Picture appears white (cannot see the image) when using camera raw filter in photoshop cc

I have a fresh install of Photoshop CC on my macbook.  I am running into an issue when editing an image in Photoshop cc and using the camera raw filter.  If I choose the camera raw filter camera raw opens up but all I see is white - the picture is not showing within the camera raw interface.  This happens whenever I am working on a layer and apply the camera raw filter.  The only time it works is when I do not have any layers but only the image as it comes directly from within camera raw - then it works fine.  I'm guessing there is something really basic I am missing but it is maddening!

You are welcome.
The Camera RAW filter will not work on an adjustment layer alone. Select the layer with the image and the adjustment layer and convert to a smart object to apply the Camera RAW filter to the image with the adjustment layer applied.

Similar Messages

  • I updated photoshop cc but I cannot see the updates when I launch photoshop? I have restarted the computer and that still doesn't help.

    I updated photoshop cc but I cannot see the updates when I launch photoshop? I have restarted the computer and that still doesn't help.

    Installing the "Update" installs a totally new version.  The old version of Photoshop CC is still installed.  It is likely you are running the old version.

  • When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG

    When using Camera RAW after editing photo I can only save file as DNG, I want to save as JPEG. HOW??
    THANKS LLOYD

    BARBARA,Yes, you are so right, I was deceived by the eve button,  Just tried it and it WORKS GREAT-Thanks for the help.
    THANKS AGAIN AND HAVE A GOOD DAY Lloyd
          From: Barbara B. <[email protected]>
    To: Lloyd Bennett <[email protected]>
    Sent: Tuesday, January 13, 2015 11:46 AM
    Subject:  When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    When using Camera raw with PS12 after editing, I cannot save my file in JPEG, only DNG
    created by Barbara B. in Photoshop Elements - View the full discussionYou are being deceived by the Save button, like most people. That button is not the Save As button, really, but a link to the DNG converter. To save your raw file in an image format, click the Open button instead and then save in the format of your choice in the editor. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7092207#7092207 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7092207#7092207 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"  Start a new discussion in Photoshop Elements by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • WVC80N cannot see the image with VLC when multicasting

    I am using the WVC80N camera and have set the multicast address to 225.0.0.6 and the port to 2006 but when I try to view the image with VLC I cannot see and image. HTTP and rtsp both work but I need to use multicasting, has anyone gotten this to work?

    When you talk about the multicast , may I know if where is it set? Is it set on the route,server or computer? When you talk about VLC, where you referring to the VLC media player? Is also possible if you will show us a complete diagram on how your network has been setup so that we will be able to provide you the right recommendation.  

  • When I open an image in Photoshop, I cannot see the file.  The thumbnail in on the right, but I cannot see the image on the work area. I am using Windows 8

    When I open Photoshop CS6 I cannot view the image.  The thumbnail is visible on the right hand side and the work area shows the file information, but no image.  I have updated PS, my driver. It is the same for both jpg or RAW.

    Be sure your graphics drivers are up to date. Try disabling GPU acceleration in the preferences then restart Photoshop.
    Benjamin

  • I was at Apple Store yesterday and they created a pages document for me.  When I got home and tried to open it, I get a message that I need a newer version of Pages.  I see the image when I before I push "open".  The 'kind' is pages publication.

    I was at Apple Store yesterday and they created a pages document for me.  When I got home and tried to open it, I get a message that I need a newer version of Pages.  I see the image before I push "open".  The 'kind' is pages publication.  The file does not appear in the 'open recent' list.

    Just be careful with Pages 5, it is not strictly an upgrade.
    Apple has actually removed over 90 features and some work can be very difficult in the newer version.
    It was all done to make it more interchangeable with the inferior iOS version:
    http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&mforum=iworktipsn trick
    Peter

  • Color Settings: Getting colors in PS CC to match colors of the image when used as a Windows Background

    or vice versa. I probably do not know enough to be able to ask the question properly.
    The colors of photos in PS CC are not the same when used as a desktop background in Windows 7. The colors are somewhat more saturated when as a background on the desktop and while not totally unusable, it would be nice to have matching color between my PS editing screen and the photo as viewed as a desktop background.
    The following are some conditions that may or may not be relevant to the answer of my following question.
    1.) I am a complete novice to Color Management so a presumption of knowledge and the heavy use of jargon may not penetrate my head.
    2.) I shoot with sRGB embedded in my photos.
    3.) My RAW conversions use sRGB IEC61966 - 2.1.
    4.) My PS Color Settings are North American General Purpose 2 with sRGB IEC61966 - 2.1 as the working space and Intent as Relative Colormetric
    5.) In the Win 7 Control Panel>Color Management>Device, my Device = NEC LCD2690wuxi, ICC Profile = NEC LCD2690wuxi (default), file name = nl269wui.icm
    6.) In the Win 7 Control Panel>Color Management>Advanced, Device profile = System Default sRGB IEC61966 - 2.1 and (everything else set to System Defaults too). The only difference from the PS Color Settings being that Windows is defaulted to Perceptual Intent, but a change in either PS or Win 7 has no effect on the relative color differences.
    7.) The monitor is set to the Native internal preset, but the relative differences in color remain the same even if the monitor is changed to sRGB, or any other internal preset.
    8.) I have Proof Setup set to Monitor RGB but none of the settings will match the Win 7 Background color.
    Now, my question is this. How would you set up your color settings/profile in PS and/or Windows to match color between PS and the Windows desktop of Windows 7?

