Pick Release fails with APP-18237 Error. Invalid quantity
Hi,
I am trying to Pick Releae a Sales Order Line, the line is having Scheduled Status ='Reserved'
But, while pick releasing it shows below error message:
Picking Line: 217753 Detail: 190168 Item: 2
Transactable: Y Reservable: Y
Requested Quantity: 5
Autodetailed Quantity: 0
Available to Reserve: 0
Error Code: 8
Message:
APP-18237 Error. Invalid quantity
Can anyone explain, when or how a Sales Order line with Reserved Status, will show the above error?
Thanks,
Gowri
Please see if the following docs help.
Pick Release Error: 'Could not Create Move Order Line for Delivery Detail'. (Doc ID 748927.1)
Cannot Pick Release Non-Inventory OPM Items In R12 (Doc ID 1481238.1)
Pick Slip Report Complete With Null Value After Release Sales Order (Doc ID 1362175.1)
If none of the above helps, you may log a SR.
Thanks,
Hussein
Similar Messages
-
R12.1.3 - Pick release for batches completing in error during upgrade
Hi,
We are upgrading from 11.5.9 to 12.1.3. Pick release for batches fails with the following error message in log file.
The delivery lines given in the log file all have sub-inventory restricted items. We don't use WMS.
Any help/pointers greatly appreciated!
Scenario:
=======
Batch pick release performed for sub-inventory "A". The program "Pick Selection List Generation" fails with the following error message.
Items on the failed delivery lines are sub-inventory restricted and assigned to sub-inventories "B", "C" & "D".
Error Message:
============
Could not Create Move Order Line for Delivery Detail XXXXX
Delete Line 9.990000000000000000000000000000000000000000000000000000000000000000
000000000000000000000000000E+125
Error occurred in Inv_Pick_Release_Pub.Pick_Release
ORA-22160: element at index [32] does not exist in Package INV_Pick_Release_PUB
Procedure Pick_Release
Unexpected error from INV_Pick_Release_Pub.Pick_Release. Exiting
SQLCODE: 1 SQLERRM: User-Defined Exception
Exception occurred in WSH_PICK_LIST.Release_Batch_Sub
Error occurred in Release_Batch_Sub
SQLCODE: 1 SQLERRM: User-Defined Exception
Exception occurred in WSH_PICK_LIST
Thanks,
Renganayaki SPlease see if the following docs help.
Pick Release Error: 'Could not Create Move Order Line for Delivery Detail'. (Doc ID 748927.1)
Cannot Pick Release Non-Inventory OPM Items In R12 (Doc ID 1481238.1)
Pick Slip Report Complete With Null Value After Release Sales Order (Doc ID 1362175.1)
If none of the above helps, you may log a SR.
Thanks,
Hussein -
Reg : Datapump export failing with ORA-31633 error
Hi,
I am trying to export one of the production databases (10.2.0.4.0) using datapump - backup is failing with the following error.
[UBASE2]:/backup/exports/scripts>more /backup/exports/cron/cron_UBASE_log
Export Start
Sat Oct 10 10:32:00 GMT 2009
Export: Release 10.2.0.4.0 - 64bit Production on Saturday, 10 October, 2009 10:32:00
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORA-31626: job does not exist
ORA-31633: unable to create master table "SYSTEM.FULL_UBASE"
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 95
ORA-06512: at "SYS.KUPV$FT", line 871
ORA-00955: name is already used by an existing object
Export End
Sat Oct 10 10:32:01 GMT 2009
I tried to attach to the existing job to kill that, but i am getting the below error -
[UBASE2]:/backup/exports/scripts>expdp attach=FULL_UBASE
Export: Release 10.2.0.4.0 - 64bit Production on Saturday, 10 October, 2009 14:31:46
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Username: / as sysdba
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - 64bit Production
With the Partitioning, Real Application Clusters, OLAP, Data Mining
and Real Application Testing options
ORA-31626: job does not exist
ORA-06512: at "SYS.DBMS_SYS_ERROR", line 79
ORA-06512: at "SYS.KUPV$FT", line 438
ORA-31638: cannot attach to job FULL_UBASE for user SYS
ORA-31632: master table "SYS.FULL_UBASE" not found, invalid, or inaccessible
ORA-00942: table or view does not exist
As this is critical production database please help me how to resolve this.
