Picking Location Determination
Hi,
we are getting error in determination of the picking storage location, while posting GR against Repair Request.
Each Plant has two Slocs & one Shipping point
Eg. Plant - 1100, Slocs 1) SDEL 2)RDEL , Shipping Point - SDEL
the default has been defined for SDEL - 1100 - SDEL.
Return Repair Request is created with the Shipping Point - SDEL & Sloc - RDEL.
while posting PGR with VRRE, the Sloc determined is SDEL instead of RDEL.
However, when we create the Sales Document for Sales Return, the same combination of SDEL & RDEL works perfectly well.
Delivery Type is same for Return Repair Request & Sales Return.
However, the Item Category is different for both. But i am not sure whether this matters.
need some help on this.
Thnx & Regards,
Sujata
Hi Sujata,
Please check with the enhancement for - Control in Copy control from Order to delivery.
For a user exit to default the storage location at line item level in sales order which gets copied to the delivery. (SOURCE_DETERMINATION user exit FORM USEREXIT_SOURCE_DETERMINATION in program MV45AFZB ).
This will help you to carry the item level data which you have entered manually to sequent documents.
Regards,
Ashish S.
Similar Messages
-
Picking location determination in delivery
Hi All,
Sorry if I am posting this question in wrong forum.
I have configured the picking location using shipping point, plant and shipping condition.
But when delivery is created the picking location is ignored which is configured. But when storage location is specified in sales order, the storage location is getting copied into delivery.
The reason being our business process the material exists in 2 Storage locs . One is used for availability check and the other storage location we use to do TF posting and also do the PGI from there.
Please help.
Thanks
John CusackDear John,
First of all picking location is determined based on shipping pointplant strorage condition.
And you can assign only one storage location.If you want another Storage location change it in the delivery doc.
Storage condition is assigned in the material master >plant data/ stro loc tab page.
Hope this helps
Thanks
Murtuza -
Picking location determination for STO
Hello All,
Please i need help for the scenario described below:
Material X exists on storage location 1234 and 5678 in Plant 1000. Also, this material can be transported to other Plants from any of this storage location. Currently, I have configured the picking location based on Plant/Shipping point/Storage condition, and only storage location 1234 is determined.
Is there a way i could configure the the 2 storage locations as picking locations at different point in time.
Urgent help needed.Hi, Try to use below functionality,
You can go to Logistics Execution -> Shipping -> Picking -> Determine Picking Location -> Define Situations, you can use the standard one,
After that maintain this situation for determination of Storage Location with combination of Situation, Stor. condition, Stor. Location through,
Logistics Execution -> Shipping -> Picking -> Determine Picking Location -> Storage Location Determination with Situation -
Picking Location Determination with Situation
Dear all,
I have configured my Picking/Storage Location Determination:
/Transaction nolml / shipping / picking / determine picking location / storage location determination with situation.
Sitution: 21 (remove from stock standard),Storage Condition: nothing, SLoc: my SLoc How/ where do I use situation 21? Situation is part of what?
thanks much.
Nickcheck in MM , mrp
-
User exit for storage location determination in sales order
Hi SAP SD Experts,
Please give me the exact user exit name where we can use for the automatic storage location determination in the sales order.
Thanks & Regards,
Rajesh Kumar Raju,Dear Rajesh Kumar Raju
Go to IMG-->Logistics Execution >Shipping> Picking -->Determine Picking Location -->Define Rules for Picking Location Determination. There you have to assign the MALA rule to your delivery type
Also maintain in OMJ8 and in material master under MRP2 view the default storage location in the field "Prod. stor. location"
thanks
G. Lakshmipathi -
Storage location determination.
Hi,
I have one plant. and two stroage locations.In sto.loc 1 the total quantity is 100 and in sto.loc2 the total quantity is 50. so total quantity in the plant is 150.
While iam creating the sales order for 120 quantity the system is confirming the quantity. While doing the delivery the system automatically picks the sto.loc2 and shows delivery quantity as 50.
my question is why it is showing the Sto.loc2 instead of sto.loc1.
please give me the reason.
regards,
vas.v.s.Hi,
Storage location in Delivey is either Determine from MRP2 View Prod strorage location field ( If there is no Rule assign to delivry type for determining storage location )
Generally if u go to Delivery type u will see a field name Rule to determine storage location for EG MALA ( This rule determine storage location as Shipping point + Plant = Storage location)
If this rule is there then it will take preceedence over Material master .
To see this rule and assignmnet
Goto ->spro -> Logistic execution ->picking ->Detemine picking location .
Hope this clarifies a bit -
Storage location determination at Sales Order
Dear All,
Could we storage location determine at sales order level ?
