Pick List Files Deleted Or Purged

Do the pick list file records get deleted/purged and if so when?

Hi,
The pick list won't get deleted/purged but will get offset when your are making delivery/invoice.
I think now you can understand.
............. ( Is nothing but keeping seperate ledger for itemwise with serial Numbers)
Regards
Chidambaram
Edited by: Chidambaram Palaniappan on Dec 10, 2008 12:58 PM

Similar Messages

5800:Files deleted, but still on the list

Help me please,
I'm a 5800 XM 'tube' user. Everything went well for a while, until I decided to connect my phone to a PC without PC Suite, and instead use the phone in mass storage mode.
I've deleted all image files in the memory card (the ones in the \Images\Backgrounds\).
As the result, the files are no longer exist in the memory card, but still exist in the image list everytime I open the Gallery. The icon of the file is like music note, and when I tap it, all of them (actually 37 of them all) would have the same name, which is one of the title of my song in the Music folder.
I can't delete them, I can't open them, in fact, nothing could be done to them. When I tried to do anything to them (like delete it), the icon will change into a 'key'.
So I'm stuck with these imaginary files that the phone thinks that I have.
So my question is:
How do I refresh the library of my Images like the way I refresh my Music Library? Isn't it suppose to be auto
refresh like in the real player file list?
I've tried to shut the phone down. No change.
I've tried to remove the memory card and put it back again. No result.
I've put back all the files like the way it used to be before I delete them. No can do.
I've transfer all my images and videos to my PC (this time using PC Suite) and deleted all files in the memory card. And voila! the gallery only consists of 37 imaginary files.
I suppose I have to format the memory card to be able to get rid of it, but is it true? What if after I format it, I get blank memory card of 8 GB with 37 imaginary files. Who knows?
Where is the file that consists of the list of the image files. If I delete the list file, will it solve the problem?
So, anyone with any suggestion, please help me?
I know I can just ignore it, but isn't a phone as sophisticated as the 'tube' should do better than that?
Thank you.

gimm wrote:
It worked but what if the files are in my phone and not in my memory card? Thanks...
Message Edited by gimm on 03-Oct-2009 05:24 AM
Unfortunately you will have to format your phone.
Before perfoming this please take a backup of your data.
Factory defaults-
Type *#7780# on your standby screen.
This will reset all your setting to default factory settings. User data wont be affected.
Soft reset-
Type *#7370#
This will reset the phone as well delete user data. Use when want to format the phone.
If none of these worked then you might want to do a hard reset.
For this you have to-
1. Switch off the phone.
2. Hold down the following three buttons: Green (the call answer button), * button, and '3' button.( Just in case of N78 it will be the multimedia key the small silver key on right side & for Nokia 5800XM - use the following buttons to do a hard reset, GREEN/RED/CAMERA keys pressed all at once on power up. this will only work on 5800's that have firmware version 20... and up. For Nokia N97 is SHIFT /SPACE BAR / BACKSPACE. )
3. While holding these buttons, hold the power button to switch on the phone.
4. Release the buttons when the phone shows the nokia hands logo or shows other signs of life like the language selection screen.
Message Edited by blueheartz on 03-Oct-2009 12:38 PM
Please thank me by giving 'KUDOS' star. It will help me to serve you better.
Currently using N82 and 5230. Next would be N?

File(FTP) Adapter doesn't pick any file from FTP server

Hi All,
This is a strange problem. I am trying to pick all the file from a FTP server using File Name: . . But the file adapter doesn't pick any file from the directory. When I change it to a specific file name eg. ABC.txt then it picks up the file ABC.txt only.
My requirement is to pick up all files in the directory and I just do not seem to understand what is wrong. I have used this wildcard option several times earlier and it always worked fine. But in this case, this does not work.
I changed the FTP server to point to an internal FTP server and it works fine.
I have checked all my parameters and everything looks okay. Like I mentioned earlier, if you specify exact file name, it picks up the file.
Any guess as to what is going on here?

Transport Protocol: FTP
Message Protocol: File
source directory: /test or test ( either one works)
file name: * or . or *.txt nothing works
server: ftp server name
port: 21
data connection: passive
user: ******
pass: ******
connect mode: permanently
transfer mode: text
QOS: exactly once
poll: 10 secs
processing mode: archive ( changed to test and delete as well, but made no difference.)
archive dir: dir path
file type: text
adapter specific attributes:
checked: set adapter specific attributes
and file name.
status: active.

