Picture Frame not working

my picture frame is not working - when It's on dissolve and I turn it on, nothing happens. when set to origami, the page is blank. i can see the motions, but no photos. I have ensured that actual photos are selected, but it's not working.

A few things to try:
1) Hold sleep and home buttons until the shutdown screen appears. Slide to power off. Then press the sleep button to restart the ipad.
2) If that doesn't work, try a reset, but make sure you have sync'ed just prior to the reset. To reset go to Settings, General, Reset, Erase All Content and Settings. Warning: This will delete all data on the ipad.
If none of these work, contact an expert Apple person:
http://www.apple.com/support/expert/

Similar Messages

  • Picture hyperlinks not working when published? Please help....

    Some of the hyperlinks to my pictures do not work when I publish to my folder. I´ve tried to empty Safaris cache but it still doesn´t work. Please help me, pretty urgent....

    hi briebrie,
    this is common mistake, see my post in this thread:
    http://discussions.apple.com/message.jspa?messageID=4004970#4004970
    The work around is to leave iWeb default nav bar and header enabled, add your home made nav bar (outside/below of iWeb default nav bar).
    Then turn off iWeb nav bar and header when you are done.

  • Picture frame not showing up in sample through store

    My book just got approved for the store, which was quite exciting! However, when i downloaded the sample, the picture frames I had used around the images aren't there. The images are all there, but not the frames. The frames can be seen in the thumbnail pages at the bottom and for a split second when you select that page and it expands. But then the frames disappear. Has anybody else had this problem? Does anybody have any suggestions for how to resolve this?
    I had done a lot of testing beforehand to make sure that the book worked okay, including not only the preview in ibooks author but exporting the book and placing into intunes as has been suggested elsewhere in the forum, and it looked good there too. So I am a bit confused and concerned.
    Thanks!

    From Apple:
    "This is a known issue that we are currently investigating."
    Just in case anybody else ever has this problem. Doesn't seem like many people do, however.
    Jeff
    http://itunes.apple.com/us/book/black-beauty/id558712324?mt=11

  • Graphic stroke "picture frame" not showing

    My photos were "stroked" in the graphic inspector of iweb as "picture frame". This effect works if I view the site from my local hard drive but not when I upload to the commercial server via fetch. Has anyone else been able to see stroked or framed graphics created in iweb and hosted on a commercial, non apple server?

    It was a scripting error on the hosting server and not iweb related. Hurray!

  • Effects and key-frames not working on some clips Premiere CC 2014

    Hi. I am having an issue where effects and key frames applied to both audio and video are not working, but only sometimes. Even after I render or export the video, the effects are not showing up. For example, trying to adjust volume using key-frames on some clips works fine, and not at all on others. The key-frames show up and I can see the volume changing in the effects panel, but it is not happening. Another example is changing the opacity on some video clips and it does not work sometimes. Same thing, I can see the key-frames and the values changing, but it's not actually happening. I have uninstalled and re-installed premiere pro and media encoder with no luck. I have uninstalled and re-installed the latest Nvidia drivers with no luck. Just to restate, this only happens on some clips and rendering or exporting the video does not help. My computer specs are:
    MSI GT60 Laptop:
    Intel Core i7 4800MQ (2.70GHz)
    16GB Memory 1TB HDD 128GB SSD
    NVIDIA GeForce GTX 880M 8GB
    2880 x 1620 16:9 3K Display
    Windows 8.1 64-Bit

    Here is the exact screenshot.  Now I'm also trying other effects as stated in my original post.  But this effect is just an example.  Is there really something that I'm doing wrong here?  Or am I forgetting something?  Is there some special "adobe doesn't let keyframes work on mpg's" rule or something silly like that?
    I wish that I could post a video, but I don't know how.
    Please let me know what I need to do to make this work properly.
    TEX

  • Picture text not working when sent from iPhone to non iPhone

    Since this 6.1 update that I have told everyone not to update. My phone has been doing strange things and I have called and talked to apple and they said they have not heard anything about it. First off, when I try to send a picture text to someone that does not have an iPhone such as an android they either a) can't open it or b) it opens as a video and flashes off. They had no problems before this update. So today my iMessage stopped working. I deletes the messages I had and sent a test text to iPhone friends and it started working. I also went I to settings and added my email to iMessage. In doing this it got me to thinking that if this changed by itself maybe it had something to do with the SMS.  Which is turned on already. I turned off iMessage and sent picture text to non iPhone and it worked. I don't want to have to turn off and no all the time anyone else had this problems?

