Pick List error
Hi guys,
We are using pick and pack to dispatch our orders partially. For the second time now, we have observed a pick error where the pick list status changes to closed after being released yet no delivery has been made. The order therefore remains open but we cant deliver unless by doing direct partial deliveries from the order.
Has anyone encountered such a problem before or is there any solution to this?
Regards,
Muhoro.
Thank you Gordon,
I actually cannot replicate it as it happens arbitrarily.
Since we are in the process of upgrading to 2007 A, we will watch it in the new system.
Regards,
Ann Muhoro.
Similar Messages
-
Hi Experts,
I have created Script for Picking List,
I am getting the below error when processing ...
Error Info... VN 073: Errors occurred while processing output
Its working fine when Standard Script SD_PICK_SINGLE is used ..
Pls Help.
RegardsHi Raghu,
AS you are a technical person, it will be very easy for your to compare the standard SD_PICK_SINGLE and the script created by you.
Prase -
Released qty exceeds available qty pick list error
Hello experts,
I have the following scneario:
1) In stock 570
2) COmmitted 10,100
3) Available -9530
I want to create a pick list for 100 and the system doesn't let me saying " Release qty exceeds available qty".
Can someone please explain why?????????????????????
ThanksHi,
As an enhanced functionality in SAP Business One version 8.8, the Pick and Pack Manager now allows the user to release items to a pick list even when there is no available quantity to release, such as when merchandize exists but has not yet been entered into SAP Business One.
In spite of this enhancement the user cannot release an item from a Sales Order to a Pick list when the item does not have sufficient available quantity in stock to cover the quantity of the Sales Order.
The system shows the following error message:
"Released quantity exceeds available quantity"
Solution
This enhanced functionality only works if the "Block Negative Inventory by" checkbox is not selected under Administration -> System Initialisation ->Document Settings -> General tab
Check Note No. : 1485867 as well.
Kind Regards,
Jitin
SAP Business One Forum Team -
Error printing pick list from IW32
Hi all,
When trying to print pick list from transaction IW32, I get this error message:
Express document "Update was terminated" received from author ...
When I checked out this error message in SM13, I found this:
Transaction code: IW32
Module name (function): PM_ORDER_PRINT_CONTROL
Status: Update was terminated
Raise exception: KEY_NOT_FULLY_SPECIFIED (Complete key not entered)
The shop paper (pick list) is customer defined (Z*) under application area O (Maintenance orders). This shop paper is set up to print to a certain printer, P1, and printing other PLM documents on this output device works fine.
Does anyone have an idea what can be causing this error?
All helpful answers will be rewarded.
Best regards,
MVHi,
I have tried to print the pick list several times, in development, test, and production systems. It fails with the same error each time.
Do you have any ideas why this error occurs, is there any special IMG activity or PLM configuration that I could check to see if some printer settings are wrong?
Regards,
MV -
I am getting a short dump in class "CL_SSF_XSF_UTILITIES==========CP"
while running the smartform for the picking list.
The short dump says "division by 0 (type p) error." in "CONVERT_METRIC" method
The code where actual dump occurs is:
<b>when unit_character.
case ounit.
when unit_twip.
ovalue = ivalue * 1440 / cpi.
when unit_point.
ovalue = ivalue * 72 / cpi.
when unit_inch.
ovalue = ivalue / cpi.</b>.
Any help would be appreciated.
Thankshi friends,
i am facing with the same problem..
can you please let me know what is the solution for this problem ?
please remember actually it is a standard program we cant modify it... ?
Thanks in advance...
ysr
Edited by: ysr@jay on Feb 12, 2010 10:50 AM -
Error When Processing Picking List Script.
Hi Experts,
I have created Script for Picking List,
I am getting the below error when processing ...
Error Info... VN 073: Errors occurred while processing output
Its working fine when Standard Script SD_PICK_SINGLE is used ..
Pls Help.
RegardsHi Raghu,
Before processing your picking list form make sure you have created a output type for it and you have assigned your form name and program name to that output type. you can see this in TCODE: NACE
Thanks,
Pritesh -
Crystal Report Pick List - "Table ADM1 could not be found" Error
Hi,
When preview is select in sales order, we select pick list gets error.
