PI7.1 - Resource Not Found - Message Mapping
Hi,
We have transported one software component objects from Dev system to QA system.
The IR and ID objects transported successfully.
The SWCV consist of one namespace, imported idocs, datatype,msgtype,service interface,msg-mapping,operation mapping - we are using PI7.1.
The scenario is R/3 --> PI7.1 ---> Sql-Server.
The QA is recently configured and this is the first transport we did.
The problem we are facing is when the R/3(QA) system sends idocs it fails at PI msg-mapping.
The error is :
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">RESOURCE_NOT_FOUND</SAP:Code>
<SAP:P1>88b619e0-b4ec-11dd-8914-fd220a9b803a</SAP:P1>
<SAP:P2>http://abc.com/pi/sbasu/saptosql</SAP:P2>
<SAP:P3>com/sap/xi/tf/_MM_SYPM_BlendRecipe_WCD_To_WLS_.cl~</SAP:P3>
<SAP:P4>-1</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Unable to find resource 88b619e0-b4ec-11dd-8914-fd220a9b803a in the following software component versions: http://abc.com/pi/sbasu/saptosqlcom/sap/xi/tf/_MM_SYPM_BlendRecipe_WCD_To_WLS_.cl~-1</SAP:Stack>
I have imported the inbound payload and generated a test instance - the mapping executed successfully.
Can anyone have any idea why the problem occurs and what could be the solution ?
Regards,
Sanjib
Hi,
Close the duplicate thread and check the link
Re: PI7.1 stack 6 - RESOURCE_NOT_FOUND
Thanks!
Similar Messages
-
Error Message: Resource Not Found, Unable to Load SyncUICoreLocalized.dll
I'm having trouble syncing my iPhone 4. I get an error message that says: Resource Not Found, Unable to load SyncUICoreLocalized.dll. This is preventing me from transferring my information from my old phone to my new iPhone 5c. Can anyone help me??? A simple restart of the computer did not solve the problem.
Thanks :-)I found a thread of people having the same problem, and a suggestion by stanalet solved my problem! Thanks stanalet!
-
Need some help, I was downloading an album when the message "could not complete itunes store request, requested resource not found." "Error in the itunes store please try again later." My account has been deducted for the amount of the album, but I dont have it downloaded on my computer. Please help!!! Thank you!!!
Does the purchases show in your Purchased list?
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"? Ones with a green checkmark are solved.
Next contact iTunes by:
Contact iTunes -
Outlook for mac, message HTTP error resource not found 18596
outlook for mac, message HTTP error resource not found 18596 really strange and outlook is connected and as soon as you send a mail you suddenly get the message, really annoying actually, seems to be an old problem!!!
Help appreciated!!!!!!!!Same probelm any suggestions ????
-
Error message stating "Network resources not found"
I distributed a form and now I am receiving a message stating "Network Resources Not Found". What can I do? Nothing has been changed since the form was distributed and the "help person" was no help when talking to them.
The forms are saved on my personal computer and they have not been moved since they were created. The form was given an open access so that anyone could access and complete/submit the form. It had been working perfectly until Tuesday when the error message started to appear.
-
Recently upgraded PC with latest edition of iTunes (1/30/2014), afterwards, received this error message while attempting to sync iphone with PC: Unable to load, resource not found, SyncUICoreLocalized.dll
THIS HAS EVERY APPEARANCE OF A SOFTWARE GLITCH BY APPLE ... So first suggestion is NOT to begin reinstalling various software but to await some answer & fix from Apple. Too many have same problem on various systems, in my view (I am not an Apple rep but have certainly faced many glitches over the years).
PS - LOTS of Apple software problems these days, including many people having their Contacts shredded. What's going on with Apple? -
Getting 104 resource not found error, when deploying my first servlet
Hi,
I am new to servlets, and after doing little home work i have created a small servlet but i am i getting http 104 resource not found error.
steps i followed:
1) installed pre-configured version of tomcat from http://www.coreservlets.com/Apache-Tomcat-Tutorial/.
