Picklist Demo doesn't display records

I tried the picklist demo, and substituted a query on my DB for the employee one in the example.
When I run the form, the message line shows "Record: 1/17" and I was indeed expecting 17 records to be selected by my qualified query. But no data is displayed on the screen! I didn't alter the demo code in any way, except to substitute my query. Does anyone know why I can't see my data?

Welcome to our community, Denise
Perhaps check the names of all the files involved? What type
of web server are you using?
You say that your co-worker said she is linking to the skin
file from a .htm page, but what is missing here is whether she is
using the .HTM page you provided in the mix or if it's one she
created herself. If it's one she created herself, that may be the
issue.
Cheers... Rick

Similar Messages

Secondary Cost Element Values doesn't display in Profit Center Report

Hi everyone,
I'm having a problem with our Profit Center plan/actual/variance reports wherein it doesn't display the postings I made to the Secondary cost element when I executed an assessment cycle (KSU5). I already set in the configuration that all postings to be done in the cost centers, should have a parallel posting to the profit center assigned to it. I can see the postings in my cost center reports, but not in my profit center report. Could I have missed out on any procedure to enable the secondary cost element parallel posting in my profit centers? Any help would be appreciated. Thanks!

it might be the configuration of the library or some parameter in the report (record type should be 0 and 2 for actual values, where 2 stands for distributed values and 1 and 3 for planned values)
but it also might be that the reconciliation is done between different CC and same PC
- check your CC organisation asignment
- if sender cost center and receiver cost center have tha same PC it is probably the reason
- I had that problem my self and didn't solve it
cheers
matej

"0" doesn't display before comma in float numbers...

Hi fellow APEX users,
Have you ever experienced this issue with float numbers in your APEX forms?
When I type float numbers between -1 and 1 in forms (e.g. 0,7 or -0,2), and after having submitted the form then reloaded it for editing, "0" doesn't display before the comma.
For example I got:
*,7* instead of *0,7*
-,2 instead of -0,2
etc.
If I look in SQL Workshop, I see the same (no "0") but I'm pretty sure that the value is properly recorded in the database.
The thing is that it's not very nice for the end users, as they can think the value is wrong.
Does anybody have a solution to display proper float numbers with "0" in the forms?
For info I use the NUMBER type.
Any help much appreciated!
Thanks,
Romain.
Edited by: romain.apex on Feb 5, 2012 8:30 PM

Hi Peter!
Of what type is your item? Display as text or do you use the item value for further computations.
If it is only for means of displaying the correctly formatted number, I'd change the item source to a query and would equip the desired column with a to_char function like:
select to_char(str_be_main, 'fm999G999G990D00') from yourtable where ...You could also use a post calculation computation and enforce the format there:
to_char(:P2027_YOUR_ITEM,'fm999G999G990D00')Maybe this helps!
Brgds,
Seb
Edited by: skahlert on 11.02.2011 07:53

FCP X doesn't display iMovie clips correctly in Event Library

I have 10 years of clips that are setup by year/date in iMovie. Although I had imported most of the media in 2009, iMovie seems smart enough to read the actual file metadata and find the media recording date, which is prior to the import date. As a result, the clips are diplayed correctly in iMovie Event by Year/Month of actual recording.
However, the Event Library in FCP X doesn't do that at all and lists the events by "Content Creation" date, which is simply reads from the system file date, and NOT the recording date that is embedded into the file.
Bottom line is that Event Library is semi-useless as it doesn't all at display my clisp in the correct order, unlike iMovie that was doing it correctly.
Any ideas?

I went into Finder and discovered that FCP X created a directory structure where the files are in the correct Year/Month directory structure (as an exact mirror directory structure as the iMovie one), so it's even more weird that the Event Library doesn't display the events correctly???

