Picking of the varient pricing in scheduling agreement

Hello Gurus
goodmorning
i have a small query i.e when i'm using OR as a document type for my sales order its picking the varient price and all are going fine but when i'm trying to do same for scheduling agreement DS in my sales order its not picking the varient pricing plz help me out wat could be the reason.
in advance thank you
venkat
Edited by: K.Venkata Chalapathi on Jan 30, 2009 9:10 AM

Dear Venkat,
Price will get determine in the sales order based on two settings
1.Pricing procedure determination
2.Condition record maintanence.
This may happen for two reasons
1.Different pricing procedures are getting determined for sales order and scheduling agreement.
One pricing procedure may have variant condition type and other pricing procedure may not have the variant condition type.
So check same pricing procedure is getting determine in the both documents or not
2.Condition record may not maintained for the scheduling agreement document type in VK11
So check the condition record maintanence for the variant condition type through VK13 transaction.
I hope this will help you,
Regards,
Murali.

Similar Messages

What is setps to crete the Sub contracting with Scheduling agreement .

Hi All,
what is setps to crete the Sub contracting with Scheduling agreement and up to migo
Thanks
HAPPY

hi
firstly set the SPRO> MM>Purchasing>set up Subcontractor order>assigning plants to the delivery documet LB
check following in system
1. Shipping point created properly
2. Shipping point has been assigned to the appropriate plant.
3. Maintain shipping conditions in customer master
4. Maintain loading group in material master
5. Assignment of customer to vendor master
then try following process
1. Create a subcontracting Purchase Order (ME21N)
u2022Click on u201CMaterial Datau201D tab under u201CItem detailsu201D and then click on u201CComponentsu201D to view the components / make changes.
u2022Account Assignment and Item Category are usually blank in a subcontracting PO.
2. Delivery of components to subcontracting vendor (ME2O)
u2022Enter selection parameters like vendor and plant and click on Execute.
u2022Select the desired line, click on Create Delivery and a delivery will be created.
3. Post Goods Issue (VL02N)
u2022The movement type is usually 541.
4. Post Goods Receipt (MIGO)
5. Logistics Invoice Verification (MIRO)
*check out the doc i given in previous reply it is for SUBCONTRACT with SA *
regards
kunal

Restrict pricing in scheduling agreement.

Dear friends,
I have created a scheduling agreement with referent to an RFQ. Since the quoted rate is already approved by the management, the user who are creating the scheduling agreement should not change the rate.
For this purpose, I have made the price field in the item level as 'Inactive' through field reference customisation.
But the problem is that, the user can do the changes in prices by clicking on the conditions icon, and there they can add, change any conditions and rates.
Can you please tell me how can we restrict these condition rates and restrict the user from adding new condition types.
Thanks,
Harikrishnan.

Dear Venkat,
Price will get determine in the sales order based on two settings
1.Pricing procedure determination
2.Condition record maintanence.
This may happen for two reasons
1.Different pricing procedures are getting determined for sales order and scheduling agreement.
One pricing procedure may have variant condition type and other pricing procedure may not have the variant condition type.
So check same pricing procedure is getting determine in the both documents or not
2.Condition record may not maintained for the scheduling agreement document type in VK11
So check the condition record maintanence for the variant condition type through VK13 transaction.
I hope this will help you,
Regards,
Murali.

The mass change of scheduling agreement

Dear all,
currently, i want to make the mass change to reject all the scheduling agreement in SD.
However, i could not found the schecduling agreemts in MASS and i also could not found the relevant date in the table masshead.
anybody would like to give me some suggestion?
regards!
Daniel

Hi,
Thanks for your reply!
i know what you mean. i also use the same way as you said to handle it .
but the problem is i could not get the scheduling date after inputing the slection screen.
I had tired to found the data in the table MASSHEAD and MASSVBAP, and it is missing.
my system's version is ECC 6.0. i suspect that is the reason.
whether it have the other tocde or the other object except the BUS2032 in which can make the mass change of scheulding argreement?
Thanks in advance
Daniel