2)created new directory called ch1 under webapps, created WEB-INF under ch1
3)included web.xml, classes in WEB-INF directly
<?xml version="1.0" encoding="ISO-8859-1"?>
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_5.xsd"
version="2.5">
<servlet>
<servlet-name>Ch1servlet</servlet-name>
<servlet-class>Ch1servlet</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Ch1servlet</servlet-name>
<url-pattern>/servlet</url-pattern>
</servlet-mapping>
</web-app>
4) included .class file under classes folder from following Ch1servlet.java file, I have set class path to point to servlet-api.jar file and jsp-api.jar and compliled following java file to get .class file which is included in classes folder
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
public class Ch1servlet extends HttpServlet
public void doGet(HttpServletRequest request,HttpServletResponse response)throws IOException
response.setContentType("text/html");
PrintWriter out=response.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+
"<body>"+
"<h1 align=center>HF\'s Chapter1 Servlet</h1>"
+"<br>" + today + "</body>" + "</html>");
5) I am started tomcat server and when typed http://localhost( changed port from 8080 to 80), its giving tomcat page and not showing any error
6) When i typed http://localhost/ch1/servlet/Ch1servlet, its giving http 404 error
type Status report
message: /servlet/Ch1servlet
description: The requested resource (/servlet/Ch1servlet) is not available.
7) i have uncommented(it comes preconfigured) the invoker part in web.xml.
I have tried including servlet in an package and without package
I am not sure if its problem with server configuration orelse problem with my file placing.
Please let me know if you have any idea what went wrong.I found this, unable to copy it, so i am typing it:
Feb11,2008 11:55:57 AM org.apache.catalina.core.AprLifecycleLIstener init
INFO: The Apache Tomcat Native Library which allows optimal performance in production environemnt was not found on the java.library.path:c:\program Files\Java\jdk1.6.0\bin;....
last line says
org.apache.cataline.startup.catalina start
INfo: Server startup in 657ms -
Hi,
I am fairly new to the LV Project method of building executable files and embeded applications.
I have been using LV 7.2 for the last few years and finally switched over to 8.2 this last summer.
My problem is that I have an embedded application that I need to troubleshoot, but every time I try and run it from my desktop, it hits me with one of these messages:
Deploying MPPT-Testbed (successfully deployed target settings)
Deploying ErrorConvert.vi (already deployed)
Deploying FP Close(IO).vi
Failed to download FP Close(IO).vi
LabVIEW: Resource not found.
LabVIEW: Resource not found.
The FP Close(IO).vi is the latest issue, I have had other files that have failed to load as well. I have attempted to make a common folder for all of my shared VIs, I have 6 FP-2000 controllers.
Any ideas?
I run LV 8.2 w/RT on my desktop, my FP-2000 is running LV 8.2, FP Drivers 5.2.0 and FP VI Manager 4.1.0
-BillHi Bill,
Since you produced code in a previous version of LabVIEW, and therefore previous FieldPoint driver version, you will need to revamp your code a little to be able to use it in LV 8.2 with FieldPoint 5.0. I'm assuming that the FP Close.vi is not available in the palette that is not available in LabVIEW 8.2. This is expected, as FieldPoint 5.0 utilizes different VIs than previous versions. Accordingly, you do not need to use the FP Open or FP Close VIs, as they are not available in this driver version. However, you only need to use a Browse I/O Point and either a FP Read, FP Write or FP Read/Write. Generally, a quick modification of your code will take care of this problem. Let us know if you need help with this; a screenshot of your code might be helpful. Thanks!
Amanda Howard
Americas Services and Support Recruiting Manager
National Instruments -
While running servlets getting errors 404 or 505 resource not found
Hi all,
I'm novice to J2EE.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
Now let me elaborate what i've done till now.
My webapplication folder structure is : C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\classes\Sai\ServExamp.class
My servlet is ServExamp.java
I created a folder called "Suresh". In that folder created another folder called "WEB-INF". In WEB-INF created a folder called "Classes".
Since my servlet is in package "Sai", the .class file reside in \Suresh\WEB-INF\Classes\Sai\ServExamp.class
The source code is :
package Sai;
import javax.servlet.;*
import javax.servlet.http.;*
import java.io.;*
public class ServExamp extends HttpServlet
public void doPost(HttpServletRequest req,HttpServletResponse res)throws IOException
PrintWriter out=res.getWriter();
java.util.Date today=new java.util.Date();
out.println("<html>"+"<body>"+
*"<h1 align=center>HF\'s Chapter1 Servlet </h1>"*
+"<br>"+today+"</body>"+"</html>");
Now i'm almost done creating a web application. Next, I constructed a simple web.xml descriptor that gives a web friendly name for my servlet, and points to the servlet. I constructed web.xml descriptor file in the WEB-INF folder (C:\bea\user_projects\domains\mydomain\applications\Suresh\WEB-INF\).
