Picking list generation without Warehouse management
Hi all,
I have requirement for my client to generate picking list genereation without wm. so i assigned EK00 condition type, transmission medium, Language, send time & picking confirmation in shipping point. Also created condition record in VP01SHP tcode but still unable to generate output for picking in VL70.
Please suggest !
Thanks & Regards,
Shakti
Following 2 recently discussed SDN thread will be help to you:
- Re: We use picking option without warehouse management installed
- picking without warehouse management
Regards
JP
Similar Messages
-
Handling unit mangement without Warehouse management
Hello,
We are working on a scenario,wherein we are planning to use handling unit management without warehouse management.Does HU management and WM go hand in hand?
Do you foresee any inconsistencies if HU management is implemented without WM?
What does SAP recommend?
Thanks,
PankajHello,
WM and HU functionality are independent solutions. WM and HU could be implemented based on your business scenarios. It is pretty common to have WM and HU solutions for the business.
It will be sort of difficult to answer about inconsistency in HU solution without WM. Based on what process you define and what are the intricacies involved you may or may not have true inconsistencies.
You could refer to the SAP best practices help library and see if for your business scenario SAP has a solution and that way you could best define an integrated solution.
Hope this helps.
Thanks, -
Pick List Generation Wizard not working
Hi all,
I am trying to generate Pick List but the Pick List Generation Wizard is not picking the items to be released. The items in the sales order are all inventory/sales items. Is there a setting that needs be configured?
A screenshot of the problem is attached.
All help is appreciated.
Regards,
LucasHi,
Please refer SAP note:
1984364 - Unable to see message from SBO_SP_TransactionNotification
when releasing to pick list if bin locations are enabled
Thanks & Regards,
Nagarajan -
Hello ,
In pp-pi i am using backflushing. The backflush of components will be from 'prod location'.
But in COIK t./c system does not show any components.
Is there any seting where even though i have activated backflush, system still does allow me to do picking with COIK.
Any other t/c where i can find the materials to be transfered from main loc to prod. location.
Thanks & Regards
Abhijit S NakhwaDear,
As per standard SAP practice, It is not possible to generate pick list or do manual GI for the components which you are backflusing since system is doing automatic Goods Issue alongwith final confirmation of process / production order.The materials which you need to do manual Goods Issue you must remove backflush tick in material master / routing / process order wherever you have maintained.In short, backflush & pick list both simultaneously cant be used for the for the same material in same order.
Hope this helps clearing your doubt.
Regards,
Tejas -
Hi all
we implement an basic WMS based on ECC6 on out WH. Everithyng was fine for more than a year. Recently i tried to do some changes in purchare order area to create a new document type. I am not sure there is a link between these but when i tried to create a pick slip from outbound, transaction VL06O i got following message:
Storage bin 0080002445 not found (enter storage type).
I rolled back all changes done for PO document type but error still is there.
This is happened in DEV system hence i suspect that some other changes might create this issue. There are no changes around LE
All config for storage type is correct.
Thank you
SilviuTypically, on the outbound TO creation, the system generates a 'dynamic bin' based on the coordinates that refer to the delivery number. The creation is automatic during TO creation. First place to check is the combination of warehouse and warehouse movement type. Ensure the interim storage type (typically, 916) is placed in 'Dest' and 'scr' is marked. Additionally, ensure the 'requirement type' has 'L - Sales document'. This configuration enables automatic generation of the dynamic bin, which is essentially the delivery number. During VL06O (creation of TO) or LT03, system generates this dynamic bin to putaway material in this bin upon TO confirmation.
-
RF guns for MB1B in plant without Warehouse managed.
Hi Folks
Need your input on the below requirement.
We got requirement to do MB1B ( transfer posting sloc to sloc ) using RF guns in the plants , those plants are not WM linked.
If it is not WM linked , can we do it MB1B through RF without assigning in LM00 to create the Material document.
Because if i go to assign it is asking WM number ,since we dont have warehouse we want to do other way.
Please provide your inputs to proceed further.
SelvaHello Selva,
RF Menu in SAP is designed for Warehouse Number so Go ahead and create one Warehouse number, but dont assign it to any plant/Sloc combination. Just create only.
Now you will be able to access LM00 transaction in SAP. so design screens and develope the program for MB1B and assign this program in RF menu. That's how you will be able to use Non WM transaction on scanner.
Regards,
Arif Mansuri -
Standard output type for Delivery picking list
Hi All,
My requirement is to trigger a picking list from the outbound delivery whenever the overall WM status is "B". Probably I need to look at a new requirement routine to add this condition.
