same server that CE configuration wizard finds the missing file??? or any other recommendation???
Regards,
Naeem

You don't need to install PI 7.1.
You need to download the content as mentioned in the weblog & upload it manually..
/people/werner.steyn/blog/2008/03/03/how-to-look-like-a-hero-with-netweaver-ce-esr-sr [Error: 2]
-SM

Error during Initial setup of functional unit Development Infrastructure

Dear All,
During the template installation of DI all-in-one (Initial setup of functional unit Development Infrastructure (DI all-in-one)) I get an error at Step 64/96 Upload Default ACL Settings.
Error: not a valid URL: unexpected character found [':' at position 7]
Step: Upload Default ACL Settings
Does anyone know how to fix this issue?
Kind regards,
Joost Christenhusz

Hi Lee,
I think I know how to solve this. I have just solved a similar problem with my PI 7.1 EHP1. Deployment in JSPM of various software components all failed like this example:
JSPM log:
Deploy status is 'Aborted'
Client path '
pi71\sapmnt\trans\EPS\in\SAPXIAF04_7-20002649.SCA'
Description:'1. ERROR CODE DPL.DS.5089 Exception during generating components of sap.com/com.sap.aii.af.app application in webservices_container container.
-> com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I'.
Default Trace:
Caused by: java.lang.NoSuchMethodError: com.sap.engine.services.webservices.espbase.configuration.BindingData.getConfigurationType()I
at com.sap.engine.services.webservices.server.deploy.WSBaseAbstractDProcess.getBindingDataId
After that most of the browser based admin apps, such as NetWeaver Administrator ( /nwa ), would refuse to start.
But finally after several tests, searching on SDN+SMP and restore to backup version I found the solution in [SAP Note 1328776|http://service.sap.com/sap/support/notes/1328776] which describes a similar problem: Update to the newest version of ENGINEAPI 7.11. Today this is ENGINEAPI04P_4-20002603.SCA.
You may also want to make sure that you are running the newest version of the Configuration Wizard, so you should check/update LMTOOLS, LMCTC and LMCFG*, currently LMTOOLS04P_3-20002705.SCA, LMCTC04P_1-20002694.SCA and LMCFG04P_4-20002729.SCA.
I hope this proves to be useful.
regards
Mauri

Error in configuring NWDI - by using configuration wizard

Hello,
I have installed CE 7.1 and like to install NWDI. It requires me to execute some configuration wizards from administratio tool of the NW CE server. I am following the configuration guide for NWDI and initiated a "Change Management Service (CMS): Create an Application Skeleton". It asks me to provide a CMS URL when I give it http://localhost:50000 or http://cmsmain.localhost:50000 it give me an error that CMS is not running or the URL is not correct like this.
I got to know that CMS is builtin in NWDI and NWDI is builtin in NW CE 7.1. How to check whether CMS is installed. Or any idea to configure the NWDI.
Regards,
Naeem Khan

Hi Alexander,
You may be right. I am installed trial version for the moment. But I have installed ESR as additional comoponent which I have downloaded from Service Market Place. Let's try!!!!!
But the problem is that I have seen there are several components If I go Support Packages and Patches" -->SAP NetWeaver" -->SAP NETWEAVER" SAP EHP1 FOR SAP NW CE 7.1" -->Entry by Component" NW Development Infrastructure
what for components should I require from this site??? and how to deploy them on my server??? Unlike ESR there are SCA files which I am not sure how to deploy them on my server!!! If you know please let me know.
Regards,
Naeem

