Picklist Descriptions not reflected

Hi,
I modified some of the Picklist descriptions for 2 Picklists already present on the Account detail object. When I generated a report including these 2 Picklists only their old descriptions are being displayed and not the newly modified ones. This report was generated against Real time data - also over 24 hours has passed since this was modified. Any inputs on this issue would be appreciated.
Thanks,

Hi Hussien,
For your information, it is Release 12.1.1, db version is 10.2.0.4 and platform version is Oracle Solaris on SPARC (32-bit).
The article that you have provided does not applicable. This is only happen to the Cost Center LOV in the picklist which does not reflected even there is no end date in Value Set maintained.
Please advice. Thanks.
Regards,
CF

Similar Messages

LOV in Picklist is not reflected with Value Set maintained.

Value set A is contained the latest/updated list of Responsibility Center. Wheres one of the Picklist in Employee Self Service(OTL) which showing the lists of Responsiblity Center which query/calling the values maintained in Value Set A. However, the list of values does not contain the latest information which being maintained in Value Set A. On the other hand, when query from backend table for the Picklist function, the updated value in Value Set A is there.
Additional Infomation: Apache and application was bounced but the result still the same.
Please advice. Thanks.

Hi Hussien,
For your information, it is Release 12.1.1, db version is 10.2.0.4 and platform version is Oracle Solaris on SPARC (32-bit).
The article that you have provided does not applicable. This is only happen to the Cost Center LOV in the picklist which does not reflected even there is no end date in Value Set maintained.
Please advice. Thanks.
Regards,
CF

Keys and Join description at physical layer does not reflect in BI Answer?

Hi All ,
While creating a RPD , the description about keys and join information using
description and hint property which we define at physical layer, those informations do not reflect BI Answer when i query to metadata dictionary.
Any ideas in this regard?
-- Ashish

Hi All ,
Here i give little bit more description what i did.
(1) I created a RPD and gave some description about Foreign Keys and using hint a gave some description about Physical joins.
(2) After then using utilities I generated the Metadata Dictionary.
(3) Now after restarting of services when i query to Metadata Dictionary using BI Answer , i am not able to see those descriptions. Rest of the information like table level and column level descriptions i am able to see.
Is there any way to get these descriptions or metadata dictionary does not keep descriptions for keys and joins?
Any ideas in this regard??
--Ashish

Description changes not reflecting in User Decision step

Hi,
I am displaying the ECM (cc01) description in the workflow user decision step. In this user decision step I do have three options
    1. Changes completed (to move the ECM to next level)
    2. Edit ECM (Calls ECM n change mode CC02)
    3. Cance (standard)
If I choose Edit ECM, and change the description in the ECM and come back to the user decision step, it still shows the older description some cases. In some cases I am getting the updated description in user decision step. In Edit ECM step I am using Z method which is the copy the standard BO method Edit_synchron of ECM to call the transaction CC02.
Z method does not contain any importing or exporting parameters. Also in the workflow<->Task binding I bound ECM <-> _WF_Object_ID.
Thanks,
Muruganantham

2 case:
1.) Description not changing: How the description get populated in user decision step ? Is it some varibale get populated based on select query ?
2.) Description get changed: Please check the new workflow instance get created and you can only see changed text in new instance. Already triggered workflow will not show the changed value.
Please check the worklow design, whether its creating new workflow instance on every change in ECM ?
BR,
Prakash

SAP BI CKF,RKF descrptions are not reflecting in the universe

Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh Ambati

Hello Jagadeesh,
I recommend to post this query to the [Integration Kits - SAP|BusinessObjects Integration Kits; forum.
This forum is dedicated to topics related to the BusinessObjects Integration Kit for SAP.
It is monitored by qualified technicians and you will get a faster response there.
Also, all SAP Kit queries remain in one place and thus can be easily searched in one place.
Thanks a lot,
Falk

SAP BI RKF,CKF Descrptions are not reflecting in the universe

Dear Gurus,
I have couple of questions
1.I have created a BI quey with 2 calculated keyfigures and 2 Restricted keyfigures. When i am creating a universe on top of the BI query, Desrptions for Calculated and Restricted keyfigures are not reflecting in the universe, Rather the universe is showing UID(unique ID)'s of the CKF and RKF.
To get the descriptions into the universe, Do i need to do any settings?
2. In one of the documents I have read that we have to create one universe for one language if i want to see the report in Multiple languages. if it is so,
Do i need to create universe in each and every language or is there any option that i can create the universe in one language and replicate into the required languages?
Please help.
Thanks and Regards
Jagadeesh Ambati

