Picture Gallery Help!

Hey everybody,
I am new to flash and have three seperate but sort - of
related questions that I was hoping you guys could help me answer!
Question 1. In april, I will be putting on a "website" - its
going to be displayed live via a projector onto a projection
screen. for a small student convention, at this convention are
competitions for the students to enter, the students will be
leaving the competition through to doors (door A and door b) What
they (I) want to do is take a photograph of a student as they leave
their competition, ship the photo over to the computer holding all
the files for the site, and then 10-30 seconds after the picture
was taken I want it to be displayed live on the screen. I have the
camera's set, they automatically take a picture and send them to a
file on a computer hooked up via network. What I need is a gallery
that will display pictures randomly from four sources, - 1) stock
photos taken prior to the convention, 2) Pictures from Door A
3)pictures from Door B and 4) Advertisments created prior to the
convention. The first three sources I want to cycle through about
every 20-30 seconds, preferably with a spiffy transition from one
picture to the next with preference (at least in the case of Door A
and B) given to the newest photos taken. The fourth source (the
advertisments) I want to cycle into the gallery every 7-10 minutes
and stay on screen for 1 - 3 minutes. I can give up source 4 if
nescesary, but I would like to have it. All the pictures/ads will
be the same size.
The gallery doesnt need to be styled on the borders, I need
it to blend and be part of the page, just change images when it
needs to. I will be doing other things at the conference and cannot
baby-sit the flash gallery, is their a way to create the gallery,
and tell it to pull from the sources (call it four folders) and
rotate when needed. I know (but dont know how to make) that the
transitions elements can be set up ahead of time, but what about
the live image aspect?
Question 2 - Similar to the first, but everything will be
done ahead of time - at another point on the page I want to have
banner ads from our sponsors, I just need a gallery to cycle
through the ads at a predetermined time (i.e Ad 1 stays up for 5
minutes, while Ad 2 stays up for 2 minutes, etc)
Question 3 - Not related to the above website, I have another
page I am developing that I think could greatly benefit from the
coolness of flash. This will be a picture gallery for 2 products,
what I am envisioning is a display area for a large picture,
underneath it 2 tracks of thumbnails, click on track 1 and the
display area shows the big pictures of the thumnails in that track,
click on track 2 and it displays the big pictures of that track. It
would also be cool if it had a zoom feature and a move feature. I
know the images can be loaded in with an xml document (I think I
know this) The site will be using a database with lots of products,
I need to be able to make the XML and flash gallery work with the
database so that it can change thumnails and bigpictures according
to the database info - so when you are on product 1, you see
product 1's thumbs and bigpics. Product 2 - etc.... I can make the
XML dynamic, I just need the flash part, and make sure it pulls the
thumbs from an xml file (or other outside source that can be set to
dynamically get the info) This gallery will be styled and embeded
into a product template, and
also can't be babysat or created for each product.
I am not against buying a prebuilt option if someone knows
some good ones, I am also not against building it myself if someone
could give me some guidance as to where to go for tutorials, that
sort of thing.
Thanks for the help everybody, If you need any more info
please let me know.
-Adam

What OS version are you running on your phone and who is your carrier? This is something that is controlled by the OS and while there is no way to change the number of thumbnails per row, some OSes have clearer thumbnails than others.
You can find your OS version under Options > About. Its the number listed after the v. (e.g. 5.0.0.713).
If you want to thank someone for their comment, do so by clicking the Thumbs Up icon.
If your issue is resolved, don't forget to click the Solution button on the resolution!

