Pick list and pull list

Dear all
1.Can any one explain the difference between Pick list(CO27) and Pull list(MF60) with a simple example.In which scenario we go for this pick and pull list
2.What is Production storage location for components and finished product.How it is different from genereal storage location

Hi,
PIck List:
Pick List is a document by which you carry out Goods Issue for the required materials from Storage location by Production order wise , material wise etc.By pick list you generate reservation for the particular materials and then issue them against that reservation for shop floor manufacturing.
You can print the list, assemble the requested materials from the storage location accordingly, and post the goods issue via the pick list.
Pull List
Purpose
The pull list controls the in-house flow of material for supplying production with materials. The system assumes that the components required for production have already been produced in-house or procured externally and are now available to be transferred from their current storage location or bin to the production storage location.
The pull list checks the stock situation at the production storage location and calculates the quantities of missing parts. Replenishment elements can be created for these missing parts. Components can be staged via direct stock transfer or using stock transfer reservations. Replenishment can also be triggered by setting a kanban to u2018emptyu2019 or creating transfer requirements in Warehouse Management.
Integration
The pull list is an integral part of repetitive manufacturing and shop floor control.
The basis of replenishment planning is MRP - the component requirements are calculated in the MRP run. The system takes requirements from run schedule quantities, production order reservations and manual reservations into account.
Depending on the environment, replenishment can consist either of direct stock transfer, stock transfer reservations, kanbans or transfer requirements, which are then processed in the appropriate module.
Features
You can access the pull list by material to be produced (that is, by assembly), by component, production line or MRP controller, amongst others.
The pull list calculates the missing parts by checking which requirements fall within a certain period of time, which stocks are available in the production storage location, and which replenishment quantities have already been initiated via the pull list.
You can also use the pull list to create replenishment elements for the missing parts. The system first creates a replenishment proposal for the missing parts. The system can post this proposal as a replenishment element (stock transfer reservation, kanban or WM), or carry out a direct stock transfer.
Constraints
It is not the primary task of the pull list to determine the location of the required components. The only exception is in the direct stock transfer procedure where you have to enter a replenishment storage location or the system has to determine a replenishment storage location via stock determination.
The pull list is primarily responsible for planning material staging (calculating missing parts and initiating replenishment) by creating a work list in the form of replenishment elements. The actual staging is carried out by a warehouse clerk, for example, and is supported by transactions which are carried out subsequently, based on the replenishment elements.
Issue Storage Location
In the case of a material produced in-house, this is the key of the storage location that is copied to the planned order, production order, or run schedule quantity.
If the material is a component, it is the issuing storage location to which a backflush is posted.
If the material is produced, it is the receiving storage location to which the receipt of the material is posted.
Procedure
You specify the receiving storage location for repetitive manufacturing in the production version for the material master record.
Hope this helps.
Edited by: surendra patil on Dec 29, 2008 1:22 PM

Similar Messages

Pick List and Pack List

Can anyone please provide some light on how the system should generate a pick list and pack list. what config needs to be done and settings. or help me with some tutorials even.
Thanks,
Kanna Palle.

Dear Kanna,
Picking & Packing lists are the output types in the shipping output process.
Packing list
Standard output type for Packing list is PL00
To get the Packing list output you need to do the output determination settings for the outbound deliveries.
In the output determination procedure you keep the Packing list output type.
Picking list
1. First assign your Output type EK00 to the shipping point(Enterprise Structure - Definition of Shipping point), also maintain the time and medium.
2. Use TCode V/38, to maintain the condition type EK00, maintain the time,print parameters and transmission medium.
Also assign the processing routines Prog: RVADEK1,Form Routine: ENTRY, Form:SD_PICK_SINGLE
3. Mainatain the print parameters for shipping pt using TCOde VL01SHP.
For output determination in shiiping go through this IMG path
IMG>Logistics execution>Shipping>Basic Shipping functions>Output control>Output determination>Maintain Output Determination for Outbound Deliveries
-->Maintain Condition Tables
-->Maintain Output Types
-->Maintain Access Sequences
-->Maintain Output Determination Procedure
-->Assign Output Determination Procedures
Maintain condition records through VV21 transaction.
I hope this will help you,
Regards,
Murali.

I am able to save pages to my reading list and the list opens when I tap on it but no page show, just a gray screen. How do I get the reading list to show?

I am able to save pages to my reading list and the list opens when I when I tap on the icon, but all I get is a gray area and not pages to read. What am I doing wrong?