Bank transfers: the file DME doesn't display the name of the company

Hi all,
In the DME file created by t.code F110, the record 20, doesn't display the name of the company which orders the bank transfer.
Where should I put it?
Thanks

Neeraj,
Its ECC6.0 and I upload the file by going into their website and putting userid and password and then upload the fiel over there and click send.Is there any possibility the file contains any hidden characters which we dont see? where should I send you dummy file whats your email id.
Regards
Shaun

[SOLVED] urxvt doesn't display correctly some special characters

Hello everyone,
I have a weird issue with urxvt. For some reason it doesn't display correctly some special character.
Here is a comparison between xfce4-terminal and rxvt-unicode (I used theses characters as exemple):
xfce4-terminal :
urxvt :
And here is my .XDefaults file (without the color and the plugin part, since it's unrelevant):
!Font
URxvt.font: xft:PragmataPro:pixelsize=11:antialias=false
!General
URxvt.scrollBar: false
URxvt*imLocale: fr_CH.UTF-8
URxvt.saveLines: 5000
URxvt.geometry: 95x26+50+50
Has someone an idea what the problem could be?
Thank's in advance.
Last edited by mwm (2013-11-13 13:15:48)

This is what I think is happpening.
PragmataPro may not contain those glyphs. It appears to have a wide array of glyphs but it is not unicode complete.
Xfce-terminal is a vte terminal. When a glyph cannot be found in the desired font, it will find the glyph in the 'closest' font. Urxvt will only use the glyphs in the font or fonts specified. If PragmataPro does not contain the glyphs, urxvt will display boxes.
You can give urxvt a series of fonts to search. It will search for a glyph through the listed fonts in the order you specify. Here's an example from my urxvt configs:
urxvt*font: xft:DejaVu Sans Mono:style=Book:antialias=false:size=8, \
xft:WenQuanYi Bitmap Song:size=8, \
xft:FreeSerif:style=Regular, \
xft:unifont:style=Medium:antialias=false
I couldn't use FreeSerif or unifont as a main font, but for an occasional glyph, it works for me. This file, http://www.cl.cam.ac.uk/~mgk25/ucs/exam … 8-demo.txt, can be displayed in urxvt correctly, with only a few unknow glyphs showing as boxes in the Amharic section.

Display records in JSP

I am completely stuck at this point and need urgent help.
here is what i have done till now:
i have one jsp page called first.jsp which displays records in RowsetBrowser from View Object A.
The attributes are ID,name,Location.
in View Object A i have added a transient attribute to which i have given an expression
as: ''| |ID| |'', i want to make the id as a link to the edit page,
i do not want an additional column to show up as link,hence i am not using addTextUrlColumn method.
now on clicking on this id,edit.jsp page is called and the parameter p which is the id is passed to
edit.jsp page.
The edit.jsp page is based on another View Object B.
the code is as follows:
String param=request.getParameter("p");
oracle.jbo.html.databeans.RowsetNavigator rsn;
rsn=(oracle.jbo.html.databeans.RowsetNavigator) new oracle.jbo.html.databeans.RowsetNavigator();
rsn.initialize(application,session,request,response,out,"NTS_NTS_NTSModule.LogPanelView");
rsn.getRowSet().getViewObject().setWhereClause("ncc_log_id="+param);
rsn.getRowSet().getViewObject().executeQuery();
The results of above query is only one record,which is right.
my job is now to display all the attributes of the above record,in text fields or
combo boxes.

