Picl_initialize failed: General system failure, SUN OS 5.8 SF V440
Hi,
I am getting this error while running prtdiag -v command. On Sunfire V440 running on Solaris 5.8 OS. Please let me know what was the issue, why I am getting this error.
# /usr/platform/sun4u/sbin/prtdiag -v
picl_initialize failed: General system failure
# pkginfo -l SUNWkvm
PKGINST: SUNWkvm
NAME: Core Architecture, (Kvm)
CATEGORY: system
ARCH: sparc.sun4u
VERSION: 11.8.0,REV=2000.01.08.18.12
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: core software for a specific hardware platform group
PSTAMP: on28-patch20060515055243
INSTDATE: Oct 13 2007 09:26
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 244 installed pathnames
52 shared pathnames
58 directories
10 executables
3 setuid/setgid executables
1652 blocks used (approx)
Thanks,
If i recall all the picl/prtdiag cases i had when i worked at sun, they both came down to the following two reasons:
1. system with ancient patches
2. system with no patches
.. so i think its a good idea to start by verifying that you are up-to-date on patches. And verify that relevant processes are running..
.7/M.
Similar Messages
-
Connection Failed: AFP System Failure
All of a sudden, I cannot connect to another computer from my MacBook Pro (intel 2.16 ghz Core Duo) through a wireless network. I always click on the nework icon, pick the computer, enter the password but now I get the "Connection failed: AFP system error has occurred". I haven't changed anything lately (that I know of) and am updated completely according to software update.
I can connect to the laptop, connect from the laptop to the internet and ping another computer without difficulty.
Can anyone suggest what to do to correct this?
ThanksAt this point I think you should get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, reboot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
If that doesn't cure it, then try Connect To Server and put in afp://ip.of.some.mac -
ZBOOK 17 - Flash Cache & General System Failure
Greetings,
History:
On my first windows install on my Zbook 17, the OS installed the System Reserved partition on the flash cache SSD. I figured I'd do a reinstall when I ordered and installed a 1tb SSD. I removed all HDDs and the flash cache, installed the OS, then turned off the computer and re-installed the flash cache. Now when I try to boot it gives me 5 blinks on the caps/num lock along with a lovely black screen.
Has anyone ran into this before? Anything I could do to fix it? Thanks in advance,
Ryan
This question was solved.
View Solution.Hello @Behr82
To get your issue more exposure I would suggest posting it in the commercial forums since the HP ZBook 17 is a commercial product. You can do this here Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE
The support page for your product may be helpful in the meantime: HP ZBook 17 Mobile Workstation.
As a heads up before heading over there, the 5 blink code on the Caps Lock light indicates a motherboard failure. This doesn't always mean a hardware issue but in most cases requires a repair.
I hope this helps!
Thank you for posting on the HP Forums.
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP. -
Portfast case ping transmit failed general failure
Hi
today i add a host in a vlan, but it can't ping itself and get ping transmit failed general failure unless remove the spaning portfast command. i try difeerent vendor PC, IBX... ,HX..,DXl..., all host can't ping itself.
the reason is the portfast? but portfast isn't only fotr host pc,
the following is same our command about spaning.sorry for i can't past all command because our com private.
errdisable recovery cause udld
errdisable recovery cause bpduguard
errdisable recovery cause security-violation
errdisable recovery cause channel-misconfig
errdisable recovery cause pagp-flap
errdisable recovery cause dtp-flap
errdisable recovery cause link-flap
errdisable recovery cause gbic-invalid
errdisable recovery cause l2ptguard
errdisable recovery cause psecure-violation
errdisable recovery cause dhcp-rate-limit
errdisable recovery cause unicast-flood
errdisable recovery cause vmps
errdisable recovery cause storm-control
errdisable recovery cause arp-inspection
errdisable recovery interval 30
power redundancy-mode redundant
no file verify auto
spanning-tree mode pvst
spanning-tree loopguard default
spanning-tree portfast bpduguard default
spanning-tree extend system-idwhat do you see under "show interface status" of the switch when the issue occurs?
do you see input/output rate on that interface when the issue occurs?
what is the spanning-tree state of that port?
when you say you get "ping transmit failed", are you getting that error when you try to ping the PC's IP address from the PC?
are you able to ping 127.0.0.1?
and, what does the PC's network connection say? -
HP Photosmart C7280 All-in-one problem printing. Ink System Failure has failed unable to copy--
I'm having a problem printing on my HP Photosmart C7280 All-In-One. The following message is what came up on the printer screen: Ink System Failure has failed unable to copy, receive faxes or print. Refer to printer documentation Error O.cl9a0007.
