PicDelete and PicLoad asking to save changes when called from SUD
Hello!
I'm trying to load different reports, change text values and graphics and export those reports to images. Sometimes I want to remove all reportsheets and load a new layout, but when calling picdelete a messagebox pops up and asks the user whether he wants to save the changes. I'm trying to get rid of that messagebox because my script gets halted and I don't want the user to overwrite my layout.
This only happens when picdelete is called from a SUD and for the picdelete command this behaviour can be circumvented by using Call Execute("Call picdelete"). Sadly the same procedure does not work for the picload command.
When called from the DIAdem scripting tab the report is loaded fine but I have found no way to use this command from a SUD without the messagebox appearing.
Is there a workaround? Does DIAdem 2012 show the same behaviour?
Edit: I guess I was wrong about that Call Execute("Call picdelete") workaround. I'm seeing the same messagebox. I don't know why I thought that helped.
Best regards,
grmume
PS: I'm using DIAdem 2011
Hi grmume
In DIAdem 2012 the behavior is the same. But we have a completely new easy to use object oriented programming interface. There exist a method that reset the modified status of the Report
http://zone.ni.com/reference/en-XX/help/370858K-01/reportapi/methods/report_method_resetmodified_ire...
In former versions you only have the readonly variable PicIsChanged.
But I tried a small script in DIAdem 2011 after changing the layout and it does not ask for saving the layout.
call PicDelete
Call picload("Demo.TDR")
Hope this helps
Winfried
Similar Messages
-
Anytime I close a document with Pages, it prompts me to save my changes (even though I have not made any changes to the document). If I click save and overwrite the original file and then immediately open it again, it still insists that there are changes and that I need to save again. Am I doing something wrong, or is this a bug?
I have tried searching and can't find a definite answer. I have not printed the document or modified it in any way.Are you opening a Word or other 'foreign' file in Pages? When you do that, Pages makes a copy as a Pages document. Until you save it as a .pages document you will get that message.
If all you want to do is view these files, a better choice would probably be to open them in TextEdit or to use QuickLook. -
Hi all,
here's an issue that i've been trying to solve for a few days now,
i had created a screen in the screen painter, inside which i've included a table control (screen number 100: ).
i, then created a second screen pointing to the same program as screen 100 and assigned screen number 200 to it. so both scrn 100 and scrn 200 has got table controls and the validations occur in modules from the same program.
the issue i face is that, while any changes i make in screen 100 works fine when i call screen 100 from the main program; it does not work when i try to modify the table control in screen 200. for example, if i were to add a new column, it messes up the allignment of the other columns in screen 200, i can't seem to assign fixed colums, etc....
has anyone come across similar issues? if so how can i solve it? could it be an error with the SAP GUI?
any response will be appreciated. points will be rewarded as well... if that's how things work here.
Thanks,
David.
Edited by: david joseph on Aug 14, 2008 2:33 AM>
david joseph wrote:
> Hi all,
> here's an issue that i've been trying to solve for a few days now,
> i had created a screen in the screen painter, inside which i've included a table control (screen number 100: ).
> i, then created a second screen pointing to the same program as screen 100 and assigned screen number 200 to it. so both scrn 100 and scrn 200 has got table controls and the validations occur in modules from the same program.
>
> the issue i face is that, while any changes i make in screen 100 works fine when i call screen 100 from the main program; it does not work when i try to modify the table control in screen 200. for example, if i were to add a new column, it messes up the allignment of the other columns in screen 200, i can't seem to assign fixed colums, etc....
>
> has anyone come across similar issues? if so how can i solve it? could it be an error with the SAP GUI?
>
> Thanks,
> David.
>
> Edited by: david joseph on Aug 14, 2008 2:33 AM
Hi David,
The description of the problem is not so clear.
Let me know where I'm wrong, you have 2 screens and 2 different tablecontrols ? When you do any changes from the sapgui to the screen 100 there is no problem. But when you do that to the screen 200 is messes up ?
My logic with table controls
if you want 2 screens to share the same control then add the control to a subscreen
when you want to have 2 screens with 2 differents controls :
in main program
CONTROLS : tc_100 type TABLEVIEW USING SCREEN 100.
CONTROLS : tc_200 type TABLEVIEW USING SCREEN 200.
In screen 100 / 200 assure the name of the controls are tc_100 / tc_200....
Using this method I never have any problem.... -
Why does Pages ask me to save changes when I only open a file and print it?
I have documents that I open regularly but only want to print (and not make changes to). But, even if I open them and do nothing other than print them, Pages prompts me to save changes when I close the file. Why is this?
