Picked Quantity is not updated After delivery in Vl03n

After delivey in Order (VA03), the picked quantity is not updated Properly(VL03n). It is coming as Zero.
Is it any configurations needed or writng any code.
For that I put Break point in FMs like SD_DELIVERY_UPDATE_PICKING in program RVADEK01.
But it is not stopping the Program.
Please give any possible solution.

Hi Vinod,
Thank u For ur Answer.
Just my Fuctional Consultant given Procedure.
How to test the picking list. The problem is after Deliver the Order quantity in VA03 and after saving, this will creates One Out Bound delivery.
Now We r checking VL03n. Now it is updating the Picked Quantity Correctly, For that We r using the Standard Print program: RVADEK01, Form: RVPICSKSIN.
Output Type: EK00, Application: V4.
Here My problem is We copied the Form and print Program and modified according to our requirement and they configured in Nace with our own Output type. We haven't chenged the updated Functionality and Not even Standard program. We wrote some include program for getting new values in scripts.
Now the picked quantity is not updated after picking in VL03n.

Similar Messages

PO item change is not updated after Delivery completion

Dear All,
PO item change is not updated in the PO at the completion of the delivery.for a particular line item. In our QA system, its updated but client is facing an issue with the production system. Pls check the attached screen which I got from QA. There is no such log in the production system. Kindly help me to have a solution for this.
Regards
Sujith

Hi Dev,
After we post the GR for a PO line item, PO history is updated (line) and at the same time that particular change log is available under PO line item. But in production system, said log is not updated after GR is completed fully.
Rgs
Sujith

SIS- Updating- Open Orders value and quantity not updated after delivery

Dear Guru's
in the SIS transaction MCTA
when i create the sales order the values in the fields
incoming sales ,sales,credit memo,open orders ,open orders etc
are getting updated correctly
but after creating the delivery,pgi and billing these values are not getting updated .like the reduce in the open order,open oerder qty they same as earlier afer creating sales order.
if i cancel the order then the values are again updated accordingly
can you please suggest me a solution for this problem,why this is happening of not geting updated after doing delivery and pgi
waiting for the reply
thanks in advance
ramana

Hi,
Your query revolve's around LIS reporting. For any reporting, SAP recommended solution is SAP BI
FYI SAP is not going to continue Support for LIS Based reporting.Developement on LIS based reporting is already stopped.
Companies still use this tool to manage their reporting.
Not all the key figures are updated by default. In your case you will have to carry out the enhancement.
Please go through the following path:
SPRO - Logistics General - Logistics Information System --- Check Help on Data Enhancement.
Rgds

Status is not updated from delivery to sales order item.

Dear Folks,
One user created sales order with 10 line items and he created delivery and later he deleted line item 30 in that delivery document and with remaining 9 line item he done the PGI & Billing.Here what is the problem is the deleted line item in sales order status showing as completed and delivered quatity showing as 10.Status is not updated from delivery to sales order item.Please let me know how to resolve this?
Thanks & Regards,
murali.

Dear Murali,
Please go to VTLA transaction then select your delivery and order types after that go in to the details of the item level settings here you check field called Update document flow under Control data tab.
I hope it will help you,
Regards,
Murali.

Accounting Document not updated after Vf01(billing)

Hi Gurus,
After creating invoice in vf01 when i m looking at accounting document, then my value is updated but the quantity is not updated in fb02.
when i see table BSEG then the value of MENGE is not updated there.
It is always coming ZERO.
Thanks in advance

Hi
Please check whether FI doculments summarisation is active for this field under procedure VBRK.
Regards

Recent files list is not updating after 10.1.13

Recent files list is not updating after 10.1.13 update unless I open the file via the Network in Windows Explorer. If I open a file by accessing the file via a drive listed under Computer, the recent files list does not update. The recent files list updates only if I open the file from the same drive listed under Network.

Hi Bert ,
You might want to report for a possible bug.Please refer to the following link for the same.
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&loc=en
Regards
Sukrit Dhingra

Node.length not updating after removeInstance

I have a dynamic form where line items can be added dynamically. I also have a button to remove the last line item. The code worked fine until Acrobat 7.0.7 now I get an error that the index in the removeInstance method is invalid. After doing some debugging it appears that the node.length is not updating after a removal of an instance.
For example, the form starts with 1 line item. (node.length = 2, index = 0)
I can successfully add a new line item (node.length = 3, index = 1)
I then can add another line item (node.length = 4, index = 2)
I can successfully delete the last line item (index = 2) using the following code:
var nodelength = form1.items.nodes.length;
//need to know which instance is being removed
if(nodelength>2){
items.item.instanceManager.removeInstance(nodelength-2);
else if(nodelength==2){
form1.items.items.Status.rawValue = "";
form1.items.items.guestName.rawValue = "";
form1.items.items.Payment.rawValue = "";
form1.items.items.Entree.rawValue = "";
At this point the items.node.length property should be 3 but it remains 4 thus causing an error when running the above script again because there is no corresponding item to remove.
This appears to be a bug - but if I am doing something wrong please let me know. If it is a bug, please fix it.

This sounds like a bug I recently encountered. If it's the same thing then calling xfa.form.remerge() after the removeInstance() should correct the problem. If it is the same issue, it's already been logged in order to get it fixed.
Chris
Adobe Enterprise Developer Support

Thumbnails not updating after external editing.

I noticed the thumbnails are not updating after I use an external editor. When I bring the images full screen are they are representing correctly, but when I leave full screen the thumbnail still is not the latest image.
I tried the update preview and Aperture said it they are updated, so I did an option and update preview and that corrected them, but this should be happening automatically.
I did try restarting Aperture before the doing the "option - update preview" and that had no effect.

