Pickup without Group Configuration
We're migrating from a CME environment to a CUCM6.1 environment.
In CME it was possible to just hit Pickup, dial the extension and pickup the call that was ringing on the extension you just dialed.
Is this possible in CUCM? I'm aware of the Group Pickup feature and the Other Group Pickup feature, but how about just Pickup?
I don't want to put everyone in the same group and then hit GroupPickup, or it could pickup any extension that's ringing in the same group.
until CUCM 7 comes out
HTH
javalenc
if this helps, please rate
Similar Messages
-
Terms of payment made optional in account group configuration of customer
Hi Experts,
I have made terms of payment optional in account group configuration of customer master for one time customer but it is showing me mandatory when I am creating or changing customer.
Is any body has any idea why this is happening?
Thanks
Krushnakumar RathiHi
Select the Relevant account group
Double Click on the Company Code data under Field status you will get another screen
In that Screen Double click on the Payment Transactions under selection group and check the field "terms of payment" is Required entry or optional entry , mention Optional Entry
Same as Double Click on the Sales data under Field status you will get another screen
In that Screen Double click on the Billing under selection group and check the field "terms of payment" is Required entry or optional entry , mention Optional Entry
Regards,
Prasanna -
Error checking transport group configuration in System BQS
Hi Everyone,
I made a client export from Production to Quality. It went successfully,, I noted the requests numbers and transported them from PRD to Quality, but while transporting there was a tp error(which i did not note), next i went to the quality import queue and saw all the 3 requests had come. But when i click the adjust queue icon im getting the following error message "Error checking transport group configuration in System BQS" . Afterwards i tried to delete the requests from quality to retransport from production but still im not able to delete those requests from quality. Can anyone help me solve this.
Regards,
RahulHello Rahul,
regarding the error message:
"Error checking transport group configuration in system"
It's mostly related to the TMSADM RFC destination. Kindly follow the below mention steps:
1. Logon to client 000 with user DDIC.
2. STMS > System > Overview > Select the system in which you are logged in > Click on the menu says EXTRAS > Generate RFC Destinations
Perform the above steps in all the systems configure in your TMS. This should resolve the issue.
Best regards,
Tomas Black -
OrgChart 3.0 SP1 - Sub Category Groups configuration?
According to the Admin Guide the Sub Category Groups configuration in Admin Console would allow me to group similar records within the same org chart box. I assume the Sub Category Filter will define the criteria for sorting the records but there is no description / example/ guidance on what the syntax should be for this field. 2 different results I would like to achieve are:
(1) to list names of multiple incumbents for one position in a box, rather than simply showing the phrase "multiple incumbents".
(2) to hide the whole group of multiple incumbents for a position, based on the Employee Group.
Any assistance appreciated.
Thanks,
ClementineHi Clementine,
I would suggest that you apply a filter to the data element. You can do this in the AdminConsole via OrgChart > Positions > Data Connection (that is "Positions" directly under "Organization Structure"). Add a filter, such as:
where EmpGrp != '9'
You can also do this for the Employees hierarchy too ( OrgChart > Employees > Data Connection ).
Please note that the field for exclusion must be a hierarchy field, i.e. it must exst in the list of Fields under OrgChart > Positions > Fields. You may have to change the data element configuration file in order to achieve this.
Best regards,
Luke -
OCS 2007 R2 Response Group Configuration Tool Failure
Hello there.
We are bringing back to life an old OCS installation. Customer performed a clean AD reinstall and we are in the process of re-installing OCS 2007 R2. All seems to work fine, except the RGS. When accessing the web tool we get this error:
Response Group Configuration Tool Failure
An unknown error occurred. The operation cannot complete successfully. Please contact the administrator if this problem persists.
Click here to return Home.
the Event viewer for application on the FE shows:
Event code: 3005
Event message: Excepción no controlada.
Event time: 13/05/2014 12:13:01 p.m.
Event time (UTC): 13/05/2014 06:13:01 p.m.
