Pick list generation

Hello ,
In pp-pi  i am using backflushing. The backflush of components will be from 'prod location'.
But in COIK t./c system does not show any components.
Is there any seting where even though i have activated backflush, system still does allow me to do picking with COIK.
Any other t/c where i can find the materials to be transfered from main loc to prod. location.
Thanks & Regards
Abhijit S Nakhwa

Dear,
As per standard SAP practice, It is not possible to generate pick list or do manual GI for the components which you are backflusing since system is doing automatic Goods Issue alongwith final confirmation of process / production order.The materials which you need to do manual Goods Issue you must remove backflush tick in material master / routing / process order wherever you have maintained.In short, backflush & pick list both simultaneously cant be used for the for the same material in same order.
Hope this helps clearing your doubt.
Regards,
Tejas

Similar Messages

  • Pick List Generation Wizard not working

    Hi all,
    I am trying to generate Pick List but the Pick List Generation Wizard is not picking the items to be released. The items in the sales order are all inventory/sales items. Is there a setting that needs be configured?
    A screenshot of the problem is attached.
    All help is appreciated.
    Regards,
    Lucas

    Hi,
    Please refer SAP note:
    1984364 - Unable to see message from SBO_SP_TransactionNotification
    when releasing to pick list if bin locations are enabled
    Thanks & Regards,
    Nagarajan

  • Picking list generation without Warehouse management

    Hi all,
    I have requirement for my client to generate picking list genereation without wm. so i assigned EK00 condition type, transmission  medium, Language, send time & picking confirmation in shipping point. Also created condition record in VP01SHP tcode but still unable to generate output for picking in VL70.
    Please suggest !
    Thanks & Regards,
    Shakti

    Following 2 recently discussed SDN thread will be help to you:
    - Re: We use picking option without warehouse management installed
    - picking without warehouse management
    Regards
    JP

  • Pick list generation error

    Hi all
    we implement an basic WMS based on ECC6 on out WH. Everithyng was fine for more than a year. Recently i tried to do some changes in purchare order area to create a new document type. I am not sure there is a link between these but when i tried to create a pick slip from outbound, transaction VL06O i got following message:
    Storage bin 0080002445 not found (enter storage type).
    I rolled back all changes done for PO document type but error still is there.
    This is happened in DEV system hence i suspect that some other changes might create this issue. There are no changes around LE
    All config for storage type is correct.
    Thank you
    Silviu

    Typically, on the outbound TO creation, the system generates a 'dynamic bin' based on the coordinates that refer to the delivery number. The creation is automatic during TO creation. First place to check is the combination of warehouse and warehouse movement type. Ensure the interim storage type (typically, 916) is placed in 'Dest' and 'scr' is marked. Additionally, ensure the 'requirement type' has 'L - Sales document'. This configuration enables automatic generation of the dynamic bin, which is essentially the delivery number. During VL06O (creation of TO) or LT03, system generates this dynamic bin to putaway material in this bin upon TO confirmation.

  • URG: ORACLE ERROR 6502 IN FDPSTP IN PICK SELECTION LIST GENERATION

    Dear All,
    I'm on 11.5.7 on Linux.
    My problem is with WSHPSGL: Pick Selection List Generation that ends with error when launched from transactions form.
    The program end with the following error:
    Oracle Shipping: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    WSHPSGL module: Pick Selection List Generation
    Current system time is 14-NOV-2002 11:26:13
    **Starts**14-NOV-2002 11:26:14
    ORACLE error 6502 in FDPSTP
    Cause: FDPSTP failed due to ORA-06502: PL/SQL: numeric or value error:
    character to number conversion error
    ORA-06512: at line 1
    If we launch the report trough OM Superuser - Shipping - Release Sales Orders -
    Release Sales Orders, there's no error.
    Has anyone have this kind of error? How can we solve it?
    Any help would be greatly appreciated.
    Thanks in advance
    FG

    EBS is 11.5.10.2
    OS is OEL 5.3.
    It was running fine until yesterday.But its giving error today.
    error log shows exception in Release_Batch_SRS procedure.
    exact code is ---
    ++++++++++++++++++++++++
    IF G_CONC_REQ = FND_API.G_TRUE THEN
    l_ret_code := FND_CONCURRENT.SET_COMPLETION_STATUS('ERROR','');
    errbuf := 'Exception occurred in Release_Batch_SRS';
    retcode := '2';
    END IF;
    ++++++++++++++++++++++
    Thanks,
    Rakesh

