Pick Pack Pass Removing HU
Dear Experts,
I need your kindly support. When implementing pick pack pass function, if I were to remove two handling unit from two different Activity Area, the HU got picked first will not enter the pick-HU and will remain on resource. However, if I pick two products(instead of HU), the problem will not occur.
If Picking two HU 612/613 into 90031(pick-HU)
612(the one got picked first) remain on resource and did not go to destination bin
If Picking two products (Y003/YEWMZ) into 90023(pick-HU)
Both products go to destination bin
Please kindly give me advise as what might be the problem.
Best and Thanks,
Eddie
This issue has been resolved by SAP's note 1998445"
"You work on RFUI with picking logical transaction. In your process several resources are using the same pick HU. The first resource moves a HU to the pick HU creating a nested HU. When the second resource picks up the pick HU, the HU hierarchy is deleted. All HUs are moved directly to the resource."
Similar Messages
-
Link Sales Order and PO and Pick & Pack
Ability to add a manual Link between a Sales Order and Purchase order to reserve the item(s).
Also do not allow Pick & Pack manager to create pick list for sales orders with an earlier date if other sales orders exists waiting for complete shipment.HI,
WE can use the table VBKD (SALES DOCUMENT: BUSINESS DATA )
1. VBELN - Sales order
2. BSTKD - Customer Purchase order
we can link these two fields and can pass the data in a internal table after that Vbeln is also present in
Tables VBAP ( SALE DOCUMENT ITEM DATA )
1. VBELN - SALE ORDER
2. MATNR - MATERIAL NUMBER
3. KWMENG - ORDER QUANTITY
which could be used for further procssing
Thanks
Rajat -
Bapi for Picking, Packing and Post goods issue (WS_DELIVERY_UPDATE)
Hi,
I have a requirement to update the outbound delivery. In that, I need to update the picking, Packing details and have to complete the PGI for the particular delivery. I got the suitable function module for the same is : WS_DELIVERY_UPDATE.
Can anyone tell me what parameters should I need to pass to perform my above requirements.
Thanks in advance.
Regards
Ramesh mavilla.I can Update picking and PGI using the above BAPI. But I am unable to create the Handling Units properly with the above mentioned BAPI befor PGI. Can any one help me ASAP.
Thanks
Ramesh mavilla. -
Using WHSCON to Pick Pack and PGI
Hi,
I need to do Pick pack and PGI with inbound WHSCON idoc in WM non relevant delivery. Can anybody please suggest me what are all the necessary fields do I need to pass to achieve the same.
Thanks,
Neha.Hi,
We have the same requirement as you have. We need an inbound IDOC to pick / pack and PGI and customer delivery. We are working with message type WHSCON.
We initially created the delivery without any batches assigned to it. The IDOC coming in will have the batch details on it. We would like an IDOC to create these lines (batch split lines)
Is it possible to do this?
Regards,
Finbarr -
Stock Report to Include Released Quantities in Pick & Pack Manager
Hi,
I have the following Stock Report that has been written to include various other information I need to look at regularly, but I am looking to include what quantity per stock code is released in Pick & Pack Manager.
Is anyone able to help me on this, it would be appreciated?