The web.xml file source is :
*<!DOCTYPE web-app*
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
*"http://java.sun.com/dtd/web-app_2_3.dtd">*
*<web-app>*
*<display-name>Hello World Web Application</display-name>*
*<description>Test Servlet</description>*
*<servlet>*
*<servlet-name>ServExamp</servlet-name>*
*<servlet-class>Sai.ServExamp</servlet-class>*
*</servlet>*
*<servlet-mapping>*
*<servlet-name>ServExamp</servlet-name>*
*<url-pattern>/Suresh</url-pattern>*
*</servlet-mapping>*
*</web-app>*
Now I have told Weblogic that the URI /Suresh corresponds to my servlet "Sai.ServExamp".
My Web Application is ready to be deployed at this point. I logged onto Weblogic's admin console,
*1) clicked on deployments, then navigated to "Web Application Modules" .*
*2) Clicked "Deploy new Web Application Module"*
*3) Navigated to the location of your web application folder (Suresh). There was a radio button next to it indicating that I can select that folder as a valid web application.*
*4) I Clicked that radio button and clicked "Target Module".*
*5) It informed that my web application "Suresh" will be deployed to myServer.It asked a name for my web application deployment. By default it was "Suresh"*
I clicked Deploy.
*6) After deployment, my web application "Suresh" appeared in the "Web Application Modules" tree on the left.*
I Clicked on "Suresh"( my web application) then clicked the testing tab, then clicked the link shown there(http://localhost:7001/Suresh-2).
It was not showing my servlet (showed a 403 error)
Error - 403
This status code is commonly used when the server does not wish to reveal exactly why the request has been refused, or when no other response is applicable.
I think so it came b'coz I don't have an index.html or index.jsp page.
*7)Instead,I added my servlet on to the URL it provided.*
http://localhost:7001/Suresh-2/Suresh
It is showing these error code: Http: 505 resource not allowed
The page cannot be displayed
The page you are looking for cannot be displayed because the address is incorrect.
Please try the following:
If you typed the page address in the Address bar, check that it is entered correctly.
Open the localhost:7001 home page and then look for links to the information you want.
Click Search to look for information on the Internet.
when i just type : http://localhost:7001/ -> Error 404 not found error
it's showing
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
*10.4.5 404 Not Found*
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I want to run my web application & any help would be appreciated.
Thanks in advance.
with regards,
S.SayeeNarayanan.
Note: I even deployed my war file, which i got by execution of (jar cv0f webapp.war . ) command from the root directory of my web application i.e. Suresh
Then executed my webapplication it is showing
error-505 resource not allowed.
--------------------------------------------------------------------------------------------nammathamizhan wrote:
Hi all,
I'm novice to J2EE.
You're also a novice to this forum.
First, turn off the bold font.
Second, post your question once and only once to a single forum. You only waited an hour before reposting your question. That's not the way this works. Asking your question multiple times will not increase the likelihood that you''ll get an answer. As a matter of fact, you're guaranteed nothing at all. Give it your best effort and hope for success. This isn't a paid consultancy - we're volunteers.
I've encountered a problem while accessing the deployed module in weblogic 8.1 server.
I'm sure that the webapplication module is deployed as i saw my module in administration console & also the status said that it is deployed.
when i access my web application by specifying the proper server and port no and context root it is showing
either 505 - resource not found error(http://localhost:7001/Suresh-2/Suresh) or 404 - not found error.( http://localhost:7001/Suresh-2/Suresh)
If you're correct, and it's deployed, that would suggest that the URL you gave is incorrect.
>
Now let me elaborate what i've done till now.Good info - almost too much.
% -
BI IP - Upload flat file - "requested resource not found" when typing URL
Hi,
we tried to implement the "upload flat file" functionality (blog Marc Bernard). We followed the different steps and included the bug fixes as well. When we want to launch the URL in an internet explorer session we get message "requested resource not found".
Hereby the URL used:
http://sapscmbid.vpkgrp.int:50100/sap/bc/webdynpro/sap/zrsplf_file_upload?sap-language=EN&planning_sequence=FILE_SEQ&show_messages=WEXA
Do you know what we did wrong? We would like to finish this by the end of this week ...
kind regards
DHi,
when we use URL http://sapscmbid.vpkgrp.int:50100/ we see the screens of the portal so I presume this server and port is accurate (we use the same link for the planning modeler and this works fine).
The SICF service zrsplf_file_upload has been imported and has status active. Should we check other things as well?
D -
Error: Resource not found in FilterOptionCollection. Please help
Hi Experts,
I'm currently implementing Approve Requests at a customer.
I've got the service TASKPROCESSING pointing to ERP_WF. I can see the catalog SAP_FND_TC_TX1 and I've created a tile, pointing to my scenario as defined in the netweaver gateway.
When I go to launchpad the reference error message is displayed.
Details on the word file.
