Picklist to show Storage bin

Hi Folks,
Picklist should show the storage bin from material master.
whats the tcode to check this ?
Thanks & Regards,
Raju.

Hi Raju,
in MMR - WM 1 view storage bin is available. Do you face any problem to pick this field?
or
Are you looking something different ?
what is the application type you are using for pick list - I guess its V6- Handling Unit
Regards,
ReazuddinMD

Similar Messages

CO27 is showing blank values in Warehouse,Storage Type and Storage Bin

Hi Gurus,
I am using CO27 to generate pick-list for a production order. The pick-list is being used by Warehouse team to Goods Issue for the Production Order.
However, the problem that I am facing is that in the pick-list generated from CO27 is showing blank values in Warehouse,Storage type and Storage bin.
So, it is becoming difficult for the Warehouse to do the picking based on this pick-list.
Could you please advice how the fields Warehouse,Storage Type and Storage bin can be populated in the Production Order pcik-list.
Is these values are fetched from Material Master data or any other place?
Thanks & Regards
Subhasis

Hello
You should implement the following note:
384427 - CO27/COIK: Storage bin is not displayed
BR
Caetano

Storage bin not getting cleared

I need your help on an issue regarding inventory block of a particular storage bin due to a material which is no longer existing in that particular bin and has already been consumed.
The user is able to create a new physical inventory document for all the storage bins but one.The only one which she is unable to clear is storage bin no. xxxxx.This particular bin is blocked and showing as inventory active against the old phy. inv. doc.
Looking into the Inventory tab of the bin display transaction, we would see 3 materials, out of which there is a material x which is no stock in that bin. While the other 2 materials y and z are not in Inventory active status. Hence, the only reason why the bin is still showing as blocked is due to material x
I tried using LS06 to unblock the particular bin xxxxx, but was unsuccessful in doing so.

Hi,
While creating JSP custom tags, we start from scratch by first creating tag handler class then .tld file for that and finally deploying both these files.
I am looking for a similar approach for making our own JSF component.
I don't want to put jsf-impl API into lib directory. Is it possible to make a simple component using jstl standard libraries ?
--Sushant

How to Unblock a Storage Bin With an Inventory Active Flag

Hi,
I have a storage bin that shows as being blocked by an Inventory active flag, but the inventory document has been canceled. I can't even view this document since it was canceled. Anyone have any suggestions?
Thanks,
Das.

Hi,
You should be able to click on the bin master data (click on bin # and go to inventory tab) and take the recent inventory doc # then go to li02 and delete the inv. doc. That will solve your problem.
You could also try LX22: Edit > Deactivate.
Reward points if found helpfull..
Cheers,
Chandra Sekhar.

Storage bin available when posting change is not confirmed completely

Dear Gurus, I have a question for you:
My costumer wants to do a posting change when the material is released from QM with a decision usage from Q to unrestricted use. The process is done in two steps: with LU04 the TO is generated and with LT12 is confirmed. When the TO is generated the position is half confirmed. With LT21 we can see the row for the ST (lets say ST 504 Open Storage type) and a second row 922 TR-ZONE. The first row appears green (as confirmed) and the second row appears red (Not confirmed).
My costumer says that " beacause of the strategy given for the storage entry, the storage bin released in the TO (not confirmed completely yet) is available at this moment.
If the storage bin is still physically full, the carrier will found not space for leaving the goods even SAP is telling him there is space available at this storage bin."
I have read that once yo start a TO the storage bin is blocked until the transaction is fully confirmed.
If this is correct I need to demostrate it and I don not find the way to do it.
I hope you understand my explanation and give me any clue.
I appreciate very much some help.
Al

