Pick&Pack consistency check

Hi Gurus,
When executing the Pick and Pack process, is there anyway to ensure to consistence between what decided in the picking request/confirmation and what actually packed?
I.e. if the pick&pack requested 10 products A to be put in 2 boxes type B, does SAP chek that packing was done for the correct products and packing material?
thanks
michele

Hello Michele,
Yes, based on packing instruction the system will check the consistancy. Also there is functionality that certain packing materials are allowed to pack certain items only.
Regards,

Similar Messages

CRM 5.0 ATP check to ECC not including pick / pack time in ECC 6.0

Been searching SDN & OSS, our ATP check in 5.0 is reading the proper inventory in ECC but when no inventory is available the date being returned is the total replenishment leadtime in the ECC material master. (good)
When the order is entered in ECC if no stock exist, the total replenishment leadtime become the material availability date in the ECC schedule line, we have 2 days pick / pack time in the shipping point so the confirmed date is 2 factory days after the material availibility date.
Therefore in CRM the ATP date in CRM looks to be 2 days earlier than desired or what ECC provides. I also set up the vendor partner in CRM but that did not help.
Anyone have experience with this one?
One similiar topic, if total replenshiment leadtime is 3 days and saturday & sunday are not workdays. a CRM order placed on saturday gives wednesday (monday, tuesday, wednesday) as the date. ECC gives thursday (tuesday, wednesday, thursday)

I had 2 issues
- I didn't have the X set in SMOFPARSFA so i was doing availibility information which doesn't include scheduling (pick pack)
- other issue was timezones which required note 1423767

RME 4.3.1 device update failing 'WARNING : Cat3560(7.3):Consistency check failed for base package SharedNetshowIOS'

Hi Guys,
I'm having some issues updating the device packages for my RME 4.3.1 install.
I've downloaded and tried to update the 'Cat3560.zip' package via the GUI, but the job fails with the above error.
I pulled up the PSU.log and found the following:
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : _CURCMVER=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : CMVERSION=5.2.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [CMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for CM already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : _CURDFMVER=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : CMF Package Map Available.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : DFMVERSION=3.2.0
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [DFMPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for CVW already loaded.
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : isExistsVersionFile=true
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : VERSION=4.3
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : PATCHVER=1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : _CURRMEVER=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : getProperty] : Mdf=1.41:MDF Package
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : RMEVERSION=4.3.1
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [RMEPSUAdapter : <clinit>] : MDFVERSION=1.41
[ Thu May 27 10:11:49 PDT 2010 ] INFO   [PackageManager : initAdapters] : Adapter for RME already loaded.
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages] : Locking package repository..
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve] : Checking Dependencies...
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : pickUnselectedBasePackages] : SharedSwim2900XL has 17 dependent packages
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageParserAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedDcmaIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[DistributionAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibSwim] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibSwim
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimJobOptionsAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SoftwareAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ConfigAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[LibCommon] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package LibCommon
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SystemAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ImageListAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[ContainmentAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[FlashAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[MemoryAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[RemoteStageAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Dependent package[SwimCCOAG] already installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PsuPkgResolver : isConsistentBaseAbsent] : Lower version of dependent package[SharedSwimIOS] installed
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : pickUnselectedBasePackages] : Consistency check failed for base package SharedSwimIOS
[ Thu May 27 10:11:50 PDT 2010 ] WARN   [PsuPkgResolver : pickLatest] : No packages to pick ..Empty package set passed .
[ Thu May 27 10:11:50 PDT 2010 ] ERROR [PsuPkgResolver : populateResolverResult] : All selected packages failed consistency check..
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo] : Progress: WARNING: SharedSwim2900XL(2.2.3): Consistency check failed for base package SharedDcmaIOS
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageInstaller : installStep_resolve] : Packages selected for install (satisfies consistency check) : []
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [SimpleProgress : progressInfo] : Progress: No packages to be installed
[ Thu May 27 10:11:50 PDT 2010 ] INFO   [PackageManager : installPackages] : Creating maps in D:\CSCOpx\www\classpath\com\cisco\nm\xms\psu\pkgs\rme
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.11.2.3.7.5.19 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:17 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : * not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:12:31 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.9.1.99999999 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6010 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6020 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6030 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7101 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.8110 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6040 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7102 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7201 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6050 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7103 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7301 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6060 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7203 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7401 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7501 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7303 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7213 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.6070 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7502 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7223 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7503 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:42 PDT 2010 ] WARN   [CreateMaps : createPackageMaps] : oid : 1.3.6.1.4.1.141.1.1.7504 not found in D:\CSCOpx\lib\classpath\com\cisco\nm\cwcs\mdf\mdfdata.xml . Hence it will not be added to the device map.
[ Thu May 27 10:13:44 PDT 2010 ] INFO   [PackageManager : installPackages] : Releasing lock...
[ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init] : Loading history db fromD:\CSCOpx\lib\classpath\com\cisco\nm\xms\psu\conf\historyDB
[ Thu May 27 10:13:44 PDT 2010 ] INFO   [DeviceSupportHistory : init] : Number of Events Loaded in init()6
Before i started to bug TAC, I figured I'd post this here.
Let me know your thoughts