Event ID: a74ea242095f4e8099bca266a7a5cc83
Event sequence: 8
Event occurrence: 1
Event detail code: 0
Application information:
Application domain: /LM/W3SVC/1/ROOT/Rgs-1-130444779241580315
Trust level: Full
Application Virtual Path: /Rgs
Application Path: C:\Program Files\Microsoft Office Communications Server 2007 R2\Web Components\Acd Files\
Machine name: OCSR2-FE02
Process information:
Process ID: 6504
Process name: w3wp.exe
Account name: domain\RTCComponentService
Exception information:
Exception type: COMException
Exception message:
Request information:
Request URL: https://ocspool.domain.com:443/Rgs/Deploy/Default.aspx
Request path: /Rgs/Deploy/Default.aspx
User host address: 172.16.6.32
User: domain\user
Is authenticated: True
Authentication Type: Negotiate
Thread account name: domain\RTCComponentService
Thread information:
Thread ID: 9
Thread account name: domain\RTCComponentService
Is impersonating: False
Stack trace: en System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
en System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext()
en System.Management.ManagementObjectCollection.get_Count()
en Microsoft.Rtc.Acd.Management.OcsApplicationContactSetting.Select(String condition)
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.GetContactObject()
en Microsoft.Rtc.Acd.Web.UI.WorkflowTemplate.AddedControl(Control control, Int32 index)
en ASP.deploy_default_aspx.__BuildControl__control15(Control __ctrl)
en Microsoft.Rtc.Acd.Web.UI.TemplateHelper.InstantiateWorkflowTemplate(AcdWorkflow workflow, ITemplate template, ControlCollection controlsToAddTo, String resourceClass, String templateResourcePrefix)
en Microsoft.Rtc.Acd.Web.UI.AcdWorkflowList.CreateChildControls()
en System.Web.UI.Control.EnsureChildControls()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Control.PreRenderRecursiveInternal()
en System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint)
Custom event details:
on the OCS logs I have:
Unhandled exception occurred in the Response Group Service Configuration Tool. The operation could not complete successfully.
Requested URL: /Rgs/Deploy/Default.aspx
User / Host making the Request: domain\user/ 172.16.6.32
Unhandled exception: System.Web.HttpUnhandledException - Se produjo una excepción de tipo 'System.Web.HttpUnhandledException'.
Inner Exception: System.Runtime.InteropServices.COMException
Cause: An unhandled exception occurred.
Resolution:
Check the exception.
Windows server is installed in spanish, if you wonder why the mix in languages.
We have been battling with this error for the last 2 weeks. Any help is greatly appreciated!
FRHi,
Please check the configuration of the Response Group Service with the help of the link below:
http://technet.microsoft.com/en-us/library/dd441277(v=office.13).aspx
Please check the OCS components that are required to implement the Response Group Service below:
Application Server and Response Group Service
Language pack
Administrative tools
Web Components Server
Internet Information Services
Microsoft Office Communicator 2007 R2
You can try to use the workflows that you crated to validate the deployment.
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support -
Nested group function without group xmlagg
I am getting nested group function without group by xmlagg when using the xmlagg function inside another xmlagg function. Find the table structure and sample data here,
CREATE TABLE "TEST_TABLE"
("KEY" NUMBER(20,0),
"NAME" VARCHAR2(50 ),
"DESCRIPTION" VARCHAR2(100 )
Insert into TEST_TABLE (KEY,NAME,DESCRIPTION) values (1,'sam','desc1');
Insert into TEST_TABLE (KEY,NAME,DESCRIPTION) values (2,'max','desc2');
Insert into TEST_TABLE (KEY,NAME,DESCRIPTION) values (3,'peter',null);
Insert into TEST_TABLE (KEY,NAME,DESCRIPTION) values (4,'andrew',null);
select
XMLSerialize(document
xmlelement("root",
xmlagg(
xmlelement("emp"
, xmlforest(Key as "ID")
, xmlforest(name as "ename")
, xmlelement("Descriptions",
xmlagg(
xmlforest(description as "Desc")
) as clob indent
) as t
from test_table;Then i removed the xmlagg function from the above select query and used xmlelement instead
select
XMLSerialize(document
xmlelement("root",
xmlagg(
xmlelement("emp"
, xmlforest(Key as "ID")