agmogena wrote:
Ok, I will tell you the configuration I have. Lets point in a movement 921 quality to unrestricted use.
> Type Storage origin: 902 EQ and RC flags are set on. (confirmation control for storage type)
> Type storage TR: 922 are set on.
>
> Movement type 921 the flags for Confirm immed and Propose confirm are NOT set.
>
> I do a LU01 to create a intruction to change a material from Q to Unrestricted.
> with LT05 I create the TO.
> At this time if I look LT21 the TO created I see the tag source with two positions one for TS 902 green color and the second 922 in red.
> For the tag of target We can see the first position 922 In red and the second position 902 in green color.
>
> Perhaps this detailed explanation will help you to fully understand the scenario.
>
> Thank you again,
>
> Al.
From the above it isn't entirly clear that the first part of the T.O. is actualy confirmed, my settings are to autoconfirm this so I have no example to look at in my system. Perhaps the display shows the first line green before any actual confirmation..
I assume the stock status has not changed when you first view the T.O.? If the t.o. is partly confirmed I would expect to see the stock status changed and a neg in 922 until the second part is confirmed. Perhaps there is no confirmation at all yet, in LT21 what is the confirmation status? If you view the transfer order header there would be a partial confirmation showing with a yellow triangle, do you see this or no confirmation indicated at all?

INterim storage bin to unrestricted stock movemnet

Dear All,
I have a problem in warehouse management
Step 1 After the GR(65000 units) my system will automatically create a TR and TO to the quality inspection .
Step 2 will clear the inspection lot by giving a Usage decision through the T.code QA32 to move the stock from quality to unrestricted stock
step 3 But the stock will not be going to the unrestricted area instead it is going to the intrim storage type 922 TR-Zone.
Step 4 If i see in the LS26 i am able to see the stock for put away as 65000 units and pick quantity as 65000 units and the stock type as quality
So the stock is still in quality, if i see the PO also it is showing that the stock is in quality
How can i move this out of the interim storage bin
I am pretty new to WM kindly advice me how to go about this ,
Regards,
D vasanth

A PCN must have got created. Go to LU04, mtype 321, enter your material. It will display the PCN if any exists.
Select the PCN and create Transfer Order and confirm the TO

Report for storage bins

Hi gurus,
Is there any standard report to see the storage bins report .It needs to show the storage bin,Material Number and Quantity in that storage bin.
Please let me know is there such standard report.
Points will be rewarded
Its very very urgent... Please
Thanks in Advance...
Thanks and Regards
Siri..

Hi SIRI
U can sse tables MARD and LAGP for getting the report output with the above mentioned fields.

Storage bin Linkage

Hi,
We had done posting and valid documents are available and we can see the document showing the storage bin.
For a material , storage location can u please share the associated tables link or logic to get the data for pick the storage bin in out put report?
Regards,

Hi Mahesh,
You can link MARC & T001L on WERKS(Plant) to get Material & Storage location.
<b>Reward Points if this helps,</b>
Satish

Storage bin link- tables.

Hi,
We had done posting and valid documents are available and we can see the document showing the storage bin.
For a material , storage location can u please share the associated tables link or logic to get the data for pick the storage bin in out put report?
Regards,

material to storage location
MARA -- MARD
storage location to warehouse
MARD -- T320
Warehouse to storage type
T320 -- T301
storage type to storage bin
T301 -- LAGP
Stock is in table LQUA.

Storage bin not found (enter storage type) L3398

Hi,
We have an very critical issue. We have gone live on 14th , only one day before. Now our system is showing the message
"Storage bin not found (enter storage type) L3398.""
We have defined Open storage type in our system where , mix storage is allowed. There are 10 bins in this storage type. There is not capacity check for these bins. Now system is not searching bin from Open storage and we have stucked with TO creation. System is not allowing us to created any TO.
KIndly do the help
I will be very thankful if reply fast.
Regards,
Manish I

Hi MANISH,
Though there exists many storage bins , the system is not able to find these bins because proper storage unit type is not defined.
System identifies the destination based on the following criteria :
Activate Storage Type Search
Activate Storage Section Search
Activate Storage Bin Type Search
Go through the below customising for better understanding :
SPROLogistics ExecutionWarehouse Management--Strategies
Maintain the Warehouse Management 2 view of Material master with Palletization data .
Thanks,
Swamy H P

Do we need to create Storage Bins for each Client?

Hi,
I have defined the storage bin structure etc which I could transport.
But does the creation of bins (using LS01N) need to be done separately for each client? If on the test client we dont have access to Create Bins then what is the right approach to get it done.
Thanks.