If I've had the document open for a while, I'm always concerned that maybe I've made changes that I want to save and forgotten.But it always, always, always ignores it, fruhulda. That's what I'm saying. A brand new document on a brand new computer with a fresh install of iwork, and the same thing happens. Every time I open it and print--Do you want to Save? Do you want to Save?
For instance, I have a contract form I use regularly and I get that every.single.time even though I always use the same printer, and have hardly ever used the printer that pages has chosen as my default printer (a medium format inkjet with archival ink that costs far too much to use for things like correspondence). It is not my default printer in OS X, incidentally. No matter how many times I tell Pages to save the information about the printer, it will not. And I also get the same nag on the rare occasions when I do use the printer that pages has chosen (usually by mistake because I forgot to change it in the print dialog).
Perhaps this is a localization-specific bug and that's why you don't see it.
EDIT And most oddly, it happens just the same in lion with the current version of pages, which I would have thought should have autosaved that change without asking me about it. -
InDesign CC 2014.2 has stopped asking me if I want to save changes when I close a file. It's automatically saving, but I don't always want to save changes. Can anyone help?
See: Replace Your Preferences
-
Fire Fox does not ask to save tabs when I exit. It started this when I loaded my last update - 4.0. How do I fix? Getting tired of starting over . . .
Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
# Type '''about:config''' into the location bar and press enter
# Accept the warning message that appears, you will be taken to a list of preferences
# Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
# Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time" -
Xcode 4.2 not ask to save changes
Why xcode 4.2 will not ask: "to save changes or not", for example when I delete \ altering anything in the StoryBoard and elsewhere? Wen I close xcode, it's just save any changes I did, but I do not want to do this. That's bad, I can do any modifications in my project and then just hit close button and it's will be saved without any warning messages, but if i do not want to save?
Llessur999 wrote:
KT is pointing you to the very first first preference, Xcode > Preferences > General > Auto-save.
No he isn't. Those links just go the introductory pages, which say nothing about this. As usual for him.
There is no preference for this in Xcode, which is probably WHY THIS GUY ASKED.
This situation is a lot worse than simply not asking to save a file. Lion is deleting work.
Last night I typed a non-trivial paragraph of code into a source file. And saved it. I hit Command-S after every line of code, no exaggeration. A few minutes later, I was scrolling up and down madly looking for it and couldn't find it. In case I accidentally put it in the wrong file, I searched the whole project for a string I knew I'd used. Nowhere to be found.
Suddenly Xcode presents a dialog complaining that it couldn't autosave the file because it had been modified externally. Did I want to "revert", or save what was in the editor?
I've been seeing these dialogs on both my machines intermittently for weeks. Same versions of everything on each system: OS, dev tools. Same project. Usually I opt to save what's in the editor, thinking that it must be the correct version. Well now I know otherwise. I hit "Revert", and the block of code magically reappeared on my screen.
No, there was nothing else running that could've deleted code. At least, not anything visible.
But it occurred to me that this might be Lion file-management crap gone seriously and dangerously wrong. And now that other people are reporting the same thing, it looks like that suspicion is being borne out. -
SESSION EXPIRED and CPU Utilisation is 100% when called from Pro*C
Dear Colleague
We are having a production system developed using Pro*c and PL/SOL packages in HP Unix.
The system is doing the following,
A file will be decoded using Proc and data will be load into 3 temporary tables (permanent table used for temporary) using SQLLoader. Then it calls a PL/SQL package which will process the data in the temporary tables and will store the summary information in Transaction table and will returns a unique id to the calling Pro*c module. The whole process is completed in a single process/oracle session.
The PL/SQL package, join the 3 Temporary tables and retrieve the data into an Oracle object(Collection) and process it. Then the processing summary will be loaded into Transaction table and return the Primary key.
Now the problem is, when the temporary tables are loaded with more than 200,000 rows, in some cases the system is running for hours before it finish. And during the process the session shows as EXPIRED in the database and CPU utilization for the respective ProcessId in Unix is almost 100%. Then after a while the session comes alive and finishes the process.
And for some other cases, with same row count, the entire process finished in seconds.
If the same process (PL/SQL package) when run directly using a separate session inside the database(and the temporary tables are still available), rather than calling from Pro*c, it finishes in seconds, where it took hours when called from Pro*c.
It will be highly appreciated, if anyone let me know, what actually is wrong. whether it is the resource allocation or should there any known problem in calling huge PL/SQL packages from Pro*C.
we are using Oracle 10g and HP-UX ed42 B.11.31 U System.
regards
SajidDear Colleague
I just want to rephrase the problem again.