Crystal Report Window Forms Viewer:
"Table ADM1 could not be found"
Error in File Temp { .........} .rpt
The table could not be found"
If I login remotely , then log into SAP as this user I do not get an error.
I have given user full authorisation.
I have run Verify Database.
I am assuming it is some database or network user access rights.
Could anyone help on this?
Kind Regards,
EricReport was developed and tested against a 'test' database and then imported into a 'production' database.
Problem appears to be that when B1 connects it does not reset the login credentials for the unlinked tables such as ADM1 and OADM.
Performing the following steps appears to solve the problem. Not sure how many of them are really necessary.
1. Develop and test against the test system as before.
2. Save as a .rpt file outside B1.
3. 'Set Datasource Location' to the appropriate B1 datasource for the production database and individually link every table as well as the data source.
4. Save the .rpt file again.
5. Import into the production database.
This does not specifically address the issue where it worked when logged in to the server but not remotely. Perhaps when logged in remotely the test database was not visible but when logged in locally it was. -
Error in Picking List (T-Code - CO27) - Urgent help pls
Hi all,
Situation-
A work order has been released & the item for it has been made available using the picking list (CO27). However when i check the picking list again, the same item is still showing, but the Open Qty & Shortage fields show 0. I am not able to figure out how the item is still seen despite me picking it.
When i select the line & click status, in the Business Processes tab, Release Component has a red indicator & says Error - BS 013 (System status REL is active), is this causing the problem & if yes how can i rectify it.
Solutions please......Hi Aaron,
Apologies for the delayed reply. I would like to inform you i am not a ABAPer so i dont know if what i did would be of benefit to you. But what actually had happened was the FI indicator was not ticked in the order & this was causing that error. This indicator i got to know is ticked automatically when the issual is done, but due to certain circumstances it might not be ticked, this happens due to some manual intervention is what i was made understood. I hope this was of some help to you. But i would say, it is better that u open a new thread & ask the experts for their view-point.
Regards,
Vivek -
Delivery Notes Generation Via Pick List
Am trying to generate delivery notes off pick tickets and i can't find any code example. I now came up with the following code but am having issues when items are in multiple Bin Locations.
Public Sub Sales2Delivery() '(ByVal OrderID As String)
Dim OrderID As String = ""
Try
Using connection As New SqlConnection(StaginConn)
'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y';", connection)
connection.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
' Call Read before accessing data.
While reader.Read()
Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
Dim orders As Documents = BusinessOrders
orders.GetByKey(Convert.ToInt32(reader(0)))
OrderID = Convert.ToString(reader(1))
Dim Delivery As Documents = BusinessDelivery
Delivery.CardCode = orders.CardCode
Delivery.CardName = orders.CardName
Delivery.NumAtCard = orders.NumAtCard
'Delivery.DocNum = orders.DocNum
Delivery.HandWritten = BoYesNoEnum.tNO
Delivery.Series = 8
Delivery.DocDate = DateTime.Today
Delivery.DocDueDate = DateTime.Today
Delivery.TaxDate = DateTime.Today
Delivery.Address = orders.Address
Delivery.Address2 = orders.Address2
Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
Delivery.DocCurrency = orders.DocCurrency
Delivery.DocDueDate = orders.DocDueDate
Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
Delivery.ShipToCode = orders.ShipToCode
Dim lines As Document_Lines = orders.Lines
'If (count > 0) Then
' lines.Add()
' lines.SetCurrentLine((lines.Count - 1))
'End If
Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
oPickList.GetByKey(orders.Lines.PickListIdNumber)
For i As Int32 = 0 To (lines.Count - 1)
If i > 0 Then
Delivery.Lines.Add()
Delivery.Lines.SetCurrentLine(i)
End If
' Set the Current Lines on the order
orders.Lines.SetCurrentLine(i)
Try
oPickList.Lines.SetCurrentLine(i)
Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
Delivery.Lines.BinAllocations.BinAbsEntry = oPickList.Lines.BinAllocations.BinAbsEntry
Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
While (rs.EoF <> True)
Delivery.Lines.ItemCode = rs.Fields.Item(0).Value.ToString 'orders.Lines.ItemCode
Delivery.Lines.UnitPrice = CType(rs.Fields.Item(1).Value.ToString, Double) 'orders.Lines.UnitPrice
Delivery.Lines.ItemDescription = rs.Fields.Item(2).Value.ToString 'orders.Lines.ItemDescription
rs.MoveNext()
End While
rs = Nothing
Catch ex As Exception
Continue For
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End Try
Next
If Delivery.Add() <> 0 Then
ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
Else
ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
End If
orders = Nothing
Delivery = Nothing
BusinessOrders = Nothing
BusinessDelivery = Nothing
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End While
'orders = Nothing
'BusinessOrders = Nothing
End Using
Catch ex As Exception
ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
Finally
If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
Else
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
End If
End Try
End Sub
The Error message am getting is 1470000368 - The quantity allocated to bin locations must be positive.Am getting this error now is
"1470000341 - Fully allocate item "1017494" to bin locations in warehouse "Isolo". Issue is we have items in multiple Bin locations and the items have been picked via the pick ticket. Is it also possible to generate the delivery note off the Pick List.