Pls tell me what is the standard output type available for delivery picking list. I have analyed "EK00". Looks like this works only for deliveries without warehouse management.
Also we dont have a customization path for "EK00" and it has to be assigned to a shipping point.
Pls confirm if we can use EK00 for deliveries with warehouse management and is it correct?Else what is the other standard output type available for delivery picking list.check ZPCK picking list.
SPRO>Logistics Execution>Shipping>Basic Shipping Functions>Output Control-->Define print parameters shipping
Here available ZPCK condition type.I think this condition record you can use. -
Hi,
I have requirement to track the goods issued to production with reference to the order/pick list. The goods are moved from warehouse to production location using 313 mvt and received at production storage location using 315, Once the consumption recordings are completed and any stock remaining at the production storage location, we need to identify against which order this stock belongs to. WM is implemented for the main store but production store is not part of the WM.
Regards
CheruHi Jatin,
The requirement is to move the stock from main warehouse to the production store. We want to issue the goods against the pick list from main warehouse to production store. The ware house will do the goods issue against the pick list and the production will receive the goods at their storage location. So we could track what goods issued against which pick list. Once the goods are at the production location, consumption will recording will be done against the production order. We do not want to do the goods issue against pick list from the warehouse using mvt 261.
Regards
Cheru -
Hi ALL,
How can we know if the Material is warehouse managed..? The material can be defined to be warehouse managed in Material Master...warehouse mgmt 1 tab...is it rite? ...
If I select the warehouse mgmt tab of material master i get an error saying "Warehouse mgmt 1 is not active for the organisation level." and it asks me to enter warehouse number..So does this error message mean that Material is not Warehouse Managed....?
Now how to make material Warehouse managed in this case...? Also if the material is made warehouse managed then is it possible to make the material without warehouse managed again....? If yes then ...How?
Thanks in advance..
Regards,
Ameya K.Hello Ameya,
<b>How can we know if the Material is warehouse managed..? The material can be defined to be warehouse managed in Material Master...warehouse mgmt 1 tab...is it rite? ...</b>
If material is managed for warehosue then you will be able to see material record in table MLGN (Material Data for Each Warehouse Number). This is for consultant level.
If any user wants to see whether material is managed for any warehouse, then go to MM03 tcode, give the mateiral number and press enter, select the WM view 1 & 2 and press enter, when it comes to organization level press F4 in the WHN field, it it is maintained then it will pull that WHN with X mark.
<b>If I select the warehouse mgmt tab of material master i get an error saying "Warehouse mgmt 1 is not active for the organisation level." and it asks me to enter warehouse number..So does this error message mean that Material is not Warehouse Managed....?</b>
Warehouse is activated for the combination of Plant and Storage Location, so you need to create the warehouse number in Log execution area and assign it with Plant/SLoc combination in Organization assignment.
<b>Now how to make material Warehouse managed in this case...? Also if the material is made warehouse managed then is it possible to make the material without warehouse managed again....? If yes then ...How?</b>
Once you assign warehouse number to plant/Sloc in assignment and you need to complete the other settings related to WH. Then when you do any inventory transaction which is relevent to that Plant/Sloc combination (which is assigned to WH number) then the system will process Warehouse transactions.
If you have carried out some transaction with Warehouse level, it is not advisable to delete material for WM view (MM06), but you need to complete the open transactions and made the inventory zero for that material then only you need to deactivate/delete WM view for that material.
Hope this helps.
Regards
Arif Mansuri -
Cannot see pick list on releasing production order for WH managed material.
Hi guys
I created workcenters, routing, bom, control cycle record and prod. verison for the material before creating the Prod. order. Now, I am neither able to see the Pick List nor Material Staging (Simulation) after releasing my Prod. Order. The exact error is "No WM relevant components exist". All my materials are warehouse managed.
Any help gurus??
Regards,Hi
you are mentiuoning that control cycle .
Have assigned the coponents to the storage location which is assigned to ware house.
pl. chk this.
Regards
YMREDDY -
Pick selection list generation - srs
EBS R12
OS Linux
I am submitted the program "pick selection list generation - srs", by using the fnd_submit API, this is supposed to pick the Sales Order and Release the Sales Order.
Program is getting completed successfully, but is not picking the Sales Order.
Can any body tell me the required setups for using this program.
Regards,
PKHi PK,
Try the following..I think for some last options.
1. Subinventory specified as release criteria, and the order lines do not have a subinventory specified.
2. A specific sales order is entered, and the scheduled ship date or request date ranges are outside the dates specified in the order. For example, order 12345 was entered and booked with scheduled ship date of Nov 1, 2009; and when pick releasing this order, a scheduled ship date range of Oct 1 2009 through October 31 2009 was specified.