Hi Monali,
If I understand your attribute Number1 (and Number 2) is one string value (varchar2 type, long type etc. in Entity) which include in self more different values (other strings or numbers). Right? You can do this if you parse string with an method which analyse that string and give you all the values in an array. Then you can display all the values just like you display other attributes. Off course between the values within attributes value must exist an sign (;, |, ^ etc.) which separate one value from another.
Format is:
SignValue(1)SignValue(2)SignValue(3)SignSignValue(maxData)Sign
(e. g.)
Format 1:
|Ad45gt63e4|34f5t55B4|3d563H6a2|5G67sE3h7||d45fgh5|
First sign (|) in the string is separator between the values
Format 2:
;Friday;September 07;2001;Baker Street 21b;LONDON;Europe;;JSP;12345678;EJB;
First sign (;) in the string is separator between the values
I write one demo application (Parse) which you can see in listing 1: Parse.java (see below). Maybe isnt the best solution for this problem but working :-)(compile and run from java console)
In your case code maybe look like in listing 2: BrowserBean.java (see below)
I hope this help you...
Veso
Note: Sample code in listing 2 I write from my head (without testing), so maybe has errors.
Parse.java
public class Parse {
public static String CheckValue(String strValue){
int strEnd;
char strSign = strValue.charAt(0);
strEnd = strValue.indexOf(strSign,1);
strValue = strValue.substring(1, strEnd);
return strValue;
public static void main(String[] args) {
final int maxData = 100;
int sAllValues;
String sEmpty = "";
String[] sAllValuesNumber1 = new String[maxData];
String sValueNumber1 = ";Friday;September 07;2001;Baker Street 21b;LONDON;Europe;";
try {
sAllValues = 0;
while (sValueNumber1 != null && !sValueNumber1.equalsIgnoreCase(sEmpty) && !sValueNumber1.equalsIgnoreCase(sValueNumber1.substring(0,1))) {
sAllValues++;
sAllValuesNumber1[sAllValues-1] = CheckValue(sValueNumber1);
System.out.println(sAllValuesNumber1[sAllValues-1] + "\n");
sValueNumber1 = sValueNumber1.substring(sAllValuesNumber1[sAllValues-1].length() + 1);
} catch(Exception ex) {
throw new RuntimeException(ex.getMessage());
BrowserBean.java
package demobeans;
import java.io.PrintWriter;
import java.io.OutputStream;
import oracle.jbo.*;
import oracle.jbo.html.databeans.*;
public class BrowserBean extends oracle.jdeveloper.html.DataWebBeanImpl {
public static String CheckValue(String strValue){
int strEnd;
char strSign = strValue.charAt(0);
strEnd = strValue.indexOf(strSign,1);
strValue = strValue.substring(1, strEnd);
return strValue;
public void render() throws Exception {
final int maxData = 100; // number of values for attributes (Number1 or Number2)
int sAllValues1;
int sAllValues2;
String sData = null;
String sEmpty = "";
String sQuery = request.getParameter("id");
String sValueID = null; // if is ID column1 in ViewObject
String sValueName = null; // if is name column2 in ViewObject
String sValueNumber1 = null; // if is name column3 in ViewObject
String sValueNumber2 = null; // if is name column4 in ViewObject
String[] sAllValuesNumber1 = new String[maxValues];
String[] sAllValuesNumber2 = new String[maxValues];
Row[] drows = qView.getAllRowsInRange();
AttributeDef[] dattrs = getDisplayAttributeDefs();
for (int rowno = 0; rowno < drows.length; rowno++) {
for (int j = 0; j < dattrs.length; j++) {
if (!shouldDisplayAttribute(dattrs[j]))
continue;
if (drows[rowno] != null) {
Object attrObj = drows[rowno].getAttribute(dattrs[j].getIndex());
if (attrObj != null) {
sValue = attrObj.toString();
switch (dattrs[j].getIndex()) {
case 0 : sValueID = sValue; break;
case 1 : sValueName = sValue; break;
case 2 : sValueNumber1 = sValue; break;
case 3 : sValueNumber2 = sValue; break;
sAllValues1 = 0;
while (sValueNumber1 != null && !sValueNumber1.equalsIgnoreCase(sEmpty) && !sValueNumb er1.equalsIgnoreCase(sValueNumber1.substring(0,1))) {
sAllValues1++;
sAllValuesNumber1[sAllValues1-1] = CheckValue(sValueNumber1); // put values from Number1 in an array
sValueNumber1 = sValueNumber1.substring(sAllValuesNumber1[sAllValues1-1].length() + 1);
sAllValues2 = 0;
while (sValueNumber2 != null && !sValueNumber2.equalsIgnoreCase(sEmpty) && !sValueNumber2.equalsIgnoreCase(sValueNumber2.substring(0,1))) {
sAllValues2++;
sAllValuesNumber2[sAllValues2-1] = CheckValue(sValueNumber2);
sValueNumber2 = sValueNumber2.substring(sAllValuesNumber2[sAllValues2-1].length() + 1);
sData = "Name:" + sValueName + "";
sData += "Number1[1]:" + sAllValuesNumber1[0] + " Number1[2]:" + sAllValuesNumber1[1] + ... + " Number2[sAllValues1]:" + sAllValuesNumber1[sAllValues1-1] + "";
sData += "Number2[1]:" + sAllValuesNumber2[0] + " Number2[2]:" + sAllValuesNumber2[1] + ... + " Number2[sAllValues2]:" + sAllValuesNumber2[sAllValues2-1] + "";
out.print("Other HTML code...") // other elements for your look and feel
out.print(sData);
out.print("Other HTML code...") // other elements for your look and feel
releaseApplicationResources();
null