, xmlforest(name as "ename")
, xmlelement("Descriptions",
xmlforest(description as "Desc")
) as clob indent
) as t
from test_table;This is working fine, but xml created with empty elements for Descriptions element for key 3 and 4 which has null values. I need don't need Descriptions element in the xml when it has null value. Please help me to resolve this.You can do it with a correlated subquery :
SQL> select xmlserialize(document
2 xmlelement("root",
3 xmlagg(
4 xmlelement("emp"
5 , xmlforest(
6 t.key as "ID"
7 , t.name as "ename"
8 , (
9 select xmlagg(
10 xmlelement("Desc", d.description)
11 order by d.description -- if necessary
12 )
13 from test_desc d
14 where d.key = t.key
15 ) as "Descriptions"
16 )
17 )
18 )
19 ) as clob indent
20 )
21 from test_table t;
XMLSERIALIZE(DOCUMENTXMLELEMEN
<root>
<emp>
<ID>1</ID>
<ename>sam</ename>
<Descriptions>
<Desc>desc1_1</Desc>
<Desc>desc1_2</Desc>
<Desc>desc1_3</Desc>
</Descriptions>
</emp>
<emp>
<ID>2</ID>
<ename>max</ename>
<Descriptions>
<Desc>desc2_1</Desc>
<Desc>desc2_2</Desc>
<Desc>desc2_3</Desc>
</Descriptions>
</emp>
<emp>
<ID>3</ID>
<ename>peter</ename>
</emp>
<emp>
<ID>4</ID>
<ename>andrew</ename>
</emp>
</root>
Or an OUTER JOIN + GROUP-BY :
select xmlserialize(document
xmlelement("root",
xmlagg(
xmlelement("emp"
, xmlforest(
t.key as "ID"
, t.name as "ename"
, xmlagg(
xmlforest(d.description as "Desc")
order by d.description -- if necessary
) as "Descriptions"
) as clob indent
from test_table t
left outer join test_desc d on d.key = t.key
group by t.key
, t.name
;Edited by: odie_63 on 11 juil. 2012 14:54 - added 2nd option -
Infrastructure:
we have 3000 access point spread across 15 buildings,
we have 15 WiSMs (3no.s of 6509 controllers) catering those AP's from central locations,
we have 350 AP's in one building (3 floors) and in some 200 AP's(2 floors),
planning for ACS with EAP-FAST implementation.
Requirement:
I want to use /24 subnet for AP's as well as for WLAN Clients.
clients should have /24 subnet only
I know about the AP grouping concept and I read some document aswell on the cisco site, but in those documents didn't help me much for AP Grouping VLAN and external DHCP configuration (Client)
Could anyone help me in configuring the AP grouping with external DHCP server for clients /24 subnet IP's.Thanks for your reply,
My Switch working as L2 in buildings and L3 only in Datacenter location.
I am Planning to use 8 SSID's,
As a best practice from Cisco 100 AP's per subnet, I would like to go with AP grouping configuration, now I would like to know how to configure clients with /24 subnet, (external DHCP Server), if you have any sample configuration steps kindly share the same, or give me idea about how to configure /24 subnet for clients.
in the WiSM I am configuring AP grouping 90 access point to one group, 150 access point to one group, remaining in the other group.
Now since I have only 3 AP group and I want to configure /24 clients keeping max. 20 users per access point. how to configure the client IP address. -
Direct connection between 2 clients without any configuration!
I wan to make a system act like hamachi or logmein (websever & clients).
I have a webserver on the internet and two client from different networks connected to this webserver, now i want to make directly connection between these clients without any configuration on router. I think it is possible because all infomation about clients network could be got from http request which they send to server. But i don't know what exact fields in the header of http request that i need and how to set them to create connection between clients. I need some ideas about this issue.
Edited by: tulous on Nov 20, 2008 7:40 PM
Edited by: tulous on Nov 20, 2008 7:41 PMtulous wrote:
I know, so if you want to use a remote control tool such as: VNC, remote desktop you must config on router or server. But even if you had a proxy(permit port 80) when you type www.sun.com you will get data from it, this data was sent from Sun to your proxy and in some way the data was return to your browser. So i think if we have enough information(it come from the webserver) we could init a connection between 2 client. An example of this is Hamachi.