Does anyone have any suggestions?
This question was solved.
View Solution.Hey Spider! First off welcome to the forum.
I would recommend removing all the ink cartridges, unplugging the USB cable from the computer that connects to the printer, and then shutting the printer off completely by removing the power cord. Then restart your computer. Turn the printer back on but leave it disconnected from the computer. After it has finished its power on cycle go ahead and insert the ink cartridges back into the printer and be sure to seat them properly.
After you have all the cartridges back in the printer properly then connect it to the computer. See if this resolves the issue. If not post back with any findings.
Thanks,
SeanS
-------------How do I give Kudos? | How do I mark a post as Solved? -------------------------------------------------------- -
CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?
Error "The serial number is not valid for this product" | Creative Suite
-
[EliteBook 8570w] General System Board Failure
While trying out a new Linux distro (probably unrelated), I've found my EliteBook 8570w unbootable. When I turn on the computer both the num lock and caps lock lights blink 5 times (General system board failure) while seeing the HP boot logo.
I tried restoring a working BIOS, however I've formatted all drives before which means there's not HP_TOOLS or HP_RECOVERY partitions. I tried restoring the BIOS through a flash drive but with no results: the light of the USB drive flashes for about a half second, the caps lock light starts flashing, the fan goes full throttle and then nothing happens; the computer can only be turned off by unplugging AC.
After trying several configurations of the flash drive (UEFI restore, BIOS update, custom stuff...) with the same result, I'm not sure what to do next.
Is there any other viable options to try (e.g. would flashing BIOS work with a HP_TOOLS partition on the HDD)? Is my motherboard just plain dead?
Thanks in advance.Hi @Jaapp ,
Welcome to the HP Support Forums!
I understand that your System Board is not working on your HP EliteBook 8570w Mobile Workstation. Your EliteBook is a business computer and you will find the best answer to your questions on the Commercial Forums. You can post your questions here at the HP Enterprise Business Community.
In the meantime, here is the HP EliteBook 8570w Mobile Workstation support page, that may have the solution for you.
I hope this information helps.
Take care and have a great day!
I worked on behalf of HP. -
Hi SAP Gurus,
We are configuring the CIN Settings for our client and at the time of testing, while saving the Out going excise invoice the system is giving the error as “Balance in Transaction Error” and when pressed enter the system displays the error as “ system failure during locking GL account 5555 by 13113910.”
We have configured Out going excise duty condition types in the SD pricing procedure
and
also maintained the same condition types as mentioned below in the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / MAINTAIN EXCISE DEFAULTS
under the headings
AR BED Cond – JEXP
AR Cess Cond – JECS
ECS AR – JHEC
And also maintained the settings in the Path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / SPECIFY EXCISE ACCOUNTS PER EXCISE TRANSACTION and also in SPECIFY G/L ACCOUNTS PER EXCISE TRANSACTION .
But still the above mentioned error is comming.
Note : error in not coming when I am removing the JHEC condition type from the path IMG / LOGISTICS GENERAL / TAX ON GOODS MOVEMENT / INDIA / BASIC SETTINGS/ DETERMINATION OF EXCISE DUTY / under the heading ECR AR, But we need the JHEC(ie. Higher education cess) also in out going excise invoice.
Please let me know what is the issue and how to resolve it.
Thanks & Regards
ShashiDear We faced the same issue and almost for 20 days to get it resolved.
For this kind of error firstly Check have you activated the Liable for AT1 indicator in(IMG>>Log.General>>Tax on goods Movement>>India>>Basic Settings>>Maintain Excise registrations)
Also Have you assigned Proper GL account in (IMG>>Log.General>>Tax on Good Movement>>>India>>>Account Determination>>Account determination per Excise transaction type.
