Picture corruption - color bar on right side.

My basic setup is as follows.
Running XP Pro and Photoshop CS3 (including Camera Raw plugin 4.4.1)
Run above software with color management profiles for 2 monitors, LG L1710B (1280 x 1024 resolution) and Eizo CE210W (widescreen display) (1680 x 1050 resolution).
Display adapter is Radeon X1600, with Catalyst Control Centre and driver (maintained up-to-date with latest release).
The observed problem exists ONLY when running Photoshop CS3 (although RAW files are accessed also by other software).
Under Photoshop, RAW files may be opened in one of 2 ways.
A) Opened in Camera Raw through Bridge CS3:
B) Opened in Camera Raw through Photoshop CS3:
All RAW images opened under Bridge CS3 display perfectly on both monitors.
Images opened under Photoshop CS3 and displayed on the L1710B monitor are satisfactory.
All RAW images opened under Photoshop CS3 and displayed on the Eizo C210W monitor show the fault. Please note this relates ONLY to RAW images - no problem with tif or jpg. Also, when the picture is later saved (as tif or jpg),it does not contain the erroneous color band - the problem appears to be one of diplay only!
To explain the fault: the defect appears as a vertical stripe positioned on the right side of the PICTURE area, of slightly different brightness/color shade to the main part of the displayed picture.
I have referred the problem as fault report to:
1. AMD re Radeon adapter/driver and Catalyst: they have investigated over a 4 week period, and reply that the problem is elsewhere.
2. EIZO re Monitor (no separate driver outside of Windows), who say the problem is not monitor related.
3. Adobe re Photoshop, who relate the matter to AMD as supporters of the display driver.
4. AMD have (in the past) suggested that it is not a problem for referral to Microsoft!
Therefore STALEMATE! How do I get this resolved?
After long and careful tests I have undertaken, I have a theory on the cause of the problem which goes so:-
I believe the image on the Eizo is properly being color corrected with the color profile applicable for that monitor. However, I believe the size of the color correction mask being applied is being taken from the screen parameters of the L1710B display. This results in a color correction "overlay" area of 1280 x 1024 being imposed on the Eizo screen of 1680 x 1050 - justified from the left edge. This causes a strip on the right edge of (1680-1280) 400 to appear non-color corrected! In actual practice, the position of the left edge of the color stripe does appear 3/4 way across the screen, which supports this postulation! Also, if I vary the color profile, the screen effect (tone wise) does slightly change, causing the stripe to either more or less prominent.
I would personally conclude the matter to be within Photshop CS3. The fact that the RAW module running under Bridge produces NO PROBLEM, while the (same) RAW module running under Photoshop produces the fault suggests to me that the RAW module is being preconditioned in a different way by the respective softwares.
I will be pleased to benefit from thoughts of others - and also to receive ideas as to where I should next direct my fault reports.
While I am at lease able to view/process RAW files through the Bridge route, in an ideal world I should be able to do the same though Photoshop!
Thanks - Eric

Well My Friend, i changed the two cartridges and everything looks beautiful now
thank you so much for helping & trouble shooting the problem with me....
HP has great tech support!!

Similar Messages

I just install Photoshop CC. I try to open the file picture. All open as solid black picture. But on the right side under layer I can see little pic preview. Please help!

I just install Photoshop CC. I try to open the file picture. All open as solid black picture. But on the right side under layer I can see little pic preview. Please help!

These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
More information needed for someone to help... please click below and provide the requested information
-Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
•What is your exact brand/model graphics adapter (ATI or nVidia or ???)
•What is your exact graphics adapter driver version?
•Have you gone to the vendor web site to check for a newer driver?
•For Windows, do NOT rely on Windows Update to have current driver information
•-you need to go direct to the vendor web site and check updates for yourself
•ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
•nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

Display got discolored 2" bar on right side

Hi,
A strange thing has happened. My iMacG5 20" suddenly and without apparent reason displays a discoloration of 2" wide, from top to bottom, on the right side. Inside that 2" wide bar white becomes greyish and my folders seem to be polarised. Have tried to make new account, but problem remains. This problem started lets say two weeks ago, but went away until now. Now the problem seems to persist. Is this the video problem as meant in the repair extension program? Or could it be something I can fix myself? Please advise!
Thanks in advance and greetings from Amsterdam.

to Steve: This is exactly the same problem as with my iMac. How old is yours? By the way I now know a lot more about this issue. The 20 inch LCD screen is devided into 12 segments. It appears that our iMacs suffer from a defective segment. Any of these segments can become defective or even break down completely. If that happens the broken down segment gives no image whatsoever. If you bring your iMac to Apple, like I did, they will say the screen is dead and needs to be replaced. If your machine is outside their 1 year warranty and has no extra AppleCare, they will charge you appr. 700USD for a new LCD panel (Apple part nr.661-3609) or even more for the panel in the bezel (part nr. 661-3318). The thing is that the panel used in this iMac, the LG.Philips LM201W01(A5)(K1), has a standard 3 year's limited warranty. So I am now trying to find out if a longer warranty period is applicable if the panel is not mounted in the Apple iMac. I sure hope so! Secondly, Apple could be forced by European law to extend their warranty to 2 years, that is in certain cases. But this only applies in Europe, of course.
Regards, Ernst

Why is their a black bar on right side of last frame?