See this - http://kb.mozillazine.org/Sorting_bookmarks_alphabetically

What is Piece List, Work List and Object List

Hi All,
Can you please give idea about Piece List, Work List and Object List in BI.
What are their uses?

Hi,
Piece lists
You can use this request type to set up your own object lists and save them under a name of your choice.
For more info on this go through the link below
http://help.sap.com/saphelp_sm32/helpdata/EN/57/38e1b64eb711d182bf0000e829fbfe/content.htm
Worklists
Worklists are the quickest and most convenient way of accessing the objects that you need to translate. Translators can call up a worklist in SE63 once a system has been completely set up for translation.
For more info on this go through the link below
http://help.sap.com/saphelp_sm310/helpdata/en/77/571a1f492011d1894a0000e829fbbd/content.htm
Object Lists
The Object Lists tab page in transaction SLWB enables you to create and manage object lists in the Translation Planner.
An object list should contain all objects relevant for translation. You can create object lists according to a variety of criteria
For more info on this go through the link below
http://help.sap.com/saphelp_sm32/helpdata/EN/d4/341964249711d3b29e0000e817ab98/content.htm
Regards,
Marasa.

Differences between ABAP lists and ALV lists

what is the differences between ABAP lists and ALV lists?
Edited by: pong pong on Apr 9, 2008 5:08 AM

Hello Pong Pong,
Please go thru help topics:
ALV Grid
http://help.sap.com/saphelp_47x200/helpdata/en/bf/3bd1369f2d280ee10000009b38f889/frameset.htm
ABAP Lists
http://help.sap.com/saphelp_47x200/helpdata/en/d2/cb408a455611d189710000e8322d00/frameset.htm
Regards,
Siddhesh

Single List and Blocked List

What is the difference between Single List and Blocked List. how REUSE_ALV_LIST_DISPLAY will work with single List and Blocked List.
Please Help me.
Regards
vamsi.