Here pl check the relevant GL has been assigned for
1.RG23A BED(for Both incoming and outgoing excise invoice updations against your ETT)
2 RG23C BED, (for Both incoming and outgoing excise invoice updations against your ETT)
3 .OFF SET,(for Both incoming and outgoing excise invoice updations against your ETT)
4 MODVAT.CLEARING, (for Both incoming and outgoing excise invoice updations against your ETT)
5 PLA BED& AED & SED,(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
6 PLA CESS(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
7 CENVAT ON HOLD(for Both incoming and outgoing excise invoice updations against your ETT at the time of utilizations)
8.CENVAT SUSPENSE(for Both incoming and outgoing excise invoice updations against your ETT at the time of invoice posting)
9.PLA ON HOLD((for Both incoming and outgoing excise invoice updations against your ETT at the time of TR6c)
10. CENVAT REVERSAL(For cancellations vs ETT)
11. RG23A ECS(for Both incoming and outgoing excise invoice updations against your ETT)
12. RG23C ECS(for Both incoming and outgoing excise invoice updations against your ETT)
13. PLA ECS(for Both incoming and outgoing excise invoice updations against your ETT )
14. RG23A AT1(check this more carefully)
15. RG23C AT1(check this more carefully)
16. PLA AT1(check this more carefully)
Hope this helps you...
Phanikumar -
SYSTEM FAILURE로 PO STAUTS가 INPROCESS 상태시 해결방법
제품 : MFG_PO
작성날짜 : 2006-05-17
SYSTEM FAILURE로 PO STAUTS가 'INPROCESS' 상태시 해결방법
========================================================
PURPOSE
Document approval manager가 fails 되어 down 되면 PO는 IN PROCESS 상태가
된다.이 PO에 대한 available한 workflow가 없고,reprocess 하기 위해
wfretry를 시도해도 실패한다면 아래 script를 이용한다.
(Oracle Purchasing - Version: 11.5.9)
Explanation
Document approval시 발생하는 Document Approval Manager crashing은 PO의상태를 IN PROCESS로 만드는 원인이 된다.
Workflow는 완전히 처리되지 못하고 workflow activities processes와
system 안에서 "lost" 상태가 된다.
이 때 wf_item_key는 어떤 active한 workflow와도 상응하지 못하기 때문에
불필요한 상태가 되어 버린다.
System crash로 인해 session variable data를 잃어버렸기 때문에 wfretry
를 실행해도 workflow는 restart 되지 못한다.
Solution :
아래 steps에 따라 작업한다.
NOTE: 이 script는 oracle의 승인 및 review 없이 사용할 수 없으며, 예산
계정을 사용하는 경우 사용할 수 없다.
1. Please run the following sql update:
-- START OF RESET SCRIPT
set serveroutput on size 100000
DECLARE
CURSOR potoreset is
SELECT wf_item_type, wf_item_key, po_header_id, segment1,
revision_num, type_lookup_code
FROM po_headers_all
WHERE segment1 = '&PO_NUMBER '
and authorization_status IN ('IN PROCESS', 'PRE-APPROVED')
and NVL(cancel_flag, 'N') = 'N'
and NVL(closed_code, 'OPEN') != 'FINALLY_CLOSED';
CURSOR maxseq(id number, subtype po_action_history.object_sub_type_code%type) is
SELECT nvl(max(sequence_num), 0)
FROM po_action_history
WHERE object_type_code IN ('PO', 'PA')
AND object_sub_type_code = subtype
AND object_id = id
AND action_code is NULL;
CURSOR poaction(id number, subtype po_action_history.object_sub_type_code%type) is
SELECT nvl(max(sequence_num), 0)
FROM po_action_history
WHERE object_type_code IN ('PO', 'PA')
AND object_sub_type_code = subtype
AND object_id = id
AND action_code = 'SUBMIT';
submitseq po_action_history.sequence_num%type;
nullseq po_action_history.sequence_num%type;
BEGIN
dbms_output.put_line('------------------------------------');
dbms_output.put_line('Data Manipulation Scripts Disclaimer');
dbms_output.put_line('------------------------------------');
dbms_output.put_line('As always please ask customer to run the scripts on their test instance first ');
dbms_output.put_line('before applying it on production. Make sure the data is validated for ');
dbms_output.put_line('correctness and related functionality is verified after the script has been');
dbms_output.put_line('run on a test instance. Customer is responsible to authenticate and verify ');
dbms_output.put_line('correctness of data manipulation scripts.');
FOR pos in potoreset LOOP
dbms_output.put_line('Processing '||pos.type_lookup_code||' PO Number: '||pos.segment1);
dbms_output.put_line('......................................');
dbms_output.put_line('Closing Notifications...');