As per my requirement. Stock is available a particular plant example below
Plant
Storage Loc
Stock Available
Batch
1305
1300
10
1000190
1305
1300
10
1000890
Got order from customer is 15 Quantities and the sale order is confirmed because stock is available but at the time of delivery storage location is determined on the particular material so batch is picked automatically on base quantity other other is showing open. So could u plz give me solution for storage location determination on sales order level.
Thank You!
ChakradharaBeing an old member of the forum, I dont want to highlight the importance of adhering to forum rules. This topic has been discussed many times here and if you search in SCN or Google it, you would accept this has been discussed many times. Please adhere to forum rules and avoid posting such repeated queries.
G. Lakshmipathi -
Shipping point and storage location determination
for one of my delivery type i had defined shipping point determination as per following.
define shipping conditions
define loading group
assign shipping points: with combination of shipping conditionsloading groupplantprop shippping pointmanual shiping point.
i also checked the cmr and mmr both are correct.still system is not proposing shipping point and storage locatgion in my obdHi Charan
Shipping conditions is taken from sold to party
Pls check whether you are using a different SP and SH
Check in these t codes
In OVL2 are you seeing the shipping pt determination for your combination?
In OVL3 are you seeing the storage location determination for your combination?
If yes then shipping pt will be definately picked up in sales order
Storage location will be definately picked up in the delivery if you have assigned the rule MALA in OVLK
Have you assigned your delivering plant to your shipping pt in enterprise structure assignment?
This also check
Refresh the whole order and try again
If need be log out of SAP and relog and see provided you have youR OVL2 and OVL3 correct?
Note If shipping conditions are assigned to your order type in VOV8 then that will have priority over the shipping conditions of SP
So for that combination you should maintain shipping pt in OVL2
Regards
Raja -
Storage location-determination of return-deliveries (delivery type RL)
Is there a difference between picking storage location-determination of return-deliveries (delivery type u201CRL Returns (pur.ord.)u201D/return to vendor) on 4.6C compared to ECC6.0? Is there a SAP-note?
Within 4.6C-system the storage location is determined based on the customizing settings (Logistics Execution \ Shipping \ Picking \ Determine Picking Location \Assign Picking Locations).
Within ECC6.0-system the storage location in the return-delivery is always the storage location that is entered in the Return-Purchase Order. It seems like the customizing-settings are no longer beeing taken into account.This storace location-determination of return-deliveries (delivery type RL) in customozing that you mention is only true within the 4.6C-system. Within the ECC6.0-system the storage lcoation is always the one that is entered in the return-purchase order. In ECC6.0 the customizing settings you are refering to a no longer valid for deliveries with delivery type RL.
The questions is why/ and is there an OSS note. -
Multiple Picking location for a Shipping point
Hi,
Is it possible to assign mutiple picking location against a shipping point in one plant.
Currently we can assign only one storage location as picking location against a shipping point in the below bath
SPRO->LE->Shipping->Picking->Determine picking location->Assign picking location
I have mutiple storage location for a single shipping point. I want system to check any one of the storage location while creating delivery for that particular shipping point.
Eg:
Plant P1 have storage locations S1,S2,S3,S4 & shipping Point SH1,SH2.
System has to determine picking location as S1 or S2 for shippint point SH1.
Is it possible to control this by any userexit or anyother way?
This has to be applicable for STO/PO also.
ThanksHello,
there is user-exit:
"Determinations in the Delivery
You can use the following enhancements to control determination of the organizational units that control the picking or putaway process of deliveries:
Enhancement Function influenced
V02V0002 Storage location determination
V02V0003 Gate and staging zone determination (Header)
V02V0004 Staging zone determination (item)"
SPRO: Logistics Execution>Shipping>System Modifications-->Previous User Exits in Shipping
Line: -
You can also use Business Add-In for Delivery Processing:
Business Add-In for Delivery Processing
Use
Application component: LE-SHP-DL
You can use the Business Add-In LE_SHP_DELIVERY_PROC to influence processing of delivery data, during creation and changing of deliveries at specific points described in the interface. The BAdI methods enable you to read, write, determine, delete, and save your own delivery-related data, and to change the standard delivery data.
SPRO: Logistics Execution>Shipping>System Modifications-->Business Add-Ins in Shipping
-->Business Add-In for Delivery Processing
Andrzej -
Situation in Storage Location Determination
Hai,
I have a scenario where I have to determine a different storage location based on the sales doc type. On searching the forum here I learnt that I should use USER EXIT to achieve this.
I want to know whether I can use situations to handle this scenario.
I am able to define situations. But where can I assign these situations? In SO or Delivery document?
