Pic of wall plug wont go away

i got a new cpu and tried to restore my ipod to original settings to put all new music, but when i did, it told me to plug into the wall to finish the restore. so i did this and nothing has happened. it has had a pic of a wall plug on it for the past few days and i dont know what else to do. ive tried to reset it but nothing works. any ideas?

You need to plug it into an wall outlet, I had the same problem and had to buy a firewire power plug to get mine to work. Plus if you have a radio shack near you, you can ask them to plug it in for you to get it out of the wall socket to finish restoring or updating. USB wall plugs dont like to work, unless you find one for an ipad which i have also used to get it to fully restore.

Similar Messages

  • When i plug in my ipod to itunes it shows an advertsment that wont go away

    i plug in my ipod touch into the computer and when i click on MY IPOD it show an advertisment  for an iphone application. when i click NOT NOW the advertisement wont go away. it stays on itunes not allowing me to sync or do anything on itunes with it. this is not a problem on my ipad 2 but just the ipod touch 3rd gen. please help.
    P.S. no i cannot restore it because i wl loose all of my songs since they are not in my itunes library yet.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • I have a ipod nano 4th gen. and it wont connect to my computer at all and I tryed to reset it but its been 10 minutes and iit wont go back to normal. It is charging fine when I use the wall plug. I need help!

    I have a ipod 4th gen and it wont connect to my windows computer at all. I've tryed to reset it but its been 10 min and it wont go back to normal. I use the wall plug in to charge it. also it wont charge on my computer but other wise it works fine. I need help!

    What have you tried so far in terms of troubleshooting this issue?  Are you plugging the iPod into a high powered USB 2.0 port on the back of your PC? Have you tried a different USB cable?
    What happens if you try to reset the device with it still connected to the PC?
    How to reset iPod
    Has this iPod ever worked on this PC or is this the first time you have time you have tried connecting it?
    Have you carefully worked through each and every single suggestion in this Apple support document?
    iPod not recognized in 'My Computer' and in iTunes for Windows
    B-rock

  • IPod displays a picture of a power adapter and wall plug & won't go away!

    Okay, I am trying to update a mini ipod for my neice. I originally have the 20GB ipod. Hers however is the 1.1 mini ipod... and I think it was formated for windows on a pc, but I didn't know this until after I reset it on my mac.
    I reset it to the factory setting, but it said I needed to plug it into the wall jack to complete the software settings... which is cool and fine. So i did by USB, but now all I get is this iPod displays a picture of a power adapter and wall plug. The icon will not go away and neither will anything change. I can't turn it off and if I try to bring up anything, all I get is the apple and then this icon, over and over again.
    Any help would be greatly appreciated. Thanks!
    Ipod Mini   Mac OS X (10.3.9)   I think this mini was formated for a PC, does that matter?

    Actually I did do what is it said, and it continued to blink the power adapter and wall plug picture, while I had it plugged into the wall socket. So that is why I posted this question.
    So someone else actually replied to my question and said that I have to plug it into my car ac adapter and it would finish rebooting... which it did.
    Thanks for the tips. I'm not computer iliterate, I'm just learning about the ipod.
    Ipod Mini   Mac OS X (10.3.9)  

  • My iphone 5 died and when i plugged it back in to charge the apple screen came up and wont go away. i cant turn it off because my lock button is broke. what do i do?

    my iphone 5 died and when i went to plug it in to charge the apple sign came up and it wont go away it has been stuck for 2 hours. i cant turn it off because my lockbutton is broke. what do i do?

    Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support. Get your lock button fixed then you can restore your phone.

  • HT4623 I updated my ipad 3 with the ios7 update. Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  I can't get it to go away or to access my ipad.  Any hints?

    I updated my ipad 3 with the ios7 update.  Now the screen shows the itunes icon and a pic of the plug in (as to plug into itunes)  When I do this it wants to restore my ipad, which I have already done.  I can't get out of this screen.  Any hints on what to do next?

    Something went wrong with your update; you are in Recovery Mode.
    Follow step 1 to 6 closely to recover your iPad.
    http://support.apple.com/kb/HT1808
    Note: You may have to repeat the above a few times

  • My iphone5 wont charge with usb port but works fine with wall plug... Infact computer. Doesn't recognizes the iphone

    Battery not charging with usb port but works fine with wall plug.. So the prob is computer is not detecting the iphone5 . This problem started after upgrading to 6.1.3 version

    Try to see what happens on another computer. If it works on another computer, the issue is not at the iPhone.