BEGIN
UPDATE wf_notifications set status = 'CANCELED'
WHERE notification_id in (
select ias.notification_id
from wf_item_activity_statuses ias,
wf_notifications ntf
where ias.item_type = pos.wf_item_type
and ias.item_key = pos.wf_item_key
and ntf.notification_id = ias.notification_id)
AND NVL(status, 'OPEN') = 'OPEN';
EXCEPTION
WHEN OTHERS THEN
null;
END;
dbms_output.put_line('Aborting Workflow...');
BEGIN
WF_Engine.AbortProcess(pos.wf_item_type, pos.wf_item_key);
EXCEPTION
WHEN OTHERS THEN
null;
END;
dbms_output.put_line('Updating PO Status...');
UPDATE po_headers_all
set authorization_status = decode(pos.revision_num, 0, 'INCOMPLETE','REQUIRES REAPPROVAL'),
wf_item_type = NULL,
wf_item_key = NULL,
approved_flag = decode(pos.revision_num, 0, 'N', 'R')
where po_header_id = pos.po_header_id;
OPEN maxseq(pos.po_header_id, pos.type_lookup_code);
FETCH maxseq into nullseq;
CLOSE maxseq;
OPEN poaction(pos.po_header_id, pos.type_lookup_code);
FETCH poaction into submitseq;
CLOSE poaction;
IF nullseq > submitseq THEN
dbms_output.put_line('Deleting PO Action History...');
DELETE FROM po_action_history
WHERE object_id = pos.po_header_id
AND object_type_code IN ('PO', 'PA')
AND object_sub_type_code = pos.type_lookup_code
AND sequence_num >= submitseq;
END IF;
dbms_output.put_line('Done Processing.');
dbms_output.put_line('................');
dbms_output.put_line('Please issue commit, if no errors found.');
END LOOP;
END;
-- END OF RESET SCRIPT
2. If the above sql update completes without error the please issue a
commit:
commit;
If the above sql update errors then issue a rollback:
rollback;
3. When the above sql updates are complete, then query up the purchase
order in theEnter Purchase Order form and resubmit the document for
approval.
Reference Documents
Note 297980.1 -
Hi,
Suddenly I got this error in SCVMM 2012-R2 Roll-up 1:
When working with User-Roles (create/update) or assigning a Cloud :
"VMM encountered a critical exception and created an exception report....
search user forums for well-known failure root causes for self-help" (how sweet)... (if it's "well known", why not coding the exception handling correctly?)
The relevant part of the report might be this:
"SCVMM Version=3.2.7620.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7620.0
Executable Name=vmmservice.exe
Executable Version=3.2.7510.0
Base Exception Target Site=140717670746840
Base Exception Assembly name=System.Data.dll
Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
Exception Message=Unable to connect to the VMM database because of a general database failure.
Ensure that the SQL Server is running and configured correctly, then try the operation again."
(side question: what does this mean: "Ensure that the SQL Server is ... configured correctly"?
I can say that :
SQL is configured by the book, that all services are running (did a reboot of VMM server too) and that all other VMM functions work OK. I don't believe that SQL is only used for user-roles...
Acting as Domain admin and VMM admin.
All updates are installed.
Please find the report @the and and a screen shot attached.
Thanks for any help.
Report.txt:
------------------- Error Report -------------------
Error report created 03.04.2014 15:07:56
CLR is not terminating
--------------- Bucketing Parameters ---------------
EventType=VMM20
P1(appName)=vmmservice.exe
P2(appVersion)=3.2.7620.0
P3(assemblyName)=Utils.dll
P4(assemblyVer)=3.2.7620.0
P5(methodName)=Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery
P6(exceptionType)=Microsoft.VirtualManager.DB.CarmineSqlException
P7(callstackHash)=4c11
SCVMM Version=3.2.7620.0
SCVMM flavor=C-buddy-RTL-AMD64
Default Assembly Version=3.2.7620.0
Executable Name=vmmservice.exe
Executable Version=3.2.7510.0
Base Exception Target Site=140717670746840
Base Exception Assembly name=System.Data.dll
Base Exception Method Name=System.Data.SqlClient.SqlConnection.OnError
Exception Message=Unable to connect to the VMM database because of a general database failure.
Ensure that the SQL Server is running and configured correctly, then try the operation again.