Thanks in Advance.
Raju A
Oracle DBA.Hi,
Have you verified if your DBMS_AQ environment has been corrupted? If so, then you'll have to drop and recreate a number of queue related objects all over again. Furthermore, ORA-00942 appears to be the main problem as it is a case sensitivity error. You should change the table names to UPPERCASE and then try again.
Hope this helps.
Regards,
Naveed. -
Receipt Reconciliation Fails With APP-AR-999967188
Hi,
I am facing the below error while reconciling my remittance batch with the bank statement.
Receipt Reconciliation Fails With APP-AR-999967188 The Receipt is in the Process Of Funds Capture Settlement.
As per Oracle metalink note we applied the Patch 10389524:R12.AR.B
But still we are not able to reconcile the existing bank statement line with the remittance batch.
Please advise how resolve this issue.
Regards,
Sivakumaruser9312135 wrote:
Hi,
I am facing the below error while reconciling my remittance batch with the bank statement.
Receipt Reconciliation Fails With APP-AR-999967188 The Receipt is in the Process Of Funds Capture Settlement.
As per Oracle metalink note we applied the Patch 10389524:R12.AR.B
But still we are not able to reconcile the existing bank statement line with the remittance batch.
Please advise how resolve this issue.
Regards,
SivakumarPlease see these docs.
Receipt Reconciliation Fails With APP-AR-999967188 The Receipt is in the Process Of Funds Capture Settlement [ID 1283597.1]
Upgrade issue: APP-AR-999967188 Receipt Number Is In Process Of Funds Capture Settlement (Paypal) [ID 1402665.1]
Thanks,
Hussein -
Job is failing with the following error- Error calling a method of the tree
dear SDNers,
my question is where do i need to look for error.
Will this be an ABAP issue?
Please guide
DETAILS
In SM37 when we see the job XYZ, we get the following details.
Job Ln Job CreatedB Status Start date Start time Duration(sec.) Delay (sec.)
XYZ Canceled 16.11.2009 10:11:30 9 27
When the job log is checked this , we get the below details.
The job XYZ is failing with the following error.
Date Time Class No. Message
+----
+----
2009/11/16 05:03:01 | 00 516 | Job started
2009/11/16 05:03:01 | 00 550 | Step 001 started (program RBDMON00, variant
SBCI287, user ID ABCDEF)
2009/11/16 05:03:03 | TREE_C 000 | Error calling a method of the tree control
2009/11/16 05:03:03 | 00 518 | Job cancelled
Equest your assistance in knowing where to find the error for this.
I have no clue as to where and how i need to debug or where i should i be looking for error.
In BD87, the selection screen paramters that are given are changed on date (from and to) and IDOC status 51,66,69 and 64 and the message type is "Öutbound interface of picked shipments"
Please guide.
Regards,
SuryaD.
Edited by: SuryaD on Nov 23, 2009 5:36 PM
Edited by: SuryaD on Nov 23, 2009 11:14 PM> 1. There is a job name ABCDEF
> 2. When this job is run then the status shows cancelled and the job error log shows tHe details that "error calling a method of the tree control"
> 3.ThIs error also points fingers to /link to BD87 as seen in the job log " (program RBDMON00, variant \SBCI287, user ID KRISF)"
>
BD87 is an IDOC processing.
> My question to you Sampath.
>
> in order to answer your question on whether it is ALv or SALV.. please tell me as to how will i know which progrm is associated with the job ABCDEF?
>
Go to sm37 - double click on the job that was failed - Click on Step (on application tool bar) to get the program name - double click on the program name - new popup will be opened - then copy the program and variant
Go to se38 - enter the program - execute (F8) - choose the variant that is there in the background job - run in forground first
if the run is good - then check the program - SE38 - Display the program then see
I just saw the above message BD87... .if that is true, you dont have to do all these
I dont think it is possible to schedule a job with BD87. Is this the first time or is any job completed without errors for this? -
[SOLVED]linux-headers upgrade fails with PGP signature error
Whe trying to upgrade the linux kernel using:
pacman -S linux linux-headers
it fails with the following error:
(2/2) checking package integrity [#################################] 100%
error: linux: signature from "Tobias Powalowski <[email protected]>" is unknown trust
error: linux-headers: signature from "Tobias Powalowski <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded.
