Pick list print preview
Hi all,
How can I view the print preview of pick list output type EK00?
When I get to the Picking output from VT02N, it only shows me the status of the output generated.
But I can't see the print preview.
Also can I generate Ek00 output for a delivery manually?
Thanks,
Raghu.
I found that I can see the print preview of Picklist using transaction VL06P
Similar Messages
-
Hi Experts,
How can i stop pick list printing, i have assigned a print program which is used by all plants but I want to stop pick list printing for one of the plants.
Thanks
SatyaHi,
Go to T code OMLV and tick the printer where you don't want printing to happen.Hope this will solve your issue. -
Picking list cannot preview in Sales Order
Dear all expert,
I encounter problem in sales order with picking list in logistic tab being marked.
The system didn't allow picking list + order dialog box to allow to be choose & print.
There is similar setting & environment for another two companies. The picking list allow to print/preview in sales order. However, same scenario apply to company C, the picking list didn't allow to preview & print even the sales order logistic tab -> picking list being checked.
For your information, printing preference -> sales order -> print picking sheet had been marked as default.
Any idea & other configuration?
Thanks in advance.
Regards,
EricI dun think there is because of authorization issue. As the user was manager, superuser still recreate the same issue.
Any other suggestion from other? The question still not yet resolve..
Thanks for your suggestion.
Regards,
Eric
Edited by: Eric Tan Yan Liang on Aug 15, 2010 2:47 AM -
Pricing conditions are not picked in print preview of purchase order.
Dear experts
Purchase order was created for imports vendor.
there is difference of amount in purchase order and purchase order print preview.
In purchase order print preview the system is not picking the values of custom value and custom clearing charges.
Import pricing procedure is assigned to vendor.
what else more be checked since the print preview is not picking the conditions , custom value and custom clearing charges.
Any solutions.
Thanks & Regards.
Erfan.Hi,
Purchase order was created for imports vendor & must have separate documement type for Import Purchase order or new PO output type for import.
Check FORM or PDF/SmartForm Form used for your Import PO out put type for application EF in NACE t.code. Check SmartForm in t.code: SMARTFORMS and see condition types of custom value and custom clearing charges is there or not. Just consultant with ABAP consultant about condition types of custom value and custom clearing charges inclusion in SmartForm.
Regards,
Biju K -
Hi,
I have copied SD_PICK_SINGLE Layout and using standard RVADDN01 Program.
While Printing These Errors is coming :
Element HEADER_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
Element HEADER_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_PURCHASE_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_LINE_CONFIGURATION_BATCH_HEADER window MAIN is not defined for form
Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE ....
I dont know why these errors are coming as i have copied the standard layout form.
I have made a new output type 'YHPK' in 'V2' Shipping...
In this output type i have selected two processing routines:
1 Print output RVADDN01 ENTRY YHPK-PICK_SINGLE
2 Fax RVADDN01 ENTRY YHPK-PICK_SINGLE
While Debugging all the Elements are traveresed but the value is not populated.
As a result blank picking list only with heading is printed.
Please help me resolve this issue urgently....
Regards,
Abhishek
[email protected]Yes i even activated it for both DE and En Versions...
But the same problem
Message was edited by: Abhishek Bachhawat -
CO27 Picking List - Printer Setup
Hello All SAP Gurus,
I have a requirement to print the picking list using Transaction CO27 to a different SAP printer.
Could one of you guru please tell me how to configure the different printer for CO27.
Thanks for your help,
Best Regards,
GaryHi,
As per your query you have to consult with SD consultant, because they have to configure accofdingly.
Anil -
After EHP6 Upgarde Picking list print out is resulting format & overlapping issues
Hi All,
We have recently upgraded our system from ECC 6.0 to EHP6 .Now when user trying to print a Picking list document then Print out is overlapping with content .
But when we check the spool the Print Priview looks good but when trying to print the content is overlapping & observed the font size is chaned i.e. the content is displayed in Bold format .