hi vamsi,
to get single list u use FM's REUSE_ALV_LIST_DISPLAY or REUSE_ALV_GRID_DISPLAY and
for blocked list u use the FM's REUSE_ALV_BLOCK_LIST_INIT,
REUSE_ALV_BLOCK_LIST_APPEND & REUSE_ALV_BLOCK_LIST_DISPLAY
check this code for List display....
REPORT ZTEST_ALV1.
**TABLES DECLN
TABLES: VBRK,VBRP,T001.
TYPE-POOLS: SLIS.
TYPE-POOLS: ICON.
***DATA DECLN.
DATA: V_VBELN LIKE VBRK-VBELN,
 V_MATNR LIKE VBRP-MATNR.
CONSTANTS: C_USER_COMMAND TYPE SLIS_FORMNAME VALUE 'F_USER_COMMAND',
 C_PF_STATUS TYPE SLIS_FORMNAME VALUE 'F_SET_PF_STATUS'.
**ALV RELATED TABLES.
*--Field Catalog
DATA: IT_FIELDCAT TYPE STANDARD TABLE OF
 SLIS_FIELDCAT_ALV WITH HEADER LINE,
 IT_FIELDCAT1 TYPE STANDARD TABLE OF
 SLIS_FIELDCAT_ALV WITH HEADER LINE ,
 WA_FIELDCAT TYPE SLIS_FIELDCAT_ALV,
*--Layout
 WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
*--Sort
 IT_SORT TYPE SLIS_T_SORTINFO_ALV,
 WA_SORT TYPE SLIS_SORTINFO_ALV ,
**-Structure for excluding function codes
 WA_EXTAB TYPE SLIS_EXTAB,
**-To hold function codes to be excluded in ALV toolbar
 IT_EXTAB TYPE SLIS_T_EXTAB.
***INTERNAL TABLE DECLN.
DATA: BEGIN OF IT_VBRK OCCURS 0,
 VBELN LIKE VBRK-VBELN,
 WAERK LIKE VBRK-WAERK,
 VKORG LIKE VBRK-VKORG,
 FKDAT LIKE VBRK-FKDAT,
 BUKRS LIKE VBRK-BUKRS,
 NETWR LIKE VBRK-NETWR,
 END OF IT_VBRK.
DATA: BEGIN OF ITAB OCCURS 0,
 VBELN LIKE VBRP-VBELN,
 POSNR LIKE VBRP-POSNR,
 FKIMG LIKE VBRP-FKIMG,
 VRKME LIKE VBRP-VRKME,
 NETWR LIKE VBRP-NETWR,
 MATNR LIKE VBRP-MATNR,
 ARKTX LIKE VBRP-ARKTX,
 END OF ITAB.
DATA: IT_VBRP LIKE ITAB OCCURS 0 WITH HEADER LINE.
***selection screen.
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_VBELN FOR VBRK-VBELN,
 S_FKDAT FOR VBRK-FKDAT OBLIGATORY,
 S_MATNR FOR VBRP-MATNR.
SELECTION-SCREEN: END OF BLOCK B1.
**INITIALIZATION.
INITIALIZATION.
S_FKDAT-LOW = SY-DATUM - 200.
S_FKDAT-HIGH = SY-DATUM.
APPEND S_FKDAT.
***AT SELECTION-SCREEN.
AT SELECTION-SCREEN.
IF NOT S_VBELN IS INITIAL.
 SELECT SINGLE VBELN FROM VBRK
 INTO V_VBELN
 WHERE VBELN IN S_VBELN.
 IF SY-SUBRC <> 0.
 MESSAGE E001(ZZ2).
 ENDIF.
ENDIF.
IF NOT S_MATNR IS INITIAL.
 SELECT SINGLE MATNR FROM MARA
 INTO V_MATNR
 WHERE MATNR IN S_MATNR.
 IF SY-SUBRC <> 0.
 MESSAGE E001(ZZ2).
 ENDIF.
ENDIF.
***START-OF-SELECTION.
START-OF-SELECTION.
PERFORM GET_DATA_VBRK.
***END-OF-SELECTION.
END-OF-SELECTION.
*--Sort the Output Fields
PERFORM SORT_FIELDS.
*--Build Field catalog for the Output fields
PERFORM GET_FIELD_CATALOG.
***MODIFY LAYOUT.
PERFORM MODIFY_LAYOUT.
*--Display ALV output
PERFORM LIST_DISP TABLES IT_VBRK
 USING C_USER_COMMAND.
*& Form GET_DATA_VBRK
 text
--> p1 text
<-- p2 text
FORM GET_DATA_VBRK.
SELECT VBELN
 WAERK
 VKORG
 FKDAT
 BUKRS
 NETWR
 INTO TABLE IT_VBRK
 FROM VBRK
 WHERE VBELN IN S_VBELN
 AND FKDAT IN S_FKDAT.
ENDFORM. " GET_DATA
*& Form GET_FIELD_CATALOG
 text
--> p1 text
<-- p2 text
FORM GET_FIELD_CATALOG .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
 EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'IT_VBRK'
 I_INCLNAME = SY-REPID
 CHANGING
 CT_FIELDCAT = IT_FIELDCAT[]
 EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_FIELD_CATALOG
*& Form SORT_FIELDS
 text
--> p1 text
<-- p2 text
FORM SORT_FIELDS .
CLEAR WA_SORT.
WA_SORT-SPOS = '01'.
WA_SORT-FIELDNAME = 'VBELN' .
WA_SORT-TABNAME = 'IT_VBRK'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
CLEAR WA_SORT.
WA_SORT-SPOS = '02'.
WA_SORT-FIELDNAME = 'POSNR' .
WA_SORT-TABNAME = 'IT_VBRP'.
WA_SORT-UP = 'X'.
APPEND WA_SORT TO IT_SORT.
ENDFORM. " SORT_FIELDS
*& Form MODIFY_LAYOUT
 text
--> p1 text
<-- p2 text
FORM MODIFY_LAYOUT .
WA_LAYOUT-DEFAULT_ITEM = 'X'.
WA_LAYOUT-ZEBRA = 'X'.
WA_LAYOUT-EXPAND_FIELDNAME = 'EXPAND'.
WA_layout-colwidth_optimize = 'X'.
ENDFORM. " MODIFY_LAYOUT