At first 2 hamachi clients connect to a server of hamachi, when they have their id, a tunnel between 2 clients was established without any configuration on proxy(certainly that server did not deny port of hamachi). From now 2 clients can exchange data not through the server. The same in logmein, you can remote desktop any where with zero configuration, but the speed is guarantee because they contact to server for query information, but the data was transmited directly. Sorry if i make mistake.It doesn't work the way you think.
There is a proxy or you have to have one side listening with a ServerSocket and have ports opened as needed. You can't create a Socket connection on server A between clients B and C and then pass it off to clients B and C and magically they just talk to each other.
It does not work that way. It is impossible to do it that way. -
I am replacing a 2611 with a 2811, I am copying the setups from the old router, I have a question about the following.. on the old router there was no line in my config for l2tp - I do not seem to be able to find any configuration options for it - I don't nec want to get rid of it but want to mainly know how to config it and if the same options apply for pptp? I think I have gone into all of the listed options and put in "?" is l2tp missing from the help?
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
l2tp tunnel password 7Which IOS version are you using? , if you are using lower version, need to upgrade to version 12.4(6)
Sample VPN group configuration:
vpdn-group 2
! Default L2TP VPDN group
description L2TP for Dial
accept-dialin
protocol l2tp
virtual-template 2
l2tp tunnel password xxxxx -
TMS Provisioning Extension services: BASE GROUP Configuration Issue
I was trying to configure the TMS Provisioning Extension services and i got stuck in Base Group Value?
Error was getting something like the Base group value which i given was wrong. And it's asking me to check with TMS Administrator. Unfortunatly i am the one who configured the TMS also. but i didn't find something like Base Group value.
In my scenario i have two VCS Control, two VCS Expressway, and a TMS. I have the clustering configured on both VCS Control and Expressway. and i need to use TMS Provisioning Extension Service for Cisco Movi.
Where i can find the Base Group Configuration value?
Regards,
Nikhil JayanHi, i am not able to see the Provisioning Mode option in Administrative tools > Configuration > General Settings.
Administrative tools > Configuration > Provisioning Extension Settings tab also is not coming. I am using TMS Version 13.2 and VCS x7.1.
Do i need to configure something to get enable the TMS Provisioning Extension Service on TMS.
Please help me.
Regards,
Nikhil Jayan -
CUCM Group Configuration- question about phones failing to secondary callmanager
I wanted to get clarification about how exactly phones will register to the secondary or tertiary servers if the link to the primary fails.
I have a 3 server CUCM cluster. 1 subscriber that some phones register to is separated from the other 2.
When the link to that sub goes down, the phone should then register to the secondary server of its Cisco Unified CallManager Group configuration, correct?
If this is true, then my next question is how long does it take to then failover to the secondary server?
SRST is not involved in this, it's just the CUCM Group Config. Any help clarifying how phones behave in this situation?I found my own answer in the Cisco Press Troubleshooting Cisco IP Telephony book, page 155:
"The TFTP configuration file received by the IP phone has a list of up to three CallManagers
for registration purposes. The order of CallManagers indicates their priority. The first is the
highest-priority CallManager for the IP phone. It is the first place the IP phone attempts to
register. The highest-priority CallManager is also called the primary CallManager.
When the IP phone registers with its primary CallManager, it also establishes a standby
TCP connection to the next-highest–priority available CallManager, sometimes called the
standby CallManager, secondary CallManager, or backup CallManager.
The IP phone knows that there is an alternative CallManager for quick failover if it loses connectivity
with its primary CallManager.
At any given point in time, the CallManager to which the phone is registered is its active
connection. The CallManager node that has a standby TCP connection for the IP phone is
the standby connection.
Failover occurs under two conditions:
• If the TCP connection between the IP phone and the primary CallManager goes down.
Incidentally, stopping the CallManager service on a server causes all the TCP connections
to be closed and all the IP phones on that server to register to their standby.
• If CallManager has not responded to three consecutive KeepAlive messages sent from
the IP phone.
Any number of network-related issues could cause the TCP connection to go down. When
the IP phone registers with its standby CallManager, it registers with an alarm indicating
why it failed over.