What tasks I should select in NWA Configuration Wizard for PI component

Hello,
I'm in the stage of setting up the NetWeaver 2004S SR2. I've logged to the Net Weaver Administration console. According to documentation, to properly configure PI component I should execute Configuration Wizard task. The problem is that documentation is not very specific on what exact tasks I should execute, so I would like to get some advise from the community.
All tasks I can see are:
BI_00_This wizard will execute Postinstall steps of technical configuration of BI-Java Initial
DI_Allinone_This wizard run all post installation steps for DI, CBS, CMS and DTR. Initial
DI_CBS_This wizard run all post installation steps for CBS. Initial
DI_CMS_This wizard run all post installation steps for CMS. Initial
DI_DTR_This wizard run all post installation steps for DTR.
DI_This wizard sets the Oracle Parameters as per CSN note: 848708 Initial
MI_00_This wizard will execute Postinstall steps of technical configuration for the NetWeaver Mobile Infrastructures
MI_01_This wizard will create User and Assign Dedicated roles for the NetWeaver Mobile Infrastructure Initial
MI_02_create JCo Initial
MI_03_create TCP/IP
MI_04_register Connection Initial
MI_05_set profile in ABAP Initial
MI_06_schedule MI Job Initial
NWA_01_This wizard will execute configuration for local SLD Initial
NWA_02_SLD system : Connect SLD to CEN (if CEN present)
NWA_03_Creating a connection to the SLD and Setting required authorizations for SLD (CIM client settings)
NWA_04_Creating a connection to the ABAP stack of CEN and Starting heartbeat monitoring Initial
NWA_05_NWA system : Store access data per each managed Java system (optional) Initial
NWA_06_NWA system : Register each managed ABAP system to SLD Initial
NWA_07_creates Destination for Data Supplier Bridge
PI_00_This wizard will execute Postinstall steps of technical configuration for the PI Usage Initial
PI_01_This template checks if the necessary services are started Initial
PI_02_This wizard will test the BAPI call to SWF_XI_BPM_AUTO_CUSTOMIZE Initial
PI_03_This wizard will assign the Application roles Initial
PI_04_This wizard will Maintain_Technical_System
PI_05_This wizard will configure the integration server for sld Initial
PI_06_This wizard will create the necessary Destinations in ABAP Initial
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server
PI_07_Create_RFC_Destinations_in_Java Initial
PI_08_This wizard will Maintain Http Destination Initial
PI_09_This wizard will configure Role of Integration server Initial
PI_10_This wizard will Register_Queues_NA Initial
PI_11_This template services are started
I guess I need to mandatory execute PI_XX tasks, but what about others - do I need to execute anything else (I need only PI component to be installed and configured)? Not sure if that makes any difference, but this is the very first time I get into the NWA, so no previous configuration tasks were executed from the Configuration Wizard.
My full system configuration: NetWeaver 2004S SR2 ABAP+Java, Windows 2003 32-bit with MS SQL Server 2005.
Thanks in advance.

Hi Maxim,
Please follow this procedure:
1) Using Config tool Modify VM setting as per requirement (OS and H/W Dependent) Refer note 723909 Java VM settings for J2EE 6.40/7.0.
2) To set Environmental Variable refer Note 314530 - Number of RFC/CPIC connections for external clients. These parameter should be taken care while installing templates
Set these:
     1) gw/max_conn 2000
     2) gw/max_sys 1200
     3) gw/max_overflow_size 40000000
     4) gw/max_shm_req 200 (this is to adjust the memory   allocation)
Profile parameters
rdisp/tm_max_no 5000
rdisp/max_comm_entries 200
ITS
CPIC_MAX_CONV 5000(Should be taken care that it should be set for <sid>adm user
3) Installing Template
Go to home page
http://hostname:portnumber/webdynpro/dispatcher/
Click Deploy and change
4) After This Click Configuration tab and then click Install
For the next tab select scenario PI
And configure template and finally install
5) In case you face any problem while importing please read these notes for altering parameters
Note 314530 - Number of RFC/CPIC connections for external clients
Note 923359 - Collective Note: Configuration Wizard - Template Installer
Hope it will Help you at this stage at development stage
You need to import SAP BASIS Software Component Version into Integration Repository based on your SP Level & XI or PI.
You need to download it from [service market place.|https://websmp205.sap-ag.de/~form/handler?_APP=00200682500000001943&_EVENT=SEARCH&HIDE=&SEARCH_SPAT=X&SEARCH_BPAT=X&SEARCH_CD=X&SEARCH_P=X&SEARCH_PV=X&SEARCH_C=X&SEARCH_CV=X&SEARCH_TA=&SEARCH_V=&HIDE_EXPERT_SEARCH=X&SEARCH_MAX_RESULT=20 ]
Regards,
Gagan Deep Kaushal

System exception running Configuration Wizard after installing several security updates for SP