BPEL Control in SOA Suite 10g doesn't display BPEL Process deployed in jdev

Hello,
I've created a directory in C:\ as Examples for my demo BPEL Projects.
After deployment is successful using Jdeveloper, BPEL Control in Oracle Application Server 10g doesn't display the BPEL process in Dashboard. This is possible only if I have my BPEL Projects placed under /jdev/mywork folder or I have to click on "Deploy New Process" and select the jar file from /bpel/output directory.
How do I make BPEL control to look for the deployed bpel jars by default in C:\Examples folder?
Help appreciated!

bpel control won't look at those locations when you have deployed a bpel process
after deployment it will unpack the jar in some tmp location in your domain
i'm sure what you mean with those 2 locations, they both have nothing to do with a deployed version of your bpel.
jdev will generate the jar for you and after that it will be deployed to the application server. After that the jar isnt needed anymore in your jdev workspace, it's already on the server itself

XMP doesn't display proper info in Photoshop CS2 for Mac.

Dear List members:
I have just recently installed Creative Suite CS2 and begun to explore the functionality of XMP. After purchasing Bruce Fraser's book on Camera Raw for CS2, I downloaded Metalab (Pound Hill Software) and created my first custom XMP panel that can be seen under the file info in Photoshop when an image (digital photo) is open.
The problem is that I noticed a few odd things and began to question myself if there is some kind of bug or a problem with my installation of CS2.
1. The window that opens under the file info command has several categories of information on the left to be chosen from, in the following order:
(1)Description, (2)Camera Data 1, (3)Camera Data 2, (4)Categories, (5)History, (6)IPTC Contact, (7)IPTC Content, (8)IPTC Image, (9)IPTC Status, (10)Adobe Stock Photos, (11)Origin, (12)Advanced
The Camera Data 1 option when selected opens a panel in the file info window that seems to contain all the information it is supposed to contain. The Camera Data 2 panel, on the other hand, doesn't display any information at all. Although the fields are there, they are empty. The fields are:
(1)Pixel Dimension X and Y, (2)Orientation, (3)Resolution X and Y, (4)Resolution Unit, (5)Compressed Bits per Pixel, (6)Color Space, (7)Light Source, (8)File Source.
All these fields are empty but when looking at the same file under Bridge the information is there, displayed under the metadata menu.
This is something I noticed "before" installing Metalab so I know it is not a compatibility issue generated by the installation of the software.
After installing CS2 I noticed that CS1 remained installed in my system. The version I purchased of CS2 is the upgrade one. Since I have no use for CS1 as I am now totally converted to CS2, I would like to uninstall CS1. The following are some of the questions I have:
1. How can I uninstall CS1 without causing any problems to my installation of CS1 ? Is there an uninstall utility with the software or will I have to uninstall the entire package manually ?
2. My G5 came with only one internal 160 GB drive where I originally installed CS1. I then purchased another internal 400 GB HD and copied the original drive onto it. This week I am going to replace the original 160 GB drive with a second 400 GB drive so that I can do regular "mirror image" back-ups between the two drives. Shold I expect any problems as I remove the drive where I originally installed CS1 ? Since I used disk utility to "copy" the 160 GB drive onto the 400 GB drive, my understanding it that any Adobe software key or authorization was also transferred to the drive. Is this right ? In case it hasn't, how can I transfer this information so that after I remove the 160 GB drive I will not experience any problems when trying to run CS2 ?
3. How can I fix the problem with the Camera Data 2 panel under the file info window and command ? I noticed that the folder that is supposed to hold the Custom File Info Panels (HD>Library>Application Support>Adobe>XMP>Custom File Info Panels) has files for CS1 and CS2. Could this be a problem ? There many more files with .dat extenson than there are with the .txt extension. Bruce Fraser specifically says that the ones with the .txt extension are the ones that hold the XMP templates for information related to the image files. The files I have in this folder with the .txt are:
(1)Camera1_CS2.txt , (2)Camera1.txt , (3)Camera2_CS2.txt , (4)Camera2.txt , (5)Categories.txt , (6)History.txt , (7)IPTC_Contact.txt , (8)IPTC_Content.txt , (9)IPTC_Image.txt , (10)IPTC_Status.txt , (11)StockPhotoInfo.txt
The only ones that have two separate files one each for CS1 ad CS2 are Camera 1 and Camera 2. Camera 2 seems to be the only that is now non-functional. What should I expect to happen if I were to manually uninstall the ones that relate to CS1 ? Could that cause any problems ?
My apologies for the long post but I didn't really know how to make it shorter.