Looks like your package repository has been corrupted. TAC can provide a procedure to recover from this corruption. The following DOC indicates why this can happen and has suggestions on how to avoid these problems from re-occuring.

Pick/pack time and loading time in route

HI People,
If I make entry in the shipping point that loading time and pick/pack time as route dependent then where do I enter these times in route as I didn't find any feild to enter these in routes.

You can control scheduling by sales doc type & shipping point. Logical path - Logistic Execution-shipping-basic shipping function -scheduling-delivery scheduling & Transportation sch.
Trasportation planning will determine below mentioned fields.
Check-in
Loading start
Loading end
Shpmt completion
Shipment start
Shipment end.
Picking, packing will be controlled by delivery scheduling
give me ur email id will forward u the document for it
Regards,
Krishna O

Using BI Publisher for printing pick, pack slips, invoices and statements

We are trying to determine if we can use BI Publisher to print, fax, email, archive our primary business documents (pick, pack slips, invoices, AP checks, statements. In the past we used a 3rd party document generation product because the JD Edwards forms software delivered with EnterpriseOne did not have the functionality we needed to automate the presentation and delivery of the documents without modification to the JDE software. We need to automatically sort and split the Spool and or XML files and determine the delivery methods for the output dynamically using the data in the output file, merge with the correct form template(s) and send it to the correct printer(s), fax, email, portal. We also have 3 printers in the mail room for statements less than 8 pages, 8 to 15 pages and 16+ pages. The number of pages produced has to be sorted before it is sent to the printer because of the envelop inserter attached to the printers. Can this be done with the free version of BI Publisher? If not what does the paid version of BI Publisher cost? Does the paid version provide this functionality?

Hi user953712,
1. Check format should use fixed row enumeration matched to the number of remittance lines per stub setup on the Payment Document in EBS.
2. "not using word columns"? I'd be using a table in Word. Is this a text based format? If so consider ETEXT.
"should go into a different file"? Sounds like bursting or some other mechanism.
Regards,
Gareth

Transportation lead,pick/pack & Transit time

Dear Friends,
After considering transpoartation lead time,pick/pack time,loading time & transit time system do confirm whether stock is available or not.....my doubt is whr do we maintain the above said times in the system?........