    Hi Steve,
    I have tried to export to epub 2 and 3. The video is MP4 (h264). It was working just fine on all devices now I can't seem to get any video to export and work.
    Pretty sure it all stopped working after the Yosemite upgrade on the Mac or iOS 8 on devices. Or maybe both.
    Oddly, it plays in iBooks on my mac, just not on the iPad or iPhone.
    I've also tried to just export a couple of short test epubs with vids in different formats but get the same result....not working.

  • Picture frame not showing photos

    I sync my IPad with photos in Aperture. Recently I scanned a couple of my old photos and imported them as JPEG in Aperture and synced them with IPad. I can see these photos in the Photo application, but when I select the album with scanned photos in Picture Frame, they dont show up. That is In Settings I can see the album but when I play the Picture Frame these scanned photos do not show up.
    Other photos (non scanned) show up fine.
    Any ideas why Picture Frame is not showing scanned photos?
    TIA

    From Apple:
    "This is a known issue that we are currently investigating."
    Just in case anybody else ever has this problem. Doesn't seem like many people do, however.
    Jeff
    http://itunes.apple.com/us/book/black-beauty/id558712324?mt=11

  • Set Stroke weight for a frame not working in CS4.

    Hi All,
    How to set Stroke weight for a frame.
    I tried using CreateStrokeWeightCommand of IGraphicAttributeUtils, but its not working in CS4.
    Regards,
    Jasmine
    Message was edited by: Jasmine_Shaikh

    Hi All,
    CreateStrokeWeightCommand of IGraphicAttributeUtils works only when if the frame has some stroke weight already applied to it.
    So do i need to set something else before using CreateStrokeWeightCommand to make it work programatically on a frame with no stroke weight.
    Jasmine

  • Transfer from Lightroom to Photoshop for executing a picture does not work

    Execute a picture from Lightroom to Photoshop das not work. Picture is not opened in Photoshop. What could be the reason?

    First: Go to <Edit >Preferences >General tab / Prompts and click on <Reset all Warning Dialogs>.
    Then do Edit in Photoshop again. Do you get a dialog box? What does it say?
    And which version of Photoshop is this?
    If it is not CS6 but a prior version, you have to select <Render using Lightroom>; <Open anyway> doesn't work with CS5 or earlier CS.
    The reason is that CS5 has not the latest ACR, but Lr 4.3 has. That means that CS5 cannot open a Raw image sent from Lr 4.3.
    The solution is to let Lr 4.3 create the PSD (or TIFF) and send it to CS5. This is done by selecting <Render using Lightroom>.

  • Hyperlinked button in scrollable frame not working

    Hi all,
    I'm working on a multi-article folio. The first article includes a scrollable frame that contains a group made up of one image and two buttons.
    One of those buttons works correctly; that is, it is a mailto that brings up an email client when clicked.
    The other button should open a web page in a separate window. However, when I click this button, I get the following error message:
    Cannot Open Page
    This page cannot be opened because of a error.
    The error is "A server with the specified hostname could not be found." (-1003).
    The odd thing is that another button in the second article that links to the exact same URL *does* work correctly. That article does not use scrollable frames; instead, the button is on top of an image sequence. I have very carefully copied and pasted the URL from the button that does work to the button that does not work. No joy.
    Here's a screenshot of the first article that shows the non-functioning button outlined in a blue frame:
    I am using InDesign CS6 (version 8.0) and Folio Builer
    12.2.4.20120611_m_691037 8.0.7.21 .
    Your help is much appreciated!

