Picking without Storage Location

Hi,
Right now we are able to put a pick quantity to the delivery, even without Storage Location, in Picking Tab.
Why is this possible? Can we put a control to prevent the user from input of pick quantity if there is no Storage Location?

Hi,
Thru Incompletion Procedure ,you can make a storage location as required field.While they are going to create delivery if they miss to maintain storage location then system will show this field in incompletion log.
Let me know if you need any further help on this.
Thanks,
Naren

Similar Messages

Consmption to asset without storage location

Dear all,
I have created a Intercompany PO with accoutn assignment? When i see at the good receipt done- its without the storage location.
So the problem is now i want to do the consupmtion for asset using 241 moveemnt type. But this movement doesnt work as it requires a storage location and i am stuck. Please can somebody help. thanks to all.
Cheers
Jasmeet

I have created a Intercompany PO with accoutn assignment? When i see at the good receipt done- its without the storage location.
You already goods receipted with account assignment.So it is alredy consumed against account assignment.
So the problem is now i want to do the consupmtion for asset using 241 moveemnt type. But this movement doesnt work as it requires a storage location and i am stuck. Please can somebody help. thanks to all.
You can not use consumed material again with 241 mvt type.You need to choose materials which are in stock and it will allows you post
Edited by: Sridhar Jayavarapu on Feb 9, 2010 5:09 PM

MRP run without one storage location

Dear All,
My client's requirement is they need to run MRP on plant level without considering one storage location stock
e.g if a material is having stock of 10 in unrestricted with storage location 1104. Now when mrp is run for 100 quantity planned order is created for 90 only planning strategy is 40....they want the MRP should not consider the stock in storage location 1104.....how this can be made possibe?
Please Suggest...
Regards,
Pawan Shetty

Dear all,
Pl. help me which user exit implemented for MRP RUN without Storage location ,b'coz. from slandered setting we are not able to do the same
Regards
Sandeep

VL10B - change Storage location for delivery

Hi all,
I have a requirement wherin, for the deliveries created for purchase orders, the storage location needs to be defaulted from the production order. The configuration of picking has only one stloc for my plant, but we have the same amterial stored at 2 storage locations. In the config we cannot maintain both stlocs for 1 plant. So I need to see if I can do an exit wherin I can read my production order and pick the storage location from there and post it on the delivery. Cn anyone help?

hi Roy,
solved this by finding a BADI under Shipping of deliveries which has a SAVE_DOCU_PREPARE interface taht can be triggered toi change storage location/
Thanks for ur help.
Problem solved.

Erorr while changing storage location in VL02N

Guyz,
Firstly despite the plant+storage location + warehouse no. assignments are done , my replenishment delivery (delivery for stock transport order between plants under same company code) is not picking up storage location and warehouse no and thus stopping me from doing picking and PGI (post goods issue).
However in VL02N when i'm trying to change storage location for line item, i'm getting following weird error
*Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /*
I found a SAP Note(133223) regarding this error and VL02 transaction but that note was specific to older versions. I'm on ECC 6.0
Any suggestions please ?
Thanks

soumya - I did assign the picking location for my combination. However I noted, if i do this bit, i'm not able to create replenishment delivery from vl10b and erroring with below error. If i remove this assignment, i am able to create the delivery but delivery does not have storage loation. when i tried to change the storage loation in vl02n, i'm getting same below error ...
Error while determining ref.mov.type for WM via Table 156S: 647/ / / /L/ /
Sivanand - Wheni do transfer order, its complaining that storage location is empty when i try to change storage location, as mentioned above, i 'm getting above error....
appreciate any inputs ....
I DID CREATE THE 647 MOVEMENT TYPE ASWELL BUT I'M GETTING SAME ERROR ... Can anyone suggest what control information should go when creating 647 mvt type.....?
Edited by: Kasu on Sep 10, 2008 10:56 AM

Automatically creation of storage location for material, in MF60

Hi all,
my collegue of PP module uses MF60 transaction.
When he puts XXXX as Replenishment storage location, the system tells him this error: To stge loc. XXXX does not exist for material M1010000182 in plant 0001.
In MM i have activate the automatic creation of storage location for plant 0001 and for all movement types.
Why MF60 does not respect this requirement?
If I try to do movement type 311 with MIGO, manually, there's no problem to transfer the material from a storage location to , XXXX s.loc.
Is there something more that I have to do?
Thanks in advance!
Best regards
Alba