EIP=0x00007ffb74c75a88
Build bit-size=64
------------ exceptionObject.ToString() ------------
Microsoft.VirtualManager.DB.CarmineSqlException: Unable to connect to the VMM database because of a general database failure.
Ensure that the SQL Server is running and configured correctly, then try the operation again. ---> System.Data.SqlClient.SqlException: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
--- End of inner exception stack trace ---
at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
*** Carmine error was: DatabaseFailure (2605); SQLServer; 8144
[s#5cf2] ExecuteNonQuery()
[s#5c38] Task`1.SubtaskRun(this: (Task`1#b), TaskID: (guid) 0e1c3e3d-76de-4d8b-bfc2-cbcc400fadf4)
Full call stack from when the exception was thrown: at System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
at System.Environment.get_StackTrace()
at Microsoft.VirtualManager.DB.CarmineSqlException..ctor(SqlException sqlException)
at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
--- SqlException details -----------------
System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
Error = 8144
Index #0
Source: .Net SqlClient Data Provider
Number: 8144
State: 2
Class: 16
Server: localhost\SCVMM
Message: Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
Procedure: prc_RBS_UserRoleSharedObjectRelation_Insert
Line: 0
--- Caller StackTrace -----------------
FileName:; Method:ExecuteNonQuery(); lineNo:0; ilOffset:178.
FileName:; Method:<AddObjectSharingData>b__14(); lineNo:0; ilOffset:12.
FileName:; Method:<HandleInsertErrors>b__3(); lineNo:0; ilOffset:11.
FileName:; Method:HandleInsertErrors(); lineNo:0; ilOffset:6.
FileName:; Method:AddObjectSharingData(); lineNo:0; ilOffset:312.
FileName:; Method:AddSharingData(); lineNo:0; ilOffset:23.
FileName:; Method:AddResourceSharing(); lineNo:0; ilOffset:464.
FileName:; Method:RunSharingSubTask(); lineNo:0; ilOffset:49.
FileName:; Method:RunSubtask(); lineNo:0; ilOffset:23.
FileName:; Method:Run(); lineNo:0; ilOffset:354.
FileName:; Method:RunNewAndSetUserRoleSubtasks(); lineNo:0; ilOffset:166.
FileName:; Method:RunSubtask(); lineNo:0; ilOffset:140.
FileName:; Method:Run(); lineNo:0; ilOffset:354.
FileName:; Method:SubtaskRun(); lineNo:0; ilOffset:221.
FileName:; Method:RunInternal(); lineNo:0; ilOffset:112.
FileName:; Method:Run(); lineNo:0; ilOffset:4.
FileName:; Method:System.Threading.IThreadPoolWorkItem.ExecuteWorkItem(); lineNo:0; ilOffset:0.
FileName:; Method:Dispatch(); lineNo:0; ilOffset:162.
-------- exception.InnerException.ToString() -------
System.Data.SqlClient.SqlException (0x80131904): Procedure or function prc_RBS_UserRoleSharedObjectRelation_Insert has too many arguments specified.
at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParser.TryRun(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady)
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString)
at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds)
at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion, Int32 timeout, Task& task, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(TaskCompletionSource`1 completion, String methodName, Boolean sendToPipe, Int32 timeout, Boolean asyncWrite)
at System.Data.SqlClient.SqlCommand.ExecuteNonQuery()
at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
ClientConnectionId:b85c83f3-e87d-4ec4-af12-41b4dd6ad8cb
--------------- exception.StackTrace ---------------
at Microsoft.VirtualManager.DB.SqlRetryCommand.ExecuteNonQuery()
at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.<>c__DisplayClass15.<AddObjectSharingData>b__14()
at Microsoft.VirtualManager.Engine.DbAccessHelper.<>c__DisplayClass4.<HandleInsertErrors>b__3()
at Microsoft.VirtualManager.Engine.DbAccessHelper.HandleInsertErrors[_RetTy](DbAccessDelegate`1 func, ErrorInfo duplicateErrorInfo)
at Microsoft.VirtualManager.DB.DelegatedAdmin.UserRoleDBHelper.AddObjectSharingData(SqlContext ctx, ITaskContext taskCtx, Guid objectId, CarmineObjectType objectType, AccessControlData accessData)
at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddSharingData(SqlContext ctx, ITaskContext taskContext, LockableObject resource, AccessControlData data)
at Microsoft.VirtualManager.DB.DelegatedAdmin.ResourceSharingHelper.AddResourceSharing(SqlContext ctx, ITaskContext taskCtx, LockableObject resource, List`1 destinationRoles, UserOrGroup destinationUser)
at Microsoft.VirtualManager.Engine.AuthorizationManager.GrantResourceTask.RunSharingSubTask()
at Microsoft.VirtualManager.Engine.AuthorizationManager.ResourceSharingTaskBase.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.AuthorizationManager.UserRoleTaskHelper.RunNewAndSetUserRoleSubtasks(ITaskContext taskContext, List`1 queuedSubtasks, UserRoleData userRoleData)
at Microsoft.VirtualManager.Engine.AuthorizationManager.SetUserRoleSubtask.RunSubtask()
at Microsoft.VirtualManager.Engine.TaskRepository.SubtaskBase.Run()
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
------------- StackTrace from handler --------------
This is the call stack from where the exception was caught, not where it was thrown.
