Picture backup is also part of the workflow

Hi,
I'm very happy with all new features of v1.1. But I think picture backup is also part of the workflow. It would be very clever to keep track (from inside LR catalog) of where pictures have been backed-up. You'll find solutions like CDFinder/CDWinder, where you build catalogs of CDs/DVDs..., and other like Archive Creator, where the CD/DVD comes with an html catalog embedded. Well, just do both ! LR is allready able to create html galleries, it has everything for handling files and folders. What is missing ? : just one field for a media serial number (DVD# or harddisk#...) and a burning capability.
Anyway that's great what has been done till now. Keep on !
Xavier

Hey Sjup,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with Family Sharing. The following resource provides information if you have trouble viewing/downloading a family member’s purchase content:
If you don't see your family's shared content - Apple Support
http://support.apple.com/en-us/HT201454
Make sure that an app is shareable
To see if you can share an app, go to its product page in the App Store and scroll down to Information. Then see if it says Yes or No in the Family Sharing section.
Some apps may not be enabled for Family Sharing. If you’ve acquired one of these apps, you will be able to see it in your purchase history, but your family members won't be able to see or redownload it.
Thanks,
Matt M.

Similar Messages

How do I remove this "See Also" section on the workflow task page?

How do I remove the "See Also" section that lists other files.

How do you get this, i tried on my task list but no luck?
Thanks -WS SharePoint administrator, MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog *Please remember to mark your question as "answered"/"Vote helpful" if this solves/helps your problem.*

How long should the backup take as part of the iOS 5 update?

Any ideas why my iOS5 update can't get past the backing up stage? I've left it running for 12 hours, but the update process never gets past the scrolling message about backing up.

Well at last its done! I ended the current restore, backed up to icloud instead of itunes and then did a full restore. Hey presto! 10 mins later everything was tickity boo! all contacts, calenders music and even the photos were back! Needless to say I wont be getting the new iphone on my upgrade! Getting very fed up of the crap that goes along with it. Time for an andriod phome me thinks! Sorry apple but this is definitley one customer that you've lost!

There is a tag with a star on my display picture. It covers part of the picture and I want to get rid of it. How do I do it?

Thanks, I did subscribe to no ads. So to get rid of that, I need to Unsubscribe.

That means you have subscribed to BBM premium subscription services like No ads, custom pin or privacy and control.

What part of the registry is related to SAPI?

system mechanic pro is incompatible with windows 8.1 64bit. Means programs like adobe reader and foxit reader and Babylon can not use windows TTS engine.
This is because registry changes, because I'd undo the registry will solve the problem.
Systems mechanical and Windows are both updated.
Can you tell me what part of the change in the registry is causing this problem?
I want to make a
backup of that part of the registry
,and I'll
fix my other windows that I
can not undo the registry edited.

Hi,
I think this issue can be caused that if the older version of system mechanic is not compatible well with Windows 8.
http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=System%2BMechanic&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14
As following article, version 12 is released to improve the performance in Windows 8.1:
System Mechanic Version 12 Now Available, Includes Enhancements for Windows 8.1
http://www.maximumpc.com/system_mechanic_version_12_now_available_includes_enhancements_windows_81
Note: this third part website is not on behalf of Microsoft.
Thanks for your understanding.
Kate Li
TechNet Community Support

Picture Library Slideshow Web Part

I am able to create a slide show via Picture Library Slideshow Web Part but the title and description will not show up. I have tried all the options but
only the picture shows and not the picture title. I was hoping to have the picture title appear below the image. Can this be fixed or is it something I have to do without?
Thank you.

Hi Sarah,
According to your description, my understanding is that you want to show Title of the image under the image in Picture Library Slideshow Web Part.
I recommend to edit the Picture Library Slideshow Web Part and select Title only below image under Display with and make sure that the picture in the picture library has value in Title field.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

InDesign only showing part of the image

I'm doing a job for a client in InDesign CS5. I have not worked in CS5 before, so don't know if this is a bug or if I'm doing something wrong.
It seems to happen randomly and I have checked the preferences and tried using different settings for the Display Performance. I've even tried viewing the job with Overprint Preview switched on.
When placing images only a part of the image shows. When I output to PDF or Print the file then the entire image shows. This makes it very hard to do layouts, especially in cases where I need to crop an image.
In InDesign it looks like this:
When I output to PDF (this is a low res output, just to demonstrate my point) the entire image shows:
In InDesign it looks like this:
When I output to PDF:
The machine I'm ding this job on is an iMac, 2.66GHz Intel Core 2 Duo with 4GB 800MHZ DDR2 SDRAM. It is running Mac OSX 10.6.4. And InDesign is on version 7.0.2.

