Picking and PGI through background job

Hi,
Can any one help to find out the programs to do Picking and PGI through background job.
Without transfer order. Just picking
Thanks and Regards
Alokam Chandra Sekhar

RLAUTA20     Create Transfer Orders for Deliveries Automatically or Immediately
RLAUTA10     Create Transfer Orders for Material Document in Background
RVV50L21     Create Background Jobs for Goods Issue Posting
WS_MONITOR_OUTB_DEL_PICK - Outbound deliveries for picking
Thanks & Regards
JP

Similar Messages

  • Reg: Error in Mail sending through background job in SCOT

    Hello experts,
    I am trying to schedule a background job through SCOT so as to send the mails present in SOST.
    The job is running but it is giving error as "Invalid status  for recipient" in SOST.
    But when I am sending it directly from SOST it is delivered without any errors. The email address is maintained correctly and SMTP settings are also correct as while sending it directly from SOST it reaches the required recipient without any error.
    This error is observed only through background job. I am using program RSCONN01 with variant SAP&CONNECTINT in background job.
    Kindly suggest why I am getting the error "Invalid status  for recipient" in background job.
    Thanks & Regards
    Meraz
    +91 8894522860

    I am getting the exact same issue.
    were you able to fix this in the last 3 weeks?
    thanks.

  • Partial picking and PGI (with Idoc)

    Hello
    a) We have a scenario where we would like to achieve partial picking and PGI with Idoc:
    For example
    In the delivery the delivery qty is 10 from the beginning, but we would like to pick only 7 and perform the PGI anyway. The 3 remaining units should remain open and create a new delivery with VL10 or whatever. For the picking confirmation we are using SHP_OBDLV_CONFIRM_DECENTRAL03. We are not using WM, just inventory management in this scenario.
    We know that per standard SAP functionality the picking quantity must match the delivery quantity when doing the PGI.
    b) However: we have another scenario where we run picking and confirmation from a DWMS, where all confirmations are made by the idoc type SHP_OBDLV_CONFIRM_DECENTRAL03. In this scenario, it is possible to achieve the partial picking and PGI.
    So my questions are really:
    1) Anyone knows why SHP_OBDLV_CONFIRM_DECENTRAL03 would post partial picking PGI with DWMS succesfully, and not with a "normal" scenario where there is no DWMS in use, just a normal plant/storage location?
    2) Anyone knows a suitable idoc type to achieve partial picking idoc, one where the picking qty and the delivery qty could be adjusted at the same time so that picked and delivery quantities would be exactly the same?
    3) Any suitable user exit that could be used in order to change the delivery qty according to what has been picked for the delivery? Some success stories around it would be appreciated.
    Thanks in advance,
    OT

    Hi,
    I am not able to get the details whether you want to know the information about the Inbound Idoc or Outbound Idoc. But you want to do the picking and packing of the delivery then I can presume that you are doing the Inbound process.
    In that case you can do use the process code SDPI which has the message type SDPICK. In this we have the function module SD_IDOC_INPUT_PICKING which can do the picking and PGI of delivery.
    In this you can also change the delivery quantity if you are not picking up the whole quantity from the plant. So it allows you to change the delivery quantity and then do the PGI for the same.
    Regards
    Suneet

  • FM or BAPI for Delivery Order Picking and PGI

    Good day,
    I would like to check with you all on any function module or BAPI which can perform delivery order picking and PGI ?
    I did some research and found that a lot of people is introducing this FM "WS_DELIVERY_UPDATE_2"
    but i'm not sure how this FM works. Can anyone provide some information for me on this function like what data to propagate into this FM and etc... ?

    hi,please check this link.
    Need to update picking,packing and PGI using FM "WS_delivery_update"
    also,
    for picking:  WS_DELIVERY_UPDATE_2
    pgi :  BAPI_GOODSMVT_CREATE
    thanks.

  • Do not get printouts for some custoemrs through background job

    Hi ,
    I am getting the printouts through back ground jobs, suppose what ever the billing documents by end of the day and there is back ground job which runs and give the print outs for that i have maintained in VV31 medium 1 printout and dispatch time 1 periodical scheduled back ground job. Now i want to for some customers i don't want to get the printouts through back ground job.
    Can you please suggest me how to control do not print for some customers.
    Regards
    Venkat

    Hi Sri nath,
    I have one access sequence for the combination sales org/dist channel/billing type and have maintained in vv32  sales org ,dist,billing type for that access sequence and medium is print out and dispatch time is 1 schedule back ground job
    and now i created one more table which is combination of  sales org/billing type/customer and medium is 1 and dispatch time 4 maintained in the vv32.
    what ever the customer i maintained in vv32 for the new combination. after i created sales order and now creating the billing document even though output is triggering first combination which is background job, but i want  to trigger 4 when saved application.
    can you please suggest how to resolve this issue.
    Regards
    Venkat

