Pick list printing

Hi Experts,
How can i stop pick list printing, i have assigned a print program which is used by all plants but I want to stop pick list printing for one of the plants.
Thanks
Satya

Hi,
Go to T code OMLV and tick the printer where you don't want printing to happen.Hope this will solve your issue.

Similar Messages

Pick list print preview

Hi all,
How can I view the print preview of pick list output type EK00?
When I get to the Picking output from VT02N, it only shows me the status of the output generated.
But I can't see the print preview.
Also can I generate Ek00 output for a delivery manually?
Thanks,
Raghu.

I found that I can see the print preview of Picklist using transaction VL06P

Picking List Printing Problem

Hi,
I have copied SD_PICK_SINGLE Layout and using standard RVADDN01 Program.
While Printing These Errors is coming :
Element HEADER_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
Element HEADER_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_TEXT window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_PURCHASE_DATA window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE
Element ITEM_LINE_CONFIGURATION_BATCH_HEADER window MAIN is not defined for form
Element ITEM_LINE_BATCH window MAIN is not defined for form YHPK-PICK_SINGLE    ....
I dont know why these errors are coming as i have copied the standard layout form.
I have made a new output type 'YHPK' in 'V2' Shipping...
In this output type i have selected two processing routines:
1     Print output RVADDN01     ENTRY     YHPK-PICK_SINGLE
2     Fax          RVADDN01     ENTRY     YHPK-PICK_SINGLE
While Debugging all the Elements are traveresed but the value is not populated.
As a result blank picking list only with heading is printed.
Please help me resolve this issue urgently....
Regards,
Abhishek
[email protected]

Yes i even activated it for both DE and En Versions...
But the same problem
Message was edited by: Abhishek Bachhawat

CO27 Picking List - Printer Setup

Hello All SAP Gurus,
I have a requirement to print the picking list using Transaction CO27 to a different SAP printer.
Could one of you guru please tell me how to configure the different printer for CO27.
Thanks for your help,
Best Regards,
Gary

Hi,
As per your query you have to consult with SD consultant, because they have to configure accofdingly.
Anil

After EHP6 Upgarde Picking list print out is resulting format & overlapping issues

Hi All,
We have recently upgraded our system from ECC 6.0 to EHP6 .Now when user trying to print a Picking list document then Print out is overlapping with content .
But when we check the spool the Print Priview looks good but when trying to print the content is overlapping & observed the font size is chaned i.e. the content is displayed in Bold format .
But for those spools which were created before upgarde & when we give a print then Print out is fine. So some thing happend after upgrade that causing us the Print out problem .
we are using device type HPLJ4 & try to print Picking list output and it is causing problem.
Kindly provide your suggestions.
Thanks and regards,
Dilip

Hello Peng Wen,
Thanks for your reply and yes the issue got resolved . Actually we are using a custom device type ZHPLJ4 which is a copy of HPLJ4 . But as part of Upgrade ZHPLJ4 HELVE with scalablity is no longer supported. So we have removed the entry from SE73 as it even doesnt exist in HPLJ4 . Now it is working as expected.
Thanks a lot for your replay.
Thanks and regards,
Dilip

Pick list print issue?

Hello Friends,
I have a printing issue with my client,
For specific customers they ship very large kits(BOM's) and require ship labels to print for each component listed on the picklist , in addition to the regular ship label for the header material YX.
These components are item category YF (purposely omitted for delivery note).
They do not want this to print of every customer, Please advice how we can add a logic to print shipping labels for components only for specific customers.
thanks;
Mike