    It happened to me too and the only workaround was that I copied the hyperlink text and created a separated text box and pasted the link.
    I then made that textbox "fot frame to content". After that I created a button out of it and assigned the URL for it. After all this I pasted the button in the text as text object.
    Here is a screenshot. This text was within scrollable frame

  • How to time stretch a picture frame (not video) that I have panned and zoomed in Premiere Elements 11?

    Previously used Premiere elements 11 and could zoom in on a picture frame, but also Time stretch it, so the zoom would be slow.  Cannot figure out how to do this in Premiere elements 11.  When I have applied the zoom, but go to right click on the picture frame, it does not allow me to change the time.  It stays on 100.  It will only allow me to change actual video clips.  Does anyone know how to really slow down the zoom on a picture frame, or a way to use the Time stretch like I could do in Elements 7?  Thanks!

    jshook525
    I do confirm your observation on the Time Stretch Speed %/Duration available fields for a still in Premiere Elements 7 vs 11 Presets Horizontal 640 x 480 Zoom In.
    If you want to go with Presets rather than manual keyframing of Scale property in Motion Panel expanded, then...
    1. Given your 5 second still on the Timeline.
    2. Drag the fx Effect Horizontal Image Zoom/640 x 480 Zoom In into the 5 second still on Video Track.
    When you do that two Scale keyframes are automatically placed at the beginning and end of the  5 second clip.
    3. Change the duration of the clip, with one of the following
    a. click and drag to the right the right edge of the clip to increase its duration
    or
    b. right click the clip, select Time Stretch, and set the duration to the increased value....if you had been in 7 the Speed% = 50,
    then the duration you would find is 10 seconds (00;00;10;00). Here no Speed% visible opportunity, just set the duration = 00;00;10;00.
    c. go to Applied Effects Tab/Applied Effects Palette/Motion Panel expanded, and move the 2nd Scale Keyframe to the the right. In this
    example at the 10 second mark, the new duration of the clip.
    "Presets" has its limitation - pan or zoom instead of pan and zoom, and other. In what needs to be done here, it probably would have been quicker
    just to do the Scale keyframing yourself in Motion Panel expanded with the Toggle Animation technique Scale (for Zoom) and Position (for Pan).
    There is more to all this, but for now let me know if any of the above could get your through to your goal.
    Thanks
    ATR

  • Remove Labeled Frame Not Working

    Hi,
    Please see below code and which is not working for me.
        If myDocument.textFrames.item("myRemoveFrame") Then
            delete
        End If
    Any one has any idea. What I am looking is to delete all text frame with the label name of "myRemoveFrame".
    Regards,
    Poo

    Perhaps you should just tell what your code is supposed to be. I can only see it's not Javascript.
    ..  and which is not working for me. ...
    That can mean anything. Why doesn't it work for you? Does it work for others? Does it work at all? Does it even compile?

  • Picture Password not working

    The picture password does not work following the software update (10.2.1.2102). The option often disappears but if you go out of the Device Password menua and back in, it the re-appears. 
    Following the instructions to the end confirms it has been setup but once you lock the phone and try to unlock it asks for the numeric device password. 
    I have tried restarting also disabling all the passwords restarting and enabling picture password but once again it does not work. 
    I see that the Z10 has the same issue. Can someone assist with this?
    My phone is not connected to any corporate BES. 
    Thanks

    I have the same problem, exchange server work account means I can't use Picture Password. I hope they fix this because there is no way in hell lthe IT folks will change the Exchange server, and I really want to use the Picture Password feature.

  • Mouse Forward/Back Button - Frames not Working

    FireFox 4 - The mouse back button (programmed Alt/left arrow + Alt/right arrow) does not support browser window with split panes - multiple scrolling window panes. The front/back mouse buttons works with the left window pane, but not the right frame does not work. This worked in previous version.

    If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
    *Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
    * Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")

  • Picture adjustments not working from Action Menu

    Hi, I have a Sony Bravia KDL-55w805C with the latest firmware and The "Picture adjustmen" entry, within the "Action Menu" List is not working. 
    At the beggining it was working just fine and after a day or so, whenever I click it, nothing happens. I can still go to that menu browsing throug the Settings in the home screen, but I can't select it from any other place. Can anyone please help me with this?

    Any help? UP

Maybe you are looking for