The new code am using is
Public Sub Sales2Delivery() '(ByVal OrderID As String)
Dim OrderID As String = ""
Try
Using connection As New SqlConnection(StaginConn)
'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y' and o.DocStatus = 'O';", connection)
connection.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
' Call Read before accessing data.
While reader.Read()
Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
Dim orders As Documents = BusinessOrders
orders.GetByKey(Convert.ToInt32(reader(0)))
OrderID = Convert.ToString(reader(1))
Dim Delivery As Documents = BusinessDelivery
Delivery.CardCode = orders.CardCode
Delivery.CardName = orders.CardName
Delivery.NumAtCard = orders.NumAtCard
'Delivery.DocNum = orders.DocNum
Delivery.HandWritten = BoYesNoEnum.tNO
'Delivery.Series = 8
Delivery.DocDate = DateTime.Today
Delivery.DocDueDate = DateTime.Today
Delivery.TaxDate = DateTime.Today
Delivery.Address = orders.Address
Delivery.Address2 = orders.Address2
Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
Delivery.DocCurrency = orders.DocCurrency
Delivery.DocDueDate = orders.DocDueDate
Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
Delivery.ShipToCode = orders.ShipToCode
Dim lines As Document_Lines = orders.Lines
'If (count > 0) Then
' lines.Add()
' lines.SetCurrentLine((lines.Count - 1))
'End If
Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
oPickList.GetByKey(orders.Lines.PickListIdNumber)
For i As Int32 = 0 To (lines.Count - 1)
If i > 0 Then
Delivery.Lines.Add()
Delivery.Lines.SetCurrentLine(i)
End If
' Set the Current Lines on the order
orders.Lines.SetCurrentLine(i)
Try
oPickList.Lines.SetCurrentLine(i)
Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
'Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
'rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
'While (rs.EoF <> True)
Delivery.Lines.ItemCode = orders.Lines.ItemCode
Delivery.Lines.UnitPrice = orders.Lines.UnitPrice
Delivery.Lines.ItemDescription = orders.Lines.ItemDescription
' rs.MoveNext()
' End While
'rs = Nothing
Catch ex As Exception
Continue For
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End Try
Next
If Delivery.Add() <> 0 Then
ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
Else
ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
End If
orders = Nothing
Delivery = Nothing
BusinessOrders = Nothing
BusinessDelivery = Nothing
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End While
'orders = Nothing
'BusinessOrders = Nothing
End Using
Catch ex As Exception
ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
Finally
If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
Else
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
End If
End Try
End Sub -
Pick List Will Not Print On Add with SAP B1 2007A
There appears to be a bug with printing pick lists on Add with SAP B1 2007A. I have replicated the problem with PL03, 06 and 08.
Pick lists will print manually, but if you have them setup to print on add (Administration->System Initialization->Print Preferences), the following error in the log will appear:
Error Default report not found for current report type; set a default report and try again C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=6104 TID=1672
I ran a SQL trace and found the problem. The default Pick List report is set and set correctly in tables RTYP and RDOC. The problem is that SAP is looking for a RTYP.CODE value of PKL1 (instead of RLR2). PKL1 does not exist as a code in either 2005 or 2007. The Pick List document ID is RLR20001.
To confirm this on my demo database, I updated RTYP and set the CODE of RLR2 to PKL1. Afterwards, when adding a Pick List, it printed without any errors. I suppose another temporary fix would be to add a new record to the RTYP tabe with a CODE of PKL1 and the default pick list report document ID.After many hours of inquiring, searching and digging... There is an obscur SAP Note that says clearly, NOT SUPPORTED.