  • Spool incomplete through background job

    Hi All,
    A spool is being created through a background job which is displaying strangely.
    CONCATENATE text-t01 co_constant v_variable text-t02 INTO v_output.
    CONCATENATE text-t03 text-t04 INTO v_output2.
    WRITE: / v_output1,
                / v_output2.
    In integration system, everything is comign fine. But in production system, only v_variable in v_output is being displayed. None of the text elements are being displayed. We checked the text elements translation and all. Everything is perfect.
    Can anybody suggest on this?
    Thanks!!!

    Hi Srinivas,
    Please check those text elements has transported to the Production server or not
    or else double click on the text element to check that text elements are currently in the production server.
    If not then transport those text elements again and make sure that they are in Production system.
    Regards,
    Md Ziauddin.

  • Report to be generated,mailed based on Reminder date through background job

    Hi All,
    We have a requirement where in I need to mail the "Task Monitoring" report to the Personnel administrator based on the reminder date set for different task types mentioned in IT 0019.
    I am using T-code sm36 to set the background job on a monthly basis.
    I am able to mail the report for as per the reminder dates set in the "Task monitoring" report. But I want to know how the system will pick the reminder date on a monthly basis to mail the report accordingly.
    Eg. For the month of Jan, i have set the reminder dates falling in that very month in the selction output of "Task Monitoring" report and mailed.
    Now I want sytem to automatically pick the reminder dates and mail the report. Pls let me know the steps to make the sytem pick the next reminder dates on its own on monthly basis.
    Points would be rewarded for appropriate solutions.
    Thanks.
    Deepali

    Hi,
    After pressing save button to create a variant, system takes me to the Variant Attributes screen. There I select on "Selection variable" accross "Reminder date". I clcik on the "Dynamic date calculation".
    Then when i go to the "Name of Variable column" and i  select "First day of the month" from the drop down. Can u pls explain me how this would help me capture the "Reminder dates" on monthly basis falling on each month when i mail the report on monthly basis.
    Eg. For the month of Jan, i need all the reminder dates falling in this month.
    For the month of Feb, i need all the reminder dates falling in this month. Like this, It goes on all for all the months.
    Thanks.

  • Automatic Mail not getting generated through background job

    Hi Experts,
    We have set up a job variant with spool recipients. We are getting the automatic mail if the job is getting finished successfully. But we are not getting the automatic mail if the job is in cancelled status. Earlier we used to get the mail even if the job is in cancelled status. We are not sure if there is any setting which would restrict the automatic mail based on the job status.
    Appreciate your help in this regard.
    Thanks and Regards,
    Ranjani.

    Hi,
    Just for a work around, try checking the SAP user inbox for the user who has scheduled the background job.
    I don't there  is any seperate configuration in Spool List Recipient for the canceled jobs. We need to confirm that the email ids provided in the Spool List recipient are correct and the background job creates a spool request even if it is canceled.
    Also if possible try deleting the existing background job and create a new background job with the same parameters and valid email id's maintained in the Spool List recipient.
    OR
    Without deleting the existing background job, parallely create a new background job with the same parameters and valid email id's maintained in the Spool List recipient. If it works then delete the old background job.
    Thanks
    Harish

  • Date and time for background job

    Hi,
    I am creating a program with out selection screen . This program runs based on date and time . so I need to create a table
    with date and time fileds.
    Program runs based on FROM DATE FROM TIME  TO DATE  TO TIME....... FROM DATE and FROM TIME  will get it from ztable and TO DATE & TO TIME values as SY-DATUM & SY-UZEIT. In the end I will update sy-datum and sy-uzeit values in the custom table to get the values ( Use it for from date from time ) for next run of the program.
    This program is mainly used for background job so how do we get the values of from date and from time for the first run of the program ? how do we update the latest date and time details by deleting old date and time details.
    Thanks ,
    Vinay.
    Edited by: Vinay parakala on Apr 22, 2010 9:18 AM

    First of all, I'll suggest to maintain TVARVC instead of doing it in custom table unless you need a complete log.
    As per my understanding, you are trying to fetch some records based on the time period(Delta loads).
    So, you will do an initial run to load the complete data then you will run it for time periods. For example,
    1st Load- 01/01/1991(earliest date possible) - today's date say 03/22/2010
    2nd load- 03/22/2010 - today's date
    so on............
    You have to move the to date values to from date values and to date value needs to be updated by the latest one for each load.
    Do you have any dependency on background job? Please let me know if my understanding is correct or specify your requirement in detail.