Similar Messages

Picture gallery for installing the MaxUpgrades P/N SZ-MP2009OPT06

Thought I'd post a few pics for the installation.
Note that the long red SATA data cable runs from the PCIe card's SATA data connector over to the Optical drive bay and connects to the Optical drive's SATA data port. It can be routed behind the Optical drive bay's backplate (as shown) or thru a small opening at bottom left corner (looking at it from the inside) of the plastic bracket that houses the sliding metal flaps that open for the Optical drive's tray. A small screw on left of bracket may have to be loosened some to get the cable end thru the gap.
Note how the assembly will ultimately sit inside the Optical drive bay and position cables to make them tidy before sliding the assembly into the bay.
The two SATA disks will show up in System Profiler and Disk Utility as being in "upper 1" and "Upper 2".
I RAID-0 (software striped using Disk Utility) the two 1.5 TB disk and ran 4 simultaneous mkfile processes in Terminal.app and used Activity Monitor to observe the i/o rate. With 4 mkfile processes running the i/o rate topped out at around 205 MBytes/sec. I launched a 5th mkfile but the i/o rate did not increase beyond the approx 210 MBytes/sec. I assume the 210 MBytes/sec was maxing out the 3Gb/s specs for the disks.
I then ran a Disk Utility single erase of writing zero to the RAID-0 set. This took close to 24 hrs to complete without any errors.
I hope the picture gallery help others with their installation.
Picture gallery at http://gallery.me.com/barrysharp#100326

It can be routed behind the Optical drive bay's backplate
So when you take off the back plate, the cable drops down and swings over to the card, or does it then have to go over or behind the power supply. I loosened and took out that little screw in the front and it was still unusually difficult to thread the cable, really the connector, through it. I was able to get one through but it seemed impossible to put another through.
And all the power you needed came from within the optical bay, right? Do you know of another place where one can get power from?

Picture Gallery - Please help!!!!

Hey everyone
My images under my picture gallery are displayed (four images per row). How can I change it so there are three in a row.  My images are also bad quality when you view them as tiles. All my friends etc pictures are very clear. Your help will be greatly appreciated (curve 8520)

No need to post twice...your answer was given in your other post:
http://supportforums.blackberry.com/t5/BlackBerry-Storm-BlackBerry-9500/Picture-Gallery-Please-help/...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Help please with Picture Gallery

Hi Guys!
My name is Rick, i want to create a picture gallery using as
datasource a
xml file, until now i can load each image from xml reading
its path, i
create a movieclip instance and load inside the jpg file, but
now i want to
create an onPress event for each picture to send popup using
javascript,
i've tried with several ways but i can't make it works, just
one image can
handle the onPress event, how can i create at runtime onPress
events for
each of my images?
this is my code
function CargaXML(RUTA) {
// Create a new XML object.
var flooring:XML = new XML();
// Set the ignoreWhite property to true (default value is
false).
flooring.ignoreWhite = true;
// After loading is complete, trace the XML object.
flooring.onLoad = function(success) {
if (flooring.firstChild.hasChildNodes()) {
var X = 0, Y = 20;
var algo,nombre,nombre2;
for (var i = 0; i<flooring.firstChild.childNodes.length;
i++) {
nombre = "mc"+i; //name of new movieclip
var nextDepth =
_root.spMain.spContentHolder.getNextHighestDepth();
_root.spMain.spContentHolder.attachMovie("mcImg", nombre,
nextDepth,
{_x:X, _y:Y}); //mcImg is a movieclip in my library, so i
create new
instance for each xml node
CARGARIMG(flooring.firstChild.childNodes
.childNodes[0].firstChild.nodeValue,
flooring.firstChild.childNodes.childNodes[1].firstChild.nodeValue,
nombre, i, Y); // pas some
Y += 150;
//for
//if
_root.spMain.vScrollPolicy = "on";
//function
// Load the XML into the flooring object.
flooring.load(RUTA); //RUTA has the xml path
function CARGARIMG(Nombre, whichImage, mc, i, Y) {
if (Nombre != "Ninguna") {
loadMovie(whichImage, mc); //here i load the jpg image
// then i create a text field for an image title
var texto = "texto"+i;
createTextField(texto, getNextHighestDepth(), 0, Y+100, 300,
30);
eval(texto).multiline = true;
eval(texto).text = Nombre;
eval(texto).autoSize = "center";
mc.onPress(){trace(Nombre);} // mc has the new movieclip
instance, i also
tried with eval(mc).onPress(){trace(Nombre);} but nothing
works, just the
last image has attached the event =(
PS: im using Flash 8
Regards
Rick

