Picking location determination in delivery

Hi All,
Sorry if I am posting this question in wrong forum.
I have configured the picking location using shipping point, plant and shipping condition.
But when delivery is created the picking location is ignored which is configured. But when storage location is specified in sales order, the storage location is getting copied into delivery.
The reason being our business process the material exists in 2 Storage locs . One is used for availability check and the other storage location we use to do TF posting and also do the PGI from there.
Please help.
Thanks
John Cusack

Dear John,
First of all picking location is determined based on shipping pointplant strorage condition.
And you can assign only one storage location.If you want another Storage location change it in the delivery doc.
Storage condition is assigned in the material master >plant data/ stro loc tab page.
Hope this helps
Thanks
Murtuza

Similar Messages

SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY

i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.

Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha

Picking location determination for STO

Hello All,
Please i need help for the scenario described below:
Material X exists on storage location 1234 and 5678 in Plant 1000. Also, this material can be transported to other Plants from any of this storage location. Currently, I have configured the picking location based on Plant/Shipping point/Storage condition, and only storage location 1234 is determined.
Is there a way i could configure the the 2 storage locations as picking locations at different point in time.
Urgent help needed.

Hi, Try to use below functionality,
You can go to Logistics Execution -> Shipping -> Picking -> Determine Picking Location -> Define Situations, you can use the standard one,
After that maintain this situation for determination of Storage Location with combination of Situation, Stor. condition, Stor. Location through,
Logistics Execution -> Shipping -> Picking -> Determine Picking Location -> Storage Location Determination with Situation

Picking Location Determination with Situation

Dear all,
I have configured my Picking/Storage Location Determination:
/Transaction nolml / shipping / picking / determine picking location / storage location determination with situation.
Sitution: 21 (remove from stock standard),Storage Condition: nothing, SLoc: my SLoc How/ where do I use situation 21? Situation is part of what?
thanks much.
Nick

check in MM , mrp

Picking Location Determination

Hi,
we are getting error in determination of the picking storage location, while posting GR against Repair Request.
Each Plant has two Slocs & one Shipping point
Eg. Plant - 1100, Slocs 1) SDEL 2)RDEL , Shipping Point - SDEL
the default has been defined for SDEL - 1100 - SDEL.
Return Repair Request is created with the Shipping Point - SDEL & Sloc - RDEL.
while posting PGR with VRRE, the Sloc determined is SDEL instead of RDEL.
However, when we create the Sales Document for Sales Return, the same combination of SDEL & RDEL works perfectly well.
Delivery Type is same for Return Repair Request & Sales Return.
However, the Item Category is different for both. But i am not sure whether this matters.
need some help on this.
Thnx & Regards,
Sujata

Hi Sujata,
Please check with the enhancement for - Control in Copy control from Order to delivery.
For a user exit to default the storage location at line item level in sales order which gets copied to the delivery. (SOURCE_DETERMINATION user exit FORM USEREXIT_SOURCE_DETERMINATION in program MV45AFZB ).
This will help you to carry the item level data which you have entered manually to sequent documents.
Regards,
Ashish S.

Storage location determination in delivery

Hi,
    In sales order for each line Item (Material) I have only one quantity.
Which is store into the one plant (e.g. CJ01) at any one of the storage location (e.g. suppose there is JL01, JL02, JL03 storage location & my material store into one of the storage location at a time).
But my requirement is that When I am creating Delivery that time appropriate Storage location in which material stored comes automatically into the picking .
Can it is possible?
If yes then What setting I have to configure to do that?
Please help me
thank you

Thank you
Actually for my one Plant there is several storage location .
E.g. STL1
       STL2
       STL3
& In this Scenario For each material only one quantity.
So
at a time only one storage location it is available.
My requirement is that when I am creating delivery s/m should pick up right storage location (in which material available) automatically in picking tab   .
please help me

User exit for storage location determination in sales order

Hi SAP SD Experts,
Please give me the exact user exit name where we can use for the automatic storage location determination in the sales order.
Thanks & Regards,
Rajesh Kumar Raju,

Dear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi

Storage location-determination of return-deliveries (delivery type RL)

Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.

This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
The questions is why/ and is there an OSS note.

Automatic storage location determination based on delivery document type

Dear All,
How can automatic storage location will be determined based on sales order type or delivery type.
Ex: If the business sells the material storage location automatically determined as SL12.
If the customer returnns the material storage location should be SL01.
Please suggest for retun process automatic storage location determination.
Best regards,
Ramesh

Dear Guru Lakshmipathy,
Fine, but we have some picking rules are MALA, RETA and MARE.
Currently we have onle on plant 1010 and shipping point 1010.
storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
can we use RETA or MARE to determine the storage location for returns delivery. If yes kindly
explain. And where is storage condtion available in sap.
Best regards,
Thanks