The Photoshop and/or Bridge forums would be more likely places to get answers to your questions. This forum is inhabited more by programmer types interested in implementing the XMP specification in applications we write.
I'd expect CS2 to ignore CS1 panels so I doubt that's the issue. Panels don't interfere with each other--they just offer different views of the data. In any case, move the extra panels to your desktop and see what happens.
As far as I know, all you need to do on the Mac is drag the CS1 application folder to the trash to uninstall it.

Mac Mini Doesn't Display through Philips Tube HDTV

I have a Philips tube HDTV with a VGA connector in the back, and used the DVI-VGA connector that came with my new Mac Mini to connect. I don't have a computer monitor at home. The TV doesn't display anything.
So then I took the Mac Mini over to a friend's. He has a VGA monitor, and so he ran the Mac Mini through setup and set it to the lowest possible display settings. I came back here, rebooted and plugged it back in; still no display.
Then I tried this:
"First thing to try is to boot the mini into safe mode by holding down the shift key as it boots up. This should allow it to boot, and then give you access to the display preference pane to adjust the settings back to those that worked.
If that doesn't work, try disconnecting the TV, and rebooting the Mac with no display attached. Once it has fully booted and enough time has passed to allow the desktop to be displayed, reconnected the TV. This should force the mini to boot into a low-res mode that works with just about anything, then when you reconnect the display, either cause it to auto-sense the correct resolutions, or give you access to display preferences."
This didn't work either. Any suggestions?

Hi Alan,
Check your TV manual to see what resolutions your VGA/RGB connector on your TV will accept. Being a HDTV it is likely to be from 480p to at least 1080i.
You then set the resolution in your Display preference pane to 640x480 and you should get a picture on your TV. The trick is to set it when you can't see anything! Attaching to another device may not help because the Mac detects that device when you set the Display and will know its not that when attached again to your TV. When attached to your TV it is setting another resolution it thinks will work. It is clearly guessing the wrong screen resolution when you do connect it.
I overcame this situation myself using a VNC client. That requires you to have another computer you can use to control your Mac Mini via VNC. You can then access the Display pane via VNC and set the 640x480 resolution which will work.
For setting 1080i (and the VNC process) please see:
http://www.macosxhints.com/article.php?story=20060319073027371&query=1080i%2BMac %2BMini
I am guessing you can also use an S Video adapter - available from Apple - to connect to an S Video port your TV may also have. That won't help with the VGA connection though.
Hope this helps.

WEB.SHOW_DOCUMENT sometimes doesn't display the generated PDF file

Hi all,
I'm using the following code to generated my report from Forms: 
V_REPORT_ID := FIND_REPORT_OBJECT(V_REPORT_NAME);
V_REPORT_SERVER_JOB:= RUN_REPORT_OBJECT(V_REPORT_ID,P_LIST);
 V_JOB_ID := substr(V_REPORT_SERVER_JOB,length(:GLOBAL.REPORTS_SERVER)+2,length(V_REPORT_SERVER_JOB));
 V_REPORT_STATUS := REPORT_OBJECT_STATUS(V_REPORT_SERVER_JOB);
LOOP
 IF V_REPORT_STATUS = 'FINISHED' THEN
 V_TMP_PDF := :GLOBAL.APACHE_HTML_FOLDER ||'rpt'|| V_JOB_ID ||'.pdf' ;
 COPY_REPORT_OBJECT_OUTPUT(V_REPORT_SERVER_JOB, V_TMP_PDF );
 WEB.SHOW_DOCUMENT(:GLOBAL.AS_HOME_URL || 'rpt'|| V_JOB_ID ||'.pdf' ,'_BLANK');
 END IF;
END LOOP; 
Everything works fine except the WEB.SHOW_DOCUMENT part. In some clients, this command does what it required from it and opens a new browser window with the PDF report displayed on it. In some other clients, this command does nothing: now window dispalyed. When I refer to the Application Server, I see the PDF report successfully generated there. When I put the URL of the generated report manually in the browser address, I can see the report.
 
