PI7.11 - Integration Directory

I'm trying using PI7.11. Trying to create this scenario, ECC<-(SOAPadapter)->PI<--
(JDBCadapter)----->OracleTable.
I've got all the design objects built correctly along with the SLD products and all.
I'm in ID now where I created
2 business systems for source and target.
1 sender soap channel (synch)
1 JDBC Receiver channel
Then I created ICO (Integrated Configuration Objects) where all the information have been filled in Inbound Processing, Receiver, Receiver Interfaces, Outbound Processing, Assigned Users (left blank) tabs.
When I do a test ( Tool-->Test Configuration) from the ID, I get this error (below). I checked all the tabs in ICO including Receiver, Receiver Interfaces and Outbound Processing and they seem to be correct. Any idea?
Receiver Agreement

When I do a test ( Tool-->Test Configuration) from the ID, I get this error (below). I checked all the tabs in ICO including
Receiver, Receiver Interfaces and Outbound Processing and they seem to be correct. Any idea?
Test the scenario end-to-end.....when using ICO you cannot do testing in this manner.
In PI7.11 I only need to create Integrated Configurations, correct?
Objects can even be created separately...manually or by using Config Wizard....use ICO if it is required in your project.
Regards,
Abhishek.

Similar Messages

Integration Directory APIs in PI7.1

hi,
I am trying to read/access the content (objects) of integration directory using the APIs.
this feature is available in PI7.1.
I saw the documenation
[http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6ef92455d66a58e10000000a11466f/content.htm]
and
[http://help.sap.com/saphelp_nwpi71/helpdata/en/46/6dca42e5c269dfe10000000a11466f/content.htm]
It says:
Open the external definition CommunicationPartyService in the software component version SAP BASIS 7.00 in the namespace http//sap.com/xi/XI/System
In the navigation area expand the node SAP BASIS u2192 SAP BASIS 7.00 u2192 http://sap.com/xi/XI/System u2192 External Definitions.
In my ESR, i can see the namespace http//sap.com/xi/XI/System under swcv SAP BASIS, but the external definition CommunicationPartyService is not present.
Has anyone tried accessing the ID objects thru APIs. would it be possible to access without the CommunicationPartyService external definition.
any comments appreciated.
thanks,
Ganesh

the blogs
Directory API Development - Part 1 of 3
Directory API Development - Part 2 of 3
Directory API Development - Part 3 of 3
were helpful.

Integration Directory view by scenarios PI 7.1

Hi all.
In Integration Directory PI 7.1 in navigation area i have only 2 page: Objects and Change List.
In old system 7.0 i have 3 page: Scenarios, Objects and Change List.
How show in 7.1 page Scenarios there object grouping by scenarios.
Regards
Max

In addition to the FOlder option you also have the Configuration Scenario option present in PI7.1......there has been no deletion in the type of objects created....
Right-click---> New ---> Administration ---> Configuration Scenario.....
I hope this is what you are looking at!
Regards,
Abhishek.

Testing the connectivity between Integration Directory& Integration Reposi

Hi Experts,
I am verifying the configured PI7.0 server,but i am not able to fine the Integration scenarios at the stage :
(Testing the connectivity between Integration Directory and
Integration Repositor)
In Integration Directory Configuration screen when i click on tools----
>Transfer Integration Scenario from Integration Repository.
it is displaying the dialog box with question mark sign,when i click this sign it is displaying another dialog box adn displaying as NO OBEJCTS FOUND.
So can any body help me in this matter. with detail procedure with steps in sequence order.
I appreciate the accurate and soon reply
Thanks in Advance
regards
Ken

> Hi Barry ,
>
> Thanks for the Immediate reply.
> Could you pls send me how to create BPM in IR with
> step by step
> Then how to call that in ID.
>
> Please send me the detail procedure with steps.
>
> Thansks in Advance
>
> regards
> ken
You do not need to do that. Import the BASIS and ABAP Content, and these are already included.
Why work harder than you need to
If you want to create a BPM, then follow one of the how to guides:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40697f5e-088d-2910-6592-cefedf19860e
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/d46b9b90-0201-0010-ef92-9964c1bc98e1

Refresh System Data in Integration Directory PI 7.11

Hey,
I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
anymore.
Can anybody help?
Thanks!
Michael