*& Form LIST_DISP
 text
--> p1 text
<-- p2 text
FORM LIST_DISP TABLES P_IT_VBRK
 USING P_USER_COMMAND TYPE SLIS_FORMNAME.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = SY-REPID
 I_CALLBACK_PF_STATUS_SET = 'POPUP'
 I_CALLBACK_USER_COMMAND = 'HANDLE_USER_COMMAND'
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = IT_FIELDCAT[]
 IT_EXCLUDING = IT_EXTAB[]
 TABLES
 T_OUTTAB = IT_VBRK
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " LIST_DISP
*& Form POPUP
 text
 -->P_EXTAB text
FORM POPUP USING IT_EXTAB TYPE SLIS_T_EXTAB.
*- Pf status
SET PF-STATUS 'POPUP'.
ENDFORM. " POPUP
and check this for Block List....
REPORT ZTEST_ALV3.
TABLES: SFLIGHT,SPFLI.
TYPE-POOLS: SLIS.
DATA: BEGIN OF ITAB OCCURS 0,
 CARRID LIKE SFLIGHT-CARRID,
 CONNID LIKE SFLIGHT-CONNID,
 FLDATE LIKE SFLIGHT-FLDATE,
 PRICE LIKE SFLIGHT-PRICE,
 CURRENCY LIKE SFLIGHT-CURRENCY,
 CITYFROM LIKE SPFLI-CITYFROM,
 CITYTO LIKE SPFLI-CITYTO,
 END OF ITAB.
DATA: V_REPID LIKE SY-REPID.
***FIELD CATALOG.
DATA: ITAB_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
 WA_FLDCAT TYPE SLIS_FIELDCAT_ALV.
***SORTING
DATA: ITAB_SORT TYPE SLIS_T_SORTINFO_ALV,
 WA_SORT TYPE SLIS_SORTINFO_ALV.
***events
DATA: IT_EVENTS TYPE SLIS_T_EVENT WITH HEADER LINE,
***VARIANTS
 IT_VARIANT LIKE DISVARIANT OCCURS 0 WITH HEADER LINE.
FOR LAYOUT
DATA: WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
 IT_LAYOUT TYPE SLIS_LAYOUT_ALV OCCURS 0 WITH HEADER LINE.
****SELECTION-SCREEN
SELECTION-SCREEN: BEGIN OF BLOCK B1 WITH FRAME.
SELECT-OPTIONS: S_CARRID FOR SFLIGHT-CARRID.
SELECTION-SCREEN: END OF BLOCK B1.
****START-OF-SELECTION.
START-OF-SELECTION.
V_REPID = SY-REPID.
PERFORM GET_DATA.
***END-OF-SELECTION.
END-OF-SELECTION.
PERFORM GET_FIELDCAT.
*PERFORM GET_LAYOUT.
PERFORM BLOCK_ALV.
*& Form GET_DATA
 text
--> p1 text
<-- p2 text
FORM GET_DATA .
SELECT A~CARRID
 A~CONNID
 A~FLDATE
 A~PRICE
 A~CURRENCY
 B~CITYFROM
 B~CITYTO
 INTO TABLE ITAB
 FROM SFLIGHT AS A JOIN SPFLI AS B ON
 ACARRID = BCARRID
 WHERE A~CARRID IN S_CARRID.
ENDFORM. " GET_DATA
*& Form GET_FIELDCAT
 text
--> p1 text
<-- p2 text
FORM GET_FIELDCAT .
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
 I_PROGRAM_NAME = SY-REPID
 I_INTERNAL_TABNAME = 'ITAB'
I_STRUCTURE_NAME =
I_CLIENT_NEVER_DISPLAY = 'X'
 I_INCLNAME = SY-REPID
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
CHANGING
 CT_FIELDCAT = ITAB_FIELDCAT[]
EXCEPTIONS
 INCONSISTENT_INTERFACE = 1
 PROGRAM_ERROR = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " GET_FIELDCAT
*& Form BLOCK_ALV
 text
--> p1 text
<-- p2 text
FORM BLOCK_ALV .
PERFORM BLOCK_INIT.
PERFORM BLOCK_APPEND.
PERFORM BLOCK_DISPLAY.
ENDFORM. " BLOCK_ALV
*& Form BLOCK_INIT
 text
--> p1 text
<-- p2 text
FORM BLOCK_INIT .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_INIT'
EXPORTING
 I_CALLBACK_PROGRAM = V_REPID.
ENDFORM. " BLOCK_INIT
*& Form BLOCK_APPEND
 text
--> p1 text
<-- p2 text
FORM BLOCK_APPEND .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_APPEND'
EXPORTING
 IS_LAYOUT = WA_LAYOUT
 IT_FIELDCAT = ITAB_FIELDCAT[]
 I_TABNAME = 'ITAB'
 IT_EVENTS = IT_EVENTS[]
IT_SORT =
I_TEXT = ' '
TABLES
 T_OUTTAB = ITAB
EXCEPTIONS
 PROGRAM_ERROR = 1
 MAXIMUM_OF_APPENDS_REACHED = 2
 OTHERS = 3.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BLOCK_APPEND
*& Form GET_LAYOUT
 text
--> p1 text
<-- p2 text
FORM GET_LAYOUT .
WA_LAYOUT-DEFAULT_ITEM = 'X'.
WA_LAYOUT-ZEBRA = 'X'.
APPEND WA_LAYOUT TO IT_LAYOUT.
ENDFORM. " GET_LAYOUT
*& Form BLOCK_DISPLAY
 text
--> p1 text
<-- p2 text
FORM BLOCK_DISPLAY .
CALL FUNCTION 'REUSE_ALV_BLOCK_LIST_DISPLAY'
EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " BLOCK_DISPLAY
hope this helps,
do reward if it helps,
priya.