hi,
Currently i am working on similar object
We have developed Zprogram for the project. We are using bar code printer which is used to print the lables.
1. Developed a zprogram with selection screen child & parent material radio buttons. so whenver u click child material it will create label only for components apart from header material.
2.Program generates a text file with component details and downloads it to the Application server
3. Once the text fiole get downloaded & bar code printer is ON , it will automatically prints the labels. If the barcode printer is OFF, then u will be able to see the text files
Please find the Zprogram used, pls take help of ur ABAPER to cchnage the plants & details corresponding to ur setup
REPORT ZKITTAG message-id z_apd.
tables : mseg,
         makt,
         mkpf,
         zmmstoragebin,
         t001w,
         mast,
         stpo.
**SELECTION SCREEN
selection-screen : begin of block blk1 with frame title text-001.
parameters        : p_werks type ekpo-werks obligatory.
parameters        : s_mblnr type mseg-mblnr obligatory.
select-options   : s_matnr for mseg-matnr obligatory no intervals
no-extension.
parameters:p_child radiobutton group rad,
           p_parent radiobutton group rad.
*parameters        : no      type i.
selection-screen : end of block blk1.
data :begin of it_mseg_header occurs 0,
      MBLNR LIKE MSEG-MBLNR,
      MJAHR LIKE MSEG-MJAHR,"Kiran 28.06.2008
      EBELN LIKE MSEG-EBELN,
      MATNR LIKE MSEG-MATNR,
      MENGE like mseg-menge,
      BWTAR LIKE MSEG-BWTAR,
      meins like mseg-meins,
      MAKTX LIKE MAKT-MAKTX,
      menge1(19),
      STORAGE LIKE ZMMSTORAGEBIN-STORAGE, "Sridhar on 22082005
      WERKS LIKE MSEG-WERKS,               "Sridhar on 22082005
end of it_mseg_header.
data: menge1 like mseg-menge.
DATA : BEGIN OF IT_MSEG_CHILD OCCURS 0,
        MBLNR LIKE MSEG-MBLNR,
        MJAHR LIKE MSEG-MJAHR,
        EBELN LIKE MSEG-EBELN,
        WERKS LIKE MSEG-WERKS,
        MATNR1 LIKE MSEG-MATNR, " HEADER PARTNO
        MATNR LIKE MSEG-MATNR,
        MAKTX LIKE MAKT-MAKTX,
        BWTAR LIKE MSEG-BWTAR,
        MEINS LIKE MSEG-MEINS,
        STORAGE LIKE ZMMSTORAGEBIN-STORAGE,
        HQTY LIKE MSEG-MENGE, " HEADER QTY
        MENGE LIKE MSEG-MENGE, " CHILD QTY
        SUMQTY LIKE MSEG-MENGE, "SUM OF CHILD QTY FOR SAME PARTS
        QTPKIT LIKE MSEG-MENGE, " QTY PER KIT
        PQTY LIKE MSEG-MENGE, " PRINT QTY
        PQTY1 LIKE MSEG-MENGE, " PRINT QTY 1
        QUO TYPE I,
        REM LIKE MSEG-MENGE ,
        MENGE2(19),
        MENGE3(16),
        MENGE4(19),
        MENGE5(16),
      END OF IT_MSEG_CHILD.
DATA: TEMPQUO LIKE MSEG-MENGE,TEMPREM LIKE MSEG-MENGE,
        TEMPHQTY LIKE MSEG-MENGE,TEMPSUMQTY LIKE MSEG-MENGE,
        CMPVAL LIKE MSEG-MENGE.
data: v_bktxt type mkpf-bktxt.
data: sum like mseg-menge.
data : prod(13).
data : n1(2) type n.
data : n2(2) type n.
data : n3(2) type n.
data : n4(2) type n.
data : c1(2) type n value 1.
data : dsn(150).
data : dsn1(100).
data : number(3).
data : file(50) value 'E:\userdata\Barcode_kittags\kit00' .