Will be thankful if anybody helps me out in this issue regarding the 'situation'
Regards,
Maheshwaran. IHi
Storage Locations are Determined in the delivery document based on The priority rules like MALA or RETA or MARE
Here the RETA rule is Storage Location Determination determination based on shipping pt + delivering plant and Situation
The difference between MALA and RETA is these two are same (shipping pt + delivering plant)
MALA uses storage conditions as the third factor
RETA uses situation as the third factor
RETA is used in trading scenario
But both of these are used or assigned to delivery types only via t code OVLQ
So using situation will not help you to Determine Storage Location in sales doc type
Storage location is normally not determined in sales order
It is determined only in delivery
If you want storage location to be determined for sales order then you have to use user exit
If storage location is specified manually in sales order then it is copied into delivery
Otherwise it is determined using either MALA,RETA or MARE rules which we specify in delivery doc type
For sales order you have to use usetr exit in program MV45AFZZ
To determine storage location in Sale Order, there is no configuration available and it has to be achieved using exit USEREXIT_SOURCE_DETERMINATION in program MV45AFZB.
Maintain a zee table with the values based on which you want the storage location determination to happen. In the exit ask your abaper to write the code to pick up the relevant records based on the criterion and then fetch the storage location. This way storage location will be automatically populated in the sale order.
You can try incompletion procedure option
Put the storage location field in the sales order item incompletion procedure
Regards
Raja -
Automatic storage location determination based on delivery document type
Dear All,
How can automatic storage location will be determined based on sales order type or delivery type.
Ex: If the business sells the material storage location automatically determined as SL12.
If the customer returnns the material storage location should be SL01.
Please suggest for retun process automatic storage location determination.
Best regards,
RameshDear Guru Lakshmipathy,
Fine, but we have some picking rules are MALA, RETA and MARE.
Currently we have onle on plant 1010 and shipping point 1010.
storage location for outbound deliveries determined based on MALA rule has been assigned to LF.
can we use RETA or MARE to determine the storage location for returns delivery. If yes kindly
explain. And where is storage condtion available in sap.
Best regards,
Thanks -
Situation in Storage Location Determination with Situation?
where can I use the situation values to determine the Storage Location?
In other words, how can I determine the Storage Location with the settings in Storage Location Determination with Situation?Dear Huanzhiyu,
Go through this IMG path you can able to define the situations as well as you can able to determine the storage location with the situation.
IMG>Logistics Execution>Shipping>Picking>determine picking location-->Define situations and Storage location determination with situation.
I hope it will help you
Regards,
Murali. -
Plant and Storage Location determination at Item level during Copy control
Hello Freinds,
We are experiencing issues within Sales Order creation when the line item is referencing a contract. The plant and storage location is being determined from the contract - this should not be done, we have an enhancement in place for sales order plant/storage location determination which is how these values should be determined.
Kindly suggest, if it can be achieved through configuration setting at Copy control level, to avoid the Plant and Storage location determination from Contract in to Sales Order.
Thanks,
Anup BansalHello
You can mention the additional logic of redetermining Plant and storage location whenever copied from contract.
In a sale order, i think you are maintaining a enhancement in prog MV45AFZB & user exit userexit_source_determination.
YOu can maintain the coding at same place.
thank you
Anirudh -
SHIPPING POINT AND STORAGE LOCATION DETERMINATION IN DELIVERY
i made configuration setting for shipping point and storage location determination during delivery process. still system is not proposing this data during delivery.
due to this reason lot of time is consuming during delivery creation.
plz suggest the complete configuration flow for this determination.Dear Ram,
Can you please specify the configuration that you have made? And which storage location determination rule are you using for your Delivery Type?
Regards,
Amitabha
Maybe you are looking for
-
How can I get a picture to go with my email signature when sending emails from my iPad? Only a square box shows up on my signature not the actual picture I iploaded in my settings.
-
Exporting - what settings should I use?
I am wanting to send pictures to a publishing / printing company who will use them for prints which they will sell to their customers. I use Lightroom 4.1. I would appreciate some advice about the settings I should use in the Export window. Question1
-
Airport Extreme - PPPoE switches automatically to Ethernet connection
Most of the time I use Airport Extreme using only the cables, w/ wireless off in the weekdays. Connection to the internet is via PPPoE and the pop-up value of the "Connect Using" ACTIVATING WIRELESS when creating a wireless network the pop-up of the
-
HTTPIO_PG_MI_ERROR with error code 102:CLIENT_SEND_FAILED
Hi Experts , I was getting HTTPIO_PG_MI_ERROR with the error test showing Error WHILE SENDING BY HTTP with Error code showing like 102 in the R/3 system , and the interface is synchronous mode. Please help me .. Thnks in Advance.
-
Not the upper right the center one when you click on new tab