How the accesses priview of schedule agreement

how to view the print preview for the schedule agreement
plz give your replys
K.Raghuram
Edited by: k Raghuram on Aug 27, 2008 2:26 PM

Hi,
Go to ME9L - Print/Transmit Scheduling Agreements
Here enter the proper selection and execute
In the output screen, click on "Display Message" to see the Print Preview
And click on "Output message" to print the SA Document

Disable the info record for Schedule agreement

Hi Everybody
Is it possile to disable info record in ME31L? Any help would be appreciated
Timo

Mate -
It is not possible in Standard SAP. You can only uncheck it for PO or Quotation. To do that, Go to IMG - Material Management - Purchasing - Environment Data - Define Default attributes for buyers - Select the attribute and Change info update (on indicators tab)
Hope this helps

Scheduling agreement pricing

Hi,
Pls tell me how the system will pick pricing in scheduling agreement. When i going to header condition system will give me message "
Not possible to determine a condition type
Message no. 06658
Diagnosis
The system was not able to find a condition type for the item. Price determination is therefore not possible.
Procedure
Contact your system administrator.
The latter can maintain the calculation schema assigned to the purchasing document using the Implementation Guide (IMG): Define calculation schema
Pls tell me how i can enter the header level conditions like freight & discounts.
Regards,
Dinesh

Hi,
First check ur access sequence in your codition type.Check ur condition types are there in the RM0001 Condition Supplement Header and RM0002 Condition Supplement Price. Please include your condition types for the both procedures.

Pricing Condition in scheduling agreement

Hi Gurus,
I'm working with scheduling agreements and I figured that whenever I create scheduling agreements, pricing condition PB00 gets defaulted to the scheduling agreement,
Can you guys be kind enough to tell me what configuration is driving this?? How can we make changes to the config settings so that I can have a condition type of my choice assinged to the scheduling agreenment??
More over I have a requirement to have a tiered pricing in scheduling agreement. I do know that this is driven by SCALES in SAP however as per my requirements I need to have SCALES per formulas. In the condition type configuration we do have a field for SCALES where we can assign the formulas but whenever I click on this field a screen pops up with some ROUTINES.
Can someone tell me how can I define the ROUTINES and the ABAP formula for this ROUTINE so that I can have my tiered pricing conditions accomplished??
Any feedback on this will be highly appreciated!!
Thanks folks,
Dhaval Joshi

Hi Ramesh,
Thanks for the heads up. I looked at the config for the schema dtermination and I see that the pricing procedure RM0002 has not been assinged to any vendor POrg schema in this configuration.
I then looked at the config for the condition type PB00 --> pricing procedure RM0002 has been assigned to the condition type PB00 and since we don't have any entries maintained for RM0002 in the schema determination config I was just wondering if this is what is influencing the automatic proposal of the condition type PB00 in my scheduling agreement.
Also can you please tell me what is a difference between a Purchasing Document (BIG) and Purchasing Document (Small) in the schema determination config.
All I wanted to accomlish here is my teired pricing to work when I assign scales on the condition type in the scheduling agreement ( not in the PIR)
What currently happening in my case is ....
Example: Scale From 1 pc - 100.00 USD
from 50 pc - 90.00 USD
from 100 pc - 80.00 USD
Target quant. 100 pc
schedule lines 30 pc
20 pc
The problem is that the goods receipt of 30 pc is valuated at the price 80.00 USD It always takes a lowest price on the scale.
I've tried looking for OSS notes and also looked enough on the forums but I could not get any resolution to this question.
I would appreciate if I could get any heads up from your side.
Cheers,
Dhaval