3. Shipping warehouse specified on the Pick Release form is not the same as the shipping warehouse specified on the order.
Thanks
-Arif. -
Report for List of Transfer orders in warehouse management
hi,
i want generate a report for list of transfer order orders in warehouse management
is there any report with you guys kindly help me,
or any standard report is there to display list of transfer orders in warehouse management
Thanks,
Rajesh
Edited by: rajesh kumar kandagatla on Feb 11, 2009 9:27 PMHi,
If it is one time requirement, you can run the report LT23 and download the data to excel sheet and donwload material details in another sheet and you can match the temperature column in excel file.
If it is permanent requirement, create a query and attach transaction code to that or write a seperate report for this requirement.
Please let me know.
Thanks
Nagarajan -
Delivery Notes Generation Via Pick List
Am trying to generate delivery notes off pick tickets and i can't find any code example. I now came up with the following code but am having issues when items are in multiple Bin Locations.
Public Sub Sales2Delivery() '(ByVal OrderID As String)
Dim OrderID As String = ""
Try
Using connection As New SqlConnection(StaginConn)
'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y';", connection)
connection.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
' Call Read before accessing data.
While reader.Read()
Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
Dim orders As Documents = BusinessOrders
orders.GetByKey(Convert.ToInt32(reader(0)))
OrderID = Convert.ToString(reader(1))
Dim Delivery As Documents = BusinessDelivery
Delivery.CardCode = orders.CardCode
Delivery.CardName = orders.CardName
Delivery.NumAtCard = orders.NumAtCard
'Delivery.DocNum = orders.DocNum
Delivery.HandWritten = BoYesNoEnum.tNO
Delivery.Series = 8
Delivery.DocDate = DateTime.Today
Delivery.DocDueDate = DateTime.Today
Delivery.TaxDate = DateTime.Today
Delivery.Address = orders.Address
Delivery.Address2 = orders.Address2
Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
Delivery.DocCurrency = orders.DocCurrency
Delivery.DocDueDate = orders.DocDueDate
Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
Delivery.ShipToCode = orders.ShipToCode
Dim lines As Document_Lines = orders.Lines
'If (count > 0) Then
' lines.Add()
' lines.SetCurrentLine((lines.Count - 1))
'End If
Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
oPickList.GetByKey(orders.Lines.PickListIdNumber)
For i As Int32 = 0 To (lines.Count - 1)
If i > 0 Then
Delivery.Lines.Add()
Delivery.Lines.SetCurrentLine(i)
End If
' Set the Current Lines on the order
orders.Lines.SetCurrentLine(i)
Try
oPickList.Lines.SetCurrentLine(i)
Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
Delivery.Lines.BinAllocations.BinAbsEntry = oPickList.Lines.BinAllocations.BinAbsEntry
Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
While (rs.EoF <> True)
Delivery.Lines.ItemCode = rs.Fields.Item(0).Value.ToString 'orders.Lines.ItemCode
Delivery.Lines.UnitPrice = CType(rs.Fields.Item(1).Value.ToString, Double) 'orders.Lines.UnitPrice
Delivery.Lines.ItemDescription = rs.Fields.Item(2).Value.ToString 'orders.Lines.ItemDescription
rs.MoveNext()
End While
rs = Nothing
Catch ex As Exception
Continue For
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End Try
Next
If Delivery.Add() <> 0 Then
ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
Else
ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
End If
orders = Nothing
Delivery = Nothing
BusinessOrders = Nothing
BusinessDelivery = Nothing
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End While
'orders = Nothing
'BusinessOrders = Nothing
End Using
Catch ex As Exception
ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
Finally
If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
Else
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
End If
End Try
End Sub
The Error message am getting is 1470000368 - The quantity allocated to bin locations must be positive.Am getting this error now is
"1470000341 - Fully allocate item "1017494" to bin locations in warehouse "Isolo". Issue is we have items in multiple Bin locations and the items have been picked via the pick ticket. Is it also possible to generate the delivery note off the Pick List.
The new code am using is
Public Sub Sales2Delivery() '(ByVal OrderID As String)
Dim OrderID As String = ""
Try
Using connection As New SqlConnection(StaginConn)
'Dim command As New SqlCommand("SELECT DocEntry from ORDR with (nolock) WHERE NumAtCard = '" & OrderID & "'", connection)
Dim command As New SqlCommand("SET DATEFORMAT DMY; select distinct top 5 o.DocEntry, o.NumAtCard from ordr O with (nolock) join RDR1 R with (nolock) on R.DocEntry = O.DocEntry join OPKL P with (nolock) on P.AbsEntry = R.PickIdNo where u_shipstate = 'Delivered' and CAST(O.docdate as date) >= '30/04/2014' and P.Status = 'Y' and o.DocStatus = 'O';", connection)
connection.Open()
Dim reader As SqlDataReader = command.ExecuteReader()
' Call Read before accessing data.