But for those spools which were created before upgarde & when we give a print then Print out is fine. So some thing happend after upgrade that causing us the Print out problem .
we are using device type HPLJ4 & try to print Picking list output and it is causing problem.
Kindly provide your suggestions.
Thanks and regards,
DilipHello Peng Wen,
Thanks for your reply and yes the issue got resolved . Actually we are using a custom device type ZHPLJ4 which is a copy of HPLJ4 . But as part of Upgrade ZHPLJ4 HELVE with scalablity is no longer supported. So we have removed the entry from SE73 as it even doesnt exist in HPLJ4 . Now it is working as expected.
Thanks a lot for your replay.
Thanks and regards,
Dilip -
Hello Friends,
I have a printing issue with my client,
For specific customers they ship very large kits(BOM's) and require ship labels to print for each component listed on the picklist , in addition to the regular ship label for the header material YX.
These components are item category YF (purposely omitted for delivery note).
They do not want this to print of every customer, Please advice how we can add a logic to print shipping labels for components only for specific customers.
thanks;
Mikehi,
Currently i am working on similar object
We have developed Zprogram for the project. We are using bar code printer which is used to print the lables.
1. Developed a zprogram with selection screen child & parent material radio buttons. so whenver u click child material it will create label only for components apart from header material.
2.Program generates a text file with component details and downloads it to the Application server
3. Once the text fiole get downloaded & bar code printer is ON , it will automatically prints the labels. If the barcode printer is OFF, then u will be able to see the text files
Please find the Zprogram used, pls take help of ur ABAPER to cchnage the plants & details corresponding to ur setup
REPORT ZKITTAG message-id z_apd.
tables : mseg,
makt,
mkpf,
zmmstoragebin,
t001w,
mast,
stpo.
**SELECTION SCREEN
selection-screen : begin of block blk1 with frame title text-001.
parameters : p_werks type ekpo-werks obligatory.
parameters : s_mblnr type mseg-mblnr obligatory.
select-options : s_matnr for mseg-matnr obligatory no intervals
no-extension.
parameters:p_child radiobutton group rad,
p_parent radiobutton group rad.
*parameters : no type i.
selection-screen : end of block blk1.
data :begin of it_mseg_header occurs 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,"Kiran 28.06.2008
EBELN LIKE MSEG-EBELN,
MATNR LIKE MSEG-MATNR,
MENGE like mseg-menge,
BWTAR LIKE MSEG-BWTAR,
meins like mseg-meins,
MAKTX LIKE MAKT-MAKTX,
menge1(19),
STORAGE LIKE ZMMSTORAGEBIN-STORAGE, "Sridhar on 22082005
WERKS LIKE MSEG-WERKS, "Sridhar on 22082005
end of it_mseg_header.
data: menge1 like mseg-menge.
DATA : BEGIN OF IT_MSEG_CHILD OCCURS 0,
MBLNR LIKE MSEG-MBLNR,
MJAHR LIKE MSEG-MJAHR,
EBELN LIKE MSEG-EBELN,
WERKS LIKE MSEG-WERKS,
MATNR1 LIKE MSEG-MATNR, " HEADER PARTNO
MATNR LIKE MSEG-MATNR,
MAKTX LIKE MAKT-MAKTX,
BWTAR LIKE MSEG-BWTAR,
MEINS LIKE MSEG-MEINS,
STORAGE LIKE ZMMSTORAGEBIN-STORAGE,
HQTY LIKE MSEG-MENGE, " HEADER QTY
MENGE LIKE MSEG-MENGE, " CHILD QTY
SUMQTY LIKE MSEG-MENGE, "SUM OF CHILD QTY FOR SAME PARTS
QTPKIT LIKE MSEG-MENGE, " QTY PER KIT
PQTY LIKE MSEG-MENGE, " PRINT QTY
PQTY1 LIKE MSEG-MENGE, " PRINT QTY 1
QUO TYPE I,
REM LIKE MSEG-MENGE ,
MENGE2(19),
MENGE3(16),
MENGE4(19),
MENGE5(16),
END OF IT_MSEG_CHILD.