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.WriteReportTextFile(TextWriter reportFile)
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonExceptionReport.Send()
at Microsoft.VirtualManager.Utils.Diagnostics.WatsonCenter.ReportException(Exception e, WERReportOptions options, String& localReportPath)
at Microsoft.VirtualManager.Engine.TaskRepository.Task`1.SubtaskRun(Object state)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
at System.Threading.ThreadPoolWorkQueue.Dispatch()
-------------------- Assemblies --------------------
mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Module=C:\Windows\Microsoft.NET\Framework64\v4.0.30319\mscorlib.dll
Version=4.0.30319.34011
BuildType=retail
Product=Microsoft® .NET Framework
VMMService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\vmmservice.exe
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.ServiceProcess, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceProcess\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.ServiceProcess.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll
Version=4.0.30319.34003
BuildType=retail
Product=Microsoft® .NET Framework
TraceWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\TraceWrapper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Utils, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Utils.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NativeMethods, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NativeMethods.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Common, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Common.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.IndigoAccessLayer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.IndigoAccessLayer.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Core, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Skuhelper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Skuhelper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Errors, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Errors.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Remoting, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Remoting.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Runtime.Serialization, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Serialization\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Serialization.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.Configuration, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices.AccountManagement, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices.AccountManagement\v4.0_4.0.0.0__b77a5c561934e089\System.DirectoryServices.AccountManagement.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel\v4.0_4.0.0.0__b77a5c561934e089\System.ServiceModel.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.Adhc.Operations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Adhc.Operations.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.TaskRepository, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.TaskRepository.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ImgLibEngine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ImgLibEngine.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VmmHelperHost, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VmmHelperHost.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VirtualizationInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VirtualizationInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
NetworkServiceInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\NetworkServiceInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
ClusterUtil, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\ClusterUtil.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
VMWareImplementation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\VMWareImplementation.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManager, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManager.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.AuthorizationManagerTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.AuthorizationManagerTasks.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Backup, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Backup.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.BitBos, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.BitBos.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Management.Automation, Version=3.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management.Automation\v4.0_3.0.0.0__31bf3856ad364e35\System.Management.Automation.dll
Version=6.3.9600.16394
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
WsManWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WsManWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
SqmWrapper, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\SqmWrapper.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Deployment, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Deployment.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement.ResourceModel, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.ResourceModel.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ImgLibOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ImgLibOperation.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Xml, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.CustomProperties, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomProperties.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.VmOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.VmOperations.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.MomDal, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.MomDal.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Web.Services, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Web.Services\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Web.Services.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.PxeServer, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PxeServer.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Placement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Placement.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.P2VCommon, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.P2VCommon.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
PatchExtractor, Version=0.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\PatchExtractor.dll
Engine.ConfigurationProviders, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ConfigurationProviders.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GatewayInterfaces, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GatewayInterfaces.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Microsoft.Management.Infrastructure, Version=1.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.Management.Infrastructure\v4.0_1.0.0.0__31bf3856ad364e35\Microsoft.Management.Infrastructure.dll