BATCH SPLIT AUTOMATIC STORAGE LOCATION AND WEIGHT DETERMINATION IN DELIVERY

DEAR,
PLZ SUGGEST ME HOW TO DO CONFIGURATION IN BATCH DETERMINATION SUCH THAT WHILE DOING BATCH SPLIT WHEN I PUT THE BATCHES MANUALLY THE STORAGE LOCATION AND ITS SPECIFIC WEIGHT WILL COME AUTOMATICALLY .
REGARDS,
DEBESH TRIPATHY

Hi ,
You have to use the user exit as mentioned by lakshmipathi above and take the help of ababer to modify it.
V02V0002 - User exit for storage location determination
Also go through this link for user exit for delivery
http://www.sap-img.com/abap/list-of-user-exit-related-to-vl01n.htm
Regards,
Krishna O

Batch determination during delivery and Picking

Hi,
Please let me know how to meet the below requirement.
During delivery creation for sales order automattically through the program RVV50R10C, The system should do the batch determination automatically for the delivered qty and the picked quantity should be filled auotomatically same as the delivered qty.
I have maintained condition record for batch determination for the combination of Shipping point, Sales document type and Material type and also automatic batch determination for delivery item categories is activated in customization ( the check box for delivery item category is ticked).
With the above setting manual batch determination is working in delivery. but not the automatic batch determination and also the picked qty is not filled.
Regards,
Prasad

Hi Sats,
1. The respective item cat. has been checked in Automatic Batch Determination for Delivery Item cat. u2013 Transaction V/CL - maintained
2. Configured it correctly in transaction V/C5 where you configured the search procedure for batches in the sales docs with respect to the sales area and sales doc type which you are using -maintained
3. Check if shelf life expiration date needed. If yes check in transaction CL03 with the class type 023 - Class maintained in the material master
4. Make sure the batch management check box has been ticked for the materials which you want automatic batch determination to be done in MM03 u2013 Sales: General/Plant tab, Purchasing and warehouse management tab. - The batch management indicator is set
5. Open your delivery in VL03n u2013 check the batch determination display. Select the strategy analysis and check. it gives you information whether the condition types were successfully taken into consideration. If not check in VCH3 - Condition record has been specified.
Manual batch determination works ( select the line item in delivery > Batch split> Batch determination )but not the automatic batch determination.
Regards,
Prasad

Storage location determination.

Hi,
I have one plant. and two stroage locations.In sto.loc 1 the total quantity is 100 and in sto.loc2 the total quantity is 50. so total quantity in the plant is 150.
While iam creating the sales order for 120 quantity the system is confirming the quantity. While doing the delivery the system automatically picks the sto.loc2 and shows delivery quantity as 50.
my question is why it is showing the Sto.loc2 instead of sto.loc1.
please give me the reason.
regards,
vas.v.s.

Hi,
Storage location in Delivey is either Determine from MRP2 View Prod strorage location field ( If there is no Rule assign to delivry type for determining storage location )
Generally if u go to Delivery type u will see a field name Rule to determine storage location for EG MALA ( This rule determine storage location as Shipping point + Plant = Storage location)
If this rule is there then it will take preceedence over Material master .
To see this rule and assignmnet
Goto ->spro -> Logistic execution ->picking ->Detemine picking location .
Hope this clarifies a bit

Storage location determination at Sales Order

Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
Chakradhara

Being an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi

Shipping point and storage location determination

for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obd

Hi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja

Multiple Picking location for a Shipping point

Hi,
Is it possible to assign mutiple picking location against a shipping point in one plant.
Currently we can assign only one storage location as picking location against a shipping point in the below bath
SPRO->LE->Shipping->Picking->Determine picking location->Assign picking location
I have mutiple storage location for a single shipping point. I want system to check any one of the storage location while creating delivery for that particular shipping point.
Eg:
Plant P1 have storage locations S1,S2,S3,S4 & shipping Point SH1,SH2.
System has to determine picking location as S1 or S2 for shippint point SH1.
Is it possible to control this by any userexit or anyother way?
This has to be applicable for STO/PO also.
Thanks

Hello,
there is user-exit:
"Determinations in the Delivery
You can use the following enhancements to control determination of the organizational units that control the picking or putaway process of deliveries:
Enhancement Function influenced
V02V0002 Storage location determination
V02V0003 Gate and staging zone determination (Header)
V02V0004 Staging zone determination (item)"
SPRO: Logistics Execution>Shipping>System Modifications-->Previous User Exits in Shipping
Line: -
You can also use Business Add-In for Delivery Processing:
Business Add-In for Delivery Processing
Use
Application component: LE-SHP-DL
You can use the Business Add-In LE_SHP_DELIVERY_PROC to influence processing of delivery data, during creation and changing of deliveries at specific points described in the interface. The BAdI methods enable you to read, write, determine, delete, and save your own delivery-related data, and to change the standard delivery data.
SPRO: Logistics Execution>Shipping>System Modifications-->Business Add-Ins in Shipping
-->Business Add-In for Delivery Processing
Andrzej

Picking location determination in delivery

Similar Messages

Maybe you are looking for