  • Wall plug icon won't go away

    I was given an iPod mini just before Christmas. It had been used with a Mac, so I plugged it into my Windows XP machine and did a restore. It got all the way as per the manuals to the point of saying unplug it from the computer and plug it into the wall to complete the firmware update. It's been plugged into the wall for over 24 hours and nothing changes - just alternating wall plug and apple icons. The computer doesn't recognise anything is plugged into the USB port. Does anyone have a solution to this?
    IBM ThinkPad   Windows XP Pro  

    Try Resetting Your iPod while it's connected to AC adapter.
    Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
    This will often get it recognized. It may take several attempts.
    Also try the same thing while connected to the computer

  • My ipod touch 4g is turning up or down by itself, and the speaker icon wont go away

    Okay this first started yesterdy morning, when my ipod touch4g was acting funny it wouldnt turn off, so i thought if i plugged it in it would fix itself, so i thought restoring would help it,made it worse it started turning off and on apple logo came on a few times, now i got it where i can turn it off and on okay but now i cant seem to controle the volume, and the speaker icon is showing and wont go away, and when i try turning it down when i play a song or a video, it will turn back up by itself, or it will turn down by itself,
    what would be the best way to fix this without taking it in? the nearest apple store is dallas and i dont wanna spend all the money in gas to go up there, and then see what arm and leg i gotta cut off to get them to fix it.
    should i restore and resync it one more time or should i start saving for a new ipod along with the new computer im needing?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • Logo wont go away on ipod

    i have a logo of what looks like a wall charger and wont go away and cannot add songs on becuase of it please help now

    I still havent got a fix ive seriously tried everything that i can find or that is possible but the updater has definetly ruined my ipod.
    ive also got the same icon as you...mines got an arrow and a part that connects to the bottom of your ipod.
    can anyone help?

  • I am planning to buy a iPod in America and bringing it back to Ireland and buying an Irish wall plug for the iPod, will this damage the battery because of the different voltages used?

    I am buying it in new York and brining back to Ireland

    You can even use a wall plug bought in the USA in Ireland.  The USA charger will accept eith 117 or 220V input.  All you need is an adapter to convert from the USA flat plug to an Irish style plug.

  • My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or an airport power source. My iphone and ipad charge fine on the same cable usin ghte same wall plug in the same wall socket?

    My ipod will not charge from a wall socket but will charge using the same cable if the usb end is plugged into a computer or directly into an airport power source. My iphone and ipad charge fine on the same cable using the same wall plug in the same wall socket. This makes no sense but I see that it has been posted as a problem elsewhere. This must be due to some kind of degredation of the Ipod. . It is not fixed by IOS resets as others have noted.
    Has anyone asked Apple directly about this?

    Hi there Apples or Pears,
    I would recommend taking a look at the troubleshooting steps found in the articles below.
    Charging your iPod battery
    http://support.apple.com/kb/ht1384
    iPod's battery doesn't charge
    http://support.apple.com/kb/ta44551
    -Griff W.

  • HT1476 My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones. I'm stumped :/

    My iPhone 4S will charge on a laptop but not from a wall plug. I have tried different boxes and different USB cords from the wall but none work. These boxes and USB cords work for other family members with iPhones and a USB cord that works from the laptop won't work from 3 or 4 different wall boxes that work for others. I'm stumped :/

    Update: It seems as though the phone will charge if I plug it in and then turn it off.  It will not charge while the phone is on.  Also iTunes will not recognize it, so I can't sync or anything.  I read somewhere that it could be a fuse somewhere?? Or maybe the dock connector. Where is the best place to get this repaired?

  • How do I use a 2nd Airport Extreme plugged into an Ethernet Wall Plug to join an existing wireless network to give me a better signal upstairs?

    I have a 5th generation Airport Extreme giving me a great wireless signal on the 1st floor of my house. However the signal upstairs is weak. So I purchased another 5th generation Airport Extreme that I would like to plug into an ethernet wall plug upstairs. I would then like to have the upstairs Airport Extreme join the same network thus giving me a good wirelss signal upstairs. I have a MacBook Pro running OS 10.7.4. Can somebody give me step-by-step directions to set up the upstairs Airport Extreme?