Thanks. I tried using LS05.
What entries should I make?
I entered Warehouse and Storage Type
The Default Session was showing as RLLS0500 and I left it as it is.
But I am getting Error message "Check you entry for manual storage bin creation".
Any suggestions?
Thanks.

Is it possible to Extend the Storage Bin Length from 10 Char to 25 Char

Dear Experts,
We have a Requirement for Extending the Storage Bin Length from 10 Character to 25 Character.
Question 1:
Is it possible to Extend or Not?
Question 2:
Even if we extend what will be Impact on the Current Storage Bin Numbers used now.
Thanks for your support in Advance.

No, you can't change length for storage bin field in standard and also it is not suggestable to client. If client forcing on requirement, You can suggest like below.
create one more field for EXT.storage bin by using enhancement and do one customized report for show as , storage bin number+EXT.storage bin = actual storage bin.
For only client reference you do this report and in standard reports it will not show like this else tell to client ---> it is not possible, because it is replicating and using at different programmes.

Storage Bin & storage Loc. via LSMW

Dear all,
I want to upload sto. Bin & Sto. loc from old sap system to new SAP system via LSMW.
So please provide any link showing step by step method for using LSMW for Sto. BIn & Sto Loc
uploading.
Regards,
Rocky
Edited by: Csaba Szommer on Aug 29, 2011 9:20 AM

Yes you can use LSMW or you can write one BDC which will execute LS01N transaction by reading from file the fields(St type,St bin,St Section, St Bin type,etc) and upload storage bins.
Regards,
Prashant

Date of last inventory for the storage bin

Hello,
We would like confirm that when use the T-code LX26 for Carry out Inventory using the Cycle counting method.
Date of last inventory for the storage bin i,e. date when inventory was last taken in the Warehouse number for a any storage bin shows as 00.00.0000(It is not displaying the any date).
Whether this is a System standard behavoiur or Any other reason.
Please guide me waiting for your reply.
Regards
Sarin.

Hi,
Thanks for your reply.
I have checked in the Field,it showing in the Field.
In T-code LX26 if i take a report for entire WM number it show for some of the Old Inventory date for the some of material
You mean to Say bins were not taken into account for the cycle counting.
How it will be,there is any reason for this .
I am waiting for your reply.
Regards
Sridhar

Not all storage bins in LX16 transaction Carry Out continous inventory

Hello,
I would be please if anybody knows the way of working of transacction LX16. Our client is running this transaction and have the problem that for a warehouse number and storage type, the report not shows all the storage bins that is created and with stock. If we run LX03 transacction, for the same selection we obteins all the storage bins, but if we do the same for LX16 the storage bin is not showed.
Can somebody help us??
Thanks in advance

hi
LX16 transaction is only for " Continious Physical inventory Counting Only"
LX03 is for bin status Report
Take Continuous Inventory
Purpose
With the continuous inventory method, you take inventory for a certain number of storage bins in a storage type. The inventory can take place at any time during the fiscal year.
Continuous inventory has the following advantages over the annual inventory count at the end of the fiscal year:
The effort and costs for the inventory is not concentrated on a certain day or days but is distributed over the entire year. This means that the warehouse supervisor can plan the workforce needed for the workload in the warehouse more accurately.
Inventory can be conducted during slow times in the warehouse, such as during summer vacation periods.
With a reduction in the effort required at the end of the fiscal year, you can respond better to problems that might arise during a year-end closing.
When an inventory is carried out on a continuous basis, up-to-date information about the correspondence between the warehouse stock and the book inventory is always available.
Prerequisites
Inventory methods are defined for each storage type. To define a continuous inventory for a storage type, see Activities ® Physical Inventory ® Define Types per Storage Type in the Warehouse Management section of the Implementation Guide (IMG) documentation.
Process Flow
To run a continuous inventory, you need to complete the following steps in the order displayed:
Plan the inventory by selecting storage bins, for which you want to take inventory.
Create the system inventory record
Activate the system inventory record
Print the warehouse inventory list.
Take physical inventory in the warehouse.
Enter the inventory results
Close the inventory
Process differences in Warehouse Management (WM) and record them in Inventory Management (IM).
hope this helps to solve your issue
regards
KKY

Picklist to show Storage bin

Similar Messages

Maybe you are looking for