Hi saravanakumar
Transit time and Transportation lead time is taken from or maintained in Route
Loading time and pick/pack time comes from shipping point
You need to have clarity on backward scheduling and forward scheduling
For example you are creating a sales order today 15.02.2009 and the requested delivery date is 25.02.2009 from the customer side
Transit time is 2 Days
Transportaion planning time is 2 days
Loading time is 1 day
Pick/pack time is 1 day
Consider these settings
Now backward calculation System does a backward calculation first
25.02.2009 (requested delivery date) -- 2 days (transit days) -- 1 day (loading time) -- 2 days (transportation planning time) = that is on 20.02.2009 there should be enough stocks in the unrestricted stocks and system checks stocks for this day or date ,that is 20.02.2009 ,whether the stock is available enough
This date 20.02.2009 becomes the material available date
Note Transportaion planning time and Pick/pack time will run parallely and the higest of these two is considered for delivery scheduling so in our case Transportaion planning time is 2 days that is the highest and hence it is taken for calculation and not pick /pack time
If the system finds enough stocks on 20.02.2009 (that means it performs a availability check for 20.02.2009 depending on OVZ9 settings) that is material available date then it confirms schedule lines for that order this is backward
Same example order is registered today 15.02.2009 and if the customer wants stocks on 17.02.2009
This means 17.02.2009-2 days (transit days)-1 day(loading time)-2 days (transportation planning time) = 12.02.2009
The order registered date is 15.02.2009and the material availablity date is past 12.02.2009 or material available date goes to past.
This is illogical
This means backward is failing here and now forward calculation takes place
Forward calculation
If you have enough stocks today 15.02.2009 + 2 days transportation planning time+ 1 day loading time+2 days transit time = 20.02.2009
This means that is on 20.02.2009 the stocks can be confirmed for this order as against a requested delivery date of 17.02.2009
In forward the system will give 2 schedule lines first that is requested delivery date that is 17.02.2009(in our case) with ZERO qty and the second date as 20.02.2009 with full qty
In backward you will find only one date in the schedule lines which is the same as requeted delivery date that is 25.02.2009 in our case
Hope i made things little bit clear to you
Transit and transporatation planning will come from route if route is maintained otherewise it is taken as 0 days
Loading and pick pack time will be maintained in shipping pt if not maintained also then it is taken as 0 days (in enterprise structure logistice execution and your shipping point details it is maintained)
Regards
Raja

Transportation/pick pack dates

Our pick pack time and transportation planning dates changed on the sales order.
For some reason the deliveries are now goods issuing on the same day as the material availability date.
Where is the pick pack date,loading date or Tp date set?
What config do I need to check?
Edited by: saad A on Apr 23, 2009 9:16 PM

Hi,
You can search the forum, where you can find enough responses on this topic;
For example, check the link
[Transportation lead,pick/pack & Transit time|Re: Transportation lead,pick/pack & Transit time]
Regards,

Link Sales Order and PO and Pick & Pack

Ability to add a manual Link between a Sales Order and Purchase order to reserve the item(s).
Also do not allow Pick & Pack manager to create pick list for sales orders with an earlier date if other sales orders exists waiting for complete shipment.

HI,
WE can use the table VBKD (SALES DOCUMENT: BUSINESS DATA )
1. VBELN - Sales order
2. BSTKD - Customer Purchase order
we can link these two fields and can pass the data in a internal table after that Vbeln is also present in
Tables VBAP ( SALE DOCUMENT ITEM DATA )
1. VBELN - SALE ORDER
2. MATNR - MATERIAL NUMBER
3. KWMENG - ORDER QUANTITY
which could be used for further procssing
Thanks
Rajat

Stock Report to Include Released Quantities in Pick & Pack Manager

Hi,
I have the following Stock Report that has been written to include various other information I need to look at regularly, but I am looking to include what quantity per stock code is released in Pick & Pack Manager.
Is anyone able to help me on this, it would be appreciated?
Kind Regards
David
SELECT     T0.ItemCode, T0.ItemName, T0.SalPackMsr as 'Pack Size', T0.SWW as 'Size', T0.OnHand, T0.OnOrder,T0.IsCommited,
(SELECT     SUM(T1.Quantity)
FROM         QUT1 T1 INNER JOIN
                      OQUT T2 ON T1.DocEntry = T2.DocEntry
GROUP BY T1.ItemCode, T2.DocStatus
HAVING      (T2.DocStatus = 'O') AND T1.itemcode = T0.itemcode) as QuoteQty,
T0.[OnHand]-T0.[IsCommited]+T0.[OnOrder]- isnull((SELECT     SUM(T1.Quantity)
FROM         QUT1 T1 INNER JOIN
                      OQUT T2 ON T1.DocEntry = T2.DocEntry
GROUP BY T1.ItemCode, T2.DocStatus
HAVING      (T2.DocStatus = 'O') AND T1.itemcode = T0.itemcode),0) as Available,
(SELECT     SUM(T3.Quantity) AS SoldQuantity
FROM         OINV T4 INNER JOIN
                      INV1 T3 ON T4.DocEntry = T3.DocEntry
WHERE     (T4.DocDate >= CONVERT(DATETIME, '2011-01-01 00:00:00', 102))
GROUP BY T3.ItemCode
HAVING      (SUM(T3.Quantity) > 1) and (T3.ItemCode = T0.ItemCode))as QuantitySold,
(SELECT     SUM(T5.Quantity) AS CreditedQuantity
FROM         ORIN T6 INNER JOIN
                      RIN1 T5 ON T6.DocEntry = T5.DocEntry
WHERE     (T6.DocDate >= CONVERT(DATETIME, '2011-01-01 00:00:00', 102))
GROUP BY T5.ItemCode
HAVING      (SUM(T5.Quantity) > 1) and (T5.ItemCode = T0.ItemCode))as QuantityReturned
FROM         OITM T0
WHERE T0.[OnHand]T0.[IsCommited]T0.[OnOrder] + isnull((SELECT     SUM(T1.Quantity)
FROM         QUT1 T1 INNER JOIN
                      OQUT T2 ON T1.DocEntry = T2.DocEntry
GROUP BY T1.ItemCode, T2.DocStatus
HAVING      (T2.DocStatus = 'O') AND T1.itemcode = T0.itemcode),0) <> 0