I have setup a new technical system and a business system in SLD, but now I still can't find it in Integration Directory.
I knew from the later PI Version, that there was an option to transfer SLD data to integration directory, but now I can't find it
Tools (or right-click in ID) --> Assign Business System --> follow the wizard...it will assign the business system from SLD to ID

Creating business services in integration directory

Hi
When business services are created in integration directory - these business services are not tied back to entries in the SLD - i.e we can create entries for business services directly in integration directory without having to import them from SLD.
Now, when we migrate - from Dev environment to other landscapes - my understanding is that these business service entries are going to be migrated with the same names -and no transport target entries / validations is made during the target system import time - which happens in case of business systems having entries in SLD....
Could anybody out there - clarify these thoughts about business service entries
Thanks in advance - for your time .

Hi Karthik,
Check out these help file links, hope this will help you:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/fe/131eb4ef2fb344abf471c9eac0063a/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/c7/301640033ae569e10000000a155106/frameset.htm</a>
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm">http://help.sap.com/saphelp_nw2004s/helpdata/en/7d/6b82cd0d1aef48ab5953524c9cc5b2/frameset.htm</a>
http://help.sap.com/saphelp_nw2004s/helpdata/en/e6/908d3f7057eb0ce10000000a114084/frameset.htm]
Regards,
Subhasha ranjan

Basis: No service for system , client in Integration Directory??

Hi All,
IDocs from SAP QA are not being sent to PI QA. I see error in SM58 in SAP QA as: No service for system , client in Integration Directory. Please dont jump to asnwers by looking at above error. I could fix that, but thats not the real problem.
Because I have checked
1) SLD home page ---> Technical Landscape --> Select Web AS ABAP --> Select the technical system --> Clients ---> Click on the client used as Business system --> Here look for the logical system is defined (No Problem here, as logical systems is defined).
2) ID---> Click on Objects --> Service Without party/Party > Double click on business system>On the tright side--> Service --> Adapter specific Identifiers ---> Check IDoc Adpater, Logical System (No Problem here as I see Logical System).
But I can't find values R/3 System ID and Client under "IDoc Adapter and RFC Adapter". I think thats problem here, when I click on "Compare with SLD" in edit mode, values are not getting populated into R/3 System ID and Client. It makes think there is communication error from ID to SLD. How I do confirm if its the real problem?
3) Checked Note 940313 - IDoc adapter: Error messages in SM58, No problem here
4) Did SLDCHECK from PI QA, works fine, no problems here
Both PI DEV and PI QA pointing to the same SLD. When I send IDocs from SAP QA to PI DEV, everything works fine. I can't send IDoc from SAP QA to PI DEV (changed RFC des to point to PI QA, it shouldn't be a problem).
How do I find out if communication between PI QA - ID is workign fine with the SLD? Is there any other issue you can think of causing the above error?
Thank You,
Indrasena Janga

*I have trobleshooted a similar issue. In my case also the tRFC failed with the error "No service for system SAP, client 400 in Integration Directory".There were 11 IDOCS associated with this tRFC and when I saw control record of first IDOC,in sender information ,the sender partner number was wrong.Instead of "SAPSID",it was found as just "SAP".Where as the remaining ten were maintained with correct sender partner number.remaining ten IDOCS were dependant on first one.
Thanks,
Varada Reddy

Importing new business systems into Integration Directory PI 7.1

Team SDN,
Team We have presently upgraded to PI 7.1(inline upgrade XI 3.0 was the older version). There are some changes like Import of software component version from SLD to ESR. intially we use to do in Xi 3.0 by selcting tools and import, but now we have to do different manner like going to ESR click on new and under work areas we have SCV. Do we have any new procedure fro importing business system into integration directory PI 7.1.
Please share with members if wht are the new changes in PI 7.1 work proceses like the one i mentioned above importing SCV(please don't start ESR and blah blah) any real issues wht we will encounter in termsof PI 7.1
Thanks SDN.

Hi Madhu,
If you want to create a communication component for a business system from the System Landscape Directory (SLD), choose the Business System menu option.In the wizard, select a business system from the SLD and create a communication component for it in the Integration Directory.
refer below link..
http://help.sap.com/saphelp_nwpi71/helpdata/EN/3e/60653f0c9fa075e10000000a114084/content.htm
Regards,
Raj

Integration directory is not getting displayed..