  • Picking and PGI

    Any fm for doing picking and PGI

    Hi,
    Try this link
    [Need to update picking,packing and PGI using FM "WS_delivery_update";
    Regards,
    Surinder

  • Picking and Packing through handheld devices in B1

    HI
    The distribution client has already Handheld devices which he wants to integrate to B1. normally in B1 picking list is created and than goes to packing list and than its ready for the dispatch.
    He wants to use those handheld devices when picking those items it reflects in the system that certain items against that picking list have been captured and now can be packed.
    what are technical information is required for this and where wqe can do it.
    kindly reply.

    Sohail,
    There are a few things to consider as your client ventures into this integration project.
    All handheld devices in some way are linked to a base system. First investiagte how the handheld is being currently used.  The data from the handheld should be getting transferred to some base system / base station.  This is the point from where you should plan your integration with SAP B1.
    In SAP, you will need to use the Pick and Pack process in order for this to work right.
    The Pick and Pack process stores information on Orders Released to pick on a table which the information from the handheld cam be used to update as to What has been picked.
    Then the regular process of copying the Picked items to Delivery and Delivey to AR Invoice will happen in SAP B1.
    Suda

  • Shipment of Free Item alongwith Parent Item (STO,Warehouse Picking and PGI)

    Hi Experts,
    In Retail industries Vendor/Company promote offers to customer free items along with Saleable Product so increase footfalls and basket value. In case there is free item with parent item, PO will be created accordingly as free item. Is there any standard method so that for certain period while creating STO/Picking/PGI when we select Parent Item automatically Free Item should be added and picking document contains the free item to pick.

    Hi Vijay
    By changing storage location you could do b'coz the new storage location is not maintained with warehouse, hence no need to perform warehouse transactions (TO creation and confirmation) before inventory mgmt transactions (PGI).
    For trying pick up with WH, first u should have enough stocks in approppriate storage bins and u should perform pick up by creation of TO and confirmation.
    warm regards
    sairam akundi

  • Difference between Batch jobs and background jobs...

    hi APO Gurus ....
    This may sound a very silly question. What is  the exact difference between a batch run and executing a background job ?

    If i understand correctly  your question is  executing a program (for example) in background and running in a batch jobs.  You can execute a program in background while you are online, go to menu program->execute in background and enter print parameter, schedule parameter. System creates and starts job dynamically. You can check in SM37.  Batchjob is you create job using   SM36 (with program and Variant) define run frequency. System automatically run job in specified frequency.  I my experience, technically both are same, system behaves exactly same. One dynamically creates job other one runs on predefined freq.
    Thanks,
    Niranjan

  • Background job not showing full output of Report

    Dear Experts
    we have created zpgm for stad report and try to take output as mail to particular user for future analysis bcaz stad gives only 2 days report only we need keep report for months together so when we run job in foreground it shows proper output but when same thing when we run from background it shows only some part of report in mail (we are unable to get full output through background job )
    we send mail through spool receipts we have created folder and maintain user for getting mails through so15 distribution list
    we need some input to come out of this major issue
    if there is any other workaround let me know
    Regards

    Hello,
    If a job is defined by transaction SM36, the print format parameters will only be taken into account, if they are saved as user specific print parameters of the batch user. If no user specific print format
    is defined,  the ALV standard logic will be processed adjusting the print format to the actual line size of the report.
    For example, the list line size is about 132 characters, the widest available format of the chosen printer will be selected X_65_132.
    The problem would be solved by defining a device type which is no format assigned to print, or by defining user specific print format parameters for the batch user, who creates the jobs in SM36 (see
    SAP note 1179399, item 6).
    Regards,
    David

  • Scheduling of process chain with background job

    Hello All,
                  I have scheduled the process chains through background jobs. I have copied the meta chain and created seven background jobs that is from Monday till sunday. The problem is most frequently the job gets cancelled with the message
    Process CHAIN, variant PAA1_GS001 is not scheduled waiting for event RSPROCESS 44NRPDWZ7CQUJ92ATDTY6368H.
    This is the variant for the next process after the start process. I tried by giving merge active versions, but one day the background job runs fine , but the next day it gets cancelled.
    If anyone has faced this issue before kindly let me know.
    Regards,
    Karthik.

    Hi,
    It seems to be there may be in probelm in Varients, so create a separate Varient for each PC and then activate the PC and execute.
    Thanks
    Reddy

Maybe you are looking for