Dear Ashish,
If your Pick List status is open, it will not lock anything. You need release them.
Thanks,
Gordon

The time characteristic consistency check has produced an error DBMAN 62

Hi
We are getting an error while updating to one target as The time characteristic consistency check has produced an error""
* Checked the respective PSA data field which is fine. Dates are in correct format.
* RSRV ran for the particular target. It had error but the jobs were successful till yesterday.
* Data from 01.05.2014 is having the problem ( Which I got from the record number in PSA )
NB: We are running on HANA database but the respective target is not yet HANA Optimised
Details Figures Attached
Any Idea.. What could have gone wrong
Regards
Reshoi R

Hi
Record Number 2995 is shown in the figures attached.
I have already carried out the deletion and automatic repair mentioned in RSCV061 even before posting this question but of no use ( I have shown that also in the figures attached at the posting time.
Reporting is fine. The problem is while loading the data to the cube. The loading is fine till date 30.04.2014 but from the date 01.05.2014. The record is error while updating.
The cube is partitioned from month 01.2008 to 12.2015.
Regards
Reshoi R

Error during currency conversion and consistency check in a sales order

Hi Experts,
I am facing the below error in the sales order. The sales order is having so many items. The below error is coming for few items only. I have checked the currency exchange rates also. All are maintained properly.
Please advice me how to fix this error or which class,methods are responsible for checking the above details while saving the order.
Thanks,
Sri

Hi Christophe,
FYI
Error during currency conversion frm &1 to &2 (date &3, ref. curr. &4)
Message Class - CRM_CUMULATED_I
Message No     - 013
Error during currency conversion for &1 and &2
Message Class - CRM_CUMULATED_I
Message No     - 008
Consistency check: Logical key does not match
Message Class - CRM_CUMULATED_I
Message No     - 011
Thanks,
Sri

Bapi for Picking, Packing and Post goods issue (WS_DELIVERY_UPDATE)

Hi,
I have a requirement to update the outbound delivery. In that, I need to update the picking, Packing details and have to complete the PGI for the particular delivery. I got the suitable function module for the same is : WS_DELIVERY_UPDATE.
Can anyone tell me what parameters should I need to pass to perform my above requirements.
Thanks in advance.
Regards
Ramesh mavilla.

I can Update picking and PGI using the above BAPI. But I am unable to create the Handling Units properly with the above mentioned BAPI befor PGI. Can any one help me ASAP.
Thanks
Ramesh mavilla.

Windows Server 2012 - Backup failing with Exchange - The application will not be available for recovery from this backup. the consistency check failed

Hi
We have a Windows 2012 server with Exchange 2013, all is working fine except now i am getting issues with the backup.
'Exchange - The application will not be available for recovery from this backup. the consistency check failed for the component Microsoft Exchange Server'
I have checked the database all is fine, i have created a new db and move all mailbox;s over and then removed the old db, i have enabled circular logging and then disabled it, it seems no matter what i do i cannot get a full backup!
i did have to restore the server once and the backups still worked for about 4 days after that and then stopped, i have also tried to remove and re add the backup role!
i am stumped, any advice would be great!