We have a Pro*C application. This will read the binary file and dump the data in ascii format to a data file. Then, within from the pro*C, 14 Dynamic tables will be created using EXEC SQL EXECUTE IMMEDIATE statement, each having almost a maximum of 45 columns. Also, created INDEXES to the tables in the same way from Pro*C.
And Control file will be created as follows
OPTIONS (SILENT=(FEEDBACK)) UNRECOVERABLE
LOAD DATA
INTO TABLE FILENAME_BCI_USED
FIELDS TERMINATED BY '|'
TRAILING NULLCOLSColumns Listed
Then Sql loader will be called using system commands (from pro*C itself) to loead the data into the table, as follows.
sprintf(syscommand,"sqlldr %s CONTROL=%s DATA=%s log=%s rows=5000 direct=true", glb_connect_string,ctl_file,data_file, log_file );
ret_value = system(syscommand);data loaded successfully.
Then the Pro*C will call a PL/SQL package for processing the data.
The PL/SQL package, to process the data, dynamically construct the below query and use it for the reference cursor to retrieve data and load into a collection.
v_sql_query := 'SELECT '|| '/*+ index(b '||p_File_Name ||'_1) index(b '||p_File_Name ||'_2) index(s '||p_File_Name ||'_3) index(s '||p_File_Name ||'_4) index(s '||p_File_Name ||'_5) index(s '||p_File_Name ||'_6) index(e '||p_File_Name ||'_7)*/' || '
iot_call_record(b.rec_no ,
b.rec_type ,
substr(b.field1,1,15) ,
nvl(substr((select s0.field1 from ' || SU_Table ||
' s0 where s0.rec_no = s.rec_no and s0.sub_rec_type = 203) ,1, 25),
substr(b.field2, 1, 25)),
substr(b.field3,1,25) ,
b.field4 ,
b.field5 ,
s.field1 ,
s.field2 ,
(select sum(s1.field1) from ' || SU_Table ||
' s1 where s1.field2 = s.rec_no and trim(s1.field2) = ''00'' ) ,
s.field3 ,
e.field2/power(10,e.field3) ,
s.field4 ,
s.field5 ,
s.field6 ,
s.field7 ,
s.field8 ,
s.field9 ,
s.field10 ,
nvl(b.field6,''F'') ,
NULL ,
s.field11 ,
(select sum(s2.field11) from ' || SU_Table || ' s2 where s2.rec_no = s.rec_no) ,
NULL)
FROM ' || BCI_Table || ' b , ' || SU_Table || ' s, ' || EXCH_Table ||
' e WHERE b.filename = s.filename
AND b.rec_no = s.rec_no
AND (b.field7 = 0 OR b.field7 = 1)
AND TRIM(s.chg_type) = ''00''
AND (s.field1 = e.field2_Code )
AND not(s.field4 = ''V'' and s.field12 > 1)
AND not(s.field4 = ''W'' and s.field12 > 1)
AND not(b.rec_type = 75 and s.field12 > 1)
AND not(b.rec_type = 75 and s.field4 =''D'')
AND s.sub_rec_type <> 203
and (s.field12 = 1 or b.rec_type not in (20,30))';
OPEN cur_call_events FOR v_sql_query;
LOOP
g_tab_call_events.DELETE;
-- Execute immediate v_sql_query bulk collect into g_tab_call_events;
FETCH cur_call_events BULK COLLECT
INTO g_tab_call_events limit 5000;
EXIT WHEN g_tab_call_events.COUNT = 0;
BEGIN
SAVEPOINT Block_Begin;
process_records(p_file_name,
g_tab_call_events);
EXCEPTION
WHEN Severe_Error THEN
Write_error('S');
ROLLBACK TO Block_Begin;
WHEN Warning THEN
Write_error('W');
WHEN NO_DATA_FOUND THEN
Write_error('S');
ROLLBACK TO Block_Begin;
END;
END LOOP;And the above module is behaving strangely.
With almost 150K or more rows in BCI_Table & SU_Table each and less than 10 rows in EXCH_Table, the application takes more than 100 minutes to complete the process.
When we checked the session activity, it is showing the same query for a very long time.
Where as files with 100K or less rows are getting processed in a minute.
And the performance for 150K+ rows is inconsistent, that when we isolate the package and run it directly calling from oracle, it is getting executed in less than 4 minutes. Whereas it takes 100+ minutes from Pro*C.