mafeiteng wrote:
I'm doing a job for a client in InDesign CS5. I have not worked in CS5 before, so don't know if this is a bug or if I'm doing something wrong.
It seems to happen randomly and I have checked the preferences and tried using different settings for the Display Performance. I've even tried viewing the job with Overprint Preview switched on.
When placing images only a part of the image shows. When I output to PDF or Print the file then the entire image shows. This makes it very hard to do layouts, especially in cases where I need to crop an image.
In InDesign it looks like this:
When I output to PDF (this is a low res output, just to demonstrate my point) the entire image shows:
In InDesign it looks like this:
When I output to PDF:
The machine I'm ding this job on is an iMac, 2.66GHz Intel Core 2 Duo with 4GB 800MHZ DDR2 SDRAM. It is running Mac OSX 10.6.4. And InDesign is on version 7.0.2.
If I understand things correctly, you're placing client-supplied images into a new InDesign file that you're creating, so the only part of the workflow that you haven't created is the graphics. This logically leaves the container file innocent.
The question becomes "what's up with either the hardware or the graphics?" If the problem persists with the same graphic files and a new container file on a different user account on the same computer, it's possible that hardware is the villain. If it doesn't persist on a different computer, it's likely the hardware. If it does persist on a different computer, in a new container file, it's likely something in the graphics files.
It's not clear if the graphics card in your iMac is one of the models whose video RAM is "dedicated," that is, it doesn't share video RAM with the main RAM, or if it does share VRAM. If it shares RAM, it's possible that 4GB isn't sufficient to display all the open applications and their demands. If this is the cause, it's a hardware issue (insufficient RAM.)
Because the graphics print and convert to PDF without the problem, it would seem that the graphics are innocent, but perhaps something in the processing of these outputs causes the problem to disappear. For example, perhaps there's some flattening involved. Perhaps there's a clipping path or channel mask of some kind involved that affects the InDesign display? (Just fishing.)
Have you tried opening the graphics in their creating application and saving them to new names? Any difference in the behavior when those graphics are freshly-placed in InDesign, or when their links are updated?
Have you tried placing PDFs of the graphics? If they appear properly, can you crop them to achieve your requirements and hope the problem goes away after the deadline passes<G>?
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

No records for the workflow after Import

Hello all,
I created a workflow which is triggered after an import I have no records in the workflow.
For sure I added the worflow in the configuration of the Import Manager. I also added in the workflow the trigger action "after import". Nevertheless, the records have been imported but they haven`t been added to the workflow.
The strange thing i sometimes works and sometimes just not.
Kind regards and thanks for any help,
Peter

Hi Peter,
If you are trying to work with workflow on automatic importing there are a couple of configuration you need to set up before it works fine
1) As you said you have given the workflow name in the import manager config options that means you are trying for automatic import in this case check to see that you MDIS is configured properly or not.
2) In the workflow table you need to set the properties correctly such as, set the trigger action to Record Import this will run your workflow each time a record is imported.
3)Set the Worflow as Active
4)Set the launching to immediate this will launch th eworkflow immediately as your rrecord gets into Data manager.
If all these options are set right then I dont think there is any reason your workflow for Record import should not work
Hope it helps
Reward points if found useful
Thanks & Regards
Simona Pinto

Workflow 2013 change user executing the workflow

In a new workflow 2013, I would like to have the entire or part of the workflow to run under the id of a user that is not executing the workflow. The id of the user would have higher permissions than the user that is actually running the workflow and
would have at least 'edit' permissions. I would like to run the workflow under a different user so that the person that is executing the workflow will have permissions on the custom list that they submitted to the workflow set to view only. Thus
once the permissions on the custom list are set to view only, the workflow would need to run as another user.
Thus can you tell me and/or point me to a link that will display how to execute a workflow 2013 with a different user that did not start the workflow? Basically the workflow would be run by a user that did not start the workflow.

Hi scampsman,
As dmadelung said, Impersonation step is unavailable in SharePoint 2013 workflow, you can create a workflow using SharePoint 2010 platform, and use Impersonation step in this 2010 workflow.
If you want to use the function in SharePoint 2013 workflow, you can use "Start a List Workflow" to trigger the SharePoint 2010 workflow in SharePoint 2013 workflow.
More information about How to trigger a SharePoint 2010 workflow from a SharePoint 2013 workflow, please refer to the link:
http://blogs.msdn.com/b/sharepointdesigner/archive/2012/08/18/how-to-trigger-a-sharepoint-2010-workflow-from-a-sharepoint-2013-workflow.aspx
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Pictures previously included as part of an email are no longer there. If I forward the email to another web browser the picture is there. This just started happening after my last upade and I do not know why.