I have tried deleting /etc/pacman.d/gnupg and the recreating it with
pacman-key --init
, I have also run
pacman -Syy
to make sure the repository is up to date. I read the wiki post about time, but my ntp daemon is running, and I have confirmed that my time is exactly right.
Last edited by MikeDacre (2013-04-01 23:32:27)Hi,
Sorry, but that doesn't help me. I can't find any reference in that post to this problem. I get a similar issue when I try to upgrade mysql:
>> sudo pacman -S mariadb libmariadbclient mariadb-clients 16:06 Mon 04-01-2013
resolving dependencies...
looking for inter-conflicts...
:: libmariadbclient and libmysqlclient are in conflict. Remove libmysqlclient? [y/N] y
:: mariadb-clients and mysql-clients are in conflict. Remove mysql-clients? [y/N] y
:: mariadb and mysql are in conflict. Remove mysql? [y/N] y
Targets (6): libmysqlclient-5.5.30-6 [removal] mysql-5.5.30-6 [removal]
mysql-clients-5.5.30-6 [removal] libmariadbclient-5.5.30-2 mariadb-5.5.30-2
mariadb-clients-5.5.30-2
Total Download Size: 16.85 MiB
Total Installed Size: 152.41 MiB
Net Upgrade Size: 28.51 MiB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
libmariadbclient-5.5.30-2-x86_64 6.6 MiB 1479K/s 00:05 [#################################] 100%
mariadb-clients-5.5.30-2-x86_64 871.8 KiB 421K/s 00:02 [#################################] 100%
mariadb-5.5.30-2-x86_64 9.4 MiB 440K/s 00:22 [#################################] 100%
(3/3) checking package integrity [#################################] 100%
error: libmariadbclient: key "BBE43771487328A9" is unknown
:: Import PGP key , "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
error: key "Bartlomiej Piotrowski <[email protected]>" could not be imported
error: mariadb-clients: key "BBE43771487328A9" is unknown
:: Import PGP key 487328A9, "Bartlomiej Piotrowski <[email protected]>", created 2011-10-10? [Y/n] y
(3/3) checking package integrity [#################################] 100%
error: libmariadbclient: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: mariadb-clients: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: mariadb: signature from "Bartlomiej Piotrowski <[email protected]>" is unknown trust
error: failed to commit transaction (invalid or corrupted package (PGP signature))
Errors occurred, no packages were upgraded. -
Updating Address Fails With APP-PER-52473
Updating Address Fails With APP-PER-52473 "You must enter a secondary address dated later than the primary address."
I have an issue w/ updating addresses. The form throws the PER-52473 error. The thing is- my client never assigned primary addresses in the system. Thus, we need to update the data accordingly. I have about 4 addresses per person. From metalink, I assumed all I needed to do was to end-date 3 of them, and flag one as PRIMARY. This still fails. Maybe I am missing something? Is there another step? Another table?
My question- how do I make this error go away. I have been playing around with end-dates and primary flags, over lapping and non-overlapping dates, and no luck. Any assistance would be great. Thanks.
ADDRESS_ID BUSINESS_GROUP_ID DATE_FROM DATE_TO PRIMARY_FLAG STYLE
11968417 101 11-MAR-09 null Y 10
11968419 101 15-JUL-08 10-MAR-09 N 10
11968420 101 13-JUL-08 14-JUL-08 N 10
11968421 101 11-JUL-08 12-JUL-08 N 10Looks like a bug.
Per_Addreses is a Dated table and not a date-track table.
So you can still have -
11968417 101 11-MAR-09 null N 10
11968419 101 15-JUL-08 null N 10
11968420 101 13-JUL-08 null N 10
11968421 101 11-JUL-08 null Y 10
Why can't you create your latest address(primary) also effective employee start_date ?
As of system date your primary will be the one you can refer in reports/processes. So there will be no harm.