The execution plan for the above query is given below
Object Owner Object Name Cost Cardinality Bytes CPU cost IO cost
SELECT STATEMENT, GOAL = HINT: FIRST_ROWS 494 2497 494406 143334576 483
TABLE ACCESS BY INDEX ROWID SCHEMA1 FILENAME_SU_USED 4 1 21 30610 4
INDEX RANGE SCAN SCHEMA1 FILENAME_3 3 1 21764 3
SORT AGGREGATE 1 13
INDEX RANGE SCAN SCHEMA1 FILENAME_5 3 1 13 22064 3
SORT AGGREGATE 1 7
TABLE ACCESS BY INDEX ROWID SCHEMA1 FILENAME_SU_USED 4 1 7 30706 4
INDEX RANGE SCAN SCHEMA1 FILENAME_3 3 1 21764 3
CONCATENATION
HASH JOIN 355 2496 1307904 103068617 347
TABLE ACCESS FULL SCHEMA1 FILENAME_EXCH_USED 3 2 26 35987 3
HASH JOIN 352 2496 813696 96532618 344
VIEW SYS VW_NSO_1 4 20 880 12549326 3
HASH UNIQUE 4 20 220 12549326 3
TABLE ACCESS FULL SCHEMA2 IOT_SERVICE_MATRIX 3 20 220 45207 3
HASH JOIN 347 15850 2234850 76145180 341
TABLE ACCESS FULL SCHEMA1 FILENAME_SU_USED 130 16584 1111128 33625872 127
TABLE ACCESS FULL SCHEMA1 FILENAME_BCI_USED 217 23757 1758018 31405896 214
NESTED LOOPS 139 1 198 40265959 136
NESTED LOOPS 135 1 154 27716633 133
NESTED LOOPS 132 1 141 27680646 130
TABLE ACCESS FULL SCHEMA1 FILENAME_SU_USED 129 1 67 27655992 127
TABLE ACCESS BY INDEX ROWID SCHEMA1 FILENAME_BCI_USED 3 1 74 24654 3
INDEX RANGE SCAN SCHEMA1 FILENAME_1 2 1 15493 2
TABLE ACCESS FULL SCHEMA1 FILENAME_EXCH_USED 3 1 13 35987 3
VIEW SYS VW_NSO_1 4 1 44 12549326 3
SORT UNIQUE 4 20 220 12549326 3
TABLE ACCESS FULL SCHEMA2 IOT_SERVICE_MATRIX 3 20 220 45207 3Regards
Sajid
Edited by: user12039545 on Jul 11, 2010 12:05 AM
Edited by: user12039545 on Jul 11, 2010 12:15 AM
Edited by: user12039545 on Jul 11, 2010 12:32 AM
Edited by: user12039545 on Jul 11, 2010 12:34 AM
Edited by: user12039545 on Jul 11, 2010 12:37 AM -
When I go to open lightroom a message pops up and says "lightroom encountered an error when reading from it's preview cache and needs to quit" I have already restarted my computer, that didn't do anything. I then uninstalled and then reinstalled and still getting the same response.
Open the folder containing your Lightroom catalog. Locate a folder with the extension .lrdata and delete that folder. Do not delete anything else. Then restart Lightroom. It will start building a new previews folder.
-
I recently bought an iphone and would like to save witten text messages from blackberry to my new iphone..how can i do that??
You can't.
The iPhone stores text messages in conversation format for starters. -
Is it possible to call diff report queries when called from form
hello all
I want to know if it is possible to call different report queries when called from oracle 9i form .
i tried to use he
SET_REPORT_OBJECT_PROPERTY(REPORT_QUERY = 'q_diff' )
option and actualy called the report name
but it dint seem to work !!!
also is it possible to chng the title of the browser at runtimeSandeep,
this property is used with passing Record Groups as data parameters from Forms.
Passing the query name indicates that the values contained in the record group substitutes the result of the named query. This may work in client/server Reports, but it definitively doesn't work on teh Web because you can't pass a Record Group as a data parameter in this environment.
Te problem with changing a Reports query is that you must meet the same number of columns and column types as they exist in the Report. I didn't spend much time with XML based runtime customization in Reports. I think that you can change the Reports query through this feature. In Forms you would create the XML file using text_io and the merge it with an existing Reports. I never did this before. So it could be that all I am saying does not work in the end. Before following this idea, you may better ask in teh Reports forum on OTN if it is possible to use the runtime customization feature to modify the Reports query.
Fran -
HR_INFOTYPE_OPERATION not working when called from Dynamic action
Hi ,
Senario : I would like to execute a form from dynamic action which
creates a record in 0015 (Additional payment IT) .
I have writen the code as shown below am using FM HR_INFOTYPE_OPERATION
. When i execute the program from se38 it is creating a record, however it is
not created when it is called from dynamic action..when i debugged the code in
inside the FM HR_INFOTYPE_OPERATION there is a FM HR_MAINTAIN_MASTERDATA where
they are using call dialog (statement) and
sy-oncom = 'N' when called from Dynamic action and
sy-oncom = 'S' when called executed directly.