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

AppleScript 10.9.0 System Events -10006 Update property list file item

Have AppleScript that runs without error on Mountain Lion 10.8.5, but errors out on Mavericks 10.9.0.
At end of script, property list items need to be updated and this is when error occurs.
Put together a subset of the script, see below) that get the error
Statement reads "set value of property list item "ArrayList001" to ArrayList001"
Text of error:
 error "System Events got an error: 'xxx.plist' is not a property list file."
 number -10006 from contents of property list file "xxx05.plist"
=============================================================================
property myPListFile : "cbmck05.plist"
property myPListFilePath : ""
property constPreviousRunDay : "PreviousRunDay"
on run
 set today to "Date01" as string
 set List001 to {}
 set List002 to {}
 set myPListFilePath to ""
 repeat with i from 1 to 8
 set end of List001 to (i * 2) as string
 end repeat
 set myPListFilePath to path to desktop folder from user domain as string
 set fileMyPList to (myPListFilePath & myPListFile) as string
clear_file(fileMyPList)
-- First time! need to initalize
 tell application "System Events"
-- create an empty property list dictionary item
 set the parent_dictionary to make new property list item with properties {kind:record}
-- create new property list file using the empty dictionary list item as contents
 set new_plistfile to ¬
make new property list file with properties {contents:parent_dictionary, name:fileMyPList}
make new property list item at end of property list items of contents of new_plistfile ¬
with properties {kind:string, name:constPreviousRunDay, value:today}
make new property list item at end of property list items of contents of new_plistfile ¬
 with properties {kind:list, name:"ArrayList001"}
make new property list item at end of property list items of contents of new_plistfile ¬
 with properties {kind:list, name:"ArrayList002"}
 end tell
 set previousRunDate to today
 set xxList to (repopulate_lists())
 set ArrayList001 to List001
 set ArrayList002 to List002
-- save info in the plist file
 tell application "System Events"
 tell property list file fileMyPList
 tell contents
 set value of property list item constPreviousRunDay to previousRunDate
 set value of property list item "ArrayList001" to ArrayList001 -- <<< ------- error caused by the statement
 set value of property list item "ArrayList002" to ArrayList002
 end tell
 end tell
 end tell
end run
-- ==========================================
on repopulate_lists()
 set newList to {}
 set List002 to {}
 repeat with i from 1 to 8
 set end of newList to i as string
 end repeat
 set List001 to newList
 return List001
end repopulate_lists
-- ==========================================
-- Does the file exist?
on fileExists(f)
 try
f as string as alias
 return true
 on error errMsg number errNum
 return false
 end try
end fileExists
-- Delete the files if exist
on clear_file(aFile)
 if fileExists(aFile) then
 tell application "Finder"
 set resultObject to delete aFile
 end tell
 end if
end clear_file

Here's an AppleScript handler that partially works around this bug (warning: it turns each list item into a string).
on plistWrite(plistPath, plistItemName, plistItemValue)
-- version 1.1, Daniel A. Shockley
-- 1.1 - rough work-around for Mavericks bug where using a list for property list item value wipes out data
 if class of plistItemValue is class of {"a", "b"} and AppleScript version of (system info) as number ≥ 2.3 then
-- Convert each list item into a string and escape it for the shell command:
-- This will fail for any data types that AppleScript cannot coerce directly into a string.
 set plistItemValue_forShell to ""
 repeat with oneItem in plistItemValue
 set plistItemValue_forShell to plistItemValue_forShell & space & quoted form of (oneItem as string)
 end repeat
 set shellCommand to "defaults write " & quoted form of POSIX path of plistPath & space & plistItemName & space & "-array" & space & plistItemValue_forShell
do shell script shellCommand
 return true
 else -- handle normally, since we aren't dealing with Mavericks list bug:
 tell application "System Events"
-- create an empty property list dictionary item
 set the parent_dictionary to make new property list item with properties {kind:record}
 try
 set plistFile to property list file plistPath
 on error errMsg number errNum
 if errNum is -1728 then
 set plistFile to make new property list file with properties {contents:parent_dictionary, name:plistPath}
 else
 error errMsg number errNum
 end if
 end try
 tell plistFile
 try
 tell property list item plistItemName
 set value to plistItemValue
 end tell
 on error errMsg number errNum
 if errNum is -10006 then
make new property list item at ¬
 end of property list items of contents of plistFile ¬
with properties ¬
 {kind:class of plistItemValue, name:plistItemName, value:plistItemValue}
 else
 error errMsg number errNum
 end if
 end try
 end tell
 return true
 end tell
 end if
end plistWrite

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy...