Version=6.3.9600.16384
BuildType=retail
Product=Microsoft (R) Windows (R) Operating System
Microsoft.CapacityManager.Modeling.Store.ModelLibrary, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Microsoft.CapacityManager.Modeling.Store.ModelLibrary.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CustomPropertyTasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CustomPropertyTasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.UMOperation, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UMOperation.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Scheduler.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.Tasks, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.Tasks.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.ServiceOperations, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.ServiceOperations.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
GoalState, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\GoalState.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.CloudService, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.CloudService.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
WSManAutomation, Version=3.2.7510.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WSManAutomation.dll
wmiWrappers, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\WMIWrappers.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Transactions, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll
Version=4.0.30319.33440
Product=Microsoft® .NET Framework
System.EnterpriseServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_64\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
SMDiagnostics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\SMDiagnostics\v4.0_4.0.0.0__b77a5c561934e089\SMDiagnostics.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
DB.DelegatedAdmin, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.DelegatedAdmin.dll
Version=3.2.7620.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
DB.TieredPerfCounters, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\DB.TieredPerfCounters.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.PhysicalMachine, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.PhysicalMachine.dll
Version=3.2.7515.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.UpdateManagement, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.UpdateManagement.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
Engine.RunAs, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.RunAs.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.Numerics, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
Engine.DB.Scheduler, Version=1.0.523.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
Module=C:\Program Files\Microsoft System Center 2012 R2\Virtual Machine Manager\Bin\Engine.DB.Scheduler.dll
Version=3.2.7510.0
BuildType=retail
Product=System Center Virtual Machine Manager 2012 R2
System.ServiceModel.Internals, Version=4.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.ServiceModel.Internals\v4.0_4.0.0.0__31bf3856ad364e35\System.ServiceModel.Internals.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.DirectoryServices, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.DirectoryServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.DirectoryServices.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.Management, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.Management\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Management.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
System.IdentityModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089
Location=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
Module=C:\Windows\Microsoft.Net\assembly\GAC_MSIL\System.IdentityModel\v4.0_4.0.0.0__b77a5c561934e089\System.IdentityModel.dll
Version=4.0.30319.33440
BuildType=retail
Product=Microsoft® .NET Framework
--------- Extra Data for Watson Report -------------
Error Reporting Enabled=True
*** Extra Data ***
Process ID = 1500 (0x05dc)
Managed Thread ID = 25
Native Thread ID = 1260 (0x04ec)
Thomas.I (quite honestly) am one of those folks that generally do not read the KB articles associated with a patch or UR or SP - as you don't expect details like have been put into this particular one.
But as Kristian pointed out - within that KB article is the SQL script that modifies / updates this SQL Stored Procedure.
http://blogs.technet.com/b/scvmm/archive/2014/01/29/how-to-update-scvmm-2012-r2-to-update-rollup-1.aspx
Needless to say, the feedback was given to MSFT that folks would overlook that this SQL script needed to be run. So we are just trying to help out.
Brian Ehlert
http://ITProctology.blogspot.com
Learn. Apply. Repeat.
Disclaimer: Attempting change is of your own free will. -
C5180 Ink System Failure hp 0xc19a0024
Hello Everybody,
Recently I moved from one city to another. After one week of that I run my HP C5180 printer. Unfortunately I have until today an error: "Ink system has failed. Refer to printer documentation. Error: 0xc19a0024. Turn power off then on again."
Of course I didn’t find any information in my documentation. Also turn off and on didn't help.
After reset this error (using Manufacturing Key Combo) I can “Print Report” but page is empty.
Full reset to the manufacturing settings don’t help. After “Tools/Clean Printhead” or “Tools/Align Printer”... ERORR 0xc19a0024 appear again.
I called to the HP support, but the printer is out support and I didn’t get answer what this error mean.
I will very gratefully if somebody explain me what the error 0xc19a0024 exactly mean. Any solutions of my problem are also very welcome.
Thank you!Hi andy_b23,
Sorry that did not help, the 0xc19a0024 is an Ink System Failure message. If the guide did not resolve your issue, then the next best option is to please call our phone support at 800-474-6836 for your upgrade/replacement options. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
Best of luck!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping! -
Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide SolutionHi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change................. -
Officejet 6500 ink system failure - hp printers used to be good, but are trash now
I'm so frustrated. I have an Officejet 6500 that gave me an Ink System Failure warning. I read that it probably was a low cartridge and so I replaced the low one - according to the level indicator, it still had ink - and it started working again. Then I got the error again. According to the HP print manager software, all cartridges had ink, but now the magenta looked low, so I replaced it. (As a side note, this printer EATS the expensive high capacity cartridges. I thought it was a good value to buy the higher capacity cartridge, but if I get a dozen pages out of them I'm lucky.)