Since the most recent update I have black verticl bar on the right side of the last frame in Premiere Pro CC. I have tried cutting, reducting expanding, everything I can think of, but to no avail. Has anyone else experienced this and if so, do you know the remedy? This is causing me to have 3 projects falling behind.

Feel free to tell the team how you feel.
How about letting us have "the teams" "social media" addresses and we can really have a discussion about this.
Isnt that the way it works these days?
Feature Request is just a "hurdle of convenience" and this site should be serving the purpose in its own right.
ie. Users providing (valuable) free opinions from experience ... directly to Adobe. (and the NSA)
I hate the pointless "end of sequence" indicator if my many posts on the matter happened to have slipped by anyone who cares.
To date...still no one defends its inclusion in Premiere Pro. Not even "the team" !

Picture is off to the right side

I have my Apple TV working pretty well, but all of the content is far off to the right side of my Sony HD television. The Sony settings let me fix it a little bit, but there is still content missing to the right side of the picture and lots of blank space off to the left of the picture. Is there a setting in the Apple TV where I can adjust the horizontal position of the picture?
Thanks
Mac mimi Mac OS X (10.3.7)

In the settings menu of Apple TV , at the top is 720P HD and 1080i HD. Using those settings on my Pioneer 50 in Plasma TV made the picture not center.
Lower down in the settings list is 720P 50Hz and 1080i 50Hz. Choosing those settings fixed the problem, and the movie I was watching is now centered.

Mpeg2-dvd render color stripe on right side

When I render HD720p video to mpeg2-dvd (23.976) I end up with a thin color stripe on the right side of the output video. The stripe usually appears wherever I have a crossfade between images/videos. How can I solve this problem>

Thanks Ann,
I have not had this problem since upgrading to CS6. This is my 40th project and the only one with this problem, so far. I've check and rechecked everything and the compositions/setting, etc. are consistent from project to project. All comps and source files are 23.976. No scaling was used.
As you suggested, the issue is with the crossfade. Unfortunately, I cannot always overlap the clips because of the audio portion (I need to crossfade the video only). These are people interviews where I've had to edit out a short segment (say 7 seconds), then rejoin the clip by butting then together to reconstruct the audio. Any ideas for thIs?
Thanks again,
Steve

Strange vertical bar at right side of screen.

Booted up in the afternoon after everything being normal in the morning. The logo and loading wheel were slightly to the left on start up and when I went to enter my password, there was a faint line down the right hand side of the screen (about 1.5" in) and the image seems to blur horizontally from there. When I got into my desktop, the toolbar had also been pushed off the bottom of the screen. The touchscreen of the blurry section still works.
No idea how it happened (as I said, it was fine when I left) and hoping it can be fixed!
Thanks!

Hi there
If you like you can do a System restore to a previously known good state.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=in&lc=en&docname=c03327545
Alternatively try uninstalling current graphic driver from Display adapters section in Device Manager & reinstalling the latest Graphic driver from your HP support page.
Then restart the system, check.
Regards
Visruth
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Color running on right side of entire paper

why are all of my documents that im printing have color running on the entire document from top to bottom. i used the icon on the printer to perform a cleaning and the color still running on the entire paper

Well My Friend, i changed the two cartridges and everything looks beautiful now
thank you so much for helping & trouble shooting the problem with me....
HP has great tech support!!

Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen

I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen. I believe I must have hit a button that moved the picture to the far right.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

Color Laserjet 3600 PQ print quality test pink shows faded on right side

All the color print outs have this somewhat faded color on the right side.
When I ran the PQ test under troubleshooting it shows on the pink page missing color pink towards the right side.
fades into white / blank. Already changed the toner and still happens. I calibrated that printer twice and still occurs.
what else can i do to fix this?

Hi ProspeorusCE,
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
Here is the link to the Commercial Laserjet board:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

The bottom part of display whiter than the rest, white on right side more brownish

So I got a new replacement of my Thunderbolt Display, this time the one I got is straight (previously left side was lower than the right side), however I can see in new one that the bottom part of the display seems to be more white (you can see a slight horizontal line at the bottom) and also on the right side of the display white colour seems to be more brownish.
I have been wondering if that is acceptable for Thunderbolt monitor? Is that a backlit bleed on white? Can you see anything on the photo I have made or am I going slightly mad?:) Please help.

The display uses LED technology which means there will be some bleeding or clouding of light on dark backgrounds (mostly from the edges). You should not have any brown color on the right side as your image shows unless perhaps you need to make some adjustments on your graphics card. I use mine with a 2012 Mini and it has good colors.