I tried to change the sy-oncom to S while run from Dynamic action it created
the record.
So Can anyone explain me abt sy-oncom and how can i resolve the issue..
code..
REPORT ZHRPYENH01 .
perFORM TERMIATION_9000.
INCLUDE DBPNPMAC.
FORM Termiation_9000 *
FORM TERMIATION_9000.
INFOTYPES : 0015.
*data : i .
*i ='c'.
*break-point.
*message i000(000) with i.
TABLES : PRELP.
DATA : P9000 TYPE PA9000." with header line.
DATA : P0000 TYPE STANDARD TABLE OF P0000 WITH HEADER LINE.
DATA : P0015 TYPE STANDARD TABLE OF P0015 WITH HEADER LINE.
DATA : HIRE_DATE LIKE SY-DATUM,
TERM_DATE LIKE SY-DATUM.
DATA : MOLGA LIKE T500L-MOLGA VALUE '25',
SEQNR LIKE PC261-SEQNR.
DATA : RGDIR TYPE STANDARD TABLE OF PC261 WITH HEADER LINE.
DATA : ACTUAL_PERIOD LIKE PA9000-RETENTION.
DATA : PNP-SW-FOUND TYPE SY-SUBRC ,
PNP-SY-TABIX TYPE SY-TABIX.
DATA : TER_PERNR LIKE PA0001-PERNR.
DATA : REF_PERNR LIKE PA0001-PERNR.
data : key type BAPIPAKEY.
data : payed_amount type p0015-BETRG.
data : future_payment_amount type p0015-BETRG.
data : p0002 like pa0002.
types : begin of t_deduction ,
deducation_date like p0015-begda,
future_payment_amount type p0015-BETRG.
types : end of t_deduction.
data : future_deduction type standard table of t_deduction with
*header line.
data : future_deduction type t_deduction .
data : RETURN type BAPIRETURN1.
*data : deduction_p0015 like standard table of p0015 with header line.
data : deduction_p0015 like p0015 .
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
****Prepare 0015 data for deduction
*deduction for payed amount
clear deduction_p0015.
*refresh deduction_p0015.
deduction_p0015-pernr = REF_PERNR.
*deduction_p0015-pernr = TER_PERNR.
deduction_p0015-lgart = 'M120'.
deduction_p0015-begda = sy-datum + 1 .
deduction_p0015-endda = sy-datum + 1 .
deduction_p0015-BETRG = payed_amount.
deduction_p0015-WAERS = 'SGD'.
deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
**deduction for future payment amount
*loop at future_deduction.
*clear deduction_p0015.
*deduction_p0015-pernr = REF_PERNR.
**deduction_p0015-pernr = TER_PERNR.
*deduction_p0015-lgart = 'M120'.
*deduction_p0015-begda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-endda = FUTURE_DEDUCTION-DEDUCATION_DATE.
*deduction_p0015-BETRG = future_deduction-future_payment_amount.
*deduction_p0015-WAERS = 'SGD'.
*deduction_p0015-ZUORD = TER_PERNR.
*append deduction_p0015.
*endloop.
Create a deduction wage type in 0015 for the employee
break-point.
CLEAR RETURN.
CALL FUNCTION 'BAPI_EMPLOYEET_ENQUEUE'
EXPORTING
NUMBER = REF_PERNR
VALIDITYBEGIN = '18000101'
IMPORTING
RETURN = return
if not return is initial.
message E000(000) with
'Referred Employee could not be locked for referal payment deducation,
please try after some time'.
endif.
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = '0015'
NUMBER = REF_PERNR
SUBTYPE = 'M120'
OBJECTID =
LOCKINDICATOR =
VALIDITYEND = SY-DATUM
VALIDITYBEGIN = SY-DATUM
RECORDNUMBER =
RECORD = deduction_p0015
OPERATION = 'COPY'
TCLAS = 'A'
DIALOG_MODE = '2'
NOCOMMIT =
VIEW_IDENTIFIER =
SECONDARY_RECORD =
IMPORTING
RETURN = return
KEY = key
break-point.
COMMIT WORK.
if not return is initial.
*return-TYPE
*ID
*NUMBER
*MESSAGE
message I000(000) with return-MESSAGE.
endif.
CALL FUNCTION 'BAPI_EMPLOYEET_DEQUEUE'
EXPORTING
NUMBER = REF_PERNR
VALIDITYBEGIN = '18000101'
IMPORTING
RETURN = return
xxxxxxxxxxxxxxxxxxxx
xxxxxxxxxxxxxxxxx
Thanks and regards
-Senthil Bala
Message was edited by: senthil balaHi Senthil
Why at all U want a subroutine to create a record in IT0015 through Dynamic action.There are some standard codes available to update infotypes.