Where exactly are you using the addresses ?
Can you not have overlapping addresses ?
cheers,
Vignesh -
Custom concurrent program failing with Signal 6 error
Custom concurrent program failing with the below error ,
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Enter Password:
# An unexpected error has been detected by HotSpot Virtual
Machine:
# SIGSEGV (0xb) at pc=0xf608fd7e, pid=16054, tid=3417308016
# Java VM: Java HotSpot(TM) Server VM (1.4.2_14-b05 mixed mode)
# Problematic frame:
# C [libca.so.0+0x2dd7e] caupzsearch+0x1e
Help needed to debug this error.
Regards,Please post details of application release, database version and OS.
Is the issue with one specific custom concurrent program? What is the type of this CP? Has this ever worked?
Please enable trace/debug as per (How To Trace a Concurrent Request And Generate TKPROF File (Doc ID 453527.1)) and see if more details are collected in the log then.
Thanks,
Hussein -
Windows 2008 R2 backup fails with event 521 error code 2155348001
Windows Server 2008 R2 SP1. Hyper-V role installed.
OS on drive C. All VMs stored on Drive D.
I am attempting to run a Bare Metal backup of the host system to a network share.
Drive D is not included in the backup job. I am getting the following error:
Log Name: Application
Source: Microsoft-Windows-Backup
Date: 1/10/2014 11:28:52 PM
Event ID: 521
Task Category: None
Level: Error
Keywords:
User: SYSTEM
Computer: SHAQTUS.scdl.local
Description:
The backup operation that started at '2014-01-11T04:08:50.683000000Z' has failed because the Volume Shadow Copy Service operation to create a shadow copy of the volumes being backed up failed with following error code '2155348001'. Please review the event
details for a solution, and then rerun the backup operation once the issue is resolved.
Reviewing event details, as suggested, does not offer any solution.
I have tried the suggested solutions in other similar threads of increasing the timeout value with the registry entry.
This does not work.
I have not tried reregistering the VSS writers manually, as the only links I have found are for server 2003/2008 (not R2) and explicitly state that they won’t work on higher versions of the OS, since they now utilize manifests and the manual procedure could
cause problems for those servers. Haven't found similar procedures for 2008 R2.
I have been able to narrow this down a bit.
A Windows 2008 R2 SP1 server with Hyper-V installed – backup to a network share is successful;
Install the DPM 2012 agent – same backup fails with the 2155348001 error.
We use DPM 2012 to backup VMs, but DPM cannot perform a bare metal backup/restore of server and the 2012 version no longer has the DPMSRT feature.
I prefer to run Bare Metal Backup to a file server share.
Stuck on this one.
RickHi,
The issue is related to DPM, I would suggest you ask for help from DPM forums:
http://social.technet.microsoft.com/Forums/en-US/home?forum=dataprotectionmanager
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Windows 8 USB recovery fails with CTOERROR.flg error
Windows 8 recovery using HP supplied USB recovery device failed with CTOERROR.flg error.
[22:53:29.29] ChkErrBB.CMD : Detect some error during PININST_BBV.
[22:53:29.31] ChkErrBB.CMD : Check c:\system.sav\logs\BurnBootWarn.log
[22:53:29.31] ChkErrBB.CMD : or, check c:\system.sav\logs\BurnBootMerge.log
I have tried all the scenarios which are described in this forum but no success.
Can anyone suggest to which date should i reset the BIOS or anyother workarounds??
I have run diagnostic tests on Memory and Disks and both are fine.
* There is a big problem with the HP recovery manager which fails to recover windows. Many have reported in this forum and other forums....but HP has failed to attend this issue and fix the problem in their recovery manger or atleast show a workaround to restore the windows.
My laptop was drastically slow after the reinstall from the HP support.....and now when i decided to reset and recover the windows.....it fails. Unfortunately my laptop is out of warranty.
This is pushing me away from any HP and will never ever buy or recommend anyone to buy a HP product.
History about previous issue with this laptop:
Order # BDRN598901
Order # BDTP356101
* I had an issue with the HP recovery manager in creating recovery disc. I did contact the HP support as my warranty was still in place. They took my laptop and reinstalled the OS and sent it back to me.