How to bring commandMenuItem to the right side of the MenuBar (Menu2)

Hi All,
I need to display the command menu item in menu bar to right side.
Currently
CommanMenuItem in Menu Tab by default is on the right side
and CommanMenuItem in Menu Bar by default is on the left side.
I need CommanMenuItem in Menu Bar to be on the right side or
CommanMenuItem in Menu Tab to be on the left side.
Thanks & Regards
Vimalan Balan

Dear Friend,
Please find the code snippet.
<f:facet name="menu1">
<af:menuTabs var="menuTab" value="#{menuModel.model}">
<f:facet name="nodeStamp">
<af:commandMenuItem text="#{menuTab.label}" immediate="true"
action="#{menuTab.getOutcome}"
rendered="#{menuTab.shown and menuTab.type=='default'}"
disabled="#{menuTab.readOnly}"/>
</f:facet>
</af:menuTabs>
</f:facet>
<f:facet name="menu2">
<af:menuBar startDepth="1" var="menuTab" value="#{menuModel.model}">
<f:facet name="nodeStamp">
<af:commandMenuItem text="#{menuTab.label}" immediate="true"
action="#{menuTab.getOutcome}"
rendered="#{menuTab.shown and menuTab.type=='default'}"/>
</f:facet>
</af:menuBar>
</f:facet>
So, If i click arabic link in home page means menubar item should be in left side.
Thanks & Regards
Vimalan Balan

Using footage from my iPhone 4, how can I remove the black bars on the sides of my picture? Or change the color to white...

My footage is vertical and there are two black bars on the side filling in the rest of the picture. I want to imbed this into PowerPoint without the black bars on the side. Any suggestions on how I can remove them or at least change the color to white? I changed the background color in View > Background > White, but it was only for editing purposes and didn't keep the color after rendering.

To change the background to white, in FCE, place the video on track V2 and place a color matte generator on track V1. The default color for the color matte is grey so you'll need to change it to white using the color picker.
-DH

When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?

When I click on a picture or map in i.e. Kijiji real estate pages, Firefox opens it all crunched to the right side of the page. How can I correct this?
For instance I view an apartment ad which has various pictures attached. It says click on the pictures to see an enlarged version. FF opens the page however most of the page is blank and the picture appears to be pushed to the right side of the page and shows as if it has been scrunched agains the right side not showing the whole picture.
What Can I do to correct this?

I see that you have increased some font sizes considerably.
* font.size.fixed.x-western: 20
* font.size.variable.x-western: 22
This can effect margins when the website specifies these as em values and cause content to shift.
If you have made changes to Advanced font settings like increasing the minimum/default font size then try the default minimum setting "none" and the default font size 16 in case the current setting is causing problems.
*Tools > Options > Content : Fonts & Colors > Advanced > Minimum Font Size (none)
Make sure that you allow pages to choose their own fonts.
*Tools > Options > Content : Fonts & Colors > Advanced: [X] "Allow pages to choose their own fonts, instead of my selections above"
It is better not to increase the minimum font size, but to use an extension to set the default page zoom to prevent issues with text not being displayed properly.
You can use the NoSquint extension to set font size (text/page zoom) and text color on web pages.
*NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/
Note that your System Details List shows multiple Flash plugins.
* Shockwave Flash 16.0 r0
*Shockwave Flash 12.0 r0
You can find the installation path of all plugins on the <b>about:plugins</b> page.
*http://kb.mozillazine.org/Issues_related_to_plugins#Identifying_installed_plugins
You can check the Flash player installation folder for multiple Flash player plugins and remove older version(s) of the plugin (NPSWF32) and possibly (re)install the latest Flash player.
*(32 bit Windows) C:\Windows\System32\Macromed\Flash\
*(64 bit Windows) C:\Windows\SysWOW64\Macromed\Flash\
Your System Details list shows that you have a user.js file in the profile folder to initialize prefs each time Firefox starts.
The user.js file is only present if you or other software has created this file and normally it wouldn't be there.
You can check its content with a plain text editor (right-click: Open with) if you didn't create this file yourself.
The user.js file is read each time Firefox is started and initializes preferences to the value specified in this file, so preferences set via user.js can only be changed temporarily for the current session.
You can delete this user.js and rename (or delete) the prefs.js file to reset all prefs to the default value including prefs set via user.js and prefs that are no longer supported in the current Firefox release.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences

Iphoto shows pictures right side up when I upload to myspace its crooked.

I'm having a problem in which my pictures in iphoto are right side up yet when I load them to myspace they are rotated. I have taken the pictures with my iphone, and I cant seem to figure out the problem.

Karl:
The iPhoto and many cameras have an auto-rotate feature that add a tag to the photos telling other applications that can read that tag which orientations to display it. I don't believe that feature can be turned off on the iPhoto so you will have to do a manual rotate of the file before uploading to myspace. You can do that by exporting to the desktop and using the free contextual menu application PhotoTool CM to losslessly rotate the file in the direction needed. A good way to check the file is to drag it into a Safari window. Safari does not read the tag so will display the physical orientation of the file.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

Picture corruption - color bar on right side.

Similar Messages

Maybe you are looking for