okidoi Mr Helpy!
let me try with this
just one more question, the button should be created at
runtime or inside my
movieclip?
Regards
Rick
"Mr Helpy mcHelpson" <[email protected]>
escribió en el mensaje
news:f46tjk$lg1$[email protected]..
> flooring.onLoad = function(success) {
> if (flooring.firstChild.hasChildNodes()) {
>
> you can just do
>
> flooring.onLoad = function(success) {
> if (success) {
>
> you'll need to create a button on top of your image.
This for me is most
> easily done with a predefined custom class, and on the
instantiation of
> your
> image(movieclip) you can define the button actions
contained in the movie
> clip.
>
> make sense?
>
> HmcH
>

Picture gallery not opening after OS upgrade

I recently bought blackberry z10 and up graded the OS to 10.2.0.424. After the upgrade I see that Picture gallery doesn't open. I tried rebooting the phone by pressing both volume keys simultaneously, but the phone won't reboot as well. Please help.

gauravrjpl wrote:
I'm sorry for not specifically mentioning the process followed. By soft reboot I meant the method you mentioned for BB10 devices. And hard reboot was pulling out the battery. What I couldn't do was to reboot using the volume keys.
Ah, OK...thanks!
gauravrjpl wrote:
Anyway, you mentioned about clean OS reload. Can you please elaborate? Can I do it myself?
Yup. For the "normal" method (automated, controlled by your carrier as far as the specific OS level you receive), refer:
http://supportforums.blackberry.com/t5/General-BlackBerry-10-Smartphone/How-to-Reload-your-Blackberr...
For the more controlled (by you, letting you decide exactly what to install) method, refer:
http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problems with simple picture gallery

I've got a website project where the client wanted a picture
gallery. I don't really do much with Flash so I went on the web and
found a tutorial on how to get what I want. Problem is that the
instructions I followed are fairly old so I couldn't export my
movie any higher than AS2 and Flash 6 and have it work. That would
be fine except that I wanted to use a feature that requires Flash 8
or higher, namely a gradient mask. I was hoping that I could post
my code and have the board gurus help me out with what i need to do
to get everything working together.
First you'll want to create a movie using AS2 and Flash 8 to
see what I'm trying to accomplish, then export it again with Flash
6 to see it actually working. You can grab a copy of what I'm
working with here:
http://www.technospider.com/~david/rusty.zip
All help greatly appreciated.
Thanks,
David

based on experience. i didn't check your file.
you're not likely to get anyone in this forum to check your
file.
if there's not code problem, and you can't publish for flash
8, there will be an error message. if you can publish for flash 8,
you see no error message but your application fails to work
correctly, you must have a problem with code.

XML data set picture gallery for thinkbox/lightbox/lightwindow ?

Hi, I want to do a gallery using thickbox or lightwindow or
lightbox. I have the pictures in XML file. How can I make a
pictures gallery using data set. I loaded the XML hive and I
pointed to the pictures and gave them ds1
but when I put link reference to {perspImage}
I click the link and I get new browser window not even
lightwindow. Can someone with some experience help?
(I linked all scripts, css already in the HTML and I tested
it on a single picture and it worked but I need to get a gallery
based on images in XML file) please help.
Thanks

I managed to mash Spry/thickbox/jquery/XML together
http://www.stjohnhistoricalsociety.org/Photographs.htm)
several years ago. I can't really remember the details very
well - but I
had to reverse the normal sequence of thickbox magic
enhancement followed by Spry region expansion.