Piece List and Object list are not moving through transports

Hi All,
I have created the Piece List and Object list for Language translation in Development system and saved them in transport.
When i moved this in Quality system then nothing is showing there.
I have checked the Log of transport movement,everything is showing OK there.
Please suggest me the way to solve this issue.

Hi
let me explain in Points
1
error messages about logs not found during the transport.
This is usually caused by incorrect maintenance of the setting for the transport directory. Check in particular the parameters DIR_TRANS and TRANSDIR by referring to the advice given in note 556734, section "What do I need to consider when setting up the transport?".
2
An import supposedly has an error, but cannot find an error in the log files.
This is usually due to the order-independent logs. In the order-independent steps, DDIC objects of other requests may also be edited. For example, the request to adjust a table remains for so long in the internal transport tables and is therefore also processed during a subsequent transport until the adjustment was successfully completed. An error can then be displayed for the subsequent request although its objects were all imported without any errors. Explanatory notes for this are 413993, 512493, 407116 and 330378. After every import, the order-independent logs should therefore also be checked.
If the system refers to canceled RDD* jobs, check the job log via SM37 and via ST22 the short dumps and via SM21 the syslog of the system.
Hope all my inputs helps you
santosh

Integration between Custom list and task list

Is it advisable to provide solutions for the integration between custom list and tasks list in SharePoint?
I am working on a scenario where the data has to be segregated between multiple lists and there will be transactions among these lists using workflow. Some of the capabilities in Tasks list like due date notifications, calendar, tracking are needed
on the transaction. Since these lists are based out of different content types, is it advisable to choose these lists for solutions?
When we have to make few updates through workflow from custom list to tasks, will there be any problem in the transactions as it is two different content type?
Vijayaragavan, MCTS

Since SPLists and SharePoint workflows don't provide inherent
support for transactions, you have to handle rollback operations yourself.
The easiest way to simulate a transaction is to read in the state of any list item you are changing prior to executing an update, and then write that state back should you detect a failure. It's not a perfect solution, since a sufficiently severe error might
prevent your rollback updates as well. That's the price you pay for not having the data store support transactions.
That being said, while it's true many clients will ask for business critical data to be stored in SPLists, I would argue that it's your job to convince them that it's not a good idea, and that transactional databases accessed over webservices are a much safer
SP compatible way to store important data - from
stackoverflow
[custom.development]

Differences between normal list and ALV list

Hi All,
where can i find the differences between a Normal SAP List and ALV List(Documentation part).

Imagine you have to write a report that lists out customer addresses. You will write code to get the input from the user via selection screen and then read the data based on the seletion from the database into an internal table(or a set of internal tables). Now once you have the data you will need to output this. In normal list reports, you will have to use 'WRITE' statements to format the output into columns and rows. Now suppose user wants some interactivity in it. Then you will have to provide some buttons and/or menu options through custom pf-status and then write logic for reacting to the user actions. After writing many such reportsm, you will feel like some of this can generalized and reused in every report.
That is exactly what ALV does. It takes out most of repeated sections of the code from out of you and provides you with excellent outputting functionality. It provides many standard functions like 'print', 'sort', 'filter', 'sum' etc by default. Imagine writing code yourself for all these if you were writing normal list program. One more major difference is the editing feature. If you were write a program that gives the user with editing features, then you will have to write a lot of logic. But with ALV, all the features like adding a row, deleting a row, copying a row, editing some fields of a row etc come by default.
Likewise, interactivity has become quite easy to implement. Like double clicking on a customer number, if the user wants to go to display customer transaction, it is very easy using ALV.
As pointed out here by others, go through the documentation of ALV and go through some of those demo programs and you will know the difference. ALV takes out a lot of burden of coding everything away from you and lets you worry about the business functionality that your report provides, rather than formatting the output or providing interactivity to the output.
Hope this helps,
Srinivas

¿Is there an app for iPhone similar to Kaspersky (call filter, white/black list and private list?