Okay, i have 2 bugs with maverick. First, when I delete a file within a window, the files deletes but the preview doesn't delete until I close the window and reopen it. Second, I work on a network of computers and the search feature is now buggy... When I search for a file, A) it asks me if it's a name, or it wont produce anything, and B), its slower than in prior OS versions and in some instances I have to toggle to a different directory and go back to my original directory in the search: menu bar or the search wont produce anything... Very buggy.

It appears to me that network file access is buggy in Maverick.
In my case I have a USB Drive attached to airport extreme (new model) and when I open folders on that drive they all appear empty. If I right click and I select get info after a few minutes! I get a list of the content.
It makes impossible navigate a directory tree.
File access has been trashed in Maverick.
They have improved (read broken) Finder. I need to manage a way to downgrade to Lion again.

Error in picking the file from folder

If I have 100 files in a folder, if XI comes and picking the files from the folder, while picking 50 files connection was lost in between and they are remaining 50 files are there to pick, in this scenario what happens after connection established XI will collect remaining 50 files or again it starts from first.
Can anyone answer this question with explanation.

This depends on what you have configure in
Processing parameters for File Sender communication channel:
Processing mode:
1. Archive : if you have set processing Mode as Archive then after reading the file, PI will transfer the file to Archive dir mentioned and will not consider in future for reading.
2. Delete : if you have set processing Mode as Delete, Then after reading the file PI will delete the file from FTP.
3. Test : If you have set processing Mode as Test ,then PI will keep the file as it is after reading so it will read the same file in future.
Thanks
Bhupesh

Pick List Will Not Print On Add with SAP B1 2007A

There appears to be a bug with printing pick lists on Add with SAP B1 2007A. I have replicated the problem with PL03, 06 and 08.
Pick lists will print manually, but if you have them setup to print on add (Administration->System Initialization->Print Preferences), the following error in the log will appear:
Error Default report not found for current report type; set a default report and try again C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=6104 TID=1672
I ran a SQL trace and found the problem. The default Pick List report is set and set correctly in tables RTYP and RDOC. The problem is that SAP is looking for a RTYP.CODE value of PKL1 (instead of RLR2). PKL1 does not exist as a code in either 2005 or 2007. The Pick List document ID is RLR20001.
To confirm this on my demo database, I updated RTYP and set the CODE of RLR2 to PKL1. Afterwards, when adding a Pick List, it printed without any errors. I suppose another temporary fix would be to add a new record to the RTYP tabe with a CODE of PKL1 and the default pick list report document ID.

After many hours of inquiring, searching and digging... There is an obscur SAP Note that says clearly, NOT SUPPORTED.
Best thing I could do, was to keep a server with the same configuration ready to connect to my SAN and take over from the dead server.
So for anyone interested in this topic. Save you time, search the SAP Notes for Support and high availability.
Hope that helps others.

File Adapter Not picking the files

Hi All,
We have a process wherein the file adapter picks up the file from a particular location and it processed thereafter. We get the files once every month. We noticed that if the files that are being dazzled are of the same, i.e if the same nomenclature is there for the file that was dazzled the previous month, the adapter does not pick up the file. Only after renaming the file, it picks the file and processed them.
Any idea why the files that are dazzled with the same name are not being picked up.
Thanks in Advance...!!

Hi,
While configuring file adapter to pick up the files cross verify with file name putting in the directory location against the
"Includes files with name pattern" "Excludes file with name pattern" file name..
let say if u kept .*txt if picks the files txt with any name and one more think once after picking up the file from particular location are u enabling (delete file once read) option in configuration(It all depends on ur req)..
cross check the schema element of the file pattern.

How to make JDS confirm file deletion?

I use the bash shell when logged in over SSH and I always set the following alias just in case I do something stupid:
alias rm="rm -i"Is there a similar setting for JDS that I can tell it to confirm file delete whenever I try to delete a file (i.e. popup a standard "Are you sure?" dialog box)?
Thanks!