DATA: TEMPQUO LIKE MSEG-MENGE,TEMPREM LIKE MSEG-MENGE,
TEMPHQTY LIKE MSEG-MENGE,TEMPSUMQTY LIKE MSEG-MENGE,
CMPVAL LIKE MSEG-MENGE.
data: v_bktxt type mkpf-bktxt.
data: sum like mseg-menge.
data : prod(13).
data : n1(2) type n.
data : n2(2) type n.
data : n3(2) type n.
data : n4(2) type n.
data : c1(2) type n value 1.
data : dsn(150).
data : dsn1(100).
data : number(3).
data : file(50) value 'E:\userdata\Barcode_kittags\kit00' .
Data : file1(50) value 'E:\userdata\Barcode_kittags\kit00' .
Data for server details
data : host1 like syst-host.
data : sysid like syst-sysid.
RANGES : r_werks FOR mseg-werks.
*AT SELECTION SCREEN.*
at selection-screen.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = 'WK01'.
APPEND r_werks.
r_werks-low = 'CQ01'.
APPEND r_werks.
if p_werks not in r_werks.
message 'Plant should be either plant1 or plant2' TYPE 'E'.
endif.
select single werks into t001w-werks from t001w
where werks eq p_werks.
if sy-subrc <> 0.
message e000(z_apd) with 'Invalid Plant...Please Check'.
endif.
select single mblnr into mseg-mblnr from mseg
where mblnr eq s_mblnr.
if sy-subrc <> 0.
message e000(z_apd) with 'Invalid Material Doc...Please Check'.
endif.
start-of-selection.
perform get_data.
if p_child eq 'X'.
if it_mseg_child is initial.
No Details Available
message i017(z_apd) with text-002.
exit.
else.
host1 = syst-host.
sysid = syst-sysid.
n1 = 1.
**Sorting according parent material and child parts
sort it_mseg_child by matnr1 matnr.
loop at it_mseg_child.
if p_werks = 'WK01'.
concatenate file n1 '.PJ' into dsn.
ENDIF.
if p_werks = 'CQ01'.
concatenate file1 n1 '.PJ' into dsn.
ENDIF.
perform write_data.
clear dsn.
n1 = n1 + 1.
endloop.
message i017(z_apd) with TExt-003."'File Has Been Created'.
clear: it_mseg_child, it_mseg_child.
refresh : it_mseg_child, it_mseg_child.
endif.
else.
if it_mseg_header is initial.
No Details Available
message i017(z_apd) with text-002.
exit.
else.
host1 = syst-host.
sysid = syst-sysid.
n1 = 1.
**Sorting according parent material and child parts
sort it_mseg_header by matnr.
loop at it_mseg_header .
if p_werks = 'WK01'.
concatenate file n1 '.PJ' into dsn.
ENDIF.
if p_werks = 'CQ01'.
concatenate file1 n1 '.PJ' into dsn.
ENDIF.
n2 = it_mseg_header-menge.
perform write_data1.
clear dsn.
n1 = n1 + 1.
endloop.
message i017(z_apd) with TExt-003."'File Has Been Created'.
clear: it_mseg_header, it_mseg_header.
refresh : it_mseg_header, it_mseg_header.
endif.
endif.
end-of-selection.
*& Form get_data
text
FORM get_data .
AUTHORITY-CHECK OBJECT 'ZPLANT'
ID 'WERKS' FIELD P_WERKS.