While reader.Read()
Dim BusinessOrders As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oOrders), Documents)
Dim BusinessDelivery As Documents = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oDeliveryNotes), Documents)
Dim orders As Documents = BusinessOrders
orders.GetByKey(Convert.ToInt32(reader(0)))
OrderID = Convert.ToString(reader(1))
Dim Delivery As Documents = BusinessDelivery
Delivery.CardCode = orders.CardCode
Delivery.CardName = orders.CardName
Delivery.NumAtCard = orders.NumAtCard
'Delivery.DocNum = orders.DocNum
Delivery.HandWritten = BoYesNoEnum.tNO
'Delivery.Series = 8
Delivery.DocDate = DateTime.Today
Delivery.DocDueDate = DateTime.Today
Delivery.TaxDate = DateTime.Today
Delivery.Address = orders.Address
Delivery.Address2 = orders.Address2
Delivery.Comments = "Based on Sales Order #" + orders.NumAtCard & "."
Delivery.DocCurrency = orders.DocCurrency
Delivery.DocDueDate = orders.DocDueDate
Delivery.DocObjectCode = SAPbobsCOM.BoObjectTypes.oDeliveryNotes
Delivery.ShipToCode = orders.ShipToCode
Dim lines As Document_Lines = orders.Lines
'If (count > 0) Then
' lines.Add()
' lines.SetCurrentLine((lines.Count - 1))
'End If
Dim oPickList As PickLists = DirectCast(vCompany.GetBusinessObject(BoObjectTypes.oPickLists), PickLists)
oPickList.GetByKey(orders.Lines.PickListIdNumber)
For i As Int32 = 0 To (lines.Count - 1)
If i > 0 Then
Delivery.Lines.Add()
Delivery.Lines.SetCurrentLine(i)
End If
' Set the Current Lines on the order
orders.Lines.SetCurrentLine(i)
Try
oPickList.Lines.SetCurrentLine(i)
Delivery.Lines.BaseEntry = oPickList.Lines.OrderEntry
Delivery.Lines.BaseLine = oPickList.Lines.OrderRowID
Delivery.Lines.Quantity = oPickList.Lines.PickedQuantity
Delivery.Lines.BaseType = DirectCast(SAPbobsCOM.BoObjectTypes.oOrders, Integer)
'Dim rs As SAPbobsCOM.Recordset = vCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.BoRecordset)
'rs.DoQuery("select itemcode, price, dscription from RDR1 R where R.LineNum = " & oPickList.Lines.OrderRowID & " and R.PickIdNo = " & oPickList.Lines.AbsoluteEntry)
'While (rs.EoF <> True)
Delivery.Lines.ItemCode = orders.Lines.ItemCode
Delivery.Lines.UnitPrice = orders.Lines.UnitPrice
Delivery.Lines.ItemDescription = orders.Lines.ItemDescription
' rs.MoveNext()
' End While
'rs = Nothing
Catch ex As Exception
Continue For
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End Try
Next
If Delivery.Add() <> 0 Then
ErrDetails.AppendLine(" Unable to create Delivery note for Order: " & OrderID & " <br /> " & vCompany.GetLastErrorCode() & ":" & vCompany.GetLastErrorDescription())
Else
ErrDetails.AppendLine("Successfully created Delivery note for Order:" & OrderID) ' & " as requested by " & UserEmail & ".")
End If
orders = Nothing
Delivery = Nothing
BusinessOrders = Nothing
BusinessDelivery = Nothing
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
End While
'orders = Nothing
'BusinessOrders = Nothing
End Using
Catch ex As Exception
ErrDetails.AppendLine(" Error generating Delivery note for Order: " & OrderID & " <br /> " & ex.ToString())
My.Computer.FileSystem.WriteAllText(_LogPath, ErrDetails.ToString, True)
Finally
If Not String.IsNullOrWhiteSpace(ErrDetails.ToString) Then
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Errors encountered while registering data on " & System.DateTime.Now.ToString("F") & ".Errors:" & ChrW(13) & ChrW(10) & Me.ErrDetails.ToString), True)
Else
My.Computer.FileSystem.WriteAllText(_LogPath, (ChrW(13) & ChrW(10) & ChrW(13) & ChrW(10) & "Application Ran successfully on " & System.DateTime.Now.ToString("F") & "."), True)
End If
End Try
End Sub -
Problem in generation of Picking list
Hi friends,
The scenario: Picking list is printed as soon as the delivery is saved. The program and layout are working fine.