Best thing I could do, was to keep a server with the same configuration ready to connect to my SAN and take over from the dead server.
So for anyone interested in this topic. Save you time, search the SAP Notes for Support and high availability.
Hope that helps others. -
I defaulted input help field (pick list) but SAP CRM still asking for one
We are running SAP CRM 7.0.
Some fields as you know are dialog / pick list fields.
What I mean by this is they are input help fields where you
can click a little square (in sap crm 7.0) to the right of the text box
and it brings up a dialog screen of values that you can select from.
Here is an example screen shot of what I am talking about:
http://img834.imageshack.us/img834/5676/imageschak.png
So what I have done is implemented the GETTER function for this input help field so that by default it has a value.
The code is like so:
method GET_CURRENCY.
CALL METHOD SUPER->GET_CURRENCY
EXPORTING
ATTRIBUTE_PATH = attribute_path
ITERATOR = iterator
RECEIVING
VALUE = value.
if value eq ''.
IF sy-langu EQ 'E'.
VALUE = 'USD'.
elseif sy-langu EQ 'D'.
VALUE = 'EUR'.
ENDIF.
endif.
endmethod.
Here even is a link to this method that I created: Field Currency of Context Node BTADMINH - How to set default
The method works great it sets the default of the currency to say USD. When I click the create button to create an opportunity the field currency is set to USD, this is great because it makes my job easier that I dont have to click the input help button and select a currency, it is already there.
But once I click the "Save" button for an opportunity I get a small error in the error notification box that tells me I need to select a currency! But why is this happening a currency already exists? So If I click the input help (the little button) and reselect the currency value USD then save my opportunity this error goes away.
The question is why does this happen? I need it so that the default currency value is recognized by the SAP CRM system. Why do I have to go back in and re-select the currency if it is already set? Is there some sort of consistency check or something I need to do to eliminate this problem?
Here is a screen shot after creating an opportunity with the default Currency set to USD (this means I did not select USD in the dialog input help it was defaulted by the getter method:
http://img832.imageshack.us/img832/3011/enteracurrency.png
Only if I go back into edit mode and actually click the little square to bring up the dialog of values and select USD does this error go away. Why does this happen ?I called SET_CURRENCY right after setting my value and the error is now gone.
SET_CURRENCY( EXPORTING ATTRIBUTE_PATH = ATTRIBUTE_PATH
iterator = iterator
value = value ).
Got the tip from Pieter who has a good blog on SAP CRM: http://sapcrmweblog.blogspot.com/ -
Clarifications in pick list output type EK00
Hello ,
Have any one of you used the pick list output EK00 . I have
tried this and I do have some issues with
We are using SAP R/3 4.7 x 200 version .
Output type EK00 is not available in the application V2 (
Shipping ) . Its available in application V4 (Shipping special
case).
1. I have assigned the shipping points through T code VOK2 as I
am not able to find the output EK00 through customization menu.
2. I have maintained the printers details through VP01SHP ( correct me if I am wrong) . I am using the standard program RVADEK01 and form
SD_PICK_SINGLE in the output EK00.
After doing the above setting when I am creating delivery in
VL01N , the output type EK00 is not assigned automatically and
when I try to assign it manually , it gives an error message
"Processing program missing for output EK00 (medium 1)in
application V2" . I dont know why the system is looking for
application V2 when it is not available in V2 and only available
in V4 .
Am I missing anything in my process . Can some one help me in this .
With regards,
Joseph Anand.BDear Joseph,
Have you done the following setting in transaction v/38:
1.On the Display View "Output Types": Overview screen, in the Output type group box, select EK00. (Application V4)
2.In the left frame, under Dialog Structure, double-click on the Processing routines folder.
3.On the Change View "Processing Routines": Overview screen, choose .
4.In the first medium, for Print output, enter the Smart Form print program /SMB40/RVADEK01 under Program and Smart Form /SMB40/SDPIK_L under SmartForm.