  • Pick selection list generation - srs

    EBS R12
    OS Linux
    I am submitted the program "pick selection list generation - srs", by using the fnd_submit API, this is supposed to pick the Sales Order and Release the Sales Order.
    Program is getting completed successfully, but is not picking the Sales Order.
    Can any body tell me the required setups for using this program.
    Regards,
    PK

    Hi PK,
    Try the following..I think for some last options.
    1. Subinventory specified as release criteria, and the order lines do not have a subinventory specified.
    2. A specific sales order is entered, and the scheduled ship date or request date ranges are outside the dates specified in the order. For example, order 12345 was entered and booked with scheduled ship date of Nov 1, 2009; and when pick releasing this order, a scheduled ship date range of Oct 1 2009 through October 31 2009 was specified.
    3. Shipping warehouse specified on the Pick Release form is not the same as the shipping warehouse specified on the order.
    Thanks
    -Arif.

  • Delivery Notes Generation Via Pick List

    Am trying to generate delivery notes off pick tickets and i can't find any code example. I now came up with the following code but am having issues when items are in multiple Bin Locations.
    Public Sub Sales2Delivery() '(ByVal OrderID As String)
            Dim OrderID As String = ""
            Try
                Using connection As New SqlConnection(StaginConn)
                    'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
                    Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y';", connection)
                    connection.Open()
                    Dim reader As SqlDataReader = command.ExecuteReader()
                    ' Call Read before accessing data.
                    While reader.Read()
                        Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
                        Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
                        Dim orders As Documents = BusinessOrders
                        orders.GetByKey(Convert.ToInt32(reader(0)))
                        OrderID = Convert.ToString(reader(1))
                        Dim Delivery As Documents = BusinessDelivery
                        Delivery.CardCode = orders.CardCode
                        Delivery.CardName = orders.CardName
                        Delivery.NumAtCard = orders.NumAtCard
                        'Delivery.DocNum = orders.DocNum
                        Delivery.HandWritten = BoYesNoEnum.tNO
                        Delivery.Series = 8
                        Delivery.DocDate = DateTime.Today
                        Delivery.DocDueDate = DateTime.Today
                        Delivery.TaxDate = DateTime.Today
                        Delivery.Address = orders.Address
                        Delivery.Address2 = orders.Address2
                        Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
                        Delivery.DocCurrency = orders.DocCurrency
                        Delivery.DocDueDate = orders.DocDueDate
                        Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
                        Delivery.ShipToCode = orders.ShipToCode
                        Dim lines As Document_Lines = orders.Lines
                        'If (count > 0) Then
                        '    lines.Add()
                        '    lines.SetCurrentLine((lines.Count - 1))
                        'End If
                        Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
                        oPickList.GetByKey(orders.Lines.PickListIdNumber)
                        For i As Int32 = 0 To (lines.Count - 1)
                            If i > 0 Then
                                Delivery.Lines.Add()
                                Delivery.Lines.SetCurrentLine(i)
                            End If
                            ' Set the Current Lines on the order
                            orders.Lines.SetCurrentLine(i)
                            Try
                                oPickList.Lines.SetCurrentLine(i)
                                Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
                                Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
                                Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
                                Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
                                Delivery.Lines.BinAllocations.BinAbsEntry = oPickList.Lines.BinAllocations.BinAbsEntry
                                Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                                rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
                                While (rs.EoF <> True)
                                    Delivery.Lines.ItemCode = rs.Fields.Item(0).Value.ToString 'orders.Lines.ItemCode
                                    Delivery.Lines.UnitPrice = CType(rs.Fields.Item(1).Value.ToString, Double) 'orders.Lines.UnitPrice
                                    Delivery.Lines.ItemDescription = rs.Fields.Item(2).Value.ToString 'orders.Lines.ItemDescription
                                    rs.MoveNext()
                                End While
                                rs = Nothing
                            Catch ex As Exception
                                Continue For
                                My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
                            End Try
                        Next
                        If Delivery.Add() <> 0 Then
                            ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
                        Else
                            ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
                        End If
                        orders = Nothing
                        Delivery = Nothing
                        BusinessOrders = Nothing
                        BusinessDelivery = Nothing
                        My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
                    End While
                    'orders = Nothing
                    'BusinessOrders = Nothing
                End Using
            Catch ex As Exception
                ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
                My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
            Finally
                If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
                    My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
                Else
                    My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
                End If
            End Try
        End Sub
    The Error message am getting is 1470000368 - The quantity allocated to bin locations must be positive.