Hi Gurus,
Our developers are facing an issue here- they are not able to view the Integration Directory (ID) window with their own ID's as well as PISUPER. They are able to view the same instance ID from a different server. But I'm able to view to ID from my machine. When they key in their login credentials in the integration directory, after which a window will be opened and that they cannot see it.The process and the application keeps running in the windows task manager. Is this sort of a display problem or something?
Any thoughts would be appreciated!
Regards,
Sriram

Hi,
Also make sure they are have JDK1.5 and not any other version installed. Try to delete your temporary Java files on your PCs and do the re-initialization Raj mentioned, and try again. You can also enable Java console from control panel to see where you're getting stuck.
Regards,
Gökhan

Unable to Load the Integration scenario into the Integration directory

Hi All,
I am new to using SAP XI.
Require your help on the following issue.
I have built an Integration scenario, added Component Type: Product Version, inserted actions and connections.
I did check for any errors. I found no errors.
When I am trying to load this scenario into the Integration directory its not showing up the scenario in the popup.
Navigation:
Directory > tools> Transfer scenario from repository
The status of Integration Scenario in the builder shows as
"Being processed".
I created the scenario 2 days back.
Can some one help me in this?
Regards,
Meher

Hi All,
Thanks to all who helped me.
michal,divija : Can you please let me know in details how to activate Business Scenario?
I did not create any business process.
Sridhar: I did releases some locks on my process, no luck.
Can you please explain me in more details?
Should I have a process build for my Integration scenario to be activated?
Thanks,
Meher

Error while assigning Business Systems in Integration Directory

Hi,
I'm getting an error when trying to assign the business systems in the integration directory.
The error i'm getting exactly is "access to object list of type BusinessSystem using the internalEOAService BusinesSystemAccessor failed " .
I've cleared the SLD_cache and checked it but the same error.
The business systems are appearing when i tried the transaction code SLD_CHECK and is in green status.
what might be the error.

Hey
just want to make sure,are u using communication channel with party or without party.
also make sure that user has sufficient authorizations
http://help.sap.com/saphelp_nw04/helpdata/en/c4/51104159ecef23e10000000a155106/content.htm
Thanx
Ahmad
Message was edited by:
Ahmad

XI Error in Integration Directory adapter list is not display.

Hi All,
We are getting following error message while creating communication channels in Integration directory. More over we have attached error log file with this message.
ERROR :-
u2022     Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://xxxxx:50000/rep/query/int?container=any" with user "PIDIRUSER". Response code is 503, response message is "Service Unavailable" (HCX_COMMUNICATION_ERROR)
Apart from this if we try to refresh the xi cache with T-code SXI_CACHE it show the following error. For same I have already checked the Troubleshooting Guide for How To handle Caches in SAP XI and found every thing is ok.
ERROR :-
com.sap.aii.ib.server.abapcache.CacheRefreshException: Connection to system REPOSITORY using application REPOSITORY lost. Detailed information: Error accessing "http://xxxxx:50000/rep/hmi_service_swc_manager/int?container=any" with user "PIDIRUSER". Response code is 503, response message is "Service Unavailable"
     at com.sap.aii.ibdir.server.abapcache.content.CacheSwc.addContent(CacheSwc.java:63)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:360)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.addContent(CacheRefreshRequest.java:324)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.processHTTPRequest(CacheRefreshRequest.java:145)
     at com.sap.aii.ibdir.server.abapcache.CacheRefreshRequest.handleHTTPRequest(CacheRefreshRequest.java:103)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.setXmlDataAndBufferSize(CacheRefreshSession.java:121)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.<init>(CacheRefreshSession.java:40)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshSession.getInstance(CacheRefreshSession.java:54)
     at com.sap.aii.ibdir.web.abapcache.CacheRefreshServlet.doGet(CacheRefreshServlet.java:45)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(Native Method)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
So please guide us to solve the above mention problem.
Thanks,
Harshal