Refresh picture Gallery on NOkia N8

Hi there,
I have just updated my NOkia N8 to 013.016, all went fine apart from lots of missing pics icons in my pictures' gallery which I cannot delete.
When I select them all and try to delete them I simply get back a "General: System Error" message.
How do I refresh the picture gallery, avoiding a hard reset?
Thanks,
QaTQat

Try using something like XPlore symbian to find the files and delete from there, or you could try connecting in mass storage mode and defragment and check for errors with the options on Windows, it will show as E mass memory in 'my computer'
Good Luck
If I have helped at all, a click on the White Star is always appreciated :
you can also help others by marking 'accept as solution'

Mobileme picture gallery in my iphone

How can i see my Mobileme picture gallery in my Iphone? Please help me

That is slideshowpro. It is very cheap and easy to use.

Picture gallery with ASP

I have seen several examples of picture gallery on the net
with XML. But unable to find any example wich integrates with ASP/
HTML.
If someone can help me to do so.
I have something around 20 category of images that i have
provided in a list box on an ASP page. I want the thumbnails of a
selected category to be displayed on Flash stage with left/ right/
top/ bottom/ next/ previous navigation facility.
My object is to provide thumbnails of the pictures on the
left and right side of the stage and then using its large view in
center part of the stage by dragging these thumbnails.
Please help

if (returnVal == JFileChooser.APPROVE_OPTION) {
                File file[]= fcSelectFile.getSelectedFiles();
                //This is where a real application would open the file.
                int count=0;
                while(count<file.length)
                {   JTextArea selectedFile[]=new JTextArea[count];
                    PnlUpload.add(selectedFile[count]);
                    selectedFile[count].setText("Opening: " + file[count].getName() + ".\n");
                    count++;
            }I tried something like this. But somehow it doesn't show anything when I select a few files? I am not too sure what is wrong. Btw, this is only partial code and you can assume other things like Panel and Filechooser are already working. What is not working is this JTextArea array.

Sharepoint Picture Gallery Transition setting

I have a problem with picture gallery slideshow. Sharepoint seem to default transition timing to 15 seconds which is frustratingly slow.
Although I select 2 seconds for the web part setting, the slideshow defaults to the transition setting of 15 seconds.
I need some advice on how to overcome this default setting? Hope someone can help me with this.
Thank you

Hi,
Is it a Picture Library Slideshow Web Part in a SharePoint 2010 environment?
According to your description, suppose that there is a Picture Library Slideshow Web Part in your page, after modifying the “Duration to Show Picture (seconds)” settings,
the slideshow transition speed stay no change.
I tried to reproduce this issue in my environment, it turns out that the slideshow transition speed can be changed by modifying the “Duration to Show Picture (seconds)”
settings and apply the changes to the web part:
I would suggest you create another page and insert the Picture Library Slideshow Web Part there to see if the issue still exists.
Feel free to reply if there any progress.
Best regards
Patrick Liang
TechNet Community Support

Razr M picture gallery?..better options?

So I had to get a new phone this weekend...which is a huge pain to me, but my Droid Pro completely died.
I really dislike the picture gallery. It is organized differently than the Pro...is there a better way to organize my photos? The thumbnails are so big, and if someone is watching over your shoulder you don't want everyone seeing your pix ( at least I don't).
Maybe I am a creature of habit, but It is making me consider returning it.
I haven't been completely impressed with the connectivity and 4G of the phone, as mentioned already in this forum.

Molly check out Some of the Apps on the PlayStore there might be something there that can Help this Situation? and have you Looked at the Manual on the Droid M it might show Options for your Issue with the Gallery...
Before you throw in the Towel Give these Links a Look and Get a Better Perspective of that little you got it may be a little Rough around the Edges but with some of these Guides Hopefully you'll get to Liken it Better.. b33
http://www.motorola.com/us/consumers/DROID-RAZR-M-BY-MOTOROLA/m-DROID-RAZR-M,en_US,pd.html
https://motorola-global-portal.custhelp.com/app/product_page/faqs/p/30,6720,8577
https://motorola-global-portal.custhelp.com/ci/fattach/get/497064/1347470996/redirect/1/filename/RAZR_M_UG_Vzw_68XXXXX620A.pdf

Client wants a picture gallery that he can update himself. Any ideas?