    Am getting this error now is
    "1470000341 - Fully allocate item "1017494" to bin locations in warehouse "Isolo". Issue is we have items in multiple Bin locations and the items have been picked via the pick ticket. Is it also possible to generate the delivery note off the Pick List.
    The new code am using is
        Public Sub Sales2Delivery() '(ByVal OrderID As String)
            Dim OrderID As String = ""
            Try
                Using connection As New SqlConnection(StaginConn)
                    'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
                    Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y' and o.DocStatus = 'O';", connection)
                    connection.Open()
                    Dim reader As SqlDataReader = command.ExecuteReader()
                    ' Call Read before accessing data.
                    While reader.Read()
                        Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
                        Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
                        Dim orders As Documents = BusinessOrders
                        orders.GetByKey(Convert.ToInt32(reader(0)))
                        OrderID = Convert.ToString(reader(1))
                        Dim Delivery As Documents = BusinessDelivery
                        Delivery.CardCode = orders.CardCode
                        Delivery.CardName = orders.CardName
                        Delivery.NumAtCard = orders.NumAtCard
                        'Delivery.DocNum = orders.DocNum
                        Delivery.HandWritten = BoYesNoEnum.tNO
                        'Delivery.Series = 8
                        Delivery.DocDate = DateTime.Today
                        Delivery.DocDueDate = DateTime.Today
                        Delivery.TaxDate = DateTime.Today
                        Delivery.Address = orders.Address
                        Delivery.Address2 = orders.Address2
                        Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
                        Delivery.DocCurrency = orders.DocCurrency
                        Delivery.DocDueDate = orders.DocDueDate
                        Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
                        Delivery.ShipToCode = orders.ShipToCode
                        Dim lines As Document_Lines = orders.Lines
                        'If (count > 0) Then
                        '    lines.Add()
                        '    lines.SetCurrentLine((lines.Count - 1))
                        'End If
                        Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
                        oPickList.GetByKey(orders.Lines.PickListIdNumber)
                        For i As Int32 = 0 To (lines.Count - 1)
                            If i > 0 Then
                                Delivery.Lines.Add()
                                Delivery.Lines.SetCurrentLine(i)
                            End If
                            ' Set the Current Lines on the order
                            orders.Lines.SetCurrentLine(i)
                            Try
                                oPickList.Lines.SetCurrentLine(i)
                                Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
                                Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
                                Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
                                Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
                                'Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
                                'rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
                                'While (rs.EoF <> True)
                                Delivery.Lines.ItemCode = orders.Lines.ItemCode
                                Delivery.Lines.UnitPrice = orders.Lines.UnitPrice
                                Delivery.Lines.ItemDescription = orders.Lines.ItemDescription
                                '            rs.MoveNext()
                                '            End While
                                'rs = Nothing
                            Catch ex As Exception
                Continue For
                My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
            End Try
                        Next
                        If Delivery.Add() <> 0 Then
                            ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
                        Else
                            ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
                        End If
                        orders = Nothing
                        Delivery = Nothing
                        BusinessOrders = Nothing
                        BusinessDelivery = Nothing
                        My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
                    End While
                    'orders = Nothing
                    'BusinessOrders = Nothing
                End Using
            Catch ex As Exception
                ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
                My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
            Finally
                If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
                    My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
                Else
                    My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
                End If
            End Try
        End Sub