Let me give U an example
14 9CON BETRG 4 2 I INS,0015 This will create a record in IT0015 when IT0014 is updated with Wagetype 9CON
14 9CON BETRG 4 3 W P0015-LGART='5400' Set wagetype for IT0015(Here U can use a subroutine call to set the wagetype)
14 9CON BETRG 4 4 W P0015-BETRG=P0014-BETRG set amount for IT0015(Here U can use a subroutine call to get the amount)
14 9CON BETRG 4 5 W P0015-BEGDA=P0014-ENDDA set the dates(Here U can use a subroutine call to set the dates)
Hope this will help U.
Please award points if helpful -
JTextField update problem when called from PropertyChangeEvent
Hi,
I'm trying to create forms that can be dynamically loaded with Class.forname(formName).
Those forms should always inherit some methods that make it easy to pass data to
them and receive data from them. The idea is that the data comes from a table which
sends a hashmap (String column/JTextField-name + String Value pairs) with firePropertyChanged
as soon as a new row is seleceted. The JTextFields in the form are marked with setName("FieldName") that has to correspond to the name of the columns of the table.
My problem is that I can't update the fields in my form when I'm calling getRow(HashMap)
from within propertyChangeEvent but that's necessary to keep the forms flexible.
JTextFieldName.setText(newText) just won't work. But it works when I call getRow(HashMap)
from the constructor. SwingWorker and threads to update the form didn't help.
I don't need to call pack() / update() / repaint() on the JFrame, do I ??
update() / validate() / repaint() etc. didn't work on the JTextField themselves.
Below is the code for one of the test-forms (just a JPanel that is inserted in a frame)
with all of it's methods. Does anybody have a solution to this problem ??
Thanks for taking time for that !!
Benjamin
* testTable.java
* Created on 15. April 2004, 16:12
package viewcontrol.GUI;
* @author gerbarmb
import javax.swing.*;
import java.awt.*;
import java.beans.*;
import java.util.*;
public class testTable extends javax.swing.JPanel
implements
java.awt.event.KeyListener,
java.beans.PropertyChangeListener {
* public static void main(String[] argv) { testTable tt = new testTable();
* JFrame jf = new JFrame(); jf.setContentPane(tt); jf.setVisible(true); }
/** Creates new customizer testTable */
public testTable() {
initComponents();
HashMap hm = new HashMap();
* Only for debugging, to see that the method getRow() works when
* called from the constructor.
hm.put("ttext", "TEst");
this.getRow(hm);
* This method is called from within the constructor to initialize the form.
* WARNING: Do NOT modify this code. The content of this method is always
* regenerated by the FormEditor.
private void initComponents() {//GEN-BEGIN:initComponents
java.awt.GridBagConstraints gridBagConstraints;
jLabel1 = new javax.swing.JLabel();
textIn = new javax.swing.JTextField();
jLabel2 = new javax.swing.JLabel();
intIn = new javax.swing.JTextField();
jLabel3 = new javax.swing.JLabel();
numIn = new javax.swing.JTextField();
jLabel4 = new javax.swing.JLabel();
dateIn = new javax.swing.JTextField();
jLabel5 = new javax.swing.JLabel();
dateTimeIn = new javax.swing.JTextField();
jLabel6 = new javax.swing.JLabel();
jCheckBox1 = new javax.swing.JCheckBox();
keepValues = new javax.swing.JCheckBox();
jButton1 = new javax.swing.JButton();
setLayout(new java.awt.GridBagLayout());
jLabel1.setText("Text");
add(jLabel1, new java.awt.GridBagConstraints());
textIn.setName("ttext");
textIn.setPreferredSize(new java.awt.Dimension(100, 21));
textIn.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
textInActionPerformed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridwidth = 2;
add(textIn, gridBagConstraints);
jLabel2.setText("Integer");
add(jLabel2, new java.awt.GridBagConstraints());
intIn.setName("tint");
intIn.setPreferredSize(new java.awt.Dimension(50, 21));
add(intIn, new java.awt.GridBagConstraints());
jLabel3.setText("Number");
add(jLabel3, new java.awt.GridBagConstraints());
numIn.setName("tnum");
numIn.setPreferredSize(new java.awt.Dimension(50, 21));
add(numIn, new java.awt.GridBagConstraints());
jLabel4.setText("Date");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 0;
gridBagConstraints.gridy = 1;
add(jLabel4, gridBagConstraints);
dateIn.setName("tdate");
dateIn.setPreferredSize(new java.awt.Dimension(50, 21));
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 1;
gridBagConstraints.gridy = 1;