Schedule Agreement PO Pricing condition

Hi All,
i have problem in picking up tax conditions maintained in schedule Agreement po.
For normal PO, i am using ekko-knumv = konv-knumv and ekpo-ebelp = konv-KPOSN and getting all tax conditions .
But for Schedule Agreement Po , when same condition is not working because field "ekko-knumv" is blank.
can anyone please help me how to get tax conditions for schedule agreement po.
Thanks in Adv.
D Naresh kumar
CAN ANYONE PLEASE GIVE SOLUTION FOR THESE PROBLEM
Edited by: ajju_bobby on Jul 9, 2011 2:10 PM
There is no solution for these case?
Edited by: ajju_bobby on Jul 11, 2011 9:34 AM
Edited by: ajju_bobby on Jul 11, 2011 12:22 PM
Edited by: ajju_bobby on Jul 11, 2011 6:17 PM
Edited by: ajju_bobby on Jul 15, 2011 4:18 PM

sorry, don't know exactly the fact, but tried ST05? also debug with breakpoint at "call function" sentence could help.
maybe check select corresponding fields from EKPO into structure like FPLA and call function BILLING_SCHEDULE_STATUS with i_fplnr = fpla-fplnr. billing schedules also have data at FPLT
maybe could help

How to insert the new field to standard scheduling agreement script form.

Hi Gurus,
how to insert the new fields to standad sheduling agreement script form. its a need for me, i want to display the AEDAT field in scheduling agreement form ,
The below one is my requirement,
ex:- Itu2019s requested the change of Scheduling Agreement printout. Itu2019s requested for this type of document, the insertion, into the field u201CData Emissionu201D into the print, of the document last modify date instead of the document creation date. (This change will be done only for position change into the Scheduling Agreement). No change into the PO.
Change SAPSCRIPT printout. Introduction, into the Scheduling Agreement, of last modified
 document date (field EKPO-AEDAT).
Thanks & Regards
chinnu

open TNAPR table and give the output type you need to modify.... get the print program name and check if some structure already have the date you wanted... if you have it already... then open the form in SE71 tr. and provide the strcuture name - feild in the position you want to have the date...
se71--->
&<str. name>-AEDAT&

Order more that the quantity in the schedule agreement

Hi,
Is it possible to order more that the quantity in the schedule agreement ?
If yes the please explain in detail.
Regards
Asim

Hi,
I hope its not possible to create schedule lines more than the quantity mentioned in scheduling agreement.
Regards,
Prabu

How to change delivery priority in stock transfer schedule agreements.

Hi Experts,
we have an issue, the delivery priority is changed in the customer master recently and the deliveries created for the old schedule agreements pick the old delivery priority. we need to change the delivery priority in schedule agreements.
Is there a way to change the delivery priority(in item shipping data) in stock transfer schedule agreement(doc type= LU).
I tried changing it in ME32L but its just a display.
Thanks
Mahendra

Hi All,
Can any one reply to this.
Thanks
Mahendra

Correct usage of Scheduling Agreements?

Hi Experts!
One of my groups is using scheduling agreements, however I do not think they are using it the way SAP had intended.
Example: They use Scheduling agreements, similar to a blanket order. However, the blanket order quantity is fluid and the order can remain open even when the initial quantity has been fulfilled. These Scheduling Agreements will contain many items, sometimes around 30-40 line items.
The staff basically conducts two activities for these customers: enter new scheduling agreements with updated validity dates and expedite releases with a less than two week time frame. These expedites are communicated by the customer via email.
The customers submit a 16 week forecast via EDI as well as a firm 2 week JIT. Most scheduling agreement activity occurs systematically, although there are daily expedites for each customer for a few parts.
Initially, when entering a scheduling agreement, the staff does not indicate the JIT schedule. However, they do enter into the Forecast delivery schedule, basically just to activate and allow communication from customer.
My concern is should scheduling agreements contain that many items?
Also, the staff makes many changes in the scheduling agreements and when it reaches the time when the period for the scheduling agreement, what ever material they did not get to ship, they ship it to the customer in one bulk. Are you suppose to do that with scheduling agreements?
In addition, sometimes the staff allocates some of the materials promised to the customer on the scheduling agreements to another customer, then just re-allocates it back at a later time...should this be done or is it bad business practice?
What are good business practices for usage of Scheduling Agreements? Any information will be greatly appreciated. Thank you for your time in advance!
WC

