Picture files all come up as same scenery image

I am new here, hope I am in the right forum, apologize if I am not. All  pictures in my hard drives come up as an ocean shore scene. I have to  double click each one to get the correct photo, but I can't look at them  all at once to compare which one I want to work with. I have  Windows Vista Home Basic, Adobe 8  and Flash 10.3. Am I looking in the wrong place for an answer? Appreciate any help.

Thanks for your reply. I seem to have trouble getting anyone to understand what my problem is. I'm just new on here, not very computer smart, and I may have gotten in the wrong forum, but I had to start someplace. Haven't talked to anyone local that can fix the problem. If I am asking the wrong question for this forum, just delete me and thanks for your time.
Problem-
All my picture files; paint, documents, digital camera, external hard drive, anything within my computer and not on line, are shown as an ocean shore scene (maybe a screen saver) instead of the pictures that are in the file. They all come up with the proper headings and I can double click and see the proper picture one at a time, and slide shows are OK, but I need to be able to see all of them at one time, instead of that screen saver picture. Windows Photo Gallery is the only file that comes up right. All pictures show there in their proper image. 
If this don't make sense to you, I'll understand. Thank you for your time anyway. Take care.
Slim's Leather & Publishing, P.O. Box 274,
New Underwood, SD 57761 (605) 754-6103
http://www.slimscustomleather.com
http://www.cowboypoetry.com/slimmcnaught.htm
http://www.reverbnation.com/slimscl
"keep a leg on each side and your mind in the middle and you'll never have to walk home"

Similar Messages

  • All tracks have the same preview image after import

    Hi,
    when importing some videos (h.264) into iMovie'08, all have the same preview image. I would expect them to hava an image from the clip.
    How to fix this?
    Arne

    The files are on disk in my pictures folder. I took them with my Sony camera as mpeg2 and converted them with MPEG Streamclip to mpeg4 (h.264).
    Just updated to iMovie 7.1, but did not change anything.
    The icons are all of the 1st clip. Moving the mouse over them always show the 1st clip and the audio of the first clip in the thumbnail, but in the preview I see the correct clip.

  • Import data from another browser - Only few IE9 favorites get transfered to bookmarks. HTML solution - HTML file all favorites correct, but same result

    Win7 / IE9: First time use. Example: One favorites folder has 4 HTML entries - only 2 get transferred. Some have none transfered - folder empty. Others have random correct + some missing.

    Monday Nght
    I can see complete IE9 Favorites HTML list in HTML file on Desktop with Firefox -> New Tab -> Open File.-> Open
    In desktop HTML file, there are 37 IE9 folders with no more than nesting 3 deep in any one top folder. These are all correct wrt IE9 favorites.
    All top folders + deepest nests are copied to FF ok. Contents random. Copied contents work ok
    7 HTML web sites not allocated to IE9 top folders are also copied <- these 7 copy to FF and work ok
    Example: First folder in IE9 list has no nesting., IE9 has 4 entries - Firefox has only 2. when either method of copying is used.
    BTW - please advise how I can delete whole Bookmark list in Firefox in one keystroke to be able to retry with a clean Bookmark list
    I am going to uninstall Firefox and start again with a clean copy and use HTML method only to try to transfer IE( files. I will report result.
    BTW, I am in UK on UK time - hence delays in replying - need to sleep sometimes!!!!!
    Tuesday Evening
    Hi
    I uninstalled Firefox. Re installed and loaded IE9 favorites from HTML file.
    All seem copied correctly
    First time I started by using the "import data from another browser". Partial copied.
    Then I tried "Import from HTML file" without deleting whatever favorites had been copied. Still partial copied.
    All seems well.

  • I'm trying to get the image to print correct size.  i've tried center image, fit to media image,  and they all come out the same size...smaller than the size in "image size".  is this an Epson problem or Photoshop problem.  Thanks!

    I just got a new printer...Epson R3000...but have had this problem before.  It's probably a simple fix, but I can't figure it out.  I'm asking for printing on 8.5 x 11 and the image comes out 6.5 x 9.5 every time.  Help please!  And thanks!

