Picking req.docu.flow stays open even the outbound delivery is fully picked

Hello,
I see picking requests open in the document flow of a fully picked outbound delivery even after posting goods issue it stays open.
Any suggestions how to get the picking request completed?
Thanking you in advance,
Kind regards,
Nilüfer Çalışkan

Hi dears,
My problem is not solved yet. I am trying to clarify the problem case by looking to outbound delivery document's picking requests of both status cases open and completed. I realised that if MM-WM transfer order confirmed id (VBFA-TAQUI) is empty in VBFA table for picking request line (VBFA-VBTYP_N =Q) picking request status stays open, if VBFA-TAQUI=X than request status is completed in the document flow. Outbound delivery is fully picked in both of the cases and WM is not used.
Thanking you in advance,
Kind regards,
Nilüfer

Similar Messages

Document flow is not updated in outbound delivery

Hi,
I have issue at my client side that We create Transfer order and it is not updating in outbound delivery document flow. Update without delay is check in shipping configuration. Can somebody please provide the reason, Configuration missing or some OSS note which can help us?
Thanks,
RD

Hi rohit
I had refered to SAP OSS note 358454 earlier.
Reward if useful
Regards
SE

Command window stays opened at the end of script execution

Hello everyone,
Since I install Windows 2012 R2 systems, the command window opened when I execute my batch scripts often stay opened even if the script has ended.
As an example if I double-click a batch file, if the last line of the script is "echo here", it displays "here" and the window is not closed by Windows (it's not active of course, it just stays opened).
I found an easy way to trigger the (apparently) same problem. Do like this:
- right click the Windows button at the bottom left. Select "Command prompt"
- in the command window type "mstsc"
- close mstsc clicking on the close button
- type "exit" in the command window (or click the close button)
Now the command prompt is "frozen". I cannot type any command in it and I have to click the close button a second time to close it.
Anyone has an idea what is causing this?
Thanks

Hi Anna,
Sorry. I didn't receive any update notification email :-/
I tried using "start" as you suggested by you and the article you gave. No change at all.
To explain better I did a video you can see here : http://pferrucci.perso.sfr.fr/Issue/ (unfortunately I couldn't do it better).
It shows :
- I open a command prompt as Administrator (just to be sure, but it's the same as a non-admin user)
- I run taskmgr and I close it when it opens
- at this point, I type "exit" to close the console window. NOTE: at this moment you can see the window title changes from "Administrator : command prompt" to "command prompt". Maybe it is of interest.
- from now on, I can't type anything at the prompt. It is just disabled.
- I click on the close button once (see below)
- I open a second command prompt as Administrator. I run taskmgr and I close it.
- at this point, I click the close button once to close the console window. The button reacts but the window stays opened. At this point I could type some text at the prompt, the prompt would not react. It is just disabled.
- I click on the close button a second time. The Window goes away.

After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)

After upgrading my iPhone 5 to iOS 7 iTunes will not stay open once the app launches...does anyone know how to fix this? Please Help :)

I have exactly the same problem. I too have tried everything that's been suggested, but still not working. Don't really what to do next? I have an iPhone 4S.

Automation error - No document is currently open in the Acrobat Viewer

Hello
We have a Visual Basic application that we use for automating tasks in Acrobat on a batch of files. This application calls a folder level javascript to perform most of the tasks and is invoked via an application menu item (to get around some of the security restrictions). This application runs fine in Acrobat 7. Recently we upgraded to Acrobat 9 and the application doesn’t work any more. The error that is being generated is
        No document is currently open in the Acrobat Viewer
I have isolated the problem down to the piece of code that accesses the fields object of the AFormAut.App object. We use the fields object for executing the JavaScript methods. The FormsAutomation sample application that comes with version 9 of the SDK generates the same exception. I have seen references to this problem on various forums but there can’t find a definitive answer.
avDoc = CreateObject("AcroExch.AVDoc")
Dim file As String = System.Windows.Forms.Application.StartupPath & "\..\..\..\..\TestFiles\FormsAutomation.pdf"
bOK = avDoc.Open(file, "Forms Automation Demo")
'If everything was OK opening the PDF, we now instantiate the Forms
'Automation object.
If (bOK) Then
            formApp = CreateObject("AFormAut.App")
            acroForm = formApp.Fields
Else
            System.Runtime.InteropServices.Marshal.ReleaseComObject(avDoc)
            avDoc = Nothing
            MsgBox("Failed to open PDF Document. Aborting...")
            End
End If
To get around the problem I have to display the document that is currently being processed. This doesn’t seem correct as we don’t an acrobat window open when our application is processing a batch of files. Has this method of automation been removed from Acrobat 9 deliberately or is it a bug?
BTW I am not sure if this is the corrent forum to post this question. If there is a more appropriate forum for this query can someone point me in the right direction.
Any help would be greatly appreciated.
Thanks
Paul

Yes. I have applied all patches up to 9.3

Help! Folder Windows won't stay open in the Finder

Please, what is causing this and how do I fix it? Some folders will not stay open in the finder. For instance, when I click on the Applications folder (either the actual or alias), the window will try to open, but before it can show its content, it disappears. This doesn't happen with all folders, only some of them. This is very disturbing.
Please help if you can.