  • Problem in generation of Picking list

    Hi friends,
    The scenario:  Picking list is printed as soon as the delivery is saved. The program and layout are working fine.
    Example: let a delivery is being saved with reference to a sales order with only one line item ( for simplicity), and let the quantity to be delivered that is delivery quantity (LIPSD-G_LFIMG, on screen) be 2, now there are three cases:
    1. before saving the delivery if NO Picking quantity (LIPSD-PIKMG, on screen) is entered, The picking list is printed, here the field VBUP-KOSTA (picking status field) is having value 'A', and field VBUK-KOSTK(Overall Picking status)is also having value 'A', and the picking list is printed.
    2. before saving the delivery if  Picking quantity (LIPSD-PIKMG, on screen) is entered as 1, the field VBUP-KOSTA (picking status field) is having value 'B', and field VBUK-KOSTK( Overall Picking status) is also having value 'B', and the picking list is printed.
    3. before saving the delivery if  Picking quantity (LIPSD-PIKMG, on screen) is entered as 2, the field VBUP-KOSTA (picking status field) is having value 'C', and field VBUK-KOSTK( Overall Picking status) is also having value 'C', and the picking list is NOT printed.
    I think the check is only done on VBUK-KOSTK for the picking list print, as in case 3, i changed the value of VBUK-KOSTK back to 'A' by using the user exit USEREXIT_SET_STATUS_VBUK in include LV45P079 as a result of which the picking list was printed, but it also stored the VBUK-KOSTK value as 'A' in the database table which is undesirable, as it should be saved with its earlier value, before it was explicitly made 'A'.
    So, my requirement is to Print the picking list, even if the delivery quantity and picking quantity is same for any number of line items.
    How can i solve this problem?? Speedy help requested.
    thanks,
    Sharon.

    Hi Sharon,
    Looks like you need this pick list no matter what the status of the document is and what the picking relevancy is. Why don't you create an output type that is assigned to the document all the time and then create this form as it is. If you are trying to use the standard output type and standard form and standard routine, then system is going to behave the standard way, that is to create a pick list when it is relevant for picking and only if the status is not complete. The system logic is that a pick list is supposed to tell your warehouse as to what needs to be picked and if there is nothing to be picked or if the item not relevant for the picking then it doesn't need to be there on this list.
    So if you want a list similar to the pick list, have the logic replicated minus the pre-conditions about picking status etc, have the form copied and then create and assign it to a new output type.
    Regards,
    Srinivas

  • Picking List Output in ECC 6.0

    Hello SAP Gurus,
    Can anybody tell me how to get the output for Picking List in ECC 6.0.Please do let me know the steps to be followed in configuration for the same for output generation.
    Thanks & Regards,
    Sunil

    Hi,
    The Pick List is printed from the Pick and Pack Manager.
    goto Inventory > Pick and Pack > Pick List and then Open the Pick List and Print from there.
    If this is what you are doing then if your FMS are set to Auto Refresh then as soon as your Pull the Pick list the FMS should fire and the mode should change to UPDATE.
    Alternatively,
    you can do this by customizing a report with your needed fields with ABAP person.
    regards,
    Siddharth.

  • BW Hierarchies sometimes not showing as pick list

    Hi,
    we have created a Crystal Report that uses a parameter that should be picked from a BW hierarchy (a cost center group). We created the report and published it via the BW publisher to BO and then included it with an iView in the BW Portal.
    Now when I log on to the portal and call the report, I'm presented with the static pick list (top 200 values) most of the time instead of the hierarchy view (as described in http://wiki.sdn.sap.com/wiki/display/BOBJ/CrystalReportsandBWquery+elements in the lower part of the article)
    When I then log on to the CMC and call the report there, I first get the flat list, too, but when I call the report 2 or 3 times, I get the hierarchy view. When I now go back to the BW Portal, I get thet hierarchy view there as well...
    any idea what causes this issue? How can I influence which selection screen is being displayed? (particularly as I don't want everyone to have to log on to CMC first...)
    Thanks...

    Hi Duncan,
    thank you for your reply. It's really sort of tricky.
    After the pick list is up and ready once, It'll be shown fine from that point on until, I assume, my CMC login expires.
    So maybe it's some permission problem?
    I just tested the following:
    <ul>
    <li>log into portal, call report -> flat list
    <li>log into CMC -> call report (does not have to be the same, just has to have a hierarchy pick list, a simple report does not do the trick) -> check that it has the hierarchy pick list
    <li>go back to the portal, call the report again -> hierarchy pick list comes up ok
    <li>log off from CMC
    <li>go back to the portal, call the report again -> flat list again...
    </ul>
    the whole thing works the same when I replace CMC by InfoView. The strange thing is that I have to log in to Infoview the first time I call the report from the portal (even though we have SAP credentials in BO), but this does not seem to be sufficient. I have to call one of the reports in Infoview or CMC first to make it work from the portal.
    Concerning the trace, I'll have to look into this together with our sysadmins, but I'll see what I can get.
    Thanks again for your ideas,
    cheers
    MU