Hi
Ok, i created a test db and tried to back it up right away, it failed, i did not add any mailbox's to it either. i got quite a few events in the windows logs, as well as the same event above i got the following:
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database 4843b37c-7b3c-42b2-8b57-1393615c2c15.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261645</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>4843b37c-7b3c-42b2-8b57-1393615c2c15</Data>
</EventData>
</Event>
AND
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2038
Task Category: Exchange VSS Writer
Level: Warning
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Microsoft Exchange VSS Writer backup failed. No log files were truncated. Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9. Database db5826f3-1029-4219-ad80-441a0e94537a.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="32772">2038</EventID>
<Level>3</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261646</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>db5826f3-1029-4219-ad80-441a0e94537a</Data>
</EventData>
</Event>
and
Log Name: Application
Source: MSExchangeRepl
Date: 21/01/2013 10:16:30
Event ID: 2034
Task Category: Exchange VSS Writer
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
The Microsoft Exchange Replication service VSS Writer (Instance 75754d0d-8dfe-4909-8beb-5a4f824254a9) failed with error FFFFFFFC when processing the backup completion event.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchangeRepl" />
<EventID Qualifiers="49156">2034</EventID>
<Level>2</Level>
<Task>2</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261649</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>75754d0d-8dfe-4909-8beb-5a4f824254a9</Data>
<Data>FFFFFFFC</Data>
</EventData>
</Event>
and
Log Name: Application
Source: SPP
Date: 21/01/2013 10:16:30
Event ID: 16389
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: NERDS-DC01.nerds.local
Description:
Writer Microsoft Exchange Writer experienced retryable error during shadow copy creation. Retrying... More info: .
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SPP" />
<EventID Qualifiers="0">16389</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2013-01-21T10:16:30.000000000Z" />
<EventRecordID>261650</EventRecordID>
<Channel>Application</Channel>
<Computer>NERDS-DC01.nerds.local</Computer>
<Security />
</System>
<EventData>
<Data>Microsoft Exchange Writer</Data>
<Data>
</Data>
<Data>The writer experienced a transient error. If the backup process is retried, the error may not reoccur. (0x800423F3)</Data>
<Data>
</Data>
<Binary>00000000A5120000981200000000000042BEB7C511CAC619E59C92030000000000000000</Binary>
</EventData>
</Event>

Consistency check error in sender file content conversion

Dear Experts,
I am trying one simple File to File scenario in which i have only fields 1>salesorder_number 2>Description
I created a txt file with line items "100,crudeoil" with file name as salesorder.txt
In the sender file adapter i have configured the file convertion paramenters as follows:
Document name : mt_salesorder_sender
Document namespace : http://se.com.sa/sec-sa-qax "Namespace of message type
Recordset Structure : document,*
document.endSeparator : 'nl'
document.fieldSeparator: ,
document.fieldNames : salesorder_number,Description
So after this if i run the scenario In file adapter i am getting the error like "Conversion initialization failed: java.lang.Exception: java.lang.Exception: java.lang.Exception: Error(s) in XML conversion parameters found: Parameter 'document.fieldFixedLengths' or 'document.fieldSeparator' is missing Consistency check: no. of arguments in 'document.fieldFixedLength' does not match 'document.fieldNames' (0 <> 2) "
Please let me know where i am going wrong.
Regards,
Santhosh

Hi,
please maintain the order as
Recordset Structure : document,*
document.fieldNames : salesorder_number,Description
document.fieldSeparator: ,
document.endSeparator : 'nl'
Rgds
joel

Getting error in DB02 after checking Consistency check Unknown objects in A

Dear All,
I have getting error in DB02 after checking Consistency check.
Please find the details.
I have queries.
How to correct the Unknown objects in ABAP Dictionary and Optional index is also we have to create please suggest step by step process.
Missing in R/3 DDIC      1              11
Consistency check of 07.04.2009 10:14:24
-- Objects missing in the database
Primary indexes                  0
Secondary indexes                0
Tables                           0
Views                            0
-- Unknown objects in ABAP Dictionary
|   |-- DB tables                        1
      |-- DB indexes                      11
     |-- DB views                        12
-- DB tables without unique index   1
-- Optional indexes
Too many indexes created         0
-- Indexes not created            145
Regards,

Hi
Check this may help you
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/e4ff3e65b66976e10000000a1553f6/content.htm
Regards
Uday

Pick&Pack consistency check

Similar Messages

Maybe you are looking for