By default JDS file browser "deletes" files to the trash can - a la windoze Recycle bin 8-( -
so it doesn't feel the need to double check as you can always reclaim the file from there.
Emptying the trash includes an "are you sure" which can be configured from the folders settings pane:
Launch->Preferences->Desktop Preferences->Folders and pick the "Behaviour" tab
If you mean you want the double check made in a terminal or console displayed within JDS, as opposed to using the file browser, then you need to place a suitable command in the configuration for the shell you're using e.g. .profile or .cshrc etc.
Regards,
Paul

URGENT: File Adapter List Files operation Issue

Hi All,
we are using List files operation in one of the SOA composite which lists all files available in the directory. what we observed files are not listing as for the timestamps.
is there any property to list all files ascending or descending based on time stamp?. we tried with ListSorter property which is suggested by Oracle,but it works for only INBOUND operations. [http://docs.oracle.com/cd/E23943_01/integration.1111/e10231/adptr_file.htm#BABBIJCJ]
Any suggestions will be greatly appreciated.

Hi,
You can try 2 options:
1. You would need to capture/collect all the file names, you might have to use BPM and create a separate interface.
2. You can also pick up those files from the archive directory using FTP and push them using mail adapter.
Regards,
Pavan

How to XI pick latest file from folder.

hi,
I have one folder in that i got almost10 files one by one with some different time period..
My requirement is Every time XI Will pick latest file from that folder With out deleting previous file.
how it is possible.
Any special configuration in file adapter may be it is sender or receiver.
Please Clarify.
Thanks

Hi Venkata shiva ,
agree with Michael
you can have some java or scripts that will help you may be change the name of the latest file and that be picked up by your adapter, asuming you have changed settings of your adapter to pick the file with this name.
Significance : - this will also not posts your file at the receiver multiple times.
Thanks and Regards,
Vishal
Message was edited by:
vishal kharat

File to RFC synchronous scenario stopped Picking the files

Hi Experts,
We have a File to RFC synchronous scenario. Till yesterday night it is working fine.
But suddenly it is stooped working.In moni, i can see the failed messages with the Mapping error " Can not create target element, values missing in the queue context "
No Payload in moni / communication channel monitoring / Message monitoring. I've noticed that, wrong files placed in the To-be- processed files and the adapter picked those files and failed in mapping.
I tried by stop and start the communication channel / did some dummy changes in the communication channel and activated. cleared the cache.
But still the communication channel is not working.when i stop and start the communication channel it will try to process the wrong files and failed.
Give me your valuable inputs to resolve this issue.
Regards
Bhargava krishna

Hi Bharghav,
Please go through the below,
Symptom
FTP Adapter is being used in the business scenario for message processing.
During file processing it is noticed, that the FTP sender channel stops
polling. There is no error in the channel monitor or the trace/log files
and the polling jobs are correctly displayed in the AFW scheduler table.
The issue is observed after a network connection issue with the FTP server.
In order to remove the hanging locks from the FTP Adapter, the parameter
'ftp.timeout' setting is required to be set, which releases the lock once
the timeout value is expired. But in the above situation, the value for the
'ftp.timeout' is not taken properly while establishing the data connection
by File Adapter.
Other terms
FTP Adapter, sender, FTP, adapter, timeout, stalled, network, hang, polling
Reason and Prerequisites
Program error
Solution
The hanging situation has now been improved by code changes. Please see
section "SP Patch Level" of this note for a list of updated software
components.
To get this correction available in your Support Package you need to apply
the patch matching to your Support Package version as per the instructions
in the NetWeaver Support Package Stack guide which can be found on the SAP
Service Marketplace as described in SAP Note 952402.
Thanks & Regards
Uday.S

List files stored in a Directory Object

Hi,
I looked on Google, on Oracle DB docs and here to find a convenient way to list files stored in a DIRECTORY for batch loading in a table with PL/SQL. But no luck, UTL_FILE doesn't seem to have a method for directory listing. I saw examples with some workaround like putting files list in a text file prior to loading. The directory is feeded by other process and network services, so I don't know the filelist that I need to import and, then delete. I dont have access to the server console and it's impossible for me to dump a kind of «dir» result into a text file. I saw other examples using Java, but it looks like I don't have access to Server Side Java too.
Is there a simple way to do that in PL/SQL only?
If not, I'll ask to the DBA the necessary rights to compile/run java on the server side...
The DB target versions for this requirement are 10g and 11g (mainly) on Windows environment.
Thanks
Bruno

