Picture fading on 1/4 of screen

Have this 40 inch for about 8 months and am noticing a light band on the right side of the picture. What can be done about it. Its is noticeably lighter about 6-8 inches from the edge. Can it be fixed, or replaced under warranty, it ends in november 11. Please show me a link to getting this resolved. Thanks. T

Similar Messages

I can't figure out how to resize my picture for my home or lock screens.

I can't figure out how to resize my picture for my home or lock screens. It shouldn't be his difficult. Any suggestions? I'm running the latest software. Thanks.

whichever app store you are connecting to, hyou need a credit card with an address in that country. Also, itunes gift cards must be in local currency too.
If you are in japan, you need to use the japan app store

I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

I can no longer see my pictures.....the screen is white boxes but when I click on the box an exclamation point pops up. Please Help!!!!

The exclamation point occurs when iPhoto breaks/loses the file path to the original file. So try the following: make a temporary, duplicate copy of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot AND
the option to rebuild the small thumbnails.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
OT

Xr2 v3-p remote where is the zoom button tv picture is to large for the screen

I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.

themamalama wrote:
I have just gotten a replacement dvr box and subsequently I have a new remote. The picture is to large for the screen. My old remote had a zoom button. This xr2 v3-p remote does not. I searched the forums and older postes say to press xfinity and then find the gear. My remote doesn't do that either.
For your Cisco/Scientific-Atlanta brannded DVR, it sounds like the user settings may need to be adjusted.
To access the user settings, turn OFF your set-top box; it will remain in standby mode.
Press (Guide) on your remote while the set-top box is in standby mode. OR press Channel Up + Channel Down simultaneously on the front panel of the set-top box.
Scroll to TV TYPE and choose the appropriate setting for the TV: 4:3 Letterbox, 4:3 PAN/SCAN or 16:9 widescreen
Scroll to HDMI/YPbPr OUTPUT and change it to either 480p std, 480i std, Pass Thru or 1080i
Scroll to 4:3 OVERRIDE and select 480p

Lightroom have you ever got a picture name pop up on your screen then another pop up telling you to close lightroom down ? help please !

I've currently been using been lightroom 3.2 64-bit as my raw manager and official marker for quite a fair few years now, so long I've forgot . .
I know that lightroom has gone up to 4 and higher but I'm doing fine anyway ...
today I needed to mark a picture and a problem cropped up ! ...
first I shutdown the computer and I thought it would just re start from there scratch . .
but no ..
I've tried re-install using the actual software disk and that is a no
I've now got the point where by if I click on the lightroom icon on my desktop it produces my picture name 3 quarters up the screen ,
as    " lightroom opening catalog : Flight and Speed, Albefiera , Portugal ,JPG.LRCAT
than later on below a larger window bordered "adobe photoshop lightroom 64-bit"
saying      windows can check online for a solution to the problem.
             -> check online for a solution and close the program
             -> close the program
          V view problem details
Problem signature:
Problem Event Name: APPCRASH
Application Name: lightroom.exe
Application Version: 3.2.0.10
Application Timestamp: 4c69066d
Fault Module Name: MSVCR100.dll
Fault Module Version: 10.0.40219.325
Fault Module Timestamp: 4df2bcac
Exception Code: 40000015
Exception Offset: 00000000000761c9
OS Version: 6.1.7601.2.1.0.256.1
Locale ID: 2057
Additional Information 1: 7ca5
Additional Information 2: 7ca59d909df4ff9ce7becbdd4d760b48
Additional Information 3: 223f
Additional Information 4: 223f678575c9291349fad229d1f7de8b
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409

You’ve tried to open a JPG as a catalog and LR can’t do that, but it also doesn’t know what to do, now.
Try to delete your preferences file, which is where LR remembers what catalogs it’s opened, and then, hopefully, you’ll be able to open your actual catalog, again. The location of the preferences file for LR3 is here:
http://helpx.adobe.com/lightroom/kb/preference-file-locations-lighroom-3.html
I think you got into this situation by dragging-and-dropping a JPG image onto LR’s shortcut. LR opens catalogs not images, so when you drag-and-drop an image onto LR’s shortcut it tries to open that image as a catalog, and it can’t.
Newer versions of LR won’t even try to open an image as a catalog, instead of getting stuck like yours is.
I have some vague memory of your situation not being easy to get out of, so maybe deleting the preferences file won’t actually fix it.

When I FaceTime friends in Tenerife, the video is on for a few seconds then their picture freezes followed by a blank screen with a Poor Connection message. When they Facetime back, the video is perfect. Has anybody any ideas?

When I FaceTime friends in Tenerife, the video is on for a few seconds then their picture freezes followed by a blank screen with a Poor Connection message. When they Facetime back, the video is perfect. Has anybody any ideas?

I had this same thing happen to me. I was using my brand new iphone 5 (texting and listening to music through the speakers) when it flashed the apple logo, stopped my music and brought me to the lock screen.