So now I have tried cleaning the printhead using the manager software, which doesn't work because the printer is still in Ink system failure mode. So I took out all the cartridges, cleaned the printhead - it was inky - cleaned the contacts, reset using the turn on, unplug power cord from printer, from wall, wait 15 seconds, plug in to wall, plug in to printer. Still have the error. Did it all again. Still have the error.
I'm so irritated. I spent good money on this printer, and the expensive HP ink, because I'd had good luck in the past with HP printers. But this one h as eaten up hours and hours of my time and cost me hundreds of dollars in ink alone and STILL WON'T PRINT. Is there some other secret reset method that isn't documented? Some other test I can do? According to the troubleshooting guide, I"m now supposed to replace the printhead, and then if that doesn't work send the printer for servicing. Hello? You told me to replace the ink cartridge, so I wasted expensive ink doing that. Now I'm supposed to replace another part, without any real idea whether it will fix the problem or not? There's no diagnostics on this printer that can figure out exactly what part of the ink system has failed?
If anyone has any ideas how to get this piece of junk to print I'd really appreciate it. I'd love to be able to keep this printer working for a little while longer because I'm trying to get a business off the ground and just don't have lots of unused money sitting around to throw at solutions that "might" fix my problem. I've become so disullusioned with HP. They used to make great products, but now unfortunately the products and the support seem to have gone down the tubes together. I will NEVER buy another HP printer even if they fix the quality issues.Try cleaning the print head with rubbing alcohol wipe, then replace your print head. Keep pushing the Ok.
Go to this link and HP shows you how.
support.hp.com/us-en/document/c01643079
Lucky for me it worked! -
Ink system failure printhead unrecognized
I keep getting ink system failure errors and printhead is missing or unrecognized. I have turned off and restarted the printer and unplugged and replugged the printer. I ran the diagnostics. At first it said there was a printhead problem but now it says everything is OK but it will not print a test page. There was no decline in print quality before it failed. It stopped printing suddenly after printing several jobs perfectly. I was about to buy a new printer when it printed something from a different computer on my network (a MAC), so the printhead and cartridges are actually working fine. Why is there a communication problem from my usual computer? What can I check now?
Hello @Sari44 ,
Welcome to the HP forums.
I understand that your Officejet 6700 has an ink system failure message on it.
I would like to help.
It is odd that you could get a print job from your Mac.
Try going through the following document.
An 'Ink System Failure' Error Message Displays on the Printer or on the Computer
Please let me know how things work out.
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping! -
We have a SOAP to PROXY scenario Which is in Production.
We keep getting the Error:
" Problem while determining receivers using interface mapping: "SYSTEM FAILURE" during JCo call. Bean SMPP_CALL_JAVA_RUNTIME3 not found on host XXXXXX, ProgId =AI_RUNTIME_XXX.
We are using Standard Receiver Determination with single receiver without any condition. And no mapping being used in interface determination.
What are all the possible situation where we face such as this issue in Production.Please check the SAP note
# 1706936 - messages fails with error java.lang.RuntimeException Bean SMPP_CALL_JAVA_RUNTIME3 not found
1944248 - PI unstable due to JCO_SYSTEM_FAILURE mapping issues
Maybe you are looking for
-
Export to excel : Error no class found
Hello Experts, I am facing a problem while exporting the data into excel sheet. DC1 : i have created library dc which contains jxl.jar file in library folder DC2 : j2ee library DC--->DC1 is the used dc in this and DC2 build and deployed successfully
-
I CAN'T upgrade uninstall or install iTunes...Help?
Every time I try to upgrade iTunes to 9.2 or I try to uninstall iTunes or download it and install it again it shows a error message saying that itunes.msi is missing so i can't do it and neither I can run iTunes because it shows an error i got my iPh
-
Ship to party PO number line item field updating in ORDERS IDOC
Hi Experts, We are in the process of creating the Sales order by receiving EDI data from customer and converting in to IDOC format and trying to create the sales order. While executing the ORDERS IDOC message type sales order is getting crea
-
Function Module to Change / Update BOM Line Items
Hi, I need a Function Module to Change / Update BOM Line Items. Please help. Thanks.
-
Hi, I'm a 1st time owner of a brand new 5800, this is my first experience with a touch screen phone and I was wondering since the screen is plastic and I absolutely hate scratches on my phones anywhere but especially on my screen, is there a way to p