I need an app that does for my iphone's privacy something similar to what Kaspersky does for other smartphones:
1) it offers a call filter service, so you can create a white list and a black list of numbers and contacts. You can manage your settings about calls/sms's comming from those lists and when to block/admit them.
2) (Very important) it offers the possibility of creating an additional list of numbers or contacts that are private to you. So, if you put it on "private" mode, everything related to those contacts (calls, sms's and their info in the contact list) just dissapears (it's hidden), like if they didn't exist; but if you put it on "normal" mode, everything comes back and is displayed again.
Everything with just a secret code (defined by you)... just wonderful!!
I need my iPhone to do that!!!
Thanks.

There is nothing that will do what you want in iTunes and probably never will be.

SharePoint 2013 users only see custom list and document lists that they uniquely created

In my first SharePoint 2013 project, I want to create a view where users can only see their own files that they generated. I think I know how to create this view when the list is associated with the 'Documents; folder. However I have created several custom
lists where I can only see these items when I am on the navigation pane to the right and the unique custom lists are listed under 'recent'.
Let me know if you can answer any of the following questions:
1. When on the main SharePoint website, can lists be displayed in other locations than what I just listed? If so, where would I see these other lists?
2. I would like to include the custom lists that are located in the 'recent' navigation pane as a view that only I can use. This would be based upon userid. If this is possible, how would you combine the lists lists in the same view? If this is not possible,
how would you set a view just for the lists listed under the 'recent' section?
3. The content approval solution under versioning settings of a library to restrict the documents to only ones that the user created (and also Approver rights). Then if they create a new view they still won't see the documents that were not created by
them. What about custom lists that are not in the documents area but are in the 'recent' area? Would this restrict users to see only items that they created?
4. Item level Permissions in advance settings solve this problem for the list in the document area and the custom list in the recent area? If so, how would you setup these values?

As it turns out the, setting Item-Level Permissions in a library is fully supported with PowerShell!
The PowerShell commands for changing this are very simple:
$web = Get-SPWeb http://YourSite/
$list = $web.Lists[“Your Document Library Name”]
$list.ReadSecurity = 2
$list.Update()
$web.Dispose()
Note the 3rd line which is where you determine the value for this setting using the following values:
1 = “Read all items”
2 = “Read items that were created by the user”
If you wish to modify the values for Create and Edit access instead, replace .ReadSecurity with .WriteSecurity with
the following values:
1 = “Create and edit All items”
2 = “Create items and edit items that were created by the user”
4 = “None”
For example:
$web = Get-SPWeb http://YourSite/
$list = $web.Lists[“Your Document Library Name”]
$list.WriteSecurity = 2
$list.Update()
$web.Dispose()
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

8120 call list and email list resets

I have a Pearl 8120 and the call list and email / SMS list keeps resetting. It's fairly frustrating since I can't retain emails for long or return some calls.
The software is up to date and I'm using Desktop 6 (just downloaded).
Any tips would be appreciated.

1. First thing? Check the File Free at Options > Status, what is the number at File Free?
Now, leaving the device powered ON, remove the battery of your device, hold a minute, replace and reboot. What is the File Free now?
2. What is your Operating System loaded to your device?
Look at Options > About, third line down beginning with a "v.4.x.xxx"
What is yours?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mail 5.0 mailbox list and message list 1 and 2

my mail had three columns ; mailbox list, message list and then individual message. the individual message disappeared and i don't see anyway of getting that column back! now i have to double click a message to see its content whereas before i could see the content before just by selecting it. how do i get that column back?

Mail (menu) > Preferences > Viewing > uncheck Use Classic Layout

Packing List and Price list

Hi ,
Can anyone please let me know how to create packing list?and what is Pricelist , and how can we maintain pricelist ?
Please explain with some simple scenarios.
Thanks,
Kanna.