    The Epson site stated that the R3000 printer can print borderless however the quality will suffer in the expanded print area. Borderless is not supported on some heavy paper.  To me the means your better off limiting you images size to the standard print area. There will be magins about 1/8" on the four  sides so the print area on 8.5"x11" paper is 8.26" x 10.76"....
    Take note of the print size set by the epson driver it may change depending on the paper type set. Note my first epson 4800 setup where I set 8.5" x 11" sheet paper from tray into the printer setting the driver set a smaller size for the paper which was reflected into the Photoshop Print preview. It shows paper is 8.499" x 10.999 with a small unprintable area across the top....
    Paper
    Use paper under normal conditions:
    Temperature: 59 to 77 °F (15 to 25 °C)
    Humidity: 40 to 60% RH
    Note:
    Since the quality of any particular brand or type of paper may be changed by the manufacturer at any time, Epson cannot guarantee the quality of any non-Epson brand or type of paper. Always test a sample of paper stock before purchasing large quantities or printing large jobs.
    Single-sheets
    Size
    A4 (8.3 × 11.7 inches)
    A6 (4.1 × 5.8 inches)
    Letter (8.5 × 11 inches)
    Legal (8.5 × 14 inches)
    4 × 6 inches
    5 × 7 inches
    8 × 10 inches
    11 × 14 inches
    12 × 12 inches
    Half Letter (5.5 × 8.5 inches)
    B (11 × 17 inches)
    A3 (11.7 × 16.5 inches)
    Super B (13 × 19 inches)
    Paper types
    Plain paper
    Special papers distributed by Epson
    Thickness
    0.003 to 0.004 inch (0.08 to 0.11 mm) in the sheet feeder
    0.012 to 0.051 inch (0.3 to 1.3 mm) in the manual feed tray
    Weight
    17 lb (64 g/m2) to 24 lb (90 g/m2)
    Printable Area
    Note:
    When printing borderless, quality may decline in the expanded printable area. Borderless printing is not supported with poster board.
    Sheets
    Top: 0.12 inch (3 mm) minimum
    Left: 0.12 inch (3 mm) minimum
    Right: 0.12 inch (3 mm) minimum
    Bottom: 0.12 inch (3 mm) minimum
    Roll Paper
    Standard margins
    Borderless printing margins
    CD/DVDs
    Caution:
    Avoid printing in the clear plastic areas of your discs to prevent staining the disc with ink.

  • When receiving text messages on my iPhone 4, they all come at the same time

    Whenever I have text message conversations it's like my phone is waiting for every reply to come in and then display them to me, like sometimes the time stamp could be from ten minutes ago even though i just received it.

    Hello andyb4u8,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    http://www.apple.com/support/iphone/assistant/calls/
    Best of luck,
    Mario

  • Does not import all of selection of same types...

    Hi all. I have downloaded some tutorials (on Encore, of all things) from around the web, and am trying to put them into a DVD so I can watch them on my TV. The tuts are in .mov format, and to use them, I converted them to mpeg2 and brought them into Encore as timelines. Unfortunately, two of the five only have audio and do not have video attached. When I play the mpeg2 files in Media Player, they work fine. I get both halves of the timeline, but the files in question show up as audio...
    Weird. I'm not sure if it would be a Codec problem as they all come from the same place and have been converted to Mpeg anyway.
    Any ideas?
    Kevin

    The problems that you have encountered are most often caused by the CODEC that the files were encoded with. Both AVI and MOV are wrappers, and can contain a lot of different CODECs.
    For the MOV, I'd look into QT-Pro for about US$39. It's just a registration key, but unlocks some decent power in QT. If the MOV plays fine in QT (Audio & Video), just do a Save_As and choose "Self-contained" MOV. Locate this in a separate folder. Then, Import these MOV files into Encore.
    Personally, I'd use Premiere Pro as an intermediate step, but if you do not do any editing, Encore *should* then be able to handle everything. From PP, I'd Export as elemental streams, DV-AVI for the Video only and AC3 for the Audio only. These would get Imported into Encore.
    Good luck,
    Hunt
    PS - you might want to also post a link to the Encore tutorials, that you think were most helpful, as people always are asking for these. A list of good ones, could save others a lot of Googling - just a thought.

  • IWeb Podcast - Drag and Drop Audio and Picture Files

    I have been using iWeb the last few days to create a web site that includes some podcasts. I currently have three podcasts as a part of the site. I have been able to get two of the podcasts to work correctly but the third one, no matter how many times I recreate it seems to be where the difficulty lies.
    The podcast page gives me the opportunity to drag and drop an audio file and a picture file onto the page. As best I can tell, when I drop the audio file onto the page, things seem to be fine. When I drop the picture file onto the object, the audio clip seems to disappear. I have tried dropping the picture file first with basically the same results.
    A couple of more things. I created the original podcast file in GB3. I have found I can't import the podcasting file directly form GB because I end up with a very large file (>60GB) for the audio portion. So, I share the audio file to disk as an M4a file. When I add the audio to the podcast page in iWeb, I drag the audio file from Finder onto the object. The picture I have dropped onto the podcast page both from the Media Browser and from Finder. The results are the same.
    Any help is appreciated.
    Dave

    I think you're asking the question in the wrong forum. From what you posted, there's nothing wrong with GB, you should post in the iWeb forum where you're more likely to get useful and accurate answers about, well, iWeb.

  • I just install Photoshop CC. I try to open the file picture. All open as solid black picture. But on the right side under layer I can see little pic preview. Please help!

    I just install Photoshop CC. I try to open the file picture. All open as solid black picture. But on the right side under layer I can see little pic preview. Please help!