For some reason pictures that have been included in emails as part of the email are no longer there. This seems to have happened after my last update of firefox. If I forward the email to another web browser on my computer the picture is then visible as part of the email. The pictures I am talking about are not ones attached for me to open but ones that are included as part of the email.

See:
* http://kb.mozillazine.org/Images_or_animations_do_not_load
* You can see the permissions for the domain in the current tab in Tools > Page Info > Permissions
* You can check the exceptions in Tools > Options > Content: Load Images > Exceptions
* You can check the Tools > Page Info > Media tab for blocked images (scroll through all the images)
There are also extensions (Tools > Add-ons > Extensions) that can block images.

SharePoint 2013 shows the same picture library after add more than two picture library slideshow web part in one page.

The environment is SP2013 with SP1, I had check the KB, but don't have any hotfix about this.
I had try it on the different fram, also the same result.
I try it on sharepoint online is work. So I think that must have hotfix about this.
I find there is someone have the sam problem.
http://sharepoint.stackexchange.com/questions/70944/picture-library-slideshow-issue-with-multiple-libraries
Some snapshot about this :
Vinci Wang

Hi Vinci,
Thanks for posting your issue, This is a known issue in 2013. You could have multiple slideshow
webparts on a page in 2010, but it won't work in 2013. As of now there is no hot fixes for this issue. you can try code mentioned in below URL
https://social.technet.microsoft.com/Forums/sharepoint/en-US/5ca65f7f-770b-4b0f-8e40-d08578a6442b/sharepoint-2013-picture-library-slideshow-web-part-image-not-displaying-correct-size
Also, check out below mentioned URLs to know more about this issue and fixes
http://sharepoint.software.tech.answers.ninja/post/70944
https://social.msdn.microsoft.com/Forums/office/en-US/63b2ce8c-5f31-4a39-934e-6d759e9afa0c/picture-library-slideshow-web-part?forum=sharepointgeneralprevious
http://blog.vgrem.com/2013/04/27/beyond-the-slideshow-web-part-capabilities-in-sharepoint-2010/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

HT201302 please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data

please help.. i lost all the data in my ipad after upgrade to ios 702 i want my 3500 pictures back.. please help.. because my i tune also dont have the data. please anybody help me...

Only possible if you have made an iTune or iCloud backup before the update.

Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program

Hi,
Execution of workflow automation failed due to "Could not find a part of the path 'D:\Program Files\NetApp\WFA\jboss\standalone\tmp\wfa\workflow_data\35517.xml"
Netapp case has been raised and confirmed there is no issue with the WFA application, no clue to diagnose the issue.
Execution fails continously 3 or 4 runs then get success, intermittent failure occurs.
WFA version :2.2
OS: Windows 2008
Can someone please help me to fix the issue?
Thanks
Deepak

Parag also pointed out that the BURT number is 833488 which has been fixed in 3.0.Please read the public report for more details. RegardsAbhi

When you backup an ipod touch 4th generation, Does it also back up the music

I have a ipod touch 4th generation and i have backed it up onto my brothers laptop about 1 week before i broke the plug for the screen on the motherboard, So now its getting repaired just need to get the parts for it to get it fixed. Since i have backed it up will it also backup my music and photos, im not worried about everything else just i dont want to find all the music all over again

The statement "(it's not actually part of the backup but will automatically be redownloaded from the iTunes store when you restore)." only applies if you restore from an iCloud backup. If yo restore from an iPod backup made by iTunes you have to manually redownload the music
Downloading past purchases from the App Store, iBookstore, and iTunes Store

How can I make a picture fit entirely in the photo box in a book. The picture size is small, but the it only shows part of the picture, and the zoom is all the way down.

I am trying to make a Photo Book using IPhoto for my granddaughter's wedding. I am using 6 pictures per page, as I have many pictures to add to book.
The picture size is small. But when I zoom is all the way down to the end to make smaller. Doesn't go far enough. When I try to put a picture in the square spot, it cuts off part of the picture. Has anyone else had this problem, and could help me out. I really would like to put on each page even more pictures, but that is not an option with IPhoto. I have used other sites to make books. This is my first try with IPhoto. I may have to revert to the old familiar ones. Wanted to give this one a try. My granddaughter leaves for Germany on the 21st to join her marine husband. I am quickly running out of time. (The wedding was this past Saturday)

Place it the book, right click on it and fit to frame
LN

Picture backup is also part of the workflow

Similar Messages

Maybe you are looking for