Thanks a lot...
the note says:
Summary
Symptom
A material without storage location view exists.
If within a single material document, this material is moved in such a way that no change in stock occurs in total, the system does not create a storage location automatically even if this is set in Customizing.
Additional key words
OMC3, XLAUT
Cause and prerequisites
All postings to a segment (for example, material, plant, storage location) are only executed if a change in stock occurs. Only in this case, storage locations are created automatically. This way it is made sure that no empty segments are created.
Solution
The system behaves correctly.
Header Data
Release Status:
Released on: 07.07.2000 22:00:00
BUT why IF i do 311 in MIGO, system creates automatically storage location (also if no change in stock occurs in total).
AND if doMF60 (that does mouvement 311), system does not create automatically the storage location?
Best regards
Alba

Outbound Delivery and Storage Location

hey everybody,
this is our status quo:
we create a outbound delivery based on a sales order & at the end of the creation of the delivery we are doing the goods issue immediately to do the material movement. we do that, because we need a material document for the physical packer in the storage. at the start of the physical packing he gives this material document to the person in the warehouse and this person picks the needed material.
we need a solution for our new scenario:
in the future we want use handling units within deliverys. in these HU's we want to pack the material included in the delivery note.
here are the steps:
1. outbound delivery creation
2. we need a material movement (material document) from one storage location (A) to an other storage location (B)
3. the packer is packing the material physical and within SAP in the new created handling units
4. when the packing operation is finished, the packer gives information to SD person and the goods issue will be done. material movement will be done from the storage location (B).
does anyone has an idea for us?
another information: we don't want to do the material movement manually
best regards & TIA
chris

Dear,
As per standard SAP , once you assign the storage location in OUTBOUND DELIVERY, system will tend to pick the storage location assigned to it.
But as per your client requirement, you need to do the transfer posting from one storage location to other storage location and then you would like to post the "Goods issue" from the new storage location.
If it has to be done, you need to update the "Outbound delivery" with new storage location before posting the goods issue.
Is there any business advantage with this new process,If so i can suggest you one work around if you are doing transfer posting with respect to "Each out bound delivery"
Details as Follows:
Step-1:
While transferring the stock from one storage location to other storage location(Movement type:311 single step), mention the out bound delivery number in "Document header text" or "Material Slip".
Step-2:
Then take a report of those transfer posting documents and then update all the outbound deliveries for new storage location.To update in mass, you can set BDC with the help of ABAPER
Step:3
Then do "Post goods issue".
Regards,
pardhu

Storage Location required entry in Material Master

Hi
My client requirement is, at the time of creation of Material Master, System will ask for Storage Location.Without Storage Location, Icann't create Material Master.
Even if I'll select Plant and Storage LOcation View & Warehouse View, System is not asking the storage Location.
Can anybody suggest me where I'll set the setting so that system will ask for Storage Location mandatory in Material Master.
Thanks & regards
PKB

Hi Raja,
Thanks for your reply.Before Posting the thread, I've already checked these Views what you told.But system is not asking me to enter storage location.
You can check in your system.
System only asking for plant not storage location.Even if we select warehouse view, system is not asking for Storage Location view.
Thanks & Regards
PKB

Storage Location is not popullating in the PO(for stock materials)

Hi All,
we are facing a issue regarding the Storage location in SRM 5.0.(patching SAPKIBKT14) when we try to create a PO with Stock material then the PO will be created but without Storage location.But during the confirmation it will give error saying "Enter Stor. Location ".
if we enter the storage location manually it will work fine , but we need it should take automatically like other materials.Note:There is not problem if we do SC .. it will populate automatically.
Please help us.
Regards
Channappa Sajjanar

Hello Channappa,
Please maintain storage location in field "Storage loc. for EP" in MRP2 view via transaction code MM02. Once this is maintained the storage location here, it will automatically populate in the purchase order.
Hope this helps.
Thanks & Regards,
Sunil Katyare

SAP AFS - VL10B delivery from specified storage location

Dear all,
I have created STO for an AFS material.
As this material is available in various storage locations of the supplying plant.
Now I am trying to create delivery through VL10B, entered the Purchase Order, Plant and specific location in the material tab, but system is not generating any outbound delivery in the background.
again, in VL10B, if I have not specified any storage location in the material tab, system is generating the Outbound delivery for multiple storage locations with reference to batch split.
How come system is not picking the specified storage location in VL10B transaction.
Can I specify the issuing storage location while creating the STO, so that during VL10B, automatically the system will pickup the same storage location.
thanks in advance,
urendra