Through the network I was able to figure out what was going on. There was a weird file, its name was made up of Chinese characters. Whenever it was supposed to show up on the screen of this one mac, the window would close. I guess that particular mac isn't set up to show those characters. I was able to trash that file and that took care of it.

Each window that I open stays open on the screen. How can I get rid of this "tiling"?

On an iMac G4 with OS 10.4.11, recently each window I open stays on the screen when I open files within them. This creates what I think is called "tiling." I must have given an erroneous command, and I don't know how to get rid of it. I hope someone can help.

Are you referring to Finder windows? Those are akin to Explorer windows on a PC.
If so, it is normal for them to stay open on the desktop when you open a file they display. If you mean they open a new window and clutter the desktop with tons of open windows, there is a fix for that.
Click once on the desktop so you are using Finder. On the top left, click "Finder - Preferences" Uncheck the box next to "Always open folders in a new window"
The change is immediate.
Hope that helps.

Why does the Firefox application stay open in the background when I close it?

I have a WN XP PRO desktop and a WN 7 Pro laptop. Every grade of Firefox has the same problen of staying open in the background at times. I have always had to restart my computers to clear it. Why can't this problem be fixed? I see that others are having the same problem. The only time that I know that it hasn't shut down is when I try opening it up. It may be running when I am using IE or Google. It has to be slowing my computers down.

There's no way a 16GB model phone has more than than capacity. I have no idea what you mean by AutoRun icon. Is that an app you downloaded? Did you jailbreak?
The "advertised" capacity of all storage devices is based on a decimal definition of "Gigabytes" where 1 GB is defined as 1,000,000,000 bytes. However computers see and calculate storage based on binary definitions where 1 GB = 1,073 742,824 bytes. Thus a 16 GB "decimal" device is only 14.9 real, binary gigabytes.
Also, there are additional loses due to formatting overhead and the iOS. RAM memory is separate and not used from the supplied flash disk.

Help required regarding the outbound delivery creation by batch job

Hi Gurus,
We are facing one problem in the outbound delivery creation.
The deliveries will be created automatically (using program RVV50R10C) from the existing open sales orders through the run of a batch program for every 5 minutes.
The program RVV50R10C is scheduled to run for every 5 minutes, which picks up all the open sales orders and creates outbound deliveries. However, during one run we have found an error.
The error had message class V50R, message no: 024 and message type : I. The error message reads as follows : u201CAt least one order was blocked and could not be deliveredu201D.
When we have checked the VBFS table, it showed the sales document line items with the Message type : E, Message no: 24 and message id : V50R.
Can anybody decipher what could be the reason why this error message is appearing?
Thanks in advance,
Krishna

Hi Friend,
to clearly identify the issue,
Goto SE38 and give the program which you are using as Back ground job to create the deliveries and give the sales order number as mltiple entries and execute the program in back ground.
In most of the cases we can identify the issue behind the job while doing this.
please revert me if you need more clarification
regards,
santosh

GR against the Outbound Delivery

Hi
If I MIGO Goods Receipt referencing the PO the Stock account is posted.
But I MIGO Goods Receipt referencing the Outbound Delivery Order the stock account is not get posted.
Basically, I am doing GR for the Intercompany STO (using NB P.O type).
since the GR reference the PO throws error as the Delivery document flow cant be updated, I am exploring into GR ref to OBD.
Thanks
regards
RG

Hi Sachin
I am using 643 & 101.
after GI (shipping plant) - 643 makes a credit posting to shipping plant account and a COGS (Cost of Goods Sold)
For the Receiving plant- 101 upon goods receipt only the stock inventory should be get Debited. Which is not happening now.
Infact my sand box works fine, but something strage the test box after 101 the stock account is not posted anything, only the GR/IR and PPV.
I do compare in OBYC & MMPV account grouping, but could not find anything different.
any expertise support is appreciated..
regards
RG

HU Error-While posting the PGI against the Outbound Delivery

Hello,
I am facing the issue,when posting one PGI against the outbound delivery.The error is as below:-
" Negative stock: 8,000 material: 51238495FA on HU 00233034307019924815"
The error message detail is :-L9-604"
Could you please let me know,how we can overcome this issue.
An earliest response would be appreciable.
Thanks
JP

Have you completed TO and ITs confirmation process for the outbound DElivery ?.If yes then if you are using warehouse managed material then check the stock in LS26 it should be 916 location and then check the handling unit stock.
Check the Handling unit status is 01 status or some other status.If it is 01 then definatly sytem will allow you PGI.Check your HU history is your delivery is final document or not .It seems some mismatch with delivery qty and handling qty in your case.