Hi ingo,
do you see the desriptions in items like the RSA1 ? - I can able to see the descrptions of Calculated keyfigure and Restricted keyfigure in the query designer and as well as in Bex analyzer.
did you use the same language when building the universe connection ? - Yes I have created the connection and universe in English Language.
Thanks and Regards
Jagadeesh Ambati

Transactional Replication: Alter view changes are not reflect on Subscription database

Hi All,
we are configured transactional replication in our environment on sql server 2008 R2 , Yesterday I made a view alter on publisher database the view also present in replicated articles but unfortunately the changes not reflect in subscription, I already have
checked the : Replicate Schema change option in Subscription option its also true, there is not latency exist in replication monitor , i have checked the blocking on subscription and publication. one more thing I tested the changes on replicated table its
working fine
Please help me to fix the issue.
Regards,
Pawan Singh
Thanks

Hi Pawan,
According to your description, the alter on the view in publication doesn't be reflected in subscription database. As my analysis, the issue could be caused by that the distribution agent job doesn’t run after altering the view.
I make a test on my computer, and set up transactional replication to replicate tables and views. Firstly, when creating subscription, I set the distribution agent job ‘Run continuously’(as the screenshot below), and alter the view in publication database,
then the change is successfully reflected to the corresponding view in subscription database.
However, I also make another test with setting the distribution agent job ‘Run on demand only’(It is determined by you), and find that it is not reflected to subscription database unless I run the distribute agent job manually.
The distribution agent is used to read the updated transactions written to the distribution database and applies the change to the subscription database, so please check if your distribution agent job runs after you alter the view. If not, please run the
job and check if the issue still occurs.
Regards,
Michelle Li

Data element description not changing in ALV output

Hi Friends
I changed the description of the data element from xx to yy,but this is not reflecting in the alv output,
It is still showing xx,After activating everything and running the report I get the same problem,
Can any one help?

Hi,
Write your code in following manner.
ATA:ist_fieldcat TYPE slis_t_fieldcat_alv WITH HEADER LINE.
DATA: wa_fieldcat LIKE LINE OF ist_fieldcat.
DATA : l_pos TYPE i VALUE 1.
ist_fieldcat-fieldname = 'POSID'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 24.
ist_fieldcat-col_pos   = l_pos.
* ist_fieldcat-ddictxt = 'L'.
ist_fieldcat-key = 'X'.
ist_fieldcat-seltext_l = 'Appropriation Request Number'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
l_pos = l_pos + 1.
ist_fieldcat-fieldname = 'TXT04'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 4.
ist_fieldcat-col_pos   = l_pos.
ist_fieldcat-ddictxt = 'L'.
* ist_fieldcat-key = 'X'.
ist_fieldcat-seltext_l = 'Status'.
ist_fieldcat-EMPHASIZE = 'C400'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
l_pos = l_pos + 1.
ist_fieldcat-fieldname = 'UDATE'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 8.
ist_fieldcat-col_pos   = l_pos.
ist_fieldcat-ddictxt = 'L'.
ist_fieldcat-key = 'X'.
ist_fieldcat-seltext_l = 'Status Date'.
* IST_FIELDCAT-EMPHASIZE = 'C600'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
l_pos = l_pos + 1.
ist_fieldcat-fieldname = 'CRTD'.
ist_fieldcat-tabname   = 'IT_FINAL'.
ist_fieldcat-outputlen = 4.
ist_fieldcat-col_pos   = l_pos.
ist_fieldcat-ddictxt = 'L'.
* ist_fieldcat-key = 'X'.
    IST_FIELDCAT-EMPHASIZE = 'C700'.
ist_fieldcat-seltext_l = 'Status CRTD'.
APPEND ist_fieldcat.
CLEAR ist_fieldcat.
<i>Rewards point if helpful</i>
<b>Debjani</b>

New description not appearing in analyzer

Hi,
We have changed the description of two navigational attribute in the query and traported to production system. These changes are appearing in the query designer but not in analyzer when we execute the query.
We have trasported the query through overwirte mode also but chnages are not reflecting in production system.
We are facing same problem in the web portal as well.
Any pointer on this is highly appreaciable.
Thanks,
Meghana