IF SY-SUBRC NE 0.
message E006(zmess) with text-009 p_werks.
endif.
select a~mblnr
a~mjahr
a~ebeln
a~matnr
a~menge
a~bwtar
a~meins
a~werks
from mseg as a
inner join mkpf as b
on amblnr = bmblnr and
amjahr = bmjahr
into corresponding fields of table it_mseg_header
where
a~WERKS = p_werks
and b~mblnr = s_mblnr
and a~matnr in s_matnr
and a~BWART = '101'.
loop at it_mseg_header.
select single maktx from makt into
(it_mseg_header-maktx)
where matnr = it_mseg_header-matnr.
select single storage into (it_mseg_header-storage)
from ZMMSTORAGEBIN
where WERKS = it_mseg_header-WERKS
and MATNR = it_mseg_header-MATNR and
BWTAR = it_mseg_header-BWTAR.
move '1.000' to it_mseg_header-menge1.
CONCATENATE it_mseg_header-MENGE1 it_mseg_header-meins INTO
it_mseg_header-menge1 .
modify it_mseg_header transporting maktx menge1.
SELECT DISTINCT AMBLNR aMJAHR aWERKS aMEINS aEBELN aMATNR a~BWTAR
a~MENGE
INTO CORRESPONDING FIELDS OF TABLE IT_MSEG_CHILD
FROM MSEG AS A INNER JOIN MKPF AS B
ON AMBLNR = BMBLNR AND
AMJAHR = BMJAHR
WHERE A~MBLNR = IT_MSEG_HEADER-MBLNR
AND A~MJAHR = IT_MSEG_HEADER-MJAHR
AND A~BWART = '543'
AND A~WERKS = IT_MSEG_HEADER-WERKS
AND A~EBELN = IT_MSEG_HEADER-EBELN.
*AND A~BWART = '541'.
endloop.
loop at it_mseg_child.
SELECT SINGLE SUM( MENGE )
INTO (TEMPSUMQTY)
FROM MSEG
WHERE MBLNR = IT_MSEG_CHILD-MBLNR
AND MJAHR = IT_MSEG_CHILD-MJAHR
AND WERKS = IT_MSEG_CHILD-WERKS
AND EBELN = IT_MSEG_CHILD-EBELN
AND MATNR = IT_MSEG_CHILD-MATNR
AND BWART = '543'.
select single maktx
into it_mseg_child-maktx
from makt
where matnr = it_mseg_child-matnr.
select single matnr MENGE
into (it_mseg_child-matnr1,TEMPHQTY)
from mseg
where mblnr = it_mseg_child-mblnr
and mjahr = it_mseg_child-mjahr
and werks = it_mseg_child-werks
and ebeln = it_mseg_child-ebeln
and bwart = '101'.
select single storage
into (it_mseg_child-storage)
from ZMMSTORAGEBIN
where WERKS = it_mseg_child-WERKS
and MATNR = it_mseg_child-MATNR and
BWTAR = it_mseg_child-BWTAR.
IT_MSEG_CHILD-QTPKIT = TEMPSUMQTY / TEMPHQTY.
IT_MSEG_CHILD-SUMQTY = TEMPSUMQTY.
IT_MSEG_CHILD-HQTY = TEMPHQTY.
modify it_mseg_child.
endloop.
DELETE ADJACENT DUPLICATES FROM it_mseg_child.
LOOP AT IT_MSEG_CHILD.
IT_MSEG_CHILD-QUO = IT_MSEG_CHILD-MENGE DIV IT_MSEG_CHILD-QTPKIT.
IT_MSEG_CHILD-REM = IT_MSEG_CHILD-MENGE MOD IT_MSEG_CHILD-QTPKIT.
it_mseg_child-MENGE3 = it_mseg_child-QTPKIT.
condense it_mseg_child-MENGE3.
CONCATENATE it_mseg_child-MENGE3 it_mseg_child-MEins INTO
it_mseg_child-MENGE2 .
condense it_mseg_child-MENGE2 .
it_mseg_child-MENGE4 = IT_MSEG_CHILD-REM.
condense it_mseg_child-MENGE4.