Under the second condition, CallManager fails to respond to three consecutive KeepAlives.
The IP phone sends a KeepAlive message every 30 seconds by default. CallManager should
answer each KeepAlive the IP phone sends with an acknowledgment message. If
CallManager fails to respond to three consecutive KeepAlive messages, the IP phone marks
the connection as “bad.” The IP phone does not tear down the TCP connection, but it does
not attempt to re-register with the “bad” CallManager either. It continues sending
KeepAlive messages to the “bad” CallManager until CallManager tears down the TCP
connection. This delay gives CallManager time to respond if it recovers quickly. After 10
minutes, the IP phone removes the “bad” tag and again tries to establish communication
with CallManager using KeepAlive messages in the process just described. During this
time, the IP phone attempts to establish a connection with its secondary CallManager (or
its tertiary if the secondary is not available) and registers if possible.
If a call is in progress when an IP phone detects the loss of a TCP connection, the IP phone
does not fail over until the call is finished. If CallManager fails to respond to three consecutive
KeepAlive messages while an IP phone has an active call, the IP phone again waits
until the call is finished before registering to its standby CallManager."
Hope that helps someone else in the future. -
Nested Group Function without Group By Problem
Hey everyone,
I have 3 tables as below:
TABLES
ITEM (Item_no, Item_price, desc)
DeliveryItem (delivery_no, item_no, quantity)
Delivery (delivery_no, delivery_date)
SELECT desc, MAX(SUM(quantity)) FROM DeliveryItem, Item, Delivery WHERE Item.item_no = DeliveryItem.item_no AND Delivery.delivery_no = deliveryitem.delivery_no;
And I'm trying to output description of most delivered item but I got an error like SQL Error: ORA-00978: nested group function without GROUP BY. Could you help me to fix my code?
ThanxHi,
DESC is not a good column name; you could get errors if the parser thinks it means DESCending. I used DESCRIPTION instead, below.
I think the best way is to do the SUM in a sub-query, lkike this:
WITH got_r_num AS
SELECT item_no
, SUM (quantity) AS total_quantity
, RANK () OVER (ORDER BY SUM (quantity) DESC) AS r_num
FROM deliveryitem
GROUP BY item_no
SELECT i.description
, r.total_quantity
FROM got_r_num r
JOIN item i ON r.item_no = i.item_no
WHERE r.r_num = 1
;If you want to do it without a sub-query:
SELECT MIN (i.description) KEEP (DENSE_RANK LAST ORDER BY SUM (di.quantity)
AS description
, MAX (SUM (quantity)) AS total_quantity
FROM deliveryitem di
JOIN item i ON d1.item_no = i.tiem_no
GROUP BY i.description
;If you do nested aggegate functions, then every column in the SELECT clause must be an aggregate applied to either
(a) another aggregate, or
(b) one of the GROUP BY expressions.
That's why you got the ORA-00937 error.
This second approach will only display one row of output, so If there is a tie for the item with the greatest total_quantity, only one description will be shown. The RANK method will show all items that had the highest total_quantity.
It looks like the delivery table plays no role in this problem, but it there's some reason for including it, you can join it tpo either query above.
Of course, unless you post test copies of your tables (CREATE TABLE and INSERT statements) I cn't test anything.
Edited by: Frank Kulash on Nov 6, 2010 10:57 AM -
CUCM version 9.0 SNMP MIB2 System Group Configuration
Hi,
I notice that on CUCM and CUC 9, the MIB2 System Group Configuration Information does not allow spaces on the System Location "South East Asia"...
On CUCM and CUC 7, I do not have this problem see attached screenshot "CUCM 7". Is there a way I can enter this Location on the backend using CLI?
See attached error message on CUCM 9 "capture".
ThanksYou can accomplish this by using the proper escape sequence. If you insert & nbsp ; in place of each space characters you will be allowed to save those fields.
Please note that I had to inserts spaces between the & and the nbsp and the ; due to the way the message board renders HTML content. In real world use it should look like the attached screen shot.