My concern is should scheduling agreements contain that many items?
Also, the staff makes many changes in the scheduling agreements and when it reaches the time when the period for the scheduling agreement, what ever material they did not get to ship, they ship it to the customer in one bulk. Are you suppose to do that with scheduling agreements?
you should not do that the reason is SA is use full for the JIT and promise to deliver things
In addition, sometimes the staff allocates some of the materials promised to the customer on the scheduling agreements to another customer, then just re-allocates it back at a later time...should this be done or is it bad business practice?
It's depent on the company bussiness policy - not rgiht process but if bussiness want to do then what else you can do?
What are good business practices for usage of Scheduling Agreements? Any information will be greatly appreciated. Thank you for your time in advance!
A customer scheduling agreement is an outline agreement with the customer containing delivery quantities and dates. These are then entered as schedule lines in a delivery schedule. You can either create schedule lines when you create the scheduling agreement or you can create them later.
You fulfill a scheduling agreement by creating the deliveries in the schedule as they become due. You process deliveries for a scheduling agreement in exactly the same way as you process a normal delivery. After you have carried out the delivery, the system updates the Delivered quantity field in the scheduling agreement item with the delivery quantity. The following graphic shows the document flow for scheduling agreements.
The same functions are at your disposal for processing scheduling agreements as there are for the sales order, including pricing and availability checks.
In addition to the standard scheduling agreements you can also manage scheduling agreements for the component supplier industry, with their special features that include:
Working with scheduling agreements with EDI output
Entering scheduling agreements in a forecast or just-in-time (JIT) delivery schedule
Using different types of cumulative quantities
Taking into account the automatic fiscal year change used by the component supplier
Managing engineering change statuses
Storing packing proposals
Creating correction deliveries for the scheduling agreement
Working with external service agents

Customer scheduling agreement - explosion of BOM

Hi SAP experts,
At our company we have a lot of projects. We are in the process of selecting an appropriate way to handle these in SAP. We came to the conclusion that a scheduling agreement could do what we want.
Unfortunately we discovered a problem in our current configuration with respect to scheduling agreements and LUMF materials.
When we add a LUMF material to a standard SD document, the LUMF material explodes in all the necessary materials.
When we do the same in a scheduling agreement we get the error that the T 184 table does not contain a position type for ZLZM LUMF.
Would it be possible to configure this? Could you give us a clue on how to make this possible?
With kind regards,
Nanne Sluis

Hi Nanne,
Yes it is possible for the BOM to be exploded in the sales document the following setting has to be done.
If the item Category group in the materail master is LUMF, the item category of the BOM item is TAP. In the definition of which we need to take the value A Explodes single level BOM in the field structure scope.
Item category group is LUMF , bills components but not the main item. For this the following setting has to be done.
The item category of the main item is TAP, which is not relevant for pricing and item category of the components is TAN, which is relevant for pricing.
Sales Doc Type    Item Category           Usage         Higher Level Item             Item
                              Group                                    Category                Category
            OR     LUMF                -
              TAP
            OR     LUMF                -
                TAP              TAN
Hope this will give u some light on BOM configuration.
Regards,
Sudarshan.

While creating scheduling agreement PO-Condition error

Dear Experts
While creating scheduling agreement PO , I am getting the following error
Condition JCDB is missing in pricing procedure A M RM0000, Please advise how solve this issue.
Regards
R.Rajakarthik

every thing is ok, for the same vendor already scheduling agreement there, when i tried to create copy with reference its ok there is no error . but when i tried create without reference i am getting the error.
and also the default conditiond also changing,
Create With reference : Gross price condion is P001
With out reference:Gross price condion is PBXX
were will be this link?, will you please tell me

Picking of the varient pricing in scheduling agreement

Similar Messages

Maybe you are looking for