Document Types Picking List
Output Types EK00
Transaction Code v/38
Smart Form Program /SMB40/RVADEK01
Smart Form /SMB40/SDPIK_L
/SMB40/SDPIK_A
5. Save the changes.
Regards,
Naveen. -
[PLEASE HELP] Display Customer Ref. No. in Pick List
Hi,
We are trying to display Customer Ref. No. (from Sales Order / Res. Invoice) in the pick list.
I have created a new UDF in the PIck List row.
But I am not sure what is the correct query to use to call this out so I can link it to the UDF.
Could someone please help us?
Thank you very much.
Edited by: Anfernee Chang on Nov 21, 2011 5:53 AMshafi_sunshine wrote:
Hi ,
>
> Try This....
>
> You can use FMS
>
>
> SELECT $[$14.0.0]
>
>
>
> Thanks
> Shafi
Hi shafi_sunshine,
I have tried both of the following queries,
SELECT $[ORDR.NumAtCard]
SELECT $[$14.0.0]
but it's hasn't worked. It returned the following error in the pick list screen
Internal error (3006) occurred.
Thank you. -
Cannot see pick list on releasing production order for WH managed material.
Hi guys
I created workcenters, routing, bom, control cycle record and prod. verison for the material before creating the Prod. order. Now, I am neither able to see the Pick List nor Material Staging (Simulation) after releasing my Prod. Order. The exact error is "No WM relevant components exist". All my materials are warehouse managed.
Any help gurus??
Regards,Hi
you are mentiuoning that control cycle .
Have assigned the coponents to the storage location which is assigned to ware house.
pl. chk this.
Regards
YMREDDY -
How to set Bin Location when adding Pick List by DI
I would like to add Pick Lists by DI.
This is Working but if i Try to Add a Bin Location by using This Code:
oPL.Lines.BinAllocations.BinAbsEntry = Convert.ToInt32(binabs[a]);
oPL.Lines.BinAllocations.Quantity = Convert.ToDouble( quantity[a]) ;
i'll get iternal error -2007
if i Update the Picklist afert addig using above mentioned code update runs without error Message but no Bin Locations are visible in Pick List.
Picklist looks like this:Hi Fabian,
SAPbobsCOM.PickLists oPickList = SBO_Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPickLists);
oPickList.Lines.BaseObjectType = "17";
oPickList.Lines.OrderEntry = 378;
oPickList.Lines.OrderRowID = 0;
oPickList.Lines.ReleasedQuantity = 5;
if (oPickList.Add() != 0)
System.Windows.Forms.MessageBox.Show("Error : " + SBO_Company.GetLastErrorDescription());
//Screenshot 1
if (oPickList.GetByKey(Convert.ToInt32(SBO_Company.GetNewObjectKey())))
oPickList.Lines.BinAllocations.BinAbsEntry = 1; // 05-SYSTEM-BIN-LOCATION
oPickList.Lines.BinAllocations.Quantity = oPickList.Lines.ReleasedQuantity;
if (oPickList.UpdateReleasedAllocation() != 0)
System.Windows.Forms.MessageBox.Show("Error : " + SBO_Company.GetLastErrorDescription());
//Screenshot2
Screenshot 1
Screenshot 2
regards,
Maik
Maybe you are looking for
-
SAP HANA Lifecycle Manager Couldn't deploy using credentials
Hello, After HLM 1.0.7.7 upgrade from 1.0.6 on IBM appliance we could not apply support packages in normal mode. When we launch the Upgrade process from Hana Studio or Command line we recive the following message: Error Message: Execution of 'Deploys
-
Change dropdown values for a field in webdynpro abap
Hi All , I need to change dropdown values for a particular field ( Tax code ) in webdynpro component (FITE_VC_RECEIPTS) when selecting expense type. Right now Tax code values are coming with respect to a company code but i need tax code with respect
-
Workflow Ends in Error " No auth to send IDocs with message type ORDRSP"
Hello All, I have created an RFC user with limited Authoprizations including WE* tciodes and a few ME* transactons for an ALE Set up. I want to make sure i would not be giving more authorizations (extensive) to this RFC user and assign Just required
-
What's the icon that looks like a hard drive? (But isn't)
When I download something off of the internet (HandBreak, in this case) I get the .dmg file which then uncompresses the application, correct? Then, I get the icon that looks a bit like an external hard drive and it appears under Devices in the Finder
-
Is their anyway to disable the showing of the license on the Splash Screen for Final Cut Pro and the other applications.