Example: let a delivery is being saved with reference to a sales order with only one line item ( for simplicity), and let the quantity to be delivered that is delivery quantity (LIPSD-G_LFIMG, on screen) be 2, now there are three cases:
1. before saving the delivery if NO Picking quantity (LIPSD-PIKMG, on screen) is entered, The picking list is printed, here the field VBUP-KOSTA (picking status field) is having value 'A', and field VBUK-KOSTK(Overall Picking status)is also having value 'A', and the picking list is printed.
2. before saving the delivery if Picking quantity (LIPSD-PIKMG, on screen) is entered as 1, the field VBUP-KOSTA (picking status field) is having value 'B', and field VBUK-KOSTK( Overall Picking status) is also having value 'B', and the picking list is printed.
3. before saving the delivery if Picking quantity (LIPSD-PIKMG, on screen) is entered as 2, the field VBUP-KOSTA (picking status field) is having value 'C', and field VBUK-KOSTK( Overall Picking status) is also having value 'C', and the picking list is NOT printed.
I think the check is only done on VBUK-KOSTK for the picking list print, as in case 3, i changed the value of VBUK-KOSTK back to 'A' by using the user exit USEREXIT_SET_STATUS_VBUK in include LV45P079 as a result of which the picking list was printed, but it also stored the VBUK-KOSTK value as 'A' in the database table which is undesirable, as it should be saved with its earlier value, before it was explicitly made 'A'.
So, my requirement is to Print the picking list, even if the delivery quantity and picking quantity is same for any number of line items.
How can i solve this problem?? Speedy help requested.
thanks,
Sharon.Hi Sharon,
Looks like you need this pick list no matter what the status of the document is and what the picking relevancy is. Why don't you create an output type that is assigned to the document all the time and then create this form as it is. If you are trying to use the standard output type and standard form and standard routine, then system is going to behave the standard way, that is to create a pick list when it is relevant for picking and only if the status is not complete. The system logic is that a pick list is supposed to tell your warehouse as to what needs to be picked and if there is nothing to be picked or if the item not relevant for the picking then it doesn't need to be there on this list.
So if you want a list similar to the pick list, have the logic replicated minus the pre-conditions about picking status etc, have the form copied and then create and assign it to a new output type.
Regards,
Srinivas -
System variable for Warehouse name in Pick list PLD
Hi Experts,
My customer would like to show the Warehouse name on the Pick List print layout.
What is the System Variable to display the Warehouse name on the Pick List?. Iu2019m working with Sap Business One 2007A.. Where can I find the system variables for Chile localization. Thanks Very Much
ClaudiaHi Claudio,
Try this,
->> Open the Pick List(System) PLD and Save as the New PLD.
->> Open the NEw PLD and Create 1 Database Field(for WareHouse Name) in Repetetive Area.
Table -> OWHS - WareHouse
Column -> WhsName - WareHouse Name
Save as and Run the Print Preview.
IF will not print the WareHouse Name in Print.
Do this in PLD.
->> Open your PLD.
--> Ralate to WareHouse Code Field ID in WareHouse Name Field at Content Tab on Properties Window.
Regards,
Madhan.
Maybe you are looking for
-
How to create a "text with photos" book in Elements 8?
Hello all! I am new to APE and this forum; I've been reading about it (APE 7, for the most part - right now I'm reading "The Missing Manual" for version 7), and have pre-ordered version 8. I have published many books in the past on lulu.com, but none
-
Accessing Java Classes from Forms
Is is possible to access a Java class from Forms? I have been creating an Active X control that returns a Java object, and from that I can call methods on that object, but I would really like to do that without having and Active X control in the mix.
-
Microsoft ODBC for Oracle on a Windows 7 64Bit OS and Oracle 11g Client
Hi, I have installed Oracle 11g client 64Bit edition on a Windows 7 Professional 64Bit OS. Trying to connect to Oracle DB through ODBC Driver I get the following Message: Microsoft ODBC for Oracle: "The Oracle(tm) client and networking components wer
-
Succession planning the Evaluation path
What evaluation path is used for Succession planning to determine the structure, IN OC we know it is standard delivered MSS_OCI_MIN
-
can anyone help me?? i have problem in displaying ico images in java, i want to view it in a lbel, is it posdble?? any idea?? thanks