Hi
Coudl you check if the master data of the navigational attributes in teh production system has texts along with the Key.
If yes, open the query in Analyzer and select the navigational attribute and dispaly teh Properties>General Tab>Display and also check the Text Type.
In the Wed also try to display the Text instead of Key.
Regards, Hyma

IMG HPF Area Page Customizing not reflecting in Portal

Hi,
I'm near to smashing my keyboard, but before I do so, maybe someone is able to help me:
In IMG Homepage Framework I've got a custom Area Page which has a Headline Area Description and an Area Description Longtext. I need to change the contents of these two fields. If I change the Headline Area Description, it reflects in Portal right after relogging. If I change the Area Description Longtext it still shows the old Area Description in portal. This is not supposed to happen and it never happened before.
Backend System: NW 7.01 Stack 8 ECC 6.00 EHP4 SP36
Portal Server: NW 7.01 Stack 9, All respective XSS Java Components and Business Packages Updated to EHP equivalents
I direly hope this is not due to the difference in Stacks ( Backend 8 - Frontend 9 ).
Portal cache has been cleared and portal has been restartet, without any effect.
Any ideas?
regards, Lukas

I haven't used external entries. From the Document you provided however, I take it, if I used one, I could just override the "bugged" Long description with an html file.
UPDATE/EDIT: When I create a HTML File in KM Content and pack it into a Ressource for external Linking in the Area Page. It does reflect, but looks horrible. If I remove the external entry again and keep the description long field blank. The old text reappears in ESS...
I looked through all the relevant tables in SE11/SE16 the entries in IMG do reflect; just not in ESS.
Aside from this workaround. Any other ideas why my problem occurs?
regards, Lukas
Edited by: Lukas Weigelt on Aug 17, 2011 11:39 AM

IRC_VIS_QUICK_SEARCH message option is not reflecting in Job search

Dear all,
In out IRec Page we have changed the message for job search description under IRC_VIS_QUICK_SEARCH message and bounced the apache. But the change is not reflecting. Please help.
We are using E-Biz R12.1.3 on 11g.
Regards,
Charan

Hi,
We have configured DMZ for external access to IREC page. Now the message that was set in IRC_VIS_QUICK_SEARCH is reflecting in internal IREC site http://internalsite/OA_HTML/IrcViitor.jsp but it is not reflecting in external site http://externalsite/OA_HTML/IrcVisitor.jsp. Please help.
Regards,
Charan

Metadata edited in Bridge is not reflected in the Info Dialogue Box, but shows up in Photoshop.

Metadata edited in Bridge is not reflected in the Info Dialogue Box, but shows up in Photoshop.

Dear Ramón,
You are right that not all metadata is shown in the Finder info but in my case the once added in IPTC core do show as expected for most file types (but not CR2 raw). As you now I convert my CR2 to DNG for a long time now I had to look up the original Raw file and create the data for description, location, keywords again. The data you can add and alter yourself in the IPTC Core field. I added a series of screenshots showing different info and to my surprise (another reason to keep to DNG…) the Raw file had very less info and the xmp shows it all in a rather long and obscure way. Yet PSD, DNG and File info in PS show the same.
Could not recreate the Bridge metadata workspace from the OP because mine (Bridge CC) does not have the description field as an option anymore for some obscure reason. Also checked this in my CS6 version with same result, making the metadata workspace unusable but that was it already for a long time.
Still leaves us with the problem the OP showed, having all info in most files, as in Finder info, but not in Bridge. So could the OP respond to the purge cache for selection option in post 4?
Here are (a bit to many, sorry) my screenshots showing different file info (in Dutch but you will manage with that) and metadata in Bridge:
Finder info for PSD and DNG:
Finder info for CR2 and XMP:
File info Bridge / PSD:
And a Bridge Metadata view:

My WishList does not reflect current purchases

Ever since transferring my iTunes library from my PC to iMac, I have noticed that My WishList in iTunes store, while it lists all the previously "wished for" apps and songs, does not reflect which ones I have purchased. In other words, it used to be that the purchased apps were listed, and instead of a price it would just say "purchased." Now it just shows a price, as if I never purchased the app. Even when I open the app description in the itunes store, the price remains, as if I never purchased it. I have occasionally seen this happen when the iTunes store account took time to refresh the information it had, but this has been going on for several weeks.
Is there someway to "remind" my iTunes account of what purchases I have, so that my purchase history is correctly reflected? I've been using the same account the whole time, so I know that is not the problem.