Error Resource not found Filter Option Collection - Approve Requests.docx - Google Drive
Thanks in advance!Thank you Andre,
We finally solved it. I post the correction for future reference.
The problem was solved by changing the configuration on the assignment of the data provider to the data model.
ZTM_TGW_SVC_MODEL_0001_BE software version was DEFAULT, when it should've been /IWPGW/BWF.
The route in SPRO is: SAP Netweaver->Gateway>OData Channel>Administration>General Settings> Assign Data Provider to Data Model. -
CNA 6 InstallShield Wizard will not install with a JVM not found message
I ran CNA 5.5 up until last week when Java 7 71 update hit. When I tried to launch, I received JVM Not Found, that was all. So I figured it was time to install CNA 6, however during the install process I now get a pop up box stating InstallShield Wizard will not install with a JVM not found message. No other error messages, no logs, and the installation ceases. Tried installing CNA 5.8.9.1, and CNA 5.5 again, all stop at the same point with the same message. Anyone else see this issue?
When you start Network Assistant, Java determines whether the resources it needs are available. If they are not, Java displays the message Could not create Java Virtual machine, and the session ends. To overcome this problem, open the file C:\Program Files\Cisco Systems\CiscoSMB\Cisco Network Assistant\startup\startup.properties (the default installation path), and modify this entry:
JVM_MAXIMUM_HEAP=1024m
Replace 1024m with a lower setting that does not exceed the available RAM. There is no way to foresee what value will work. Try 512m , and lower it further if necessary. You can use the dial peer tag range 2500 to 2999 out-of-band to define your own dial peers.
If the Network Assistant InstallShield wizard fails to start, it is likely that the temporary folder location defined through the environment variables TMP and TEMP has some problem. Assigning a correct temporary folder location can fix such problems.
Source: http://www.cisco.com/c/en/us/td/docs/net_mgmt/cisco_network_assistant/version6/relnotes/ol32368.html#pgfId-840748 -
ISE Guest Portal - Error Resource not found
Hello,
When I create a guest user through the sponsor portal, then try to login with this guest user through the Guest Portal, after I press login button, the following error message occurs and do not know what to do to solve.
Error: Resource not found.
Resource: /guestportal/
None of the messages on the forum about it helped me to solve the problem.
I am using ISE 1.1.3.124 and this is a new re-image appliance.
Can anyone help?Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again. -
Error: Resource not found: ${SCRATCH_COMMAND_ICON}.
Hello ,
I have just installed SQL Devloper Version 4.0.0.12 [Build MAIN-12.27] on on windows7-64Bit machine.
I just observed following error on Extensions log window.
-oracle.sqldeveloper.migration.application
Error: Resource not found: ${SCRATCH_COMMAND_ICON}
Note: I already had delppoyed Oracle SQL Developer 3.2 Release
when i double click the error its taking me to extension.xml line : <property name="SmallIcon">res:${SCRATCH_COMMAND_ICON}</property>
and i see "java.io.PrintWriter@57fff4da" line in Messages-Log window.
Hope this error doesn't create any problem. Any Idea ?Getting the same error, and I am trying to use the database migration tool.
Under the Extensions Tab:
oracle.sqldeveloper.migration.application
Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
Warning: Can't find bundle for base name oracle.dbtools.migration.gui.AppScanarb, locale en US
Error: Resource not found: ${SCRATCH_COMMAND_ICON}.
Message was edited by: dbcapoeira -
ISE Guestportal login action resource not found
I'm setting a new ISE for guest webauth. I'm getting indicated message when I try to login as a Guest.
I'm missing something?
Regards.Adding additional info:
I'm running ISE 1.1.1.246
The error apeears before the login screeen. I got a certificate warning, and when I do continue I got the error
Error: Resource not found
Resource: /guestportal/Login.Action
Maybe you are looking for
-
Cannot delete movie file from iTunes
After converting movie file via Quicktime and adding it to the iTunes library, I am not able to remove it anymore. If you try to delete it, it crashes iTunes and after that all desktop icons are frozen. The movie does not play in iTunes, you cannot e
-
No need to Install antivirus for Mac?
We no need to Install Anti Virus for Mac Book? If NO ,How to scan data when Insert external HD? If YES ,Do we have any good antivirus sw for mac? Thanks in advance
-
.
-
Logic 9.1: hitting stop I often get Logic hanging up
On some point of the song, hitting stop, Logic hangs up like an old LP.. Any other encounter this issue? All is fine on L8 and 10.5.8
-
I was updating app and they froze and never finished the update and know I can't delete neither used the app, how can I resolve this?