Kind Regards
David
SELECT T0.ItemCode, T0.ItemName, T0.SalPackMsr as 'Pack Size', T0.SWW as 'Size', T0.OnHand, T0.OnOrder,T0.IsCommited,
(SELECT SUM(T1.Quantity)
FROM QUT1 T1 INNER JOIN
OQUT T2 ON T1.DocEntry = T2.DocEntry
GROUP BY T1.ItemCode, T2.DocStatus
HAVING (T2.DocStatus = 'O') AND T1.itemcode = T0.itemcode) as QuoteQty,
T0.[OnHand]-T0.[IsCommited]+T0.[OnOrder]- isnull((SELECT SUM(T1.Quantity)
FROM QUT1 T1 INNER JOIN
OQUT T2 ON T1.DocEntry = T2.DocEntry
GROUP BY T1.ItemCode, T2.DocStatus
HAVING (T2.DocStatus = 'O') AND T1.itemcode = T0.itemcode),0) as Available,
(SELECT SUM(T3.Quantity) AS SoldQuantity
FROM OINV T4 INNER JOIN
INV1 T3 ON T4.DocEntry = T3.DocEntry
WHERE (T4.DocDate >= CONVERT(DATETIME, '2011-01-01 00:00:00', 102))
GROUP BY T3.ItemCode
HAVING (SUM(T3.Quantity) > 1) and (T3.ItemCode = T0.ItemCode))as QuantitySold,
(SELECT SUM(T5.Quantity) AS CreditedQuantity
FROM ORIN T6 INNER JOIN
RIN1 T5 ON T6.DocEntry = T5.DocEntry
WHERE (T6.DocDate >= CONVERT(DATETIME, '2011-01-01 00:00:00', 102))
GROUP BY T5.ItemCode
HAVING (SUM(T5.Quantity) > 1) and (T5.ItemCode = T0.ItemCode))as QuantityReturned
FROM OITM T0
WHERE T0.[OnHand]T0.[IsCommited]T0.[OnOrder] + isnull((SELECT SUM(T1.Quantity)
FROM QUT1 T1 INNER JOIN
OQUT T2 ON T1.DocEntry = T2.DocEntry
GROUP BY T1.ItemCode, T2.DocStatus
HAVING (T2.DocStatus = 'O') AND T1.itemcode = T0.itemcode),0) <> 0Dear Ashish,
If your Pick List status is open, it will not lock anything. You need release them.
Thanks,
Gordon -
CRM 5.0 ATP check to ECC not including pick / pack time in ECC 6.0
Been searching SDN & OSS, our ATP check in 5.0 is reading the proper inventory in ECC but when no inventory is available the date being returned is the total replenishment leadtime in the ECC material master. (good)
When the order is entered in ECC if no stock exist, the total replenishment leadtime become the material availability date in the ECC schedule line, we have 2 days pick / pack time in the shipping point so the confirmed date is 2 factory days after the material availibility date.
Therefore in CRM the ATP date in CRM looks to be 2 days earlier than desired or what ECC provides. I also set up the vendor partner in CRM but that did not help.
Anyone have experience with this one?
One similiar topic, if total replenshiment leadtime is 3 days and saturday & sunday are not workdays. a CRM order placed on saturday gives wednesday (monday, tuesday, wednesday) as the date. ECC gives thursday (tuesday, wednesday, thursday)I had 2 issues
- I didn't have the X set in SMOFPARSFA so i was doing availibility information which doesn't include scheduling (pick pack)
- other issue was timezones which required note 1423767 -
Pick Pack time in shipping point.
Hi Gurus,
I would like to have a clear understanding on the Pick Pack time / Loading time in Shipping point Configuration.
1. I have configured shipping point with factory calendar assigned to it.
2. I have given the pick pack time in the shipping point config.
Now the question is, i'm able to give fraction values also here , say 2.5 days for pick pack time,.
what does this mean? how do i infer.
Please provide clarity.
I do not want details on how the dates are determined in Sale order w.r.t to this details, instead more clarity on how days will be taken if fractional values are given in days and not in hours.
Regards,
Basha.System will consider decimal based on factory calender and work times fields
If work times are defined, lead times can be set in hours/minutes and applied to the work times.
The following priorities are used for scheduling:
Factory calendar and work times maintained
The lead times are used in hours / minutes work time. Here, both the work days defined in the calendar as well as the work times on the individual weekdays (Monday through Sunday) are taken into consideration.
Additionally maintained lead times in calendar days are possibly not taken into consideration if the lead times are not maintained in hours/minutes. The work time would then be zero from the schedulung view.
Factory calendar maintained
The work times in calendar days are used and the workdays defined in the calendar are included. From the scheduling view, each day has 24 hours (in contrast to the lead time in hours/minutes where the work times are taken into consideration).
Additionally maintained lead times in hours/minutes are possibly not taken into consideration if the lead times in calendar days are not maintained. The work time would then be zero from the scheduling view.