CONCATENATE it_mseg_child-MENGE4 it_mseg_child-MEins INTO
it_mseg_child-MENGE5 .
condense it_mseg_child-MENGE5 .
MODIFY IT_MSEG_CHILD.
ENDLOOP.
ENDFORM. " get_data
*& Form write_data
text
FORM write_data .
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
exit.
endif.
transfer 'KTN.LBL' to dsn.
SORT IT_MSEG_CHILD BY EBELN STORAGE.
LOOP AT IT_MSEG_CHILD.
IF IT_MSEG_CHILD-QUO > 0."uncommented
IF IT_MSEG_CHILD-REM = 0."commented
n3 = IT_MSEG_CHILD-QUO.
do n3 times.
transfer 'KTN.LBL' to dsn.
MOVE 1 TO NUMBER.
MOVE IT_MSEG_CHILD-QUO TO NUMBER."commented
MOVE IT_MSEG_CHILD-QTPKIT TO NUMBER."commented
condense number.
transfer number to dsn.
transfer : it_mseg_child-EBELN to dsn,
it_mseg_child-matnr1 to dsn,
it_mseg_child-matnr to dsn,
it_mseg_child-maktx to dsn,
it_mseg_child-MENGE2 to dsn,
it_mseg_child-bwtar to dsn.
transfer it_mseg_child-storage to dsn.
transfer space to dsn.
c1 = c1 + 1.
if c1 = 8.
clear c1.
close dataset dsn.
clear dsn.
n1 = n1 + 1.
if p_werks = 'WK01'.
concatenate file n1 '.PJ' into dsn.
ENDIF.
if p_werks = 'CQ01'.
concatenate file1 n1 '.PJ' into dsn.
ENDIF.
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
exit.
endif.
endif.
enddo.
ENDIF.
IF IT_MSEG_CHILD-REM > 0.
n4 = IT_MSEG_CHILD-REM.
do 1 times.
transfer 'KTN.LBL' to dsn.
MOVE 1 TO NUMBER."uncommented
MOVE IT_MSEG_CHILD-REM TO NUMBER."commented
condense number.
transfer number to dsn.
transfer : it_mseg_child-EBELN to dsn,
it_mseg_child-matnr1 to dsn,
it_mseg_child-matnr to dsn,
it_mseg_child-maktx to dsn,
it_mseg_child-MENGE5 to dsn,
it_mseg_child-bwtar to dsn.
transfer it_mseg_child-storage to dsn.
transfer space to dsn.
c1 = c1 + 1.
if c1 = 8.
clear c1.
close dataset dsn.
clear dsn.
n1 = n1 + 1.
if p_werks = 'WK01'.
concatenate file n1 '.PJ' into dsn.
ENDIF.
if p_werks = 'CQ01'.
concatenate file1 n1 '.PJ' into dsn.
ENDIF.
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
exit.
endif.
endif.
enddo.
ENDIF.
ENDLOOP.
close dataset dsn.
ENDFORM. " write_data
*& Form write_data1
text
FORM write_data1 .
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
exit.
endif.
SORT IT_MSEG_HEADER BY EBELN .
LOOP AT IT_MSEG_HEADER.
do n2 times.
transfer 'KTN.LBL' to dsn.
MOVE 1 TO NUMBER.
condense number.
transfer number to dsn.
transfer : it_mseg_header-EBELN to dsn,
it_mseg_header-matnr to dsn,
it_mseg_header-matnr to dsn,
it_mseg_header-maktx to dsn,
it_mseg_header-MENGE1 to dsn,
it_mseg_header-bwtar to dsn,
it_mseg_header-storage to dsn.
transfer space to dsn.
c1 = c1 + 1.
if c1 = 8.
clear c1.
close dataset dsn.
clear dsn.
n1 = n1 + 1.
if p_werks = 'WK01'.
concatenate file n1 '.PJ' into dsn.