Data : file1(50) value 'E:\userdata\Barcode_kittags\kit00' .
Data for server details
data : host1 like syst-host.
data : sysid like syst-sysid.
RANGES : r_werks FOR mseg-werks.
*AT SELECTION SCREEN.*
at selection-screen.
r_werks-sign = 'I'.
r_werks-option = 'EQ'.
r_werks-low = 'WK01'.
APPEND r_werks.
r_werks-low = 'CQ01'.
APPEND r_werks.
if p_werks not in r_werks.
message 'Plant should be either plant1 or plant2' TYPE 'E'.
endif.
select single werks into t001w-werks from t001w
         where werks eq p_werks.
if sy-subrc <> 0.
    message e000(z_apd) with 'Invalid Plant...Please Check'.
endif.
select single mblnr into mseg-mblnr from mseg
         where mblnr eq s_mblnr.
if sy-subrc <> 0.
    message e000(z_apd) with 'Invalid Material Doc...Please Check'.
endif.
start-of-selection.
perform get_data.
if p_child eq 'X'.
    if it_mseg_child is initial.
   No Details Available
      message i017(z_apd) with text-002.
      exit.
    else.
      host1 = syst-host.
      sysid = syst-sysid.
      n1 = 1.
**Sorting according parent material and child parts
      sort it_mseg_child by matnr1 matnr.
loop at it_mseg_child.
      if p_werks = 'WK01'.
        concatenate file n1 '.PJ' into dsn.
      ENDIF.
      if p_werks = 'CQ01'.
        concatenate file1 n1 '.PJ' into dsn.
      ENDIF.
      perform write_data.
      clear dsn.
      n1 = n1 + 1.
endloop.
      message i017(z_apd) with TExt-003."'File Has Been Created'.
      clear: it_mseg_child, it_mseg_child.
      refresh : it_mseg_child, it_mseg_child.
    endif.
else.
    if it_mseg_header is initial.
   No Details Available
      message i017(z_apd) with text-002.
      exit.
    else.
      host1 = syst-host.
      sysid = syst-sysid.
      n1 = 1.
**Sorting according parent material and child parts
      sort it_mseg_header by matnr.
loop at it_mseg_header .
      if p_werks = 'WK01'.
        concatenate file n1 '.PJ' into dsn.
      ENDIF.
      if p_werks = 'CQ01'.
        concatenate file1 n1 '.PJ' into dsn.
      ENDIF.
      n2 = it_mseg_header-menge.
      perform write_data1.
      clear dsn.
      n1 = n1 + 1.
endloop.
      message i017(z_apd) with TExt-003."'File Has Been Created'.
      clear: it_mseg_header, it_mseg_header.
      refresh : it_mseg_header, it_mseg_header.
    endif.
endif.
end-of-selection.
*&      Form get_data
      text
FORM get_data .
AUTHORITY-CHECK OBJECT 'ZPLANT'
ID 'WERKS' FIELD P_WERKS.
IF SY-SUBRC NE 0.
    message E006(zmess) with text-009 p_werks.
endif.
select a~mblnr
         a~mjahr
         a~ebeln
         a~matnr
         a~menge
         a~bwtar
         a~meins
         a~werks
   from mseg as a
   inner join mkpf as b
   on amblnr = bmblnr and
       amjahr = bmjahr
into corresponding fields of table it_mseg_header
where
a~WERKS = p_werks
and b~mblnr = s_mblnr
and a~matnr in s_matnr
and a~BWART = '101'.
loop at it_mseg_header.
    select single maktx from makt into
           (it_mseg_header-maktx)
           where matnr = it_mseg_header-matnr.
    select single storage into (it_mseg_header-storage)
    from ZMMSTORAGEBIN