    These questions below may be for a different product... but the KIND of information you need to supply is the same, for the products you use
    More information needed for someone to help... please click below and provide the requested information
    -Premiere Pro Video Editing Information FAQ http://forums.adobe.com/message/4200840
    •What is your exact brand/model graphics adapter (ATI or nVidia or ???)
    •What is your exact graphics adapter driver version?
    •Have you gone to the vendor web site to check for a newer driver?
    •For Windows, do NOT rely on Windows Update to have current driver information
    •-you need to go direct to the vendor web site and check updates for yourself
    •ATI Driver Autodetect http://support.amd.com/en-us/download/auto-detect-tool
    •nVidia Driver Downloads http://www.nvidia.com/Download/index.aspx?lang=en-us

  • I lost all my picture file connections

    I lost all my picture file connections in Photoshop Elements 11. Have tried reconnect and managage catalogs/repair etc with no luck. I believe that updateing OS to Windows 8.1 has something to do with this. What should I do now?

    There's a lot of information here: http://forums.adobe.com/message/4624628
    Also, please give us some details ... when you did the update to Windows 8.1, did the photos stay in the EXACT SAME location, or were they moved somehow?
    What did you try to reconnect? What happened when you tried?

  • Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that- thanks

    Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks

    There's more to it than that.
    Folders in Aperture do not hold Images.  They hold Projects and Albums.  You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
    The relationship between Projects and Images is special:  every Image must in a Project, and can be in only one Project.
    Images can be in as many Albums you want.  Putting an Image in an Album does not move it from the Project that holds it.
    You can make as many Versions from a Master as you want.
    What you want to do may appear simple to you, but it still much adhere to how Aperture works.  I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
    It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful.  If you haven't, take a look at the video tutorials on Apple's Aperture support site.
    I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts.

  • Cannot secure delete items from trash: 180 items (pictures, files, folders) remain even if I check "remove all items"

    I cannot secure delete items from trash: 180 items (pictures, files, folders) remain even if I check "remove all items".  Macbook Pro, 10.6.8

    Maybe the items are locked.
    Mac OS X 10.6 Help: Shortcuts for working with items in the Finder
    Shortcuts for working with items in the Finder Command (⌘)-Shift-DeleteEmpty the Trash without any warning or when it contains locked filesCommand (⌘)-Shift-Option-Delete
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/cdb_cpmvfky.html

  • When I listen to music on Apple TV 2 my pictures from iPhoto come in, but always the same album (which I nevr asked for), always in random order and always in a different format. How can I control what is going on and choose the album myself.

    When I listen to music on Apple TV 2 my pictures from iPhoto come in aafter about ten minutes, but always the same album (which I never asked for), always in random order and always in a different format. How can I choose a different album myself and control the order and format?

    Thank you Winston for a helpful response and for reminding me of something which I found nearly a year ago and then lost (in my mind) because I did not use it. I am grateful for a correct answer but it still only achieves part of what I wanted.
    I can now choose my photos, decide how long they stay on screen and choose one of a variety of presentations. Two things I still can't do.
    One is to get it to play the photos in the chronological order in which I have carefully set them in an album; it still tends to be random and repetitive. The other is that I cannot get any of them them to saty on screen for more than about 20 seconds. I guess this is all due to the way Apple TV is constructed.
    But still thanks, nevertheless.
    Alec

  • I am getting the following error message when i download CS6 Design Standard 'The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please down

    i am trying to download CS6 design standard. but it wont work. the second part of the download comes up with the following message "The message says" the file archive part of Adobe CS6 Design Standard is missing. you need all parts in the same folder in order to extract adobe CS6 Design Standard. Please download all parts."
    Does anyone know what to do?

    Do as it says: Put your downloaded 7z file and the *.exe in a proper folder, not just dump it onto your desktop or whatever.
    Mylenium

  • I just purchased Photoshop 13 for PC MS Windows 8.1  In trying to install, I get the following message after clicking on the 2nd file.  "The file archive part of Adobe Photoshop Elements 13 is missing.  You need all parts in the same folder in order to ex

    I just purchased Photoshop 13 for PC MS Windows 8.1  In trying to install, I get the following message after clicking on the 2nd file.  "The file archive part of Adobe Photoshop Elements 13 is missing.  You need all parts in the same folder in order to extract Adobe Photoshop Elements 13.  Please download all parts.:  I've also gotten an Exit Code: 7 when trying to install.  I've turned my McAfee virus system off while trying to install. 

    Hi,
    Have you tried downloading Photoshop Elements 13 from here?
    https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
    There is only one file to download - which one depends on your system (32-bit or 64-bit).
    These are the trial versions but will convert to the full version when you supply your serial number.
    Brian

  • My picture files open up off center so I cannot see all of the bottom part of the picture.

    Hi,
    My picture files open up off center so I cannot see all of the bottom part of the picture. The ruler across the top read "0" to 13.5". Down the left side of the picture the ruler reads 3", 2",1", 0, 1", 2",3" etc. This leaves a three inch empty space at the top of my viewing area and I lose three inches of the bottom of my picture. I cannot figure out how to adjust this. I have tried the screen modes  and they do not fix my problem.  What can I do to solve this problem?

    Please provide sensible details about your platform, exact version of your OS, exact version of Photoshop, complete details baout your setup, hardware details, monitor resolution, etc.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers: 
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for