ENDIF.
if p_werks = 'CQ01'.
concatenate file1 n1 '.PJ' into dsn.
ENDIF.
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
exit.
endif.
endif.
*ENDLOOP.
enddo.
close dataset dsn.
ENDFORM. " write_data1
hope this shelps u
regards,
Arun prasad -
How to preview pick list ?
Hi all ,
i want to preview the pick list , Because the picking document should be printed at the moment of release , the transaction code should be COR2. but i still cannot get the pick list layout , anyone know the test scenario of getting the pick list layout when release a process order?
best regards
KevinHi Kevin,
plz go through d given below link
how to see the print preview of production order
pick list print preview
May u got d solution.
regards,
Archana -
hi -
I had a Pick List printed. But the document got accidently destroyed before the Picking could take place.
I used VL02n and under output for Picking, i tried to run the Output again, but the area is greayed out and i am unable to put the condition type EK00 to re-print the pick list.
Is there any other way in Standard SAP to reprint the Pick list.
Any suggestions or recommendations !!!Hi,
*If you have configured LL01 report in your system* you can take print out of pick list for the inconfirmed transfer orders. In report you have to set up layout to take bin details.
Hope this meet your requirment.
Regards,
Prashant -
System variable for Warehouse name in Pick list PLD
Hi Experts,
My customer would like to show the Warehouse name on the Pick List print layout.
What is the System Variable to display the Warehouse name on the Pick List?. Iu2019m working with Sap Business One 2007A.. Where can I find the system variables for Chile localization. Thanks Very Much
ClaudiaHi Claudio,
Try this,
->> Open the Pick List(System) PLD and Save as the New PLD.
->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
Table -> OWHS - WareHouse
Column -> WhsName - WareHouse Name
Save as and Run the Print Preview.
IF will not print the WareHouse Name in Print.
Do this in PLD.
->> Open your PLD.
--> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
Regards,
Madhan. -
Problem in generation of Picking list
Hi friends,
The scenario: Picking list is printed as soon as the delivery is saved. The program and layout are working fine.
Example: let a delivery is being saved with reference to a sales order with only one line item ( for simplicity), and let the quantity to be delivered that is delivery quantity (LIPSD-G_LFIMG, on screen) be 2, now there are three cases:
1. before saving the delivery if NO Picking quantity (LIPSD-PIKMG, on screen) is entered, The picking list is printed, here the field VBUP-KOSTA (picking status field) is having value 'A', and field VBUK-KOSTK(Overall Picking status)is also having value 'A', and the picking list is printed.
2. before saving the delivery if Picking quantity (LIPSD-PIKMG, on screen) is entered as 1, the field VBUP-KOSTA (picking status field) is having value 'B', and field VBUK-KOSTK( Overall Picking status) is also having value 'B', and the picking list is printed.
3. before saving the delivery if Picking quantity (LIPSD-PIKMG, on screen) is entered as 2, the field VBUP-KOSTA (picking status field) is having value 'C', and field VBUK-KOSTK( Overall Picking status) is also having value 'C', and the picking list is NOT printed.
I think the check is only done on VBUK-KOSTK for the picking list print, as in case 3, i changed the value of VBUK-KOSTK back to 'A' by using the user exit USEREXIT_SET_STATUS_VBUK in include LV45P079 as a result of which the picking list was printed, but it also stored the VBUK-KOSTK value as 'A' in the database table which is undesirable, as it should be saved with its earlier value, before it was explicitly made 'A'.
So, my requirement is to Print the picking list, even if the delivery quantity and picking quantity is same for any number of line items.