    where WERKS = it_mseg_header-WERKS
    and MATNR = it_mseg_header-MATNR and
    BWTAR = it_mseg_header-BWTAR.
    move '1.000' to it_mseg_header-menge1.
    CONCATENATE it_mseg_header-MENGE1 it_mseg_header-meins INTO
    it_mseg_header-menge1 .
    modify it_mseg_header transporting maktx menge1.
SELECT DISTINCT AMBLNR aMJAHR aWERKS aMEINS aEBELN aMATNR a~BWTAR
a~MENGE
INTO CORRESPONDING FIELDS OF TABLE IT_MSEG_CHILD
FROM MSEG AS A INNER JOIN MKPF AS B
ON AMBLNR = BMBLNR AND
   AMJAHR = BMJAHR
WHERE A~MBLNR = IT_MSEG_HEADER-MBLNR
AND A~MJAHR = IT_MSEG_HEADER-MJAHR
AND A~BWART = '543'
AND A~WERKS = IT_MSEG_HEADER-WERKS
AND A~EBELN = IT_MSEG_HEADER-EBELN.
*AND A~BWART = '541'.
endloop.
loop at it_mseg_child.
    SELECT SINGLE SUM( MENGE )
    INTO (TEMPSUMQTY)
    FROM MSEG
    WHERE MBLNR = IT_MSEG_CHILD-MBLNR
    AND MJAHR = IT_MSEG_CHILD-MJAHR
    AND WERKS = IT_MSEG_CHILD-WERKS
    AND EBELN = IT_MSEG_CHILD-EBELN
    AND MATNR = IT_MSEG_CHILD-MATNR
    AND BWART = '543'.
    select single maktx
    into it_mseg_child-maktx
    from makt
    where matnr = it_mseg_child-matnr.
    select single matnr MENGE
    into (it_mseg_child-matnr1,TEMPHQTY)
    from mseg
    where mblnr = it_mseg_child-mblnr
    and mjahr   = it_mseg_child-mjahr
    and werks   = it_mseg_child-werks
    and ebeln   = it_mseg_child-ebeln
    and bwart = '101'.
    select single storage
    into (it_mseg_child-storage)
    from ZMMSTORAGEBIN
    where WERKS = it_mseg_child-WERKS
    and MATNR = it_mseg_child-MATNR and
    BWTAR = it_mseg_child-BWTAR.
    IT_MSEG_CHILD-QTPKIT = TEMPSUMQTY / TEMPHQTY.
    IT_MSEG_CHILD-SUMQTY = TEMPSUMQTY.
    IT_MSEG_CHILD-HQTY = TEMPHQTY.
    modify it_mseg_child.
endloop.
DELETE ADJACENT DUPLICATES FROM it_mseg_child.
LOOP AT IT_MSEG_CHILD.
    IT_MSEG_CHILD-QUO = IT_MSEG_CHILD-MENGE DIV IT_MSEG_CHILD-QTPKIT.
    IT_MSEG_CHILD-REM = IT_MSEG_CHILD-MENGE MOD IT_MSEG_CHILD-QTPKIT.
    it_mseg_child-MENGE3 = it_mseg_child-QTPKIT.
    condense it_mseg_child-MENGE3.
    CONCATENATE it_mseg_child-MENGE3 it_mseg_child-MEins INTO
    it_mseg_child-MENGE2 .
    condense it_mseg_child-MENGE2 .
    it_mseg_child-MENGE4 = IT_MSEG_CHILD-REM.
    condense it_mseg_child-MENGE4.
    CONCATENATE it_mseg_child-MENGE4 it_mseg_child-MEins INTO
    it_mseg_child-MENGE5 .
    condense it_mseg_child-MENGE5 .
    MODIFY IT_MSEG_CHILD.
ENDLOOP.
ENDFORM.                    " get_data
*&      Form write_data
      text
FORM write_data .
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
    exit.
endif.
transfer 'KTN.LBL' to dsn.
SORT IT_MSEG_CHILD BY EBELN STORAGE.
LOOP AT IT_MSEG_CHILD.
   IF IT_MSEG_CHILD-QUO > 0."uncommented
IF IT_MSEG_CHILD-REM = 0."commented
n3 = IT_MSEG_CHILD-QUO.
do n3 times.
transfer 'KTN.LBL' to dsn.
   MOVE 1 TO NUMBER.
MOVE IT_MSEG_CHILD-QUO TO NUMBER."commented
MOVE IT_MSEG_CHILD-QTPKIT TO NUMBER."commented
        condense number.
        transfer number to dsn.
        transfer : it_mseg_child-EBELN to dsn,
                   it_mseg_child-matnr1 to dsn,
                   it_mseg_child-matnr to dsn,