Once you save your changes you will notice that the text boxes are re-formatted with the spaces you originally wanted. This means that if you need to update the values in the future you must re-insert all the & nbsp ; sequences again before updating. -
RV220W LDAP Group Configuration
During LDAP Group configuration LDAP Attributes are required. Can I handle any sample configuration for OpenLDAP or 389ds connectivity?
I would like to use them for internal VPN. But my LDAP users are not correctly handled.
Regards,
MarcinHi,
Curious - which LDAP server are you using ? Which version
of MQ are you using ?
Did you create new group names or did you stick to group
names that MQ already used (in the default file based
user repository) - 'admin' and 'user' ? This would be the groups
you created under:
cn\=group1,ou\=imqgroups,o\=Groups, dc\=unimas,dc\=com
Also, since you created new groups , you might want to read
up on how to modify the accesscontrol.properties file:
http://docs.sun.com/source/819-0066/security.html#wp47944
Of interest is this entry from the above page:
The default ACL properties file gives all users access
to NORMAL connection services and gives users in the
group admin access to ADMIN connection services:
connection.NORMAL.allow.user=*
connection.ADMIN.allow.group=admin
If you are using a file-based user repository, the default
group admin is created by imqusermgr. If you are using
an LDAP user repository, you can do one of the following
to use the default ACL properties file:
* Define a group called admin in the LDAP directory.
* Replace the name admin in the ACL properties file with
the names of one or more groups that are defined in
the LDAP directory.
The default entries in the accesscontrol.properties file
basically allow any user in the repository to log in,
but only users in group 'admin' to do admin stuff.
If you created a group called 'mygroup', you might want to
create the following entry (or modify existing entries) to
restrict only users in 'mygroup' to create normal JMS (ie not
admin) connections:
connection.NORMAL.allow.group=mygroup
hope this helps,
-isa
http://www.sun.com/software/products/message_queue/index.xml -
Help needed for pickup group configuration
I have been handed the task of configuring a pickup group and the setting on a MDs phone and Secretary and need some help please.
There is a Pickup group that a user is already a member of. She is now also secretary to a General Manager and needs to be able to pick his calls up. I have added the GM as and extra line on the secretary's phone but now when the GM's phone rings, all the people in the pickup group can't tell whether it's the secretary's phone ringing or the GM's. Obviously the people in the pickup group don't want to be picking up the GM's calls so is there another way around this or is there a way that on the secretary's phone, her ringtone and the GM's ringtone can be different?
I have tried adding Audio and Visual Alert to the pickup group but no one in the pickup group wants to know who is calling who so I think they just need to be able to differentiate between the secretary and the GM by the sound of the ringtoneâ¦.
I hope that makes sense!!
Many Thanks!
Adamthe second line you put on the secretary's phone is that a shared line?
I would set it up as being just that, and make sure the ring setting is flash only. That shared line (i.e. the GM's extension) should not be part of a pickup group.
try that and see how get on
Maybe you are looking for
-
How do I create separate playlists for two ipods/one library and them sync them?
I have an older classic ipod, my daughter has an older nano. I got new laptop and have managed to sync my ipod and ipad with success, as well as move my library from old pc to new laptop. Now I am trying to update and sync my daughter's ipod. It s
-
Connected to internet - IE and Firefox wont work
I am connected to the internet, Safari and MSN work. When I try to get on FireFox or IE it says my connection is being interrupted. I had just downloaded Microsoft Office, and the problems started after that. I checked my firewall to see if that wa
-
How to set the language in Safari? why is this so complicated?
Hi, I have already installed Safari 5 but it is in French! I would like to change it into English. I don't find any language setting in the different menu/submenu/preference! I am using win7. While searching the web, I found that I have to that in th
-
I cannot seem to be able to upgrade my itunes to atleast 4.9 for my IPOD.
For some reason I cannot seem to be able to upgrade my ITUNES for my NANO. Even the disk that came with it does not want to work. It gives me an error message saying, "1607: Unable to install INSTALL SHIELD scripting runtime." I tried to upgrade on t
-
The awesome bar is suggesting history
I changed my settings so that the awesome bar only suggests my bookmarks. However, it still is suggesting history (and items that are not in my bookmarks). I've deleted my history multiple times, but websites that I have only visited once are being a