Do you mean it is suppose to be fixed in 3.0.1? Or do I have to wait until a 3.1 comes out.
I am using 3.0.1 now and that is where I am seeing the issue.

Ipad mini apps not updating after ios8.2 update

apps not updating after software update ios8.2 on ipaD MINI WITH RETINA SCREEN

Turn off any auto-update, if it is on, then tap any of the "circle icons" showing that a download is in progress, in order to stop the download. Then go to the Settings and reset the Network Settings. After the iPad starts back up, then check to make sure no apps are currently in progress of downloading. If any are, stop them again, and reset the network settings again. When it starts up again, none should be in the process of downloading. Then from that point forward, only download manually and never more than two at a time. If it is more than 100 MB, then do only one at a time. If any gets stuck at that point, then stop the download and reset the Network settings.
That should take care of you for now. We'll see what another update brings ... IOS 8.2 (which might be the next one).

Database history growth not updating after EHP upgrade

Hi All,
We are using SAP ECC 6.0 (731 - SP09 ) & DB2 Fix pack 5 version.Database history growth not updating after EHP upgrade. I have check collector job running fin and DB tab > Configuration > Data Collection Framework > Configuration Collector are in green status.
Please help me to resolve this issue.
Regards,
MK

Hi MK,
You can try few things:
1. Check to collector standard job like SAP_COLLECTOR_FOR_PERFMONITOR should be running succesfully.
2.If you can check to data collector collection interval column , you will find it to be Not Schedule.
Try with Repair all collector.
To make it work properly you have to perform
Data Collection Full
Data Collection Incremental
Hope it helps
BR Vaibhav

[svn:fx-i11] 5489: i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent

Revision: 5489
Author: [email protected]
Date: 2009-03-23 10:04:25 -0700 (Mon, 23 Mar 2009)
Log Message:
i11 branch: Fix SDK-20148 Group bounds do not update after moving a child UIComponent
Fix: add a method in GroupBase that's called whenever child x,y changes in UIComponent. GroupBase invalidates layout when autoLayout is true.
QE Notes: None
Doc Notes: None
Bugs: SDK-20148
Reviewer: Deepa
tests: checkintests, mustella
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-20148
http://bugs.adobe.com/jira/browse/SDK-20148
Modified Paths:
flex/sdk/branches/i11/frameworks/projects/flex4/src/mx/components/baseClasses/GroupBase.a s
flex/sdk/branches/i11/frameworks/projects/framework/src/mx/core/UIComponent.as

FYI - This regression has been filed here: http://bugs.adobe.com/jira/browse/SDK-31989

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014

Regisrty keys HKEY_CLASSES_ROOT\Photoshop.Application\CLSID and \CurVer are not updated after upgrading to cc 2014
this cause to "cant create ActiveX object" error in VB Scripts
win7 x64, ps cc 2014 x64
any ideas? thnks

All I can so is show you what I see in that area of my Windows 7 registry but I have CS2, CS6 32, CS6 64, CC 32, CC 64 and CC 2014 64 installed. 6 versions yet there seem to be 9 Photoshop Application dot keys.
Windows Registry Editor Version 5.00
[HKEY_CLASSES_ROOT\Photoshop.Application]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application\CurVer]
@="Photoshop.Application.80"
[HKEY_CLASSES_ROOT\Photoshop.Application.60]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60\CLSID]
@="{99aea70e-4d13-44bf-a878-33345cbfcbc8}"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1]
@="Photoshop CS6 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.60.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70\CLSID]
@="{951ec38c-3de6-4bb8-8246-adf182e6421d}"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1]
@="Photoshop CC Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.70.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80]
@="Photoshop Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80\CLSID]
@="{702fe898-3f8a-483f-8ca6-3bad95fa2489}"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1]
@="Photoshop CC 2014 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.80.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9\CLSID]
@="{16aa0b9e-79ac-43b5-86ca-ab961fbeed5f}"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1]
@="Photoshop CS2 Application"
[HKEY_CLASSES_ROOT\Photoshop.Application.9.1\CLSID]
@="{6DECC242-87EF-11cf-86B4-444553540000}"

Infostructure S502 not updated after certain date

There is an infostructure S502. It is not updated after a certain date.
It should be updated after saving in C011N.
This problem seems to have propped up after upgrade to ECC 6.0. Before that it was working fine.

I have tried a lot but still S502 is not properly updated. Basically the field for date i.e SPTAG is empty. Due to this when we try to select from MCRQ based on dates, no data is selected.
Is it because of some setting in MC23?

Average Active Sessions graph not updated after restart

Hi,
I just wanted to ask - I have restarted a database (11.1.0.7) with GC 11.1.0.1 but after the restart of the db the graphs on a performance tab are not updated. It means that the doesn't refresh and doesn't show actual data...
I checked jobs on the target database and GC repository but nothing is broken. Info on Home tab of the target DB is actual but not the graphs..
I also tried to clearstate and restart the agent but no change..
Any idea?
Thanks

This is a bug and can be solved by applying
Patch 10307099: PERFORMANCE CHARTS DO NOT UPDATE AFTER DATABASE IS RESTARTED
This patch is included in the july 2011 PSU: Grid Control Patch Set Update 11.1.0.1.4 for the Oracle Management Service, see MOS doc ID 1334286.1
Eric

Why do Apps not update after installing iOS6? They just hang there!

WHy do apps not update after installing iOS6?

Each time? every day? Just plain crazy! Updates happen automatically on your mac....why not the same thing on ipad/iphone?
If the app was purchased on my phone with my account, surely they do not need to "verify" my credentials each time. If my phone was stolen and someone purchased a $20 app surely my $300 phone is more important?
They need to come up with e better solution...when we all have hundred or thousands of apps on our devices what then?

Picked Quantity is not updated After delivery in Vl03n

Similar Messages

Maybe you are looking for