                   it_mseg_child-maktx to dsn,
                   it_mseg_child-MENGE2 to dsn,
                   it_mseg_child-bwtar to dsn.
        transfer it_mseg_child-storage to dsn.
        transfer space to dsn.
        c1 = c1 + 1.
        if c1 = 8.
          clear c1.
          close dataset dsn.
          clear dsn.
          n1 = n1 + 1.
          if p_werks = 'WK01'.
            concatenate file n1 '.PJ' into dsn.
          ENDIF.
          if p_werks = 'CQ01'.
            concatenate file1 n1 '.PJ' into dsn.
          ENDIF.
          open dataset dsn for output in text mode encoding default.
          if sy-subrc <> 0.
            exit.
          endif.
        endif.
      enddo.
    ENDIF.
    IF IT_MSEG_CHILD-REM > 0.
n4 = IT_MSEG_CHILD-REM.
     do 1 times.
      transfer 'KTN.LBL' to dsn.
      MOVE 1 TO NUMBER."uncommented
MOVE IT_MSEG_CHILD-REM TO NUMBER."commented
        condense number.
        transfer number to dsn.
        transfer : it_mseg_child-EBELN to dsn,
                   it_mseg_child-matnr1 to dsn,
                   it_mseg_child-matnr to dsn,
                   it_mseg_child-maktx to dsn,
                   it_mseg_child-MENGE5 to dsn,
                   it_mseg_child-bwtar to dsn.
        transfer it_mseg_child-storage to dsn.
        transfer space to dsn.
        c1 = c1 + 1.
        if c1 = 8.
          clear c1.
          close dataset dsn.
          clear dsn.
          n1 = n1 + 1.
          if p_werks = 'WK01'.
            concatenate file n1 '.PJ' into dsn.
          ENDIF.
          if p_werks = 'CQ01'.
            concatenate file1 n1 '.PJ' into dsn.
          ENDIF.
          open dataset dsn for output in text mode encoding default.
          if sy-subrc <> 0.
            exit.
          endif.
        endif.
      enddo.
    ENDIF.
ENDLOOP.
close dataset dsn.
ENDFORM.                    " write_data
*&      Form write_data1
      text
FORM write_data1 .
open dataset dsn for output in text mode encoding default.
if sy-subrc <> 0.
    exit.
endif.
SORT IT_MSEG_HEADER BY EBELN .
LOOP AT IT_MSEG_HEADER.
do n2 times.
    transfer 'KTN.LBL' to dsn.
    MOVE 1 TO NUMBER.
    condense number.
    transfer number to dsn.
    transfer : it_mseg_header-EBELN to dsn,
               it_mseg_header-matnr to dsn,
               it_mseg_header-matnr to dsn,
               it_mseg_header-maktx to dsn,
               it_mseg_header-MENGE1 to dsn,
               it_mseg_header-bwtar to dsn,
               it_mseg_header-storage to dsn.
    transfer space to dsn.
    c1 = c1 + 1.
    if c1 = 8.
      clear c1.
      close dataset dsn.
      clear dsn.
      n1 = n1 + 1.
      if p_werks = 'WK01'.
        concatenate file n1 '.PJ' into dsn.
      ENDIF.
      if p_werks = 'CQ01'.
        concatenate file1 n1 '.PJ' into dsn.
      ENDIF.
      open dataset dsn for output in text mode encoding default.
      if sy-subrc <> 0.
        exit.
      endif.
    endif.
*ENDLOOP.
enddo.
close dataset dsn.
ENDFORM.                    " write_data1
hope this shelps u
regards,
Arun prasad

