Picture gets "squeezed" during export

Hello: I'm new to Final Cut and am having trouble figuring out why when I export my movie using either quicktime or compressor, the end result is that the picture has black "columns" on the left and right of the picture, giving it a "squeezed" look. I'm trying to locate a place for settings for the export, but I'm not finding it and am afraid to mess anything up without first having a little guidance. Any that I can get would be greatly appreciated!
Thanks.

no, thats not it.
what you're describing is a situation where you have taken a 4:3 clip and put it in a 16:9 anamorphic timeline ... then looked at the raw 4:3 output ie the 16:9 canvas image squeezed to its true 4:3 aspect ratio
16:9 anamorphic is not true 16:9 it is 4:3 that has been stretched horizontally at record/playback to look like it is 16:9... when you view it in its raw 4:3 state you will get the sqeezing that you describe.
now