Even after that i could not create a recovery disk and they send me a USB recovery device.
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment
BDTP356101 USB - WINDOWS 8 64B RECOVERY KIT SW FULFILLMENT POSTAL DELIVERY GROUND Shipped 05/05/2014 POSTAL SERVICE (STANDARD)
Service Order Product Service Event Order Status Estimated Delivery Date *MM/DD/YYYY Track this Shipment BDRN598901 HP ENVY 4-1115DX TouchSmart Ultrabook BOX PLUS PICKUP & REPAIR, 2 DAY SHIPPING Shipped 04/30/2014 FED-EX NEXT DAY (AFTERNOON)
Thanks,
KB29Set the date in BIOS to 1/02/2012. Save & Exit. Boot with Recovery, let it run through the process- but on the first reboot initiated by recovery enter BIOS again to insure date is still set to 2012. If not change it again, then let recovery resume.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others** -
I had a problem with the hard disk on a 13" 2010 macbook pro. Replaced the hard disk with an Hitachi 1TB disk but when I tried to erase and format, it fails with input/output error and at other times saying unable to allocate memory. Any help much appreciated!
Zap the PRAM and Reset the SMC, then try again.
-
Package failed with run time error: " GETWA_NOT_ASSIGNED".
Hi,
One of our custom package is failing with run time error " GETWA_NOT_ASSIGNED". We are getting this error after refresh. Infact this package is working fine both in production and Dev, but in QA system it giving runtime error.
Here with I am pasting run time error details. Please see...If any one have any idea or clue or if you have faced this kind of error.
Thanks is advance.
Error Details.
What happened?
Error in the ABAP Application Program
The current ABAP program "CL_UJK_CUSTOM_LOGIC===========CP" had to be
terminated because it has
come across a statement that unfortunately cannot be executed.
What can you do?
Note down which actions and inputs caused the error.
To process the problem further, contact you SAP system
administrator.
Using Transaction ST22 for ABAP Dump Analysis, you can look
at and manage termination messages, and you can also
keep them for a long time.
Error analysis
You attempted to access an unassigned field symbol
(data segment 32774).
This error may occur if
- You address a typed field symbol before it has been set with
ASSIGN
- You address a field symbol that pointed to the line of an
internal table that was deleted
- You address a field symbol that was previously reset using
UNASSIGN or that pointed to a local field that no
longer exists
- You address a global function interface, although the
respective function module is not active - that is, is
not in the list of active calls. The list of active calls
can be taken from this short dump.
Regards, TrineHi Trine,
the error is about some field you are trying to map using field-simbols, that is diferent in the other system.
Go to the code program in the st22, there you will see when the erros occurs e what field gives the error.
Best Regards,
António -
Hi!
We have 5 Exchange 2013 servers and when I’m trying to run a script that includes the cmd-let Get-MessageTrackinglog with StartDate = the first of the month and with EndDate = the end of the month I get the following error message after
a couple of hours. The script is run on the server SERVER01 and goes through the Message Tracking logs of all Exchange servers. I have tried the script on other servers and get the same result.
Processing data for a remote command failed with the following error message: Error occurred during the Kerberos reponse.
[Server=SERVER01, TimeStamp = 918/2014 19:32:34]
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo
: OperationStopped: (server01.domain.com:String) [], PSRemotingTransportException
+ FullyQualifiedErrorId : JobFailure
+ PSComputerName
: server01.domain.com
I have gone through “about_Remote_Troubleshooting Help topic”, but can’t find anything related to my issue. There is nothing in the Application or the Windows PowerShell log either.
/HenrikHi Henado
Check the time on your Exchange server(s) relative to the DCs and ensure they are in correct sync
Use another account which is assigned the Organization Management permission and log to to the server run the command in shell and see the results
Run
Add-PSSnapin -Name Microsoft.Exchange.Management.PowerShell.E2010
Set-Adserversettings -ViewEntireForest $True and then run message tracking command and see the results
If none of the above helps you may need to remove and re-install the WinRM and see the results
Good Luck :)
Remember to mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you Check out my latest blog posts on http://exchangequery.com -
Background job failing with license check error
Hi Experts
In our ERP 6.0 system ,all the background jobs are failing with license check error.