Why the WEB.SHOW_DOCUMENT doesn't display the generated PDF report in some clients?

I agree with the previous 2 posters.
Also firefox and ie handle it differently. Make sure you test on what your clients use.
Sometimes acrotray.exe is completely retarded and doesn't work.

MSI 970a-g46 motherboard starts up but doesn't display anything.

Hello, I'm having problems with a new motherboard I got from Amazon, specifically the 970a-g46. The following are my specs in use with this motherboard:
CPU: AMD Phenom 2 x4 965
GPU: nVidia GeForce 560 GTX
Ram: 8gb Kingston HyperX Fury 1866mhz.
PSU: Corsair 650TX (650 Watts)
Compatability-wise, everything checks out so I wasn't expecting problems at first. All the other parts excluding the ram I've used before. Here's exactly what happens:
I power up the computer after everything is installed and connected. The 4 phase LEDs turn on which tell me the CPU is powered up and working (so I assume). I don't get any beeps or buzzs mainly because I don't see any speaker/buzzer on this board. The monitor blinks and while it is connected to my GPU, it doesn't display anything, it's just a black screen. I can leave it on for a few minutes and I'll still not see anything happen. An important observation here is that my keyboard which has LEDs will turn on after a short period of time in boot-up (with my older set-up that is). This does not happen ever regardless of how long I leave my computer on on this new mobo.
I've gone over and checked/tested numerous things:
* The PCI-E and ATX cables for the GPU, motherboard and CPU are all connected and secured (I've tried both 4-pin and 8-pin connections for the CPU, neither help).
* I've tried jumping the CMOS multiple times to no avail.
* I tested the ram on another computer and it worked just fine on that one.
* I've tested the motherboard without a GPU and it still does nothing (though I think that's because this motherboard doesnt have its own integrated GPU for some reason).
So far the only possible reasons why my computer is not working is because of my PSU (very unlikely as it's only a year old and it's a Corsair, which I've heard is very reliable in the long-run), GPU (It is quite a few years old but even without the GPU my computer still doesn't go past boot-up), CPU (possible due to its age and how many freaking time I've reseated it (probably around 8 times) so I wouldn't doubt it, but before I put it into this motherboard I did check its pins and they were all there and placed nice and smoothly into the socket.) and finally the motherboard (it's possible that this is just a defected motherboard and giving me a super hard time which would be a first in all the years I"ve spent computer building).
The best case scenario of course is me giving some kind of oversight to how I transferred over the parts and connectors. I might've missed something obvious to please any advice/insight on how I can solve this problem would be greatly appreciated
EDIT: Some other things I did but forgot to mention:
* Checked ground nut things and ensured they matched the specifications of the motherboard ATX; only 6 are under the board and each one is aligned up with the holes on the board as designed.
* Tried booting up without powering the CPU. Only one phase LED light came on, still the same problem (for an obvious reason this time now).
* Re-seated GPU multiple times, re-connected cables multiple times.
What I have NOT done is re-seat the CPU because I am almost out of acetone so I would need to get another supply of that which won't be until tomorrow. I also have not re-seated everything back on my older motherboard to check if it still works. Tomorrow I'll most likely do that and if I find that the old motherboard works flawlessly then that tells me that the new motherboard I got is either defected or there's some compatability issue I"m missed out on.
EDIT 2: Just found a speaker and plugged it into the motherboard. Booted it up and I got no beeps whatsoever. So this mobo is giving me no video activity (there is a signal it's just blank), and no beeps from the motherboard. I have no idea what that could mean at this point.
EDIT 3: I decided to test a few things with the new speaker I just got. First I removed ram and tried running, I got 3 beeps which I assume is the beep sequence of faulty/no ram. Removed the power to CPU and the GPU itself individually, gave no beeps this time.