  • Crystal Parameter Hierarchy Pick List not showing in Infoview

    Hello,
    We are having an issue with crystal reports not showing the hierarchy pick list in infoview.
    We have 3 environments, Dev, QA, Prod.
    Business Objects environments consist of 3 separate servers
    Dev
    Windows Server 2003 64bit
    BOXI 3.1 with Service Pack 2
    Integration Kit 3.1 with SP2
    Crystal Reports V1 SP2
    QA
    Windows Server 2003 64bit
    BOXI 3.1 with Service Pack 2
    Integration Kit 3.1 with SP2
    Crystal Reports V1 SP2
    Prod
    Windows Server 2003 64bit
    BOXI 3.1 with Service Pack 2
    Integration Kit 3.1 with SP2
    Crystal Reports V1 SP2
    SAP BW Environments consist of 2 server landscapes, with DEV / QA sitting on 1 and production on its own.
    ServerA
    Dev and QA
    ServerB
    Prod
    We create a crystal report in Dev BOBJ, and publish to DEV SAP BW system sitting on ServerA.
    The picklist shows hierarchy properly in Dev Infoview.
    We then LCM the report to QA BOBJ, and Do Not publish to QA SAP BW system sitting on ServerA.
    We transport the role that the report was published to, from Dev SAP BW to QA SAP BW
    The picklist shows hierarchy properly in QA Infoview.
    We then LCM the report to PROD BOBJ, and Do Not publish to PROD SAP BW system sitting on ServerB.
    We transport the role from QA SAP BW to Prod SAP BW
    The picklist does NOT show hierarchy properly in Prod Infoview.
    We are a bit confused on why the picklist works properly on QA Infoview without publishing, but will not work on Production Infoview.
    Is it because the repository objects for the picklist contain some server paths? (Since DEV and QA sit on the same server "ServerA")
    Do we need to publish in production SAP BW for the hierarchy pick list to function?
    Any help would be appreciated,
    Thanks!
    Nick

    Hi Nick,
    Did you get this resolved? We are encountering the same issue.  We have migrated our report from QA to Prod using BW Transport and then used BW Publisher to publish to BOE.  The parameter list shows in InfoView for Dev and QA, but not Prod.
    We're using BOE SP2 FP 2.8

  • Pick List Will Not Print On Add with SAP B1 2007A

    There appears to be a bug with printing pick lists on Add with SAP B1 2007A.  I have replicated the problem with PL03, 06 and 08.
    Pick lists will print manually, but if you have them setup to print on add (Administration->System Initialization->Print Preferences), the following error in the log will appear:
    Error      Default report not found for current report type; set a default report and try again C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=6104 TID=1672
    I ran a SQL trace and found the problem.  The default Pick List report is set and set correctly in tables RTYP and RDOC.  The problem is that SAP is looking for a RTYP.CODE value of PKL1 (instead of RLR2).  PKL1 does not exist as a code in either 2005 or 2007.  The Pick List document ID is RLR20001.
    To confirm this on my demo database, I updated RTYP and set the CODE of RLR2 to PKL1.  Afterwards, when adding a Pick List, it printed without any errors.  I suppose another temporary fix would be to add a new record to the RTYP tabe with a CODE of PKL1 and the default pick list report document ID.

    After many hours of inquiring, searching and digging...  There is an obscur SAP Note that says clearly, NOT SUPPORTED.
    Best thing I could do, was to keep a server with the same configuration ready to connect to my SAN and take over from the dead server.
    So for anyone interested in this topic.  Save you time, search the SAP Notes for Support and high availability.
    Hope that helps others.

  • Material staging indicator not populating in prod order WM pick list item

    Hello,
    I have an issue with material staging in an prod order
    1) PP-WM interface is activated
    2) Control cycle for material is created
    3) Production storage location is created for material
    4) storage type is 100 for production
    5) There is one discontinued material and also the follow up material
    6) stock of discontinued material is zero and requirement are passed to follow up material
    When we confirm the order the stagging indicator for both follow up material as well as discontinued material automatically populates zero (Non relevence to pick list items) where as it should be one (1 - for pick list items).
    One more issue user has manually inserted discontinued material as well as follow up material in production order change mode.
    In the BOM of a main material both discontinued as well as follow up material is there with some quantity as a component.
    For the same work center, control cycle , production storage location the indicator is populating.
    These two material (discontinued as well as follow up) are appearing twice in the WM pick list screen where first two line items are OK and populating indicator "1". But in line item last and second last indicator is not there.
    My question is why the stagging indicator is not automatically populating in the production order WM pick list screen in front of components.