UPDATING THE OUTBOUND DELIVERY

Hi ABAP Gurus,
I have one urgent requirement as below,
   Outbound delivery gets updated/picked for the quantities as stated in the related inbound delivery via BAPI_OUTB_DELIVERY_CHANGE or WS_LM_GOODS_MOVEMENT , or WS_DELIVERY_UPDATE.
1.1.1.2.        Outbound delivery gets additional data as described in section .
                Required fields to be updated into the outbound delivery:
Source
Description
Target
Description
Specific
ZMM_EDI_CONF- ZFWNR
MAWB/OBOL number
LIKP-BOLNR
Bill of lading
Conf. type 1
LIKP-TRAID
Means of Transport ID
LIKP-TRAID
Means of Transport ID
HAWB/FCR number
ZMM_EDI_CONF- ZCSBR
Broker reference
LIKP-LIFEX
External reference
Conf. type 2
ZMM_EDI_CONF- ZCSDO
D.O. date
LIKP-TDDAT
Transportation planning date
Conf. type 2
ZMM_EDI_CONF- ZCFTN
Trailer number
LIKP-TRMTYP
T.B.D.
Conf. type 3
ZMM_EDI_CONF- ZFWVN
Vessel name
Text-ID Z060
Conf. type 1
LIPS-LFIMG
Quantity
VBFA-RFMNG
Pick quantity
Please help me by sending th ecoding to how to update the outbound deliveries.

Got the solution.
Thanks.
Edited by: zamishaik on Jan 24, 2012 6:03 PM

BADI/user exit to be used EIPO-TEXT1 field of the outbound delivery line item?

Hi ABAPERS,
Need some help on an enhancement with reference to outbound delivery in SCM module.I have a requirement for an enhancement to ensure that the License Check is performed for each Delivery Item based on the Material`s Export Control Parameters and updating the license number identified against each of the line item in the outbound delivery in a predetermined field.
Basically, Using enhancement, find the appropriate License based on the information fetched from the Delivery Document and check if this is matching with the available License Information. Then the appropriate License fetched should be visible in the License Log of the Delivery Document.
The valid License No. fetched should be updated at the Delivery Document Item – Foreign Trade – Comments Tab-Description Field 1.(ie. populate the license T606Z-GENNR in EIPO-TEXT1 field of the outbound delivery line item.).
Could you please advise on the BADI/user exit to be used in this case. Request your inputs.

I found the solution myself. I was actually not needing a user-exit to do this. I just simply solved it by using function modules READ_TEXT and SAVE_TEXT in a customer program.
Regards.

Stoarage location is not being reflected in the outbound delivery

Hi
I have a scenario of creating outbound delivery with respect to sales order, But when i am creating outbound delivery vai tranaction Vl10H , The system creates outbuond delivery but the stoarge location is not being reflected in the outbound delivery . Since this storage location is WM managed hence the WM status shows that the transfer order is not required .
When i tried to put manually the storage location the system throws an error that this storage location in not maintained in plant R001 .
Althoght the stoack has been there in the stoarage location with resepct to plant ans also the matrerial master is also been extended for this storage laocation and all the respective views such as WM and Sales hasbeen maintianed .
Could any one guide me what correction is to be done to incorporate the Storage location in Delivery ?
Thnaks and Regards
RAJ K

Hi,
did you check if there is a storage location determination maintained for the relevant combination of shipping point, plant and
stor.conditions (table TVKOL)?
Please also check if the storage location determination is activated for the relevant delivery item type in customizing (transaction 0vlp - field "Determine storage location" (V_TVLP-BELGO)).
Regards,
Ely

Idoc used by CRM to post the outbound delivery in R/3 while saving the sale

Hi,
Can any one tell me which idoc (from the r/3 system) the crm system calls while creating a inbound delivery for the sales order created in crm.
I am having fields like Transaction Type, Ext. Reference cust, Delivery Control etcwhich are there in the CRM.These fields need to copied to the R/3 in the tables LIKP and LIPS.
The process of creating the outbound delivery is automatic means when a sales order is created and saved in CRM ,the delivery is created in the R/3 (note: the order is not moved to r/3 ..Only delivery is created).
I need the idoc which is used by the CRM system to post the outbound delivery and any badi .so that I can extend the idoc segments and use the badi to populate the data.
Need your inputs on this.
Thanks in advance.
Regards
Shafath

Hi All,
For this requirement IDOC's are not used.Bapi is used.
The BAPI BAPI_DELIVERYPROCESSING_EXEC will be enhanced to add the new fields into the BAPI structure.
The BADI /SPE/BAPI_DLVEXEC_EX and the user exit EXIT_SAPLV50R_CREA_001 will be used to populate the data into the new fields created in the BAPI structure and the new fields added into the tables LIKP and LIPS.
Regards
Shafath

Picking req.docu.flow stays open even the outbound delivery is fully picked

Similar Messages

Maybe you are looking for