Have checked the license in SLICENSE and the license is fine.
There is no warning while users are loggign in ,but when any background job is runing its failing with error
Job started
Logon not possible (error in license check)
Job cancelled after system exception ERROR_MESSAGE
Also performed the license test which is failing
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\XX1_DVEBMGS00_host_xx
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = hostname
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
Please suggest how to troubleshoot.
Regards
Ajay@Michael
In SLICENSe the Hardware key field is not BLUE or BLACK and its showing the exact hardware key which i can see at OS level with saplicense -get command.
@Jagadish
Note is good refrence, i reiinstalled the Digitally signed license with saplikey command and it was successful.
But still the license test is failing at OS Level..below is the command prompt output.
===================================================================
F:\usr\sap\XX1\SYS\exe\uc\NTAMD64>saplikey -install C:\license_script_XX.txt pf
=F:\usr\sap\XX\SYS\profile\XX_DVEBMGS00_mngsez148079
SAP License Key Administration - Copyright (C) 2003 SAP AG
2 SAP license key(s) successfully installed.
F:\usr\sap\XX\SYS\exe\uc\NTAMD64>saplicense -test pf=F:\usr\sap\XX1\SYS\profile
\MD1_DVEBMGS00_mngsez148079
Protocol saplicense test:
Read sapsytem name
ok, sapsytem name = XX1
Read message server host
ok, host = host
Read message server service port
ok, service port = sapmsXX1
Connect to message server
ok, connect done
Read hardware key from message server
ok, got hardware key
Detach from message server
ok, detached
Check hardware key
ok, hardware key = T0343073854
Connect to database
ok, connected
Check license
ok, check done
Disconnect database
ok, database disconnected
test result: license test failed
LICENSE system: XX1 hardware key: T0343073854 expiration_date:
installation no: key:
userlimit: 0 productid: R3_BASIS
system-nr:
license expired ***
============================================================
@Juan
The hardware key was changed and we requested a new license with new hardware key,system was runing fine for couple of weeks with all background jiobs for SPAM./SAINT Ok .We performed EHP4 on this system.
But now this issue is here,so i guess we should troubleshoot.
Please let me know any other pointers.
Regards
Ajay
PS In SLICENSE new installed license is fine and all users can login. -
Hi,
I am trying to install certificate services on a windows 2008 server (R2 ENT SP1) with a PCIe nCipher HSM module installed on it. The version of nCipher SW is = 11.30. It is a RootCA, and I am trying to use a key that is already stored in the HSM (I
have done this before with a PCI HSM (older HW version)). I select “Use existing private key” and “Select an existing private key on this computer” on the wizard, then i change the CSP to nCipher and click on "search" the key I am looking for
appears and I select that one. I repeat, I have done this before and it works with a PCI HSM module.
The installation is finished before being prompted to insert the operator cards, and it ends with two errors:
<Error>: Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
And:
<Error>: Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct state to perform the requested operation.
0x8007139f (WIN32: 5023)
The servermanager.log says:
1856: 2014-07-23 18:27:48.195 [CAManager] Sync: Validity period units: Years
1856: 2014-07-23 18:27:48.928 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x800703E5): CCertSrvSetup::Install: Overlapped I/O operation is in progress. 0x800703e5 (WIN32: 997)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:48.928 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: Overlapped I/O operation is in progress.
0x800703e5 (WIN32: 997)'
1856: 2014-07-23 18:27:48.928 [Provider] Adding error message.
1856: 2014-07-23 18:27:48.928 [Provider] [STAT] For 'Certification Authority':
And:
1856: 2014-07-23 18:27:49.053 [CAWebProxyManager] Sync: Initializing defaults
1856: 2014-07-23 18:27:49.162 [Provider] Error (Id=0) System.Runtime.InteropServices.COMException (0x8007139F): CCertSrvSetup::Install: The group or resource is not in the correct state to perform the requested operation. 0x8007139f (WIN32: 5023)
at Microsoft.CertificateServices.Setup.Interop.CCertSrvSetupClass.Install()
at Microsoft.Windows.ServerManager.CertificateServer.CertificateServerRoleProvider.Configure(InstallableFeatureInformation featureInfo, DiscoveryResult discoveryResult, ChangeTracker changeTracker)
1856: 2014-07-23 18:27:49.162 [Provider] CAErrorID: 0, CAErrorString: 'Active Directory Certificate Services setup failed with the following error: The group or resource is not in the correct
state to perform the requested operation. 0x8007139f (WIN32: 5023)'
1856: 2014-07-23 18:27:49.162 [Provider] Adding error message.