    Unfortunately, WM material staging via production orders is not possible
    from the pull list.  Please see the long text of message RMPU 311
    (WM material staging for production order reservation not possible):
    "You cannot carry out a WM material provision for pick parts from
    production order reservations in the pull list". The reasons for this
    are cleary explained in the SAP on-line documentation via the
    following path :
      Logistics -> Logistics Execution -> Warehouse Management Guide ->
      Goods Issue -> Goods Issue for Production Supply ->
      Material Staging for Repetitive Manufacturing
    See the following under the Selection heading :
    The choice of the selection type influences which types of WM material
    staging are supported in the pull list. However, the pick parts can be
    staged via RS headers/planned orders but not with the current BOM
    explosion. The release order parts, on the other hand, can also be
    staged if the current BOM is used for calculating the dependent
    requirements.
    WM material staging via production orders is not possible from the pull
    list.
    I think you may try in CO02 or COR2 for production order or process order.

  • Item in sales order not being picked into picking list

    Hi Gurus,
    Could you please tell me the possible reasons as why an item in the sales order which has enough stock not being picked into the picking list?
    Many Thanks
    Choudry

    Hi
    Delivery creation that is selection date is controlled by the schedule line of the line item in the sales order
    Try by changing the schedule lines in sales order in VA02
    there you try to change the delivery date to past
    It might be possible if you had enough stocks at that time
    Regards
    Raja

  • I defaulted input help field (pick list) but SAP CRM still asking for one

    We are running SAP CRM 7.0.
    Some fields as you know are dialog / pick list fields.
    What I mean by this is they are input help fields where you
    can click a little square (in sap crm 7.0) to the right of the text box
    and it brings up a dialog screen of values that you can select from.
    Here is an example screen shot of what I am talking about:
    http://img834.imageshack.us/img834/5676/imageschak.png
    So what I have done is implemented the GETTER function for this input help field so that by default it has a value.
    The code is like so:
    method GET_CURRENCY.
    CALL METHOD SUPER->GET_CURRENCY
      EXPORTING
        ATTRIBUTE_PATH = attribute_path
       ITERATOR       = iterator
      RECEIVING
        VALUE          = value.
          if value eq ''.
            IF sy-langu EQ 'E'.
              VALUE = 'USD'.
            elseif sy-langu EQ 'D'.
              VALUE = 'EUR'.
            ENDIF.
          endif.
    endmethod.
    Here even is a link to this method that I created: Field Currency of Context Node BTADMINH - How to set default
    The method works great it sets the default of the currency to say USD.  When I click the create button to create an opportunity the field currency is set to USD, this is great because it makes my job easier that I dont have to click the input help button and select a currency, it is already there.
    But once I click the "Save" button for an opportunity I get a small error in the error notification box that tells me I need to select a currency!  But why is this happening a currency already exists?  So If I click the input help (the little button) and reselect the currency value USD then save my opportunity this error goes away.
    The question is why does this happen?  I need it so that the default currency value is recognized by the SAP CRM system.  Why do I have to go back in and re-select the currency if it is already set?  Is there some sort of consistency check or something I need to do to eliminate this problem? 
    Here is a screen shot after creating an opportunity with the default Currency set to USD (this means I did not select USD in the dialog input help it was defaulted by the getter method:
    http://img832.imageshack.us/img832/3011/enteracurrency.png
    Only if I go back into edit mode and actually click the little square to bring up the dialog of values and select USD does this error go away.  Why does this happen ?

    I called SET_CURRENCY right after setting my value and the error is now gone. 
      SET_CURRENCY( EXPORTING ATTRIBUTE_PATH = ATTRIBUTE_PATH
                    iterator = iterator
                    value = value ).
    Got the tip from Pieter who has a good blog on SAP CRM: http://sapcrmweblog.blogspot.com/

Maybe you are looking for