No factory calendar maintained
As above, the system calculates only using calendar days, and work-free days, such as weekends or public holidays, are not taken into consideration
Thanks
Chidambaram -
Hi,
I've looked through various questions on Pick and Pack in the forum and have gotten some idea how it works. However, I would like more details on the feature and there seems to be a document in servers that requires a login userid and password. One link is to https://websmp109.sap-ag.de/form/sapnet?... and an outdated link is https://websmp201.sap-ag.de/sapdownload/011000358700004837192004E/Pick_Pack_2004A.pdf
I don't have access to that server. Is anyone able to provide me with the document?
Thank you.Hi,
Some documents on the portal are only for partner use. If you are a customer, you may go to Customer Portal to find the document. As Rahul pointed out, Pick & Pack is really a simple function. You may play them in test environment and get an idea easily.
Thanks,
Gordon -
Hello Everyone,
I know that Pick and pack times are using the Shipping point working times or calendar.
Just to confirm, can I say that Pick / pack time cannot be derived from the Route?
regards
JohnThis is really depends on what value you set in the field Determine Pick/Pack time in the shipping point definition. If value A is selected then the pick/pack time becomes route dependant.
By definition the pick/pack time is the time in days that is required for allocating goods to a delivery as well as the time in days that is required for picking and packing. It is calculated using the shipping point, the route, and the weight group of the order item. (from help.sap.com at http://help.sap.com/saphelp_47x200/helpdata/en/dd/5607e7545a11d1a7020000e829fd11/frameset.htm). So the route can impact the pick/pack time.
Regards, -
Delivery PICK Pack PGI by shipment through SAP WM RF Please help me
Hello gurus,
I want to use standard SAP funtion to do the following funtion in RF gun as folllows
Delivery >>> PICK >> PACK >>> PGI by shipment -
> whole this step should be done in LM46. Please let me know anyone has Idea or solution
Edited by: happytaj on Aug 10, 2010 12:13 AM
Edited by: happytaj on Aug 10, 2010 12:14 AMYou should talk to various institute.
-
List of route, pick/pack, loading, Transit
Hi,
I have shipping point eg.abc .Let me know How to get list of route, pick/pack, loading, Transit time from mention shipping point,,means which table or any other way?/
ThanksHi,
You can get from LIKP
Cheers -
Need help on IDoc for Picking, Packing and PGI against the Sale order
Hi All,
I am new to this IDoc stuffs. Below is the scenario for which I would like to know the details of the IDoc...
Business Case:
1. Storage location is a HU Managed but not WM managed.
2. This storage locations is managed by a third party
3. Outbound delivery document against the SO will be created by our personnels in SAP for this storage location.
4. Picking, Packing and PGI needs to happen/post via Idoc. (By packing here, i refer to assign the HUs that are already created for the materials and is available in the storage location and not repacking)
Is there any standard IDoc that can be used here to Pick, Pack and post PGI. We would like to have picking and packing in a first idoc and PGI on the second idoc.
Thanks,
PrashantHi Typewriter,
Thanks for your reply on this post..
The business process is as below (it was changed recently to have the creation of OBD, pick HUS and then post GI via single IDOC)
1. We have a storage loc in our enterprise structure that is HU managed but not WM managed.
2. This storage loc is being maintained by a third party.
3. SO will be created to be shipped out of this plant/sloc.
3. The stocks at this storage loc will be Special stock "E" against the sales order. And the stocks will be Packed in HUs.
4. The third party is informed to deliver the stocks (HUs - that do have the special stock number which internally refers to the the SO number and the line item number) directly to ship to party address in SO.
5. The 3rd party will physically ship the HUs to customer and send in the details that they have shipped goods against the sales order.
6. The details sent by the 3rd party will be received in SAP to create OBD for the sales order, Pick, Pack and post GI. This can happen via a single IDOC..
I am now planning to create a custom IDOC type referring to the standard IDOC type DELVRY03 and message type DESADV and to use a custom BAPI/FM.