Where did it show as a portable device? If in My Computer try:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
iTunes: Syncing media content to iOS devices and iPod

Change in one vairable is not reflected in the other variable

Question/ Objective / Doubt:
during the execution of the program ,change in the member/variable of the class is not reflected in the other variable which is the dependent variable of the previous one;
Program / code:
class Simple {
     static int [][] valOne;
     static int [][] valTwo; //values depends on ?a? values
     // static int [][] valTwo=Library.different(valOne); this doesn't work
     // static { valTwo=Library.different(ValOne); } // this doesn't fulfill what i expect
     Simple(int a[][]){
       valOne=a;
       ValTwo=Library.different(a); //say some static method
     void change(int r,int c,int n){
       //one of the ValOne is changed
       valOne[r][c]=n;
class Library{
     static int [][]different(int num[][]){
          //some computations
          return intArr;//returns a values with respect to the incoming variable
Description / Explanation:
during execution:
when change method is invoked to change valOne ; I want this change to be reflected in valTwo But this does not happen.....as valTwo in initialised only in the constructor
My Try / My Effort:
// static int [][] valTwo=Library.different(valOne); //this doesn't fulfill
// static { valTwo=Library.different(valOne); } // this doesn't fulfill
i declared variable as static so that this would solve the problem..
sorry if there any wrong in naming convention...
Jesh
Share knowledge; Grow together;
Edited by: java_jesh on Dec 14, 2007 2:02 PM

it seems u are scolding me . my above comment is after seen this program
// Demonstrate static variables, methods, and blocks.
class UseStatic {
static int a = 3;
static int b;
static void meth(int x) {
    System.out.println("x = " + x);
    System.out.println("a = " + a);
    System.out.println("b = " + b);
static {
    System.out.println("Static block initialized.");
    b = a * 4;
public static void main(String args[]) {
    meth(42);
output:
Static block initialized
x=42
a=3
b=12
i like to know more. that's why i am continuing even after the objective is solved
Edited by: java_jesh on Dec 14, 2007 3:27 PM

Universe export - data changes not reflecting in Report

Hi
The changes and the latest updates in the database are not reflecting in reports,
even if i export the universe again.
and i have refreshed the reports, that even not reflecting.
i did Edit query and Run query this action also not bringing the latest data to reports
why this happens ?
how to solve this issue ?
Regards
Dineshkumar