Hi...
Contact your basis team .
Regards,
Leela

Interface Mapping Not Found in Integration Directory

Hey guys!
I'am getting this error in the test configuration part of the integration directory:
"Interface Mapping: <Not Found> com.sap.aii.utilxi.misc.api.BaseRuntimeException thrown during application mapping"
I don't see why I should be getting this error since I have properly defined a message and interface mapping for the receiving interface.
BTW, I get this error when I use XSLT mapping. If I point my interface mapping to a normal message mapping, I get no error. Is there anything I am missing?
Regards,
Glenn

The weird thing is that when I test the the configuration in the Integration Directory, it is still looking for my old message mapping (the one i created using xi editor) even though I already replaced the referenced message mapping in the interface mapping to the XSL one.
Yes, I tested the interface mapping with the same data using the XSL mapping and there's no problem.
When I send the message though, I get an error saying "NO_RECEIVER_CASE_ASYNC" I really don't see why it should not recognize the receiver. I tried refreshing the cache but it still looks for my old mapping program...
:P

Integration Directory configurations for IDOC - XI - File

Hi all,
I have a scenario as above: IDOC-XI-FILE
The IDOCs come from an R/3 system - NHGDDBS01.
I've configured 2 BS:
1) BS_NHGDDBS01
-> TS: NHGDDBS01, type: WebAS ABAP
-> SWCV: BASIS 6.20
2) BS_DEV1_NAUTICUS_OOTS
-> TS: TS_DEV1_NAUTICUS_OOTS, type:Third Party.
-> SWCV: SWCV_DEV1_NAUTICUS_OOTS, type: Third Party
-> PDT: PDT_NAUTICUS_OOTS
With this setup, can someone help me by showing me how to configure the Integration Directory in order to receive IDoc from R/3 (nhgddbs01)?
Please help.
Thanks.
Ron

> This is known issue.....Check the below
> steps.............
>
> Go to XI system ->and IDX1 transaction.. And check
> the port number + RFC destination is given correctly.
> this should point to SAP system ..
> Check thsi RFC destination is having all the entires
> and test connection success
>
> And the port should have the naming convention
> SAP<System Id>.
>
> ........................Check this SAP Note -940313
Hi,
I followed the SAP Note.
The SAP System ID is DV1.
I've configured IDX1 with the following port:
Port: SAPDV1
Client:108
Description: <blank>
RFC_Destination: PI_001 (This RFC destination points to DV1, despite the naming. Connection test is successful)
I recreated metadata on IDX2:
IDoc Types: ZPATINFO
Source Port: SAPDV1
IDoc Types: ZADMINFO
Source Port: SAPDV1
However, when I test the message from R/3 using WE17, <b>SM58 on R/3 </b>it's still showing the error:
Transaction IDX1: Port SAPDV1_108, client 108, RFC Destination error.
May I know where did this error occur and how to rectify this?
Please advise.
Thanks.
Ron

Business Service (vs) Business System in Integration Directory.

Hi to all,
I want to know the best practice for using Business Service and Business System, Then
When we should go for Business Service instead of Business System in Integration directory? Can any one give me suggestion for me .
Thanks,
Vikram.C.

Hi Vikram,
>>Business System: It represent a specific application System in the SLD.
Business Service: It represents an abstract service and are used in Cross Company Process.
>>When we should go for Business Service instead of Business System in Integration directory?
Its purely used in the Cross Company Process, i.e. whenever you are communicating with external system.
regards

No sender agreement configured in the XI Integration Directory

Hi,
I am using MPA(MML) message format in XI scenario. My scenarios are R3->XI->Marketplace and Marketplace->XI->R3. The first scenario works fine with no problems where as when i try to post MML message from marketplace to XI system, i am seeing the "No sender agreement configured in the XI Integration Directory for the given message header:SenderParty=xxxx; ReceiverParty=; SenderService=xxxxx; ReceiverSerivce=xxx; Interface=xxxx; InterfaceNamespace=xxx;". I have created sender agreement for this secenario, and moreover i haven't this sender agreement in the xi cache. Please let me know if i am missing anything in the configuration.
Thanks & Regards
Sruj

Thanks a lot for replies, but i have tried all these options but no luck. Does it need any additional configurtion to resolve this issue, i dont think this is cache issue, if that is the case after all steps which i have done should have fixed it. Please post your comments.
Once again thanks a lot for everyone.
Thanks & Regards,
Sruj
Message was edited by: Srujan Gogineni

PI7.11 - Integration Directory

Similar Messages

Maybe you are looking for