brlav35 wrote:
The XUTL_FINDFILES seems to be the more convenient way. If that works for you, I certainly have no objection. In a lot of environments, though, that package would be problematic.
1) It must be installed in the SYS schema. That's generally frowned upon and lots of sites would never allow user code to go into the SYS schema. Chris is a bright guy, so I'm sure the risk of it causing harm is minimal (most likely during an install or upgrade), and it will almost certainly never cause you harm, but that would be a political show-stopper at a lot of places.
2) The package body is wrapped (if there is a version with the package body in clear text, this point is moot). Again, Chris is a well-respected guy, so I have every confidence that the code is not malicious, but asking a DBA to install a wrapped package you downloaded from the internet into the SYS schema on a production database should generate a crud-load of red flags. This is almost certainly just a theoretical danger, but DBAs and audit compliance regulations care a great deal about theoretical dangers. If someone hacked the web site and uploaded their own wrapped bit of code that had a back door, for example, it would be very hard to catch.
3) Under the covers, the package is querying one of the undocumented X$ views. Oracle is free to change those views over time, which would potentially cause the package to stop working or stop working correctly in some way. If you're developing code for a system that may be around for a number of years, that becomes a concern. It's unlikely that Oracle will change the particular X$ view that is being referenced here over the lifetime of your code base, but it's more than a trivial concern.
4) The package is determining what directories a user has access to, that's not Oracle enforcing the restriction. Probably not too big a deal, but it is probably safer from a regulatory compliance standpoint to be able to rely on Oracle the database enforcing privileges rather than relying on a delivered package to enforce those privileges. It's the difference between telling Oracle via specific grants which directories the JVM can access vs. writing your own wrapper that enforces those restrictions. In the end, the restrictions are enforced, but in one case you're relying on the developers of the Oracle database and in the other you're relying on external developers.
Just to re-iterate-- Chris is a brilliant guy, I don't mean this in any way to impugn him or his code. I am totally confident that his code works, that it works well, and that it will continue to work going forward. My concerns are purely on the political/ regulatory side of things, not on the technical side of things. Technically, I am confident that the code is top-notch.
Justin
Edited by: Justin Cave on Sep 9, 2009 12:38 PM
I wrote this before seeing the last few bits of the exchange where you and Chris already talked about the first point.

Can I list files on local drive in tab in a particular sort order?

I find it useful to have Firefox list files on a local drive or network drive such as:
file:///u:/captures/
Is there a way to have it list in the files in a tab in a particular order such as newest to oldest?

I'm not sure (based on your description) if you did or did not try this already... Most of those network drives have a USB 2.0 port. Have you tried connecting it directly to the computer, and deleting those files? You may also want to do your mass file copy to it connected this way, to speed up the transfer.
If you are able to do this type of connection with the drive, run Disk Utility. Select the drive in the sidebar and look at the bottom of the Disk Utility window. Note what it says for +Partition Map Scheme+. Then select the volume under the drive in the sidebar. Note what it says for Format. Ideally, for use with Intel Macs, the +partition map scheme+ should be *GUID Partition Table*, and the Format should be *Mac OS Extended* or *Mac OS Extended (Journaled)* (the Journaled part is not that important - it can be turned on and off).
If the format is something like FAT32 (a Windows PC format), that may be a problem. Although Mac OS X can read from and write to FAT32, I have read that FAT32 has some upper limit on file size, and there may be other issues with copying from a Mac OS formatted volume to a FAT32 volume, such as file name length and naming convention.
If you want network storage that will work with no hassles, there's the newly refreshed Time Capsules.
http://store.apple.com/us/product/MB765LL/A/Time-Capsule-1TB?mco=NDkyMTcwMg
Now with 1TB or 2GB of built-in storage and dual-band wireless networking. The older version without the dual-band wireless at 1TB is available as a refurb for a bit less.
http://store.apple.com/us/product/FB277LL/A?mco=NDkwNjU0NA
Perhaps overkill just to get network storage (since a Time Capsule is also a wired/wireless router), but I have an older AirPort Extreme Base Station (basically a Time Capsule without the storage). It is my main router, and I have connected a regular USB 2.0 drive to it for network storage (it has a USB port). It work fine with no hassles. The AirPort Utility is very easy to understand and use.

Pick List Files Deleted Or Purged

Similar Messages

Maybe you are looking for