You can search for KB articles on SAP Service Market Place .
Here is first :
Symptom
You make changes a local Universe in Designer.
When refreshing the report, in Desktop Intelligence, the results do not reflect Universe update.
It used to be enough to simply refresh report's data, for Dataprovider to show object changes from the Semantic layer.
Change of behaviour in SP3 codeline: the DeskI Query Panel does not automatically pick up the latest modifications made to the local Universe.
Reproducing the Issue
Using BusinessObjects Desktop Intelligence XIR2 SP3:
Using your universe (eFashion), create and refresh a simple Desktop Intelligence report (.rep).
Make a simple change to the universe (like renaming a field/ object name) and save these changes.
Go back to the open DeskI report and try to refresh the data provider using: 'Data/Refresh Data'.
This will not show the latest changes.
However, if you follow the same workflow using XIR2 SP2, the universe update will be immediately visible (in the report) simply after refresh.
Cause
This is not a product regression, but intentional change in application's code delivered with FixPack3.1.
Fix Request ADAPT00818520 changed the application's behaviour: << When a restricted user is logged on to view a Desktop Intelligence document, prompt windows may be slow to open. >>
Resolution
In Desktop Intelligence menu, go to: Tools > Universes
Click 'Refresh'
Select and 'Import' your universe
Next, go to toolbar menu: Data > Edit Data Provider
In Query Panel, click 'Run' to regenerate the Query and interrogate the updated universe.
Only after following these actions will the .unv ammendments be visible in the report.
Here is second :
Symptom
Changes to object made for the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Desktop Intelligence (Deski) Report still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Row level Restriction is not applied correctly in InfoView(View Mode) when 'Allow selection of multiple Contexts' checked in the Universe Designer
Environment
BusinessObjects Enterprise XI 3.1 Service Pack 2 Fix Pack 2.6
Reproducing the Issue
Changes to object made in the Universe is not affected in InfoView(View mode) when 'Allow selection of multiple Contexts' is checked in Universe
1. Log in to Designer
i) Import Island Resort Marketing
ii) Go to Universe Parameter >> SQL
ii)Uncheck Allow Selection of Multiple Context
2. Create a new Desktop Intelligence(Deski) Report based on Island Resort Marketing
i) Drag the object Country in the Result's Pane
ii) Save and Export the report to the repository.
3. In Designer Change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'ddd'
Note: Uncheck Allow Selection of Multiple Context
ii) Save and Export the Universe
4. Log in to InfoView
i) View the report
ii) Refresh the report
iii) Changes to the object taken place i.e Country is concatenated with ddd
5. In the Universe Designer, change the Object Country under Resort from Resort_Country.country to
i) Resort_Country.country+'eee'
Note: Check Allow Selection of Multiple Context
ii) Save and Export the Universe
6. Log out from InfoView and login again
i) View the report
ii) Refresh the report
iii) Changes not taken place. Shows only Country instead of Country concatenated with eee.
Row level Restriction is not applied correctly in InfoView(view Mode) when 'Allow selection of multiple Contexts' checked for the Universe.
Import efashion Universe
Drag the Outlet_Lookup table into the objects pane on the left hand side
Create Row Level Restriction on the state field of Outlet_Lookup table as Outlet_Lookup.State=(u2018Texasu2019)
Apply the restriction to Administrator
Save and Export the Universe. Note: Uncheck Allow Selection of Multiple Context in Universe Parameter>>SQL
Log in to Desktop Intelligence (Deski) as administrator with Enterprise Authentication
Create a new Deski report
Drag the object state from the Outlet_Lookup table to the Results pane
Observed that the administrator is able to see only Texas which is expected behavior
Save and export the report
Log in to Infoview as Administrator
View the report. Refresh the report
Observed that the administrator is able to see only Texas which is expected behavior
Log in to Infoview as any user say Test User
View the report. Refresh the report
Observed that Test User is able to see all the states which is expected behavior
In the Universe Designer, Check Allow Selection of Multiple Context in Universe Parameter>>SQL for efashion Universe
Save and export the Universe
Log in to Infoview as Test user
View the report
Refresh the Report
TestUser is able to see only Texas which mean that the restriction is applied to Test User also
Cause
This is by Design as the 'Allow selection of multiple Contexts' forces selection of the context, which is not possible in Infoview, so that in Infoview it is assumed the Context is already selected and no SQL regeneration is required.
Resolution
Problem Description: Changes to object made in the Universe is not affected when refreshed from InfoView if we check 'Allow selection of multiple Contexts' in Universe Designer
Explanation:
If we modify an object and selects also the option 'Allow selection of multiple Contexts', it means that potentially there is more than one SQL that can be generated with the use of that object. Hence if a report is created in Deski, run and exported to enterprise, that means, one particular context (SQL) has been selected.
If you then update one or more of the objects again, the SQL will have to be regenerated in Deski for the right context to be selected for that particular report.
Therefore, if this option is used, for the objects to be updated, the SQL of the report will have to be regenerated in Deski, run and export it back to repository, then refresh the report in InfoView.
For Deski reports viewed in InfoView, it is not possible to evaluate the context on refresh. The report will always use the context stored with the report and same for the SQL. Therefore the Deski report will need to be imported locally, refresh it and then export it back to repository for the changes to take place.
Problem description: Desktop Intelligence (Deski) still prompts for selection of contexts even if 'Allow selection of contexts' is unchecked for Universe
Explanation:
The option 'Allow selection of Multiple Contexts' in Designer is not to disable the prompt. It will prompt you to select context if the object used is associated with context. The option is just to allow Deski to select multiple contexts at a time if in case the object used is associated with multiple contexts and accordingly generates the SQL.
However if we uncheck the option even if there are multiple contexts associated with the object used, it will allow selection of only one context at a time.
Problem Description: Issue with Row level Restriction when refreshed from InfoView with 'Allow selection of multiple Contexts' checked for the Universe.
Explanation:
We first have to regenerate the SQL in Deski, then export it to repository and refresh from InfoView for the changes to take place correctly. The explanation above applies.

Picklist Descriptions not reflected

Similar Messages

Maybe you are looking for