I am building a site for the son of an artist. I have built
in WebYep tags
so he can change the text, but he would also like a picture
gallery with
thumbnails that he can update. Now, like you do, I said yes -
we can do
that. Now I'm wondering exactly how to do it? If it were just
full size
pictures we could give them simple numerical names, and I
could give him a
simple FTP program to pop them into a gallery folder. The
problem is we need
thumbnails. This guy can can use a PC to some extent, but he
doesn't have
Dreamweaver so I cannot use the lovely PVII gallery.
Anyone know of a cheap and easy solution?
Thanks
James Loudon

Check with Murray
I am sure he has done this with a PVII product.
B
www.visit-the-coqui.com/
If you are thinking of a vacation to Puerto Rico
http://gadgetgrapevine.blogspot.com
Latest gadget and other news here
"James Loudon" <[email protected]> wrote in
message
news:fkdukh$4f8$[email protected]..
>I am building a site for the son of an artist. I have
built in WebYep tags
>so he can change the text, but he would also like a
picture gallery with
>thumbnails that he can update. Now, like you do, I said
yes - we can do
>that. Now I'm wondering exactly how to do it? If it were
just full size
>pictures we could give them simple numerical names, and I
could give him a
>simple FTP program to pop them into a gallery folder. The
problem is we
>need thumbnails. This guy can can use a PC to some
extent, but he doesn't
>have Dreamweaver so I cannot use the lovely PVII gallery.
> Anyone know of a cheap and easy solution?
> Thanks
>
> --
> James Loudon
>
>

I am trying to upload my PDF file from my IBooks but its only giving me the option to upload from my pictures/gallery. How do I get it to where I can upload PDF files from my iBook or how do I transfer my PDF files to my pics?

I am trying to upload my PDF file from my iBooks but its only giving me the option to upload from my pictures/gallery. How do I get it so I can upload from my iBooks or move my PDF files to my gallery so I can upload it?

I'm having the same issue. I saved a PDF from an email into iBooks. I'm on apple applying for a job but the only option the upload button has is from the Photos file. How ironic right? Luckily I'm in Logistics and not an IT specialist applying for this job! Lol. Does anyone know the fix?

How do you resize the Picture Gallery Widget? (below 279 pt)

The Picture Gallery widget works very nicely on a book, but it's way too big for my book design. I want a smaller image in the corner of the book. Something you tap on to open the picture gallery.
I can get rid of the title, the caption and the background and shrink the widget a bit, but then you go to the "metrics" section in the Inspector, and the widget will not go below a certain width or height (a potential disaster for the overall design of your book).
Bookry's widgets will not cut it either. What is the option then? Do I need to hand-code my own picture gallery widget? Good Lord..

The arrows don't show up on the iPad, they are only to aid navigation within iBA. You can use boxes in the background to frame your galleries (as the background is off). I believe it's also possible to change the colour of the dots beneath the gallery too, although I forget how to do that right now.
About Apple's rigid UX – I agree that it can be frustrating. Apple intended iBA to be used by everyone, and the sort of design options and customisability we might want may confuse the less experienced user. Apple also wanted the UI for every book to be the same – from the point of view of the new user, once you've used one iBA ebook (or iBook, I'm not sure what Apple want us to call it), you can use them all. Otherwise end users would to get used to a slightly different UI on each book, which kind of works against the idea that ideally UI should be intuitive enough to be invisible. I can see the point in that. I have created a 'How to use' section in every iBA file I've made. It get's old quickly.
Oh, and (you probably know this, but…) you can choose your own custom icon for audio. It's limited, as it's only a placeholder image that allows you to play an audio file, there's no ability to pause the audio or stop it once you choose the view as thumbnail choice. Something I'd like to see changed.
Here's a link to Apple feedback page for iBA. Feel free to hammer it with your suggestions.
https://www.apple.com/feedback/ibooks-author.html

Picture Gallery Help!

Similar Messages

Maybe you are looking for