    I assume that the new AirPort Extreme is still in its original factory default settings.
    Before you connect the AirPort Extreme, please connect a laptop to the Ethernet cable that will be used for the connection and turn off the wireless on the laptop. Make sure that you can can connect to the Internet before you begin to configure the AirPort Extreme.
    Disconnect the Ethernet cable from the laptop and connect it to the WAN "O" port on the upstairs AirPort Extreme and power it up.
    Open Macintosh HD > Applications > Utilities > AirPort Utility 6.1
    Look in the upper left hand corner of the screen for a tab or box that reads "Other AirPort Base Stations (1)"
    Click on that box,then click on the name AirPort Extreme xxxxxx
    Wait a moment while AirPort Utility analyzes the network and then displays a message that the AirPort Extreme will be configured to extend your existing wireless network.
    Enter a Base Station (device) name for the AirPort Extreme (and a device password if prompted), then click Next.
    Wait another minute or two until AirPort Utility notifies you that the AirPort Extreme has been Set Up.
    That's it.

  • IPAD 2 Won't Charge on USB port on my laptop, my desktop Mac but will charge via the wall plug

    I am confused on what to do with my IPAD 2.  It won't charge via my USB Port on my PC that I travel with.  Also I just purchased a new desktop Mac and it will not charge on that USB port either.  But it will charge via the Wall Plug that came with it.  I am worried when I travel to different countries to use the wall plug.  I have an adapter to switch power.  I am from Canada and travel oversees where the power is 240 vs the 120 at home.  If I use my plug adapter and plug in my ipad to the wall Will I destroy the battey in my IPAD 2.  I love my ipad to travel with but it is very frustrating when it will not charge on my PC or on the airplane.  Then I am afraid to use the wall plug in the airport because of the difference in power.  Would really appreciate some help here because I am oversees 2 weeks a month and only get a couple days use of my IPAD.  I have all my books and everything on it and need to be able to recharge it.  Does anyone have any suggestions?
    Thanks
    Confused!!!!

    For better future reference, you should be aware that the voltage means nothing when it comes to charging power. All that that is telling you is that the Power Adapter will work across that voltage range, i.e., you don't need a transformer to plug it into the outlet (although you may need different plugs, which is a separate topic).
    What matters is the amperage (A) and the power in watts (W). The Power Adapter puts out 2 A @ 5 VDC (volts DC), which means it's producing 10 watts of power. It will output that across the entire voltage range.
    A high-power USB port on a PC will put out 0.5A @ 5VDC, or 2.5 W. Be aware that not all of the ports on any given PC are likely to be putting out even that much power, at may well be putting out less than half as much. That's why you'll often see the "Not Charging" when plugged into a USB port, especially on Windoze laptops, and why it will charge very slowly even when it works.
    FYI, the charger which is sold with the iPhone looks identical, is called the same thing, but only puts out 1A. It will work on the iPad but will charge more slowly. By that same token, the iPad charger will charge an iPhone just fine, it will just charge faster.

Maybe you are looking for

  • How to hide the rows in report which there is no data

    Hi, I am using web I rich client Xi R3.1 version. In the report i am displaying data region wise and applied section on the column named 'business unit'. Now i see there is no data for some business units and dont want to show in the report. There ar

  • JDriver error using WLS6.1 w/ Oracle 8.1.7

    Hello,I am getting the error listed when starting my weblogic server after creating a connection pool and datasource through the weblogic (6.1) console. I am currently using the jDriver 5.1.0 oracle kit. I used this kit previously with the WLS6.0sp1

  • Error FMUP044

    Hi Gurus, We´ve already aplied several SAP notes but unfortunatly the system has showed the error code FMUP044. My scenary (step-by-step): 1) I create one Down payment request (F-47):      PK (39) vendor       100,00- 2) I paid the document account o

  • Work flow issue

    Hi there, The issue here is when the WF [of T&E Module] is triggered by submitting the trip, the link between trip and the workflow [Event Linkage] gets deactivated when any inconsistent or inappropriate data is passed to the WF containers. The incon

  • "HP34970A Conf Resistance.vi" causes error message -113

    I'm using Labview 6.1 to read voltage, frequency, resistance and temperature readings from an HP34970A (with 34902A 16-channel multiplexer). Every time the "HP34970A Conf Resistance.vi" is completed it causes the HP34970A to display error -113: "Unde