Dear Kanna,
Packing list is one of the output type in the shipping output process.
Standard output type for Packing list is PL00
To get the Packing list output you need to do the output determination settings for the outbound deliveries.
In the output determination procedure you keep the Packing list output type.
For output determination in shiiping go through this link
http://help.sap.com/saphelp_47x200/helpdata/en/93/745127546011d1a7020000e829fd11/frameset.htm
Price list
Net Price Lists
Use
The net price list allows you to provide your customers with pricing information on materials.
Features
In the menu, choose: Sales and distribution ® Master data ® Pricing reports ® Net price lists.
Enter the sales area, the sold-to party and the plant.
Enter the data that influences pricing (such as order type and pricing date).
After starting program SDNETPRO a billing document is simulated and the system issues the result.
Note
The net price list works with the ABAP List Viewer.
You can define your own display variants using the ABAP List Viewer. All fields of table VBRP are also available. Subtotal fields KZW11 to KZW16 can be used to create customer-specific information.
You can find more information on the ABAP List Viewer in: Cross Application Components ® General Application Functions.
I hope this will help you,
Regards,
Murali.

Numbered List and Bulleted List w/ Custom Style Sheet

Hi,
I am a new user to RoboHelp 7, and must say I find it useful
but also painful to use. Currently I’m trying to solve
something that feels like a bug in RoboHelp 7, but before I give in
and accept defeat I wanted to check with the forum.
I have FrameMaker 8, and import the files to RH where I use
them to create WebHelp projects.
Here’s a short procedure:
1. I Import my files with a predefined style sheet matching
the FM styles.
2. I also check the Convert to HTML list option and set all
numbering and bullet styles to User defined.
- After import RH does the usual thing and creates a bunch
of style sheets on its own
3. I select all the files from the Topic List pod and apply a
new custom style sheet. This enables me to have one style sheet for
all the HTML files with the right layout and formatting
4. I generate the output, and RH uses the new style sheet
reference
The resulting HTML files shows that the output is not the
same as the generated HTML shown in RH’s HTML editor view
- Editor view: <li class=”style”>
- Browser view: <li>
6. If I make a change (e.g. add a space) and save the HTML
file, and generate the project again the HTML is correct in the
browser
One could argue that it’s not a big problem; however,
with a large project this is starting to look more like a nightmare
Does anyone know of this problem, and if so can it be fixed?
Kind regards,
Jon

Is this the time when I get really angry at Adobe for creating the worst FrameMaker/RoboHelp integration ever? No! However, I must admit that I'm amazed that they are unable to solve an important feature as conversion of lists from a FrameMaker document to a RoboHelp WebHelp project. When I say conversion I mean a clean conversion with minimal interference from RoboHelp that allows me to use CSS to its full extent.
Here's the problem, and this was also the problem with RoboHelp 7 and FrameMaker 8. BTW, I use standalone versions (not TCS 1 or 2).
Figures: First image depicts FrameMaker 9's Paragraph Designer and the Autonumber format for a paragraph named VizNumbered. Second image depicts the RoboHelp 8's conversion setting.
FrameMaker uses Autonumbering in front of paragraphs to create lists. This means that you in RoboHelp need to manage two formats, the autonumber and the paragraph style.
RoboHelp does of course not (by default) use Autonumbering in front of paragraphs because a RoboHelp WebHelp project is HTML based, and list tags in HTML can perfectly handle any formatting of text etc.
RoboHelp will convert, when "Convert Autonumber to HTML List" is selected, the Autonumber in FrameMaker to a list tag (LI). By default this will generate a list with a lot of margin, font and other CSS properties that tries to simulate the way the list is laid out in the FrameMaker document. In addition to the list tags it will convert the FrameMaker paragraph to a P tag which it inserts within a list tag. The issue you will experience with this is that indentations with the paragraph tag does not align properly between line 1 and 2. At the same time the WebHelp project will not look the same in IE, Firefox or Chrome. That is, Chrome and Firefox will look the same, and IE different. IE has the WYSIWYG feel, but it does not comply well with W3C standards (i.e. using P tags enclosed by LI tags is not a good idea ...).
Selecting "Convert Autonumber to RoboHelp List" does something similar, but is not recommended at all!
So, here's the big question. How can I make sure RoboHelp understands that I ONLY need to define a list tag with a CSS class attribute attached to it?
Today I basically only get the following:
<li></li> or,

What I want is the following:
<li class=""></li>
Can this be solved with today's versions, can anyone help me, or do I have to wait for the Adobe development team to realize this and to fix it?

Pick list and pull list

Similar Messages

Maybe you are looking for