Re-print Pick list

hi -
I had a Pick List printed. But the document got accidently destroyed before the Picking could take place.
I used VL02n and under output for Picking, i tried to run the Output again, but the area is greayed out and i am unable to put the condition type EK00 to re-print the pick list.
Is there any other way in Standard SAP to reprint the Pick list.
Any suggestions or recommendations !!!

Hi,
*If you have configured LL01 report in your system* you can take print out of pick list for the inconfirmed transfer orders. In report you have to set up layout to take bin details.
Hope this meet your requirment.
Regards,
Prashant

Problem in generation of Picking list

Hi friends,
The scenario: Picking list is printed as soon as the delivery is saved. The program and layout are working fine.
Example: let a delivery is being saved with reference to a sales order with only one line item ( for simplicity), and let the quantity to be delivered that is delivery quantity (LIPSD-G_LFIMG, on screen) be 2, now there are three cases:
1. before saving the delivery if NO Picking quantity (LIPSD-PIKMG, on screen) is entered, The picking list is printed, here the field VBUP-KOSTA (picking status field) is having value 'A', and field VBUK-KOSTK(Overall Picking status)is also having value 'A', and the picking list is printed.
2. before saving the delivery if Picking quantity (LIPSD-PIKMG, on screen) is entered as 1, the field VBUP-KOSTA (picking status field) is having value 'B', and field VBUK-KOSTK( Overall Picking status) is also having value 'B', and the picking list is printed.
3. before saving the delivery if Picking quantity (LIPSD-PIKMG, on screen) is entered as 2, the field VBUP-KOSTA (picking status field) is having value 'C', and field VBUK-KOSTK( Overall Picking status) is also having value 'C', and the picking list is NOT printed.
I think the check is only done on VBUK-KOSTK for the picking list print, as in case 3, i changed the value of VBUK-KOSTK back to 'A' by using the user exit USEREXIT_SET_STATUS_VBUK in include LV45P079 as a result of which the picking list was printed, but it also stored the VBUK-KOSTK value as 'A' in the database table which is undesirable, as it should be saved with its earlier value, before it was explicitly made 'A'.
So, my requirement is to Print the picking list, even if the delivery quantity and picking quantity is same for any number of line items.
How can i solve this problem?? Speedy help requested.
thanks,
Sharon.

Hi Sharon,
Looks like you need this pick list no matter what the status of the document is and what the picking relevancy is. Why don't you create an output type that is assigned to the document all the time and then create this form as it is. If you are trying to use the standard output type and standard form and standard routine, then system is going to behave the standard way, that is to create a pick list when it is relevant for picking and only if the status is not complete. The system logic is that a pick list is supposed to tell your warehouse as to what needs to be picked and if there is nothing to be picked or if the item not relevant for the picking then it doesn't need to be there on this list.
So if you want a list similar to the pick list, have the logic replicated minus the pre-conditions about picking status etc, have the form copied and then create and assign it to a new output type.
Regards,
Srinivas

System variable for Warehouse name in Pick list PLD

Hi Experts,
My customer would like to show the Warehouse name on the Pick List print layout.
What is the System Variable to display the Warehouse name on the Pick List?. Iu2019m working with Sap Business One 2007A.. Where can I find the system variables for Chile localization. Thanks Very Much
Claudia

Hi Claudio,
Try this,
->> Open the Pick List(System) PLD and Save as the New PLD.
->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
Table -> OWHS - WareHouse
Column -> WhsName - WareHouse Name
Save as and Run the Print Preview.
IF will not print the WareHouse Name in Print.
Do this in PLD.
->> Open your PLD.
--> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
Regards,
Madhan.

Pick List with WM

Is it possible to have the pick list print (EK00) automatically even if the delivery is relevant for warehouse management? The users would rather use this output than the transfer order document via WMTA.
Thanks,
Ron

Hi Ron,
I think with a small modification to the driver program of EK00 output type; you can get this output printed automatically in background even for a warehouse managed materials.
Driver program: RVADEK01 can be copied into ZRVADEK01 and modify this to accommodate the requirement.
I dont think EK00 alone can be used to print for warehouse materials in delivery.
Hope this helps!
Regards,
Syed Nasir

Picking list determination

hi, we're using WM which needs to print picking list for picking(TO), i would like to know how the picking list is determined, i mean the logic setup for picking list, where is the path for config in the system.
i knew that if we are using by Tcode to print picking list that doesn't need output type? otherwise we have to setup the output type for picking list printing. is that true! what is the relationship between Tcode printing and output type? could someone explain to me. thanks
Edited by: qgjddcel on Sep 5, 2008 4:36 PM
Edited by: qgjddcel on Sep 5, 2008 4:45 PM

Use transaction code NACE for using the o/p determination
Then select V2 for shipping as you are creating o/p for delivery
Create table, maintain access sequence, maintain output type and assign o/p to procedure. Then create the master record in VV21. In o/p you have std functionality to use EDI, email, Print, Fax, ALE
if you are having problem using NACE transaction, use this flow:
SPRO>Logistics Execution>Shipping>Basic Functions>Output Control>Outpur determination>maintain o/p determination for outbound deliveries.
reward points if helpful
Message was edited by:
Comes Naturally

How to preview pick list ?