Quote from: rhradacut on 06-January-15, 16:49:14
What's the serial number of your MB? Needed to determine what BIOS may be on the MB. Exactly which version of the CPU is it? There were several different 965 CPUs and they required different BIOS versions, 1.2, 1.9,2.2 depending on which CPU you actually have.
Also another problem may be that native memory supported by your CPU is DDR3-1333, not 1866
None of the supported CPUs have integrated graphics, any MB graphics would be in the chipset, not CPU. Examples would be 785G, 880G
Thank you very much rhradacut! The problem was that the mobo for whatever reason was forcing 1866mhz on my CPU when it only supported up to 1600mhz. I had to install a spare ddr3 module to downclock it so that I could access the BIOS and manually set the DRAM timing to 1600mhz for it to work. That's a very strange problem that I figured would've been auto-resolved by the hardware, and would also be a big problem if I didn't have any spare DDR3 ram to work with.
Once again thanks for helping out on solving my problem.

Filter on a Report to display records only from last 12 months

Hi Folks,
I have a requirement where I have to display Records for last 12 months. Following is the Filter that I am using
Opportunity."Close Date" >= TIMESTAMPADD(SQL_TSI_MONTH, 0, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE)-1), CURRENT_DATE)) AND Opportunity."Close Date" <= TIMESTAMPADD(SQL_TSI_MONTH, 12, TIMESTAMPADD(SQL_TSI_DAY, -(DAY(CURRENT_DATE)), CURRENT_DATE))
But this is showing me records for next 12 months.
How can I solve this Issue??
Thanks and Regards,
Amit Koul

Dinesh,
The filter that you suggested works for last 365days, if you try to create a simple report with just Date field in it, you will come to know the difference.
Using the filter suggested by you it will show me records from 27th Jan 2008 since today the date is 27th Jan 2009.
I want it to filter records for last 12 months including Jan 2009.(so the interval comes to be Feb 2008 to Jan 2009)
Hope I made sense!!
Thanks and Regards,
Amit koul
Edited by: Amit Koul on Jan 27, 2009 7:27 PM

How can I display records quickly in order, using set_block_property

Hi all,
I want to display records in order when I click on button corresponding to that filed.I'm getting result by using set_block_property..but it is displaying records slowly,if number of records are more then it's taking more time to sort the records.
I have written the following code in when-button-pressed trigger:
begin
if get_block_property('block_name',default_where) = 'column_name ASC' then
set_block_property('block_name', default_where,'column_name DESC');
else
set_block_property('block_name',default_where, 'column_name ASC');
end if;
end;
How can I get the result quickly can anyone please give me an idea to solve this.
Thanks in advance.

Hi user;
I want to display records in order when I click on button corresponding to that filed.I'm getting result by using set_block_property..but it is displaying records slowly,if number of records are more then it's taking more time to sort the records.
I have written the following code in when-button-pressed trigger:
begin
if get_block_property('block_name',default_where) = 'column_name ASC' then
set_block_property('block_name', default_where,'column_name DESC');
else
set_block_property('block_name',default_where, 'column_name ASC');
end if;
end;
How can I get the result quickly can anyone please give me an idea to solve this.Did you try to use index for related column? Also did you try to use order_by instead of default_where
If its not help, I also suggest post your issue on :Forum Home » Developer Tools » Forms
Hope it helps
Regard
Helios

Display records according month

hi all.
i want to display records according months.
i created view something like this.
create or replace view month_timer (item1, amount,item_date) as
select item1,sum(amount),item_date
from table
where trunc(item_date) between to_date('01-jan-2010') and trunc(sysdate)
AND item_TYPE!=4
group by item1,item_date
ORDER BY item_dateany suggestions?
sarah

create or replace view month_timer (item1, amount,item_date) as here in this statement you are using item1 and only tree columns.
select pcd_plt_id,pcd_cbr_id ,sum(amount),item_date And here in this statement there are four columns. So which column is for item1
group by item1,item_dateHere you can use only selected columns in group by. But you are using item1 which you used above for view.
And in select there are three columns without aggregate function. And you are using only two here.
If you could post the table data and desired output. Then it will be easier to find better way.
-Ammad

Picklist Demo doesn't display records

Similar Messages

Maybe you are looking for