Dear Urendra,
If you creating a delivery for an AFS material, system picks the stocks based on the allocation rule defined in the system. Hence first efine the allocation rule in the system.
To achieve the functionality of issuing stock in case of a STO from a
particular storage location kindly maintain the below customizing.
1) Go to transaction J3AS -> arun detail -> define allocation logic ->
stock sorting
3) Here maintain a stock sort rule .
5) To this sort rule you can assign fields in this case it would be
LGONR with field values EW and QA
6)Once that is done, give the priority to the storage location in
accordance to your requirement.
7) Assign this sort rule to the main Arun type following the
path J3AS-> ARun type-> here select Arun type and then under allocation tab
go to the allocation rule maintained , out here there is the option
stock sorting.
Once this is done the storage location picked would be in the order
of the above mentioned priority.
Only if there is no stock in storage location of higher priority
will the stock be then picked from storage location of lower priority.
I hope this helps.
Regards,
Rakesh

Storage location code should come in PR/PO

Hi All
Whenever I am creating a PR or PO,I want storage location code should come instead of storage location description in storage location field. System picks this storage location from MRP2 view of the material.
How do I achieve this?

Hi,
to display the key..
in the transaction..either ME51N or ME21N..
there is a Icon called Personal setting..after clicking the same you have a window opened ..in this in the Basing setting tab..in the section conversions
click on the Display key check box..
then the respective keys would come.
Note--this would effect for the Plant and Storage location both and is ID dependent and has to be done individually for IDs for which they want this setting.
Hope so it helps
Regards
Anjanna

BAPI or FM to Update storage location in outbound delivery with many items

Hello!
I have an urgent problem.
Storage location determination didn't work and were created thousands of deliveries without storage location.
We want to run LSMW using BAPI.
Which BAPI can update storage location (for many items in delivery. We saw an option to update the first item' but not all of them)
PLZ try to help
thank You

Hi,
check this FM:
RV_DELIVERY_PICK_UPDATE
SD_DELIVERY_UPDATE_PICKING

Storage locations - Should we delete or option to be blocked?

Hi All,
Our client has some project site where central warehosue willdeliver the material. These project sites can be created as storage location sfor delivery address purpose. After the project is completed nobdo should pick this storage location as delivery address. What options do we have ?
1) Delete the storage location OR
2) We have any option of blocking this location for delivery?
Please help in that.
Thanks in advance,
KHAN

Hi Shamsul,
You should not really delete the storage location as this will effect existing material documents etc that refer to the location
You probably want to change the description to 'Do not use' and then see if you can restrict further access via the use of Authorisation objects
Regards
Steve

Reg.Storage location make mandatory

Dear Expert
During the Purchase requisition creation the PR is saved without storage location, we want to make it error, how to make it. Pls help me.
Storage location is must to us. how to configure it.
thanks in advance
Rajakumar.K

Dear Experts
how to make the storage location as mandatory, don't have to go to screen layout ->basic data, because plant has set to mandatory
without tick in basic data mandatory field,like that we we to make it. Please help me.
Thanks in advance
Rajakumar.K

Has anyone picked materials from one storage location but confirmed TO to different storage location?

The business does not want to use MRP areas to segregate materials between service part and production. What they want to do is separate service parts on deliveries at our shipping storage types (915/916) from MRP view. This requirement is primarily for our international shipping area. We may pick parts for an international shipment and the parts will sit on the delivery - not goods issued because we don't want to invoice - for up to 3 months. During that time, MRP sees the inventory so replenishment is not done in a timely fashion or parts may get stolen from the shipment for a production requirement because the inventory is seen.
Could one solution be to create a non-MRP relevant storage location (say 1200) and place the shipping storage types in this storage location? Then when the transfer order creates, the system would show the source to be from the MRP relevant SLoc (1100), stype (130), bin (A-01-A), - these are examples - with the destination to be to non-MRP relevant SLoc 1200, stype 915, bin (dynamic using the delivery number) 0080745298? Has anyone had this type of request or know of a way to satisfy the business requirements without different MRP areas? They also do not want to have two transfer orders - one with a 601 movement and one with a 311 movement.
Any known solutions or outside-the-box thinking would greatly appreciated.
Marla

I don't have the solution, just some critical questions and hints
Even a non-MRP relevant storage location can be warehouse managed.
The stock is shown in any stock list as long it is not goods issued, no matter if it is stored in a
non-MRP relevant storage location.
Stock that is picked for a delivery is not available for others, it is reserved. A delivery is a MRP element and hence should be taken into consideration in the planning run.
A non-MRP relevant storage location will only solve your planning issues if you move the material there if it is not yet picked and allocated to a delivery.
Do your thieves really use SAP to check if the stock is there, or do they just see the stock in the warehouse? As said, the non-MRP relevant storage location will not solve this issue since the stock is still visible.

Picking without Storage Location

Similar Messages

Maybe you are looking for