Hi all ,
i want to preview the pick list , Because the picking document should be printed at the moment of release , the transaction code should be COR2. but i still cannot get the pick list layout , anyone know the test scenario of getting the pick list layout when release a process order?
best regards
Kevin

Hi Kevin,
plz go through d given below link
how to see the print preview of production order
pick list print preview
May u got d solution.
regards,
Archana

Pick List Will Not Print On Add with SAP B1 2007A

There appears to be a bug with printing pick lists on Add with SAP B1 2007A. I have replicated the problem with PL03, 06 and 08.
Pick lists will print manually, but if you have them setup to print on add (Administration->System Initialization->Print Preferences), the following error in the log will appear:
Error Default report not found for current report type; set a default report and try again C:\Program Files\SAP\SAP Business One\SAP Business One.exe PID=6104 TID=1672
I ran a SQL trace and found the problem. The default Pick List report is set and set correctly in tables RTYP and RDOC. The problem is that SAP is looking for a RTYP.CODE value of PKL1 (instead of RLR2). PKL1 does not exist as a code in either 2005 or 2007. The Pick List document ID is RLR20001.
To confirm this on my demo database, I updated RTYP and set the CODE of RLR2 to PKL1. Afterwards, when adding a Pick List, it printed without any errors. I suppose another temporary fix would be to add a new record to the RTYP tabe with a CODE of PKL1 and the default pick list report document ID.

After many hours of inquiring, searching and digging... There is an obscur SAP Note that says clearly, NOT SUPPORTED.
Best thing I could do, was to keep a server with the same configuration ready to connect to my SAN and take over from the dead server.
So for anyone interested in this topic. Save you time, search the SAP Notes for Support and high availability.
Hope that helps others.

Error printing pick list from IW32

Hi all,
When trying to print pick list from transaction IW32, I get this error message:
Express document "Update was terminated" received from author ...
When I checked out this error message in SM13, I found this:
Transaction code: IW32
Module name (function): PM_ORDER_PRINT_CONTROL
Status: Update was terminated
Raise exception: KEY_NOT_FULLY_SPECIFIED (Complete key not entered)
The shop paper (pick list) is customer defined (Z*) under application area O (Maintenance orders). This shop paper is set up to print to a certain printer, P1, and printing other PLM documents on this output device works fine.
Does anyone have an idea what can be causing this error?
All helpful answers will be rewarded.
Best regards,
MV

Hi,
I have tried to print the pick list several times, in development, test, and production systems. It fails with the same error each time.
Do you have any ideas why this error occurs, is there any special IMG activity or PLM configuration that I could check to see if some printer settings are wrong?
Regards,
MV

Printing problem for picking list

Hi friends,
Whenever we print the picking list of material with batch number. the printing job will bring a extra page with basic form information . it's kind of wasting the paper since the extra page doen not contain any specific picking informations. This issue only happen to picking list with batch number applied material . The extra page won't be printed out once the material is not subjected to batch management.The form style should be script form.
Please kindly advise if you have any suggestions.
Thanks,
LG

Hi,
Assuming printing job is batch job. Normally batch job executes a program (you assign program to the batch job when you configure it) while you create batch jobwhile it is running. If you want the system to check the particular information (take the information if the so and so prerequisits matches if not ignore kind of) during the program execution you can do it with the hlep of a deverloper.
If you want to avoid unnecessary basic ifnormation it can very well be done with the layout changes in SAP script form and the program if necessary. Make sure you dont need those information as some times it is like a legal information like we see in the company signatures which seems like basic information.

Pick list printing

Similar Messages

Maybe you are looking for