How can i solve this problem?? Speedy help requested.
thanks,
Sharon.Hi Sharon,
Looks like you need this pick list no matter what the status of the document is and what the picking relevancy is. Why don't you create an output type that is assigned to the document all the time and then create this form as it is. If you are trying to use the standard output type and standard form and standard routine, then system is going to behave the standard way, that is to create a pick list when it is relevant for picking and only if the status is not complete. The system logic is that a pick list is supposed to tell your warehouse as to what needs to be picked and if there is nothing to be picked or if the item not relevant for the picking then it doesn't need to be there on this list.
So if you want a list similar to the pick list, have the logic replicated minus the pre-conditions about picking status etc, have the form copied and then create and assign it to a new output type.
Regards,
Srinivas -
Is it possible to have the pick list print (EK00) automatically even if the delivery is relevant for warehouse management? The users would rather use this output than the transfer order document via WMTA.
Thanks,
RonHi Ron,
I think with a small modification to the driver program of EK00 output type; you can get this output printed automatically in background even for a warehouse managed materials.
Driver program: RVADEK01 can be copied into ZRVADEK01 and modify this to accommodate the requirement.
I dont think EK00 alone can be used to print for warehouse materials in delivery.
Hope this helps!
Regards,
Syed Nasir -
hi, we're using WM which needs to print picking list for picking(TO), i would like to know how the picking list is determined, i mean the logic setup for picking list, where is the path for config in the system.
i knew that if we are using by Tcode to print picking list that doesn't need output type? otherwise we have to setup the output type for picking list printing. is that true! what is the relationship between Tcode printing and output type? could someone explain to me. thanks
Edited by: qgjddcel on Sep 5, 2008 4:36 PM
Edited by: qgjddcel on Sep 5, 2008 4:45 PMUse transaction code NACE for using the o/p determination
Then select V2 for shipping as you are creating o/p for delivery
Create table, maintain access sequence, maintain output type and assign o/p to procedure. Then create the master record in VV21. In o/p you have std functionality to use EDI, email, Print, Fax, ALE
if you are having problem using NACE transaction, use this flow:
SPRO>Logistics Execution>Shipping>Basic Functions>Output Control>Outpur determination>maintain o/p determination for outbound deliveries.
reward points if helpful
Message was edited by:
Comes Naturally -
Print preview in abap list format (OMLV) - Need preview in graphical format
Dear All
I am facing a problem with the print preview. (transaction code OMLV)
When i am clicking on print preview button the system is displaying the output in a ABAP list format.
and also the printout shows only the ABAP content.
Pl. advise on how to view the print preview in a graphical format and not in the ABAP list format and pl. let me know the setting to print the spool in the graphical format.
Thanks,
MaxxHi,
this problem is not only related to warehouse. even the print preview spool for GR/GI slip in t-code SP01 shows as ABAP list and not as graphical screen.
my question is why does the system shows the print preview for spool as an ABAP list instead of graphical view.
pl. advise
Thanks,
Maxx
Maybe you are looking for
-
sir this reply i received from you - " You're welcome. Once you phone is in recovery mode, as is is now, you no longer have the option to back it up. Your only now is to restore it. Restoring the phone will erase it, then give you the option at the e
-
Tips on how to write efficient java code for java mapping
hi I do not have much knowledge in Java Can anybody tell me some tips on how to write efficient and optimised java code to be used in java mapping Thanks, Loveena
-
Is there any way of searching, in Reader XI (using Windows XP, for example), for special characters such as u-unlaut, e-acute, or the math'Scientific symbol 6,29 (a small black upward-pointing triangle)?
-
Playing .mkv with mplayer-vdpau does not work
Hi, My System is a Atom 330 with an Nvidia ION. The Atom is running at 2 GHz. I installed the mplayer-vdpau-svn from aur. With this i tried to play a .mkv file. Without the vdpau parameters the Movie is running, but too slow. When i use the parameter
-
I have a Blusens M94 TV and I want to view movies and fotos (MP4s and jpegs) using an eternal hard drive plugged into the tv. I used OSX to format the 500 GB WD as FAT 32 as required by Blusens, but the TV will not recognize files I have written with