Greetings,
Have a 2 server farm, SharePoint 2013 SP1, SQL and SharePoint. Windows Update has 15 updates downloaded and ready to install, 2 Server 2012 updates and 2 SharePoint updates, 11 Security Updates for SharePoint. So, I said yeah, go ahead and install them late
last night when I figured it wouldn't interrupt folks. (dumb move)
Windows Update took awhile, but no errors during the install. Rebooted the server as required. Once the server was back, jumped onto the server console and ran the Configuration Wizard to apply the updates to SharePoint. No problem, progressed through the
screens saying it was going to update, farm and sql information, etc. Config Wizard was going through the steps, then failed with the message: "Failed to register SharePoint services." and here's a link to the configuration log so have a jolly time
tracking it down, thank you very much.
I found the error in the log (down about 10,000 lines):
04/10/2015 03:00:02 12 ERR Task services has failed with an unknown exception
04/10/2015 03:00:02 12 ERR Exception: Microsoft.SharePoint.SPException ---> System.Runtime.InteropServices.COMException: <nativehr>0x80131904</nativehr><nativestack></nativestack>
at Microsoft.SharePoint.Library.SPRequestInternalClass.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
--- End of inner exception stack trace ---
at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx)
at Microsoft.SharePoint.Library.SPRequest.GetListsWithCallback(String bstrUrl, Guid foreignWebId, String bstrListInternalName, Int32 dwBaseType, Int32 dwBaseTypeAlt, Int32 dwServerTemplate, UInt32 dwGetListFlags, UInt32 dwListFilterFlags, Boolean bPrefetchMetaData, Boolean bSecurityTrimmed, Boolean bGetSecurityData, Boolean bPrefetchRelatedFields, ISP2DSafeArrayWriter p2DWriter, Int32& plRecycleBinCount)
at Microsoft.SharePoint.SPListCollection.EnsureListsData(Guid webId, String strListName)
at Microsoft.SharePoint.SPListCollection.get_Count()
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.get_HealthRules()
at Microsoft.SharePoint.Administration.Health.SPHealthAnalyzer.RegisterRules(Assembly assembly)
at Microsoft.Office.InfoPath.Server.Util.HealthAnalyzerRegistration.RegisterHealthRules()
at Microsoft.Office.InfoPath.Server.Administration.FormsService.Update()
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServiceInConfigDB(Boolean provisionTheServiceToo, String serviceRegistryKeyName)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.InstallServices(Boolean provisionTheServicesToo)
at Microsoft.SharePoint.PostSetupConfiguration.ServicesTask.Run()
at Microsoft.SharePoint.PostSetupConfiguration.TaskThread.ExecuteTask()
So I've been searching around trying to find a clue about this. I tried using PSConfig as well, no dice. I tried using my admin account, the farm account, and the initial setup account, no dice. So I gave in about 3:00 AM and took a break, rather than have
my head hit the keyboard. Left IIS down and SP down. Had some help this morning when someone started things back up for me. sigh. So the users have been in on the sites and doing all sorts of important and critical things, so rolling back to the last
backup is the last, last resort. (Fortunately, I did do a manual backup using a PowerShell script before starting all this.)
Help. Please.
The actual sites are up and seem to be working fine. Central Admin is down though, get a 500 Internal Server Error in the browser, so things aren't correct. Duh. The config wizard didn't finish.
Thanks much,
Steven

0x80131904 translates to COR_E_SqlException. Typically this will be an MDF/LDF file out of space, or the volume that those files reside on being out of space. Check that first, then also check the SQLERROR log file for any issues.
Trevor Seward
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

NWDI Configuration Wizard.

I am currently following the steps in the "Configure NWDI in MII" and I am getting an error message in the initial stage of the installation.
I have navigated to http://<server>:<port>/nwa/cfg-wizard and I have clicked on Initial setup of functional unit SLD.
I selected typical configuration and entered my pwds.
I selected Setup a new local SLD server and used my server as the ObjectServerName
It fails after I press Next. the following is the error...
Error: Notification
Error: Connect to message server host failed
Connect_PM TYPE=B MSHOST=dixon.apex.ray.com GROUP=RPD R3NAME=RPD MSSERV=sapmsRPD PCS=1
ERROR       service '?' unknown
TIME        Wed Jan 26 10:26:35 201
RELEASE     711
COMPONENT   NI (network interface)
VERSION     39
RC          -3
DETAIL      NiErrSet
COUNTER     2
Step: Create group SAP_SLD_DATA_SUPPLIER
Retry StepSkip StepCancel Process
What is wrong with the configuration or what should I be looking at to correct this?

Hi,
I belive this has no NWDI relation so far.
I think you need to ask around in a different forum what is wrong when accessing the message server:
Error: Connect to message server host failed
Connect_PM TYPE=B MSHOST=dixon.apex.ray.com GROUP=RPD R3NAME=RPD MSSERV=sapmsRPD PCS=1
Best Regards,
Ervin

Error Configuration Wizard-NW CE 7.3 ;BI-ABAP

Hi All,
I have launched the Configuration Wizard with the task "BI Initial Setup for ABAP", in the step 7 appear this error: "Exception during the import profile"
Log :
1- Error : Column: 'SOBI_RFC_DEST' not part of the table (com.sap.tc.lm.ctc.provider.vmaprovider.util.VMAUtil)
2- Error : There is already such a row - with key columns:[Ljava.lang.String;@454fec43;and key column values:[Ljava.lang.String;@2204642; in table-RSADMINC. AN UPDATE ACTION WILL BE PEFRORMED!
--> JCO Destination is running
--> RFC Destination is working :
I already done authorization issue for System-User!
PS: I have two different Server, one of those SuSe NW CE 7.3, another one Windows 2008R EHP 2
BR

Hi,
Please double check the JCO user and the authorization.
Or
Apply these two notes, it should resolve ur issue
1493124 CTC: Check table existence before table whitelist
1471762 CTC: Automated Configuration:
Hope this helps u.
Best Regards
Vijay K

PI7.1 Configuration Wizard NetWeaver Initial Setup

Similar Messages

Maybe you are looking for