My picture is not fitting on the screen

When I use the hdmi input on my pavilion 27xi the picture does not fit on the screen. I have tried other devices and different hdmi cables to check that none of them were faulty but they werent. On the monitors image control settings there is fill to screen or fill to aspect ratio which cant be sellected. Is there any soloution??

stevblair97
Welcome to the HP Community Forum.
There is a solution in Windows and Linux; there may be a solution in OSX if you can get to the graphics controller on your Operating System and adjust the Aspect Ratio within the graphics controller software.
For example, NVidia and Intel provides software within Windows and / or Linux that allows one to adjust the monitor Aspect Ratio for primary and secondary monitors.
For Example:
In Windows, assuming one is running an Intel Driver, one need only Right-Click on the Desktop to gain access to the Intel Graphics Properties. While obviously different in OSX; it should be reliatively as easy to find the Graphics software, assuming you have access to it at all.
I am sorry I do not speak Mac else I could be of more direct help in the matter.
I hope this helps in some way.
Click the Kudos Thumbs-Up to show you appreciate the help.
I am pleased to provide assistance on behalf of HP. I do not work for HP.
Click Accept as Solution when the Answer provides a Fix or Workaround!
Kind Regards,
Dragon-Fur

CS6 Photoshop cannot access layer by clicking on the part of the picture I want on the main screen

I cannot access a layer by clicking on the part of the picture I want on the main screen I have to go into the layer panel and never use to have to what happened?

I use Photoshop CC 2014 on my Macbook, I don't know your setup, but first I have to select the Move Tool and in its' Options bar, I would checkmark "Auto-Select: Layer".
If you have and it's still not working, right click on that Move tool icon and select "Reset Tool" from the pop-up menu.
Gene

I converted a pdf file to the web but it moved me the picture to the left of the screen

Hello Friends
I converted a pdf file to the web but it moved me the picture to the left of the screen
Why does this happen?
have a nice day!

thanksssssssssssssssssssssssssssssssss@@!!!!
You were helpful to me
And another small question
In my web(http://josephones.com/)
At bottom left corner
You can see four text fields
How can I make this contact form?

Picture fading to a new screen

Hi everyone..
i am doing a MIDP J2me java project and i would like to noe if it is possible to do a fading effect in MIDP..
wad i have in mind is that when i start my application, a picture would be seen and it slowly fades away and the main menu would be shown.. is it possible and how do i go about doing it?
thanks alot.. i really appreciate if anyone can help me.. =)
cheers..

Thanks for your reply. Yep the zoom is off. I suspect it's the screen but it's so weird that it's not constant. I'll ring the insurance tomorrow but will prob get stung with another £50 excess. Oh well. Anyway. Thanks for your help.

I am trying to connect my mac book pro to the tv via a mini display port and a hdmi cable, the only picture that is on the tv screen is the background picture on my computer, any suggestions?

I am trying to connect my mac book pro to the tv via a mini displayport to a hdmi cable, the only picture on the tv screen is the background picture of my mbp, does anyone know what I need to connect to my samsung tv ?

Hi there. I also bought an iWires mini Display port to HDMI cable and have an LG LED/LCD TV. I plugged it in to my MB Pro and followed the very small writing that came in the package and got both audio and video going. You need to change the audio settings from within System Preferences on your Mac to select your TV as the audio output.
My concern is the data latency - do you experience a delay between moving your mouse on the MBPro and the TV displaying the movement? It is only a fraction of a second, but certainly enough to be annoying, especially in a cable as expensive as the iWire.

When I try to put a PNG watermark that I made myself into a "Picture in Picture" it just gives a black screen instead of the watermark

My channel is partnered with TGN. And they gave me a watermark. When I put the TGN watermark in it's fine, but when i put my custom watermark in I get a black screen.
Please help me. I am using Imovie 9.0.8 Macbook pro OS X 10.8.3

In the iMovie menu item File > Project Properties for Initial Photo Placement choose Crop - NOT Fit in Frame or Ken Burns (iMovie's default setting is Ken Burns). The latter 2 options will convert the .png image to a .jpg image.
If you've already placed the png image into the timeline as a Picture in Picture, you will need to delete it then change the preference setting to Crop. Then you can insert the png image.
John
TIP: See Karsten Schluter's description here:
https://sites.google.com/site/karstenschluter/imovie09tricks/how-to-add-a-pointe r
Message was edited by: John Cogdell - added TIP

Aperture 3 screen view. I have the adjustments, etc. on the left side and the picture on the far right side. The middle of screen is black. I need to get the picture back in the center of screen

I have the adjustments, etc. on the left side of the screen. The picture is on the far right side of the screen. The middle of the screen is all black.How do I get the picture back in the middle of the acreen. I believe I must have hit a button that moved the picture to the far right.

On the Mac......
Open up Macintosh HD > Applicatons > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the small window that appears
Click the Network tab at the top of the next window
Change the setting for Router Mode from the current DHCP and NAT to read Off (Bridge Mode), then click Update at the lower right of the window, and wait a full minute for the Time Capsule to restart to a green light.
Then.....very important
Power off the Time Capsule and your Arris modem/router for a few minutes
Start up the Arris first, and let it run a few minutes by itself
Start up the Time Capsule next the same way
Your network will now be correct, and your printing capabilities will improve.
If Time Machine backups do not occur now, post back and we will tackle that next.

Picture is different than in preview screen

When I click on one picture in the Photo Screen, it is different than when it is showing multiple pictures at once. How do I get to show the right picture which is the one in full screen.

Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to rebuild the thumbnails. It can take 3 or 4 goes for this to work

Pictures open at lower left of screen and are cut off at the bottom

When I go to a site and open a picture it opens on the left bottom of the screen and the bottom portion of the picture is cut off. Any suggestions?

Please post the web address here so we can look for ourselves. Also . . . .
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you!

Picture fading on 1/4 of screen

Similar Messages

Maybe you are looking for