Has anyone experienced this before? Am I missing something here?
Any help will be very appreciated
Thanks in advance
Best regards
Alejandro Lozano VillanuevaHi, thanks for your support.
I have been playing around a bit with some ncipher commands and found this:
C:\Program Files (x86)\nCipher\nfast\bin>cspcheck.exe
cspcheck: fatal error: File key_mscapi_container-1c44b9424a23f6cddc91e8a065241a0
9aa719e4f (key #1): 0 modules contain the counter (NVRAM file ID 021c44b9424a23f
6cddc91)
cspcheck: information: 2 containers and 2 keys found.
cspcheck: fatal error occurred.
If I perform the same command on the original server (the server with the original kmdata folder and with the running RootCA services):
E:\nfast\bin>cspcheck.exe
cspcheck: information: 2 containers and 2 keys found.
cspcheck: everything seems to be in order.
Strange?
Moreover, when I do a csptest.exe command (also on both servers, i find this)
On the new server:
C:\Program Files (x86)\nCipher\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.48
User key containers:
Container 'csptest.exe' has no stored keys.
Container 'Administrator' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has no stored keys.
Container 'csptest.exe' has no stored keys.
While in the old server:
E:\nfast\bin>csptest.exe
nCipher CSP test software
=========================
Found the nCipher domestic CSP named 'nCipher Enhanced Cryptographic Provider'
Provider name: nCipher Enhanced Cryptographic Provider
Version number: 1.40
User key containers:
Container 'csptest.exe' has no stored keys.
Machine key containers:
Container '352dd28a-17cb-4c6f-b6e4-bf39bcf75db5' has a 2048-bit signature key.
Container 'ROOTCA' has a 2048-bit signature key.
Container 'csptest.exe' has no stored keys.
As you can see, the container called ROOTCA, which is the one that I use during the installation, says it has no stored keys. While on the old server, it says it contains a key. Why is this happening? I dont know, I am copying the complete
key management folder from one server to another and initialize the security world with that folder as I always do, and i dont have any errors during this procedure.
Do you know what could be the cause of this? or how can I fix this? Thanks a lot, best regards.
Alejandro Lozano Villanueva
Maybe you are looking for
-
Sync or ASync for a Data Warehouse environment?
We have a 7 TB DW environment that we're using High Availability on. Almost all of the data is bulk loaded nightly/ weekly. We've been running this in Sync-commit mode, but lately the Transaction Log in our Primary DB has grown to > 1/2 TB waiting on
-
[SOLVED] Compiling smaragd
Hi, I'm trying to compile smaragd (or smaragd-git, same problem) and this is the output: ==> Building and installing package ==> Making package: smaragd 0.0.7-1 (Sun Nov 17 14:43:45 CET 2013) ==> Checking runtime dependencies... ==> Checking buildtim
-
Why my Trackpad Handwriting is not working ?
Hi support team: I can open my Trackpad Handwriting, but the trackpad is not working. Even though restart it again? After I download Adblock and put this: defaults write com.apple.Safari WebKitResourceTimedLayoutDelay 0.0001 into my Terminal my Track
-
WCS AP Templates help. Vlan Override Issue
Hi all, WCS ver 5.2.110.0 When I create a LWAP template, to apply a WLAN override to all my APs, the WLAN I'm looking for is not in the list. Previous WLANs are listed, that are no longer resident on the WLC4404. The current WLAN configured in the WL
-
Hi all, I'm new to iWeb, but am very much enjoying putting a website together myself. When using the available templates, it seems that I cannot have a page that continues further down than where the template finishes. Is there a way around this? I w