    Nevermind. I didn't have Proof Colors checked.

  • How do you crop outside the image in Adobe Camera Raw?

    I would like to create a crop of a portion of an image in Adobe Camera Raw AND include some area outside that image. Is there a way to do this.

    You can't do that in ACR, but you can if you open it in Photoshop and use the crop tool there.
    Gene
    (If this answers your question, mark it correct.)

  • After making a podcast on garageband, i exported the podcast to disk. But when i opened it as quicktime player, i was only able to hear the audio. I cannot see the images that i put on the podcast. Does anyone know why or a solution?

    I already shared it as an AAC Encoder instead of MP3 Encoder, but it still will not show the images.

    Nevermind. I found a solution.

  • I cannot see my photos in iphoto library - I tried to restore with Time Machine and that doubled the number of photos (copies) but I still cannot see the images - the events are there but no thumbnails although the number of pics per event is correct...

    Can someone help me see my pictures again in iphoto? 3 weeks ago while uploading a video from iphoto to Facebook, my events thumbnails all disappeared and were replaced by black squares - the event names and number of pics in each remain but when I click on the event, I only get squares where the pics should be - when I click those squares, I get  a square with a triangle  and an exclamation mark in middle.
    Apple had emailed me about defective disks in iMacs so I took mine to the Apple Store and they replaced my HD then reinstalled from my backup via Time Machine - I still cannot see my pics! I tried to reinstall from an earlier Time Machine date - that copied everything and now my HD has double the amount of data but I still cannot see my pictures!
    I would be thankful for any guidance on how to retrieve my pictures...
    Thank you.

    iPhoto 6 and later: Rebuilding the iPhoto library

  • Reset my airport extreme to factory settings, now getting flashing amber. Airport utility cannot see the unit when it scans. How do I access the unit?

    Reset my airport extreme to factory settings, now getting flashing amber light. Airport utility scan does not see the device, so I cannot access any setup.
    How do I make contact with the unit?

    I found another thread from the June 3rd with the same issue. They seam to have a solution, but I am using windows. Does anyone know how to update older AXs on windows computers?

  • LSMW Recording.. Cannot see the fields when going to Field mapping step

    Hi all,
    I am going a test loading of data with the LSMW and I am doing with a recording.  The transaction I have used is related to my company. 
    When I go to the field mappings step I dont see the field for the target structure with which I can map the source fields..
    What may be the problem.  Let me know.. If my question is solved, I will award appropirate points.
    Thanks,
       -Ken

    Hi Consu,
    Please see, when your recording is over.. it is displayed right?
    The moment it is displayed, there on same screen either click on 'DEFAULT ALL " button on application toolbar or go to menu path edit--> default all.when u create recording u can click on this button but when it is assigned to your project , this option become disabled , so crate a new recording and follow above steps.
    Best of luck
    Thanks,
    Billy

  • How do i see the thumbnails when using File Explorer

    How do I get to see the thumbnail preview when using File > Open?

    Not sure if this has been answered yet, but Illustrator thumbnails aren't showing in Creative Cloud Web file list. Also, anywhere to quick preview/navigator the file?

  • Line along "bottom" of image when using camera on iPhone 4

    Hi all
    So I have a brand new iPhone 4 and everything seems fine, except for an issue when taking pictures with the camera, which I have a sneaking suspicion is a hardware fault. I'm hoping not, but I don't hold out much hope...
    So when I take pictures, I have a line parallel with the bottom (side with the home button) of the iPhone. This appears both in the preview image when taking a shot, and on the saved image. It does not show when shooting video, but I have noticed the image is zoomed in slightly when shooting video, and the line is not in this.
    The line is approximately 1cm away from the edge of the screen. This is not a discoloration, like with the bonding agent, it looks like a line of pixels.
    I have taken a picture, but can't see how to upload it on this forum. If it'll help, I'll upload elsewhere and link it.
    Thanks in advance for any suggestions.

    And also when I completely turn my iphone off it doesn't reboot when I hold the power button in and I had to do a soft reset to make it restart but even when I did that it wouldn't reboot and about 1 hour later when I tried it again it did the screen was white with nothing on it apart from a small oval in the middle of the screen showing my lock screen and it took 4 hours for it to sort itself out and then it started flickering :( :( please someone help what can I do??!!

  • Why can't I see the recovery slider in camera raw of elements?

    I have the most recent version of elements, version 11. The camera raw plug-in is up to date, some 7.4 something. On the online help list and tutorials I have seen, there is a recovery slider. Yet, when I tried to practice with raw files in camera raw, the recovery slider was not there. I tried looking around the window, clicking menus, but can't find it. So where is it?

    PSE 11 has a new 2012 raw engine but you can switch between the old and the new. In the camera raw dialog click on the camera icon. Then change Process to 2010. Then go back to the basic tab.

Maybe you are looking for