Do you think I am using the right ones?
Thanks,
Prashant Kumar -
Whats the table for picking & Packing?
Hi!
Whats the table for picking & packing ? whats their primary field? & How it is linked with sales order table/
Thanks
Imran.the table and the fields are :
table VEKP Handling Unit - Header Table
field in the above table are :
fields Description
ANZGL Number of Similar Packaging Materials
VHILM Packaging Materials
VBELN_GEN Delivery in Which Packaging Material Is Generated as an Item
VHART Packaging Material Type
MAGRV Material Group: Packaging Materials
VELTP Packaging Material Category
VPOBJ Packing Object
KZGVH Packaging Material is Closed Packaging
ADGE_DG Packing Level is Relevant for Dangerous Goods
ADGE_DGPR Indicator: Packing level is relevant for printing
PACKVORSCHR Packing instruction
PACKVORSCHR_ST Local packing status for a single HU (without sub HUs) ....
<b>there is link b/t VEPO and VEKP with field VENUM .... then </b>
<b>there is link b't VEPO and VBUK , VBAK ,VBAP etc with field
VBELN</b>
so with VEPO table you can connect sales tables and VEKP packing table ...
reward points if it is usefull ....
Girish -
Pick Pack Manager - change Priority
Hi
I want to use the BP Priority field to assign a delivery run for a customer. 95% of the time the customers who own shops never change their delivery route therefore I can use the Pick /Pack Manager to create Picking lists for individual truck deliveries every day.
However, on the odd occasion, the customer changes their mind and has goods delivered to their home address/ thus a different truck and different Priority/Run.
I've tried using a FS to bring Priority / Run through to SO and changed but the Pick /Pack Manager pulls data from the BP Master and this didn't work.
We have Boyum to use if required.
Has anyone done this easily before or do I have to resort to either manual change or SDK???
MarilynHi Marylin,
As I understand you decided to use the Priority field because it is exposed in Pick&Pack? If this is the case I would try to use a field which is also exposed in the sales order, for instance the Shipping Type. In the order the Shipping Type is pulled from the BP master but you can change it for that one transaction, and in P&P it is pulled from the order and therefore would solve your issue.
However I understand you might use the Shipping Type already for something else.
Regards,
Nat -
Pick/pack time and loading time in route
HI People,
If I make entry in the shipping point that loading time and pick/pack time as route dependent then where do I enter these times in route as I didn't find any feild to enter these in routes.You can control scheduling by sales doc type & shipping point. Logical path - Logistic Execution-shipping-basic shipping function -scheduling-delivery scheduling & Transportation sch.
Trasportation planning will determine below mentioned fields.
Check-in
Loading start
Loading end
Shpmt completion
Shipment start
Shipment end.
Picking, packing will be controlled by delivery scheduling
give me ur email id will forward u the document for it
Regards,
Krishna O
Maybe you are looking for
-
Open letter to Steve Gotz.
Dear Steve, A few yers ago you got me to purchase Aspect for HDV editing. It was a wise decision. Today I am so used to Aspect that I never used anything else. Meanwhile CS3 has evolved and new formats have appeared. The EX1, P2, and other footage ca
-
Hi, Two questions about costomer deposit... The business requires customer deposit for certain customers (not all customers) and wants to block the production or external procurement created from the sales order (we are in make-to-order business) unt
-
Safari recently started crashing help.
For some reason my safari started crashing recently... Here's my crash report Process: Safari [2795] Path: /Applications/Safari.app/Contents/MacOS/Safari Identifier: com.apple.Safari Version: 5.1.2 (6534.52.7) Build In
-
HELP! multiple email addresses, need to consolidate and forward all at once
1. I have 2 email addresses and would like to have only one. I tried to cancel my old email account, but apparently it is still open 2. If I do have 2 email accounts, I would like to cancel it and make sure that I'm not paying for 2 accounts 3. In th
-
What's the mean Scrub in logic pro
Hi! at "preferences->Audio->Core Audio" this Tab. what's the mean "Maximum Scrub Speed" Thanks