add(dateIn, gridBagConstraints);
jLabel5.setText("DateTime");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 2;
gridBagConstraints.gridy = 1;
add(jLabel5, gridBagConstraints);
dateTimeIn.setName("tidate");
dateTimeIn.setPreferredSize(new java.awt.Dimension(80, 21));
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridy = 1;
add(dateTimeIn, gridBagConstraints);
jLabel6.setText("Bit");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridy = 1;
add(jLabel6, gridBagConstraints);
jCheckBox1.setName("tbit");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridy = 1;
add(jCheckBox1, gridBagConstraints);
keepValues.setText("keep values");
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 7;
gridBagConstraints.gridy = 3;
add(keepValues, gridBagConstraints);
jButton1.setText("Send");
jButton1.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButton1ActionPerformed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 7;
gridBagConstraints.gridy = 2;
add(jButton1, gridBagConstraints);
}//GEN-END:initComponents
private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_jButton1ActionPerformed
sendRow();
}//GEN-LAST:event_jButton1ActionPerformed
private boolean sendRow() {
java.util.HashMap hm = new java.util.HashMap();
Component[] cs = this.getComponents();
for (int i = 0; i < cs.length; i++) {
if (((Component) cs).getName() != null) {
if (cs[i] instanceof JCheckBox) {
String value = ((JCheckBox) cs[i]).isSelected() ? "1" : "0";
hm.put(cs[i].getName(), value);
} else if (cs[i] instanceof JCheckBox) {
hm.put(cs[i].getName(), ((JTextField) cs[i]).getText());
} // end for
firePropertyChange("rowChanged", null, hm);
return true;
private void getRow(java.util.HashMap hm) {
//if (! this.keepValues.isSelected()) {
Component[] cs = this.getComponents();
for (int i = 0; i < cs.length; i++) {
if (cs[i].getName() != null && hm.containsKey(cs[i].getName())) {
Component component = cs[i];
String componentName = cs[i].getName();
String componentValue = (String) hm.get(component.getName());
if (cs[i] instanceof JTextField) {
// output for debugging
System.out.println("Setting " + cs[i].getName() + " = "
+ componentValue);
((JTextField) component).setText(componentValue);
} else if (cs[i] instanceof JCheckBox) {
// output for debugging
System.out.println("JCheckBox found");
JCheckBox cb = (JCheckBox) component;
boolean selected = (componentValue == null ? false : (componentValue.equals("1")
? true
: false));
((JCheckBox) component).setSelected(selected);
} // end for
/* Uncomment this code snippet to retrieve the text that has been set
for the components (that means JTextFields)
This is just for debugging !
Component[] cs = this.getComponents(); for (int i = 0; i < cs.length;
i++) { if (cs[i].getName() != null) { if (cs[i] instanceof
JTextField) { System.out.println("Value of " +cs[i].getName() + " = " +
((JTextField) cs[i]).getText()); } } } // end for
private void textInActionPerformed(java.awt.event.ActionEvent evt) {//GEN-FIRST:event_textInActionPerformed
}//GEN-LAST:event_textInActionPerformed
public void keyPressed(java.awt.event.KeyEvent e) {
if (e.getKeyCode() == java.awt.event.KeyEvent.VK_ENTER) {
sendRow();
public void keyReleased(java.awt.event.KeyEvent e) {
public void keyTyped(java.awt.event.KeyEvent e) {
public void propertyChange(java.beans.PropertyChangeEvent evt) {
if (evt.getPropertyName().equals("newRow")) {
final PropertyChangeEvent finalEvt = evt;
Runnable makeChanges = new Runnable () {
public void run() {
getRow((java.util.HashMap) finalEvt.getNewValue());
// Variables declaration - do not modify//GEN-BEGIN:variables
private javax.swing.JTextField dateIn;
private javax.swing.JTextField dateTimeIn;
private javax.swing.JTextField intIn;
private javax.swing.JButton jButton1;
private javax.swing.JCheckBox jCheckBox1;
private javax.swing.JLabel jLabel1;
private javax.swing.JLabel jLabel2;
private javax.swing.JLabel jLabel3;
private javax.swing.JLabel jLabel4;
private javax.swing.JLabel jLabel5;
private javax.swing.JLabel jLabel6;
private javax.swing.JCheckBox keepValues;
private javax.swing.JTextField numIn;
private javax.swing.JTextField textIn;
// End of variables declaration//GEN-END:variablesThe problem of the change in the form not being comitted is that
I forgot SwingUtilities.invokeLater(makeChanges); in the bottom
part in public void propertyChange(java.beans.PropertyChangeEvent evt)
after having created a new Runnable.
Changes to the UI often have to be comitted by SwingUtitlities.invokeLater()
though I don't know that much about Swing yet.
Thanks to everybody who tried to solve that problem.
Benjamin -
Running BDC in 'A' mode when called from Enterprise portal
HI All,
I have created a RFC which contains a BDC program that update data in SAP R/3. The RFC is called from Enterprise portal. Is it possible to run the rfc in A(all screen display) mode while calling from EP. I have tried it but it gives following 2 errors on EP
cm_no_data_received
rfc_error_communication
what changes i have to do so that i can run the BDC in 'A ' mode when called from Enterprise portalit would not be related to EP administration issues but something to do with GUI usage. it is loggically fare enough not to give options of viewing the debug screen in as it might concern security issues inway the data could be edited at any point of time. Moreover the screens u see in R3 are ABAP but whereas in EP it is purely based on Java and the calls to SAP is done via JCO thus enabling ABAP functionalities in EP. Maybe for these technical reasons or constraints it wont be possibel to view the screen in EP eventhough u had ext.bp activated
-
Bring Excel 2007 to the front when called from LabView v9 in Windows 7
I am building a duplicate system using Windows 7, LabView v9 and Excel v2007. The original system used WinXP, Excel 2007 and LabView v8.6. The issue is that the original system was able to bring Excel to the front when called from Labview using the property node -application-> visible. This new configuration runs Excel, loads the data, runs the macros but does not bring Excel to the front. The icon blinks in the Win7 taskbar and when selected displays over LabView. If I minimize the Labview window, Excel is there. This leads me to conclude that Excel is visible, as requested but will not come to the front until selected from the taskbar. The only differences, besides the versions, is the original system template files used the .xls extension in and was run in Excel in compatible mode. At the customers request, the new system uses the .xlsm extension on the Excel template files. I have tried using application.visible = True in the macro as well. Could be a setting in Labview? Could be a setting in Excel? Could be .xls vs. .xlsm? Or an issue with Windows 7 and the newer version of Labview.
HP workstation - Labview v9 - Windows 7 - Excel 2007 sp2
Thank you in advance
Stephen
Solved!
Go to Solution.I will try the windowstate change. Were these done in succession? (i.e. property node -> property node -> property node) Or were they done along the way such as call the ActiveX open and a property node then in a worksheet modification area etc. so there was some time between calls?
I am not sure about the API since the discussion there is with regard to DDE. (Taken from the link document: If you want to call a DLL that contains ActiveX
objects, use the Automation
Open VI with the Property
Node and the Invoke
Node.). I am calling Excel as an application not as a library call unless I am mistaken, which I could certainly be. Are you thinking that once Excel is active through the Automation Open VI that a DLL call to set the application visible would work? I may be trying this already but in Excel through the use of the macro I call from LabView. It contains application.visible = True at the beginning before reading files and plotting data.
I may try sprinkling Property node with application->visible in various locations in the LabView diagram as I do update cells after the call to the plot macro. The puzzle for me is the blinking Excel icon in the task bar. This means active and running but not visible or something wrong as well. There are a few #VALUE cells if not all test in the system are run. Again not a problem in Excel 2007-WinXP-LV8.6
Thank you again one and all.
Maybe you are looking for
-
Itunes 11.0.2.26
Dear Friends I have recently updated my itunes 11.0.2.26 When I get apps or update my previous apps from App Store with my iPad and I want to sync my iPad to my PC ( Windows 7) the new apps and updated ones won't transfer to my pc folder. it means if
-
How can I get the data back from my game
How can I get the data back from minecraft if I deleted the app and bought with a different Apple ID
-
Importing from Final Cut Pro-improving rendered quality
Is it possible to render an exported movie in FInal Cut so that it can be immediately written to the DVD rather than be rerendered/ compressed? FC allows you to create MPEG2, the same as iDVD or DVDs generally? Failing that. my guess is that the expo
-
Missing Features in ios7 update on my ipod touch 5th gen.
i cant change the lock rotation or find it. i have no air drop but i keep seeing a message for it. i am missing the control center or the finger print scanner, isnt it supposed to be on 5's and up? not really liking the new ios 7 right now
-
Can't use Windows Media Player or get WMV (Flip4Mac) to work on Snow Leopar
After I upgraded to Snow Leopard, a friend told me I could download Windows Media Player for free to view some mpeg files required for a class I'm taking. I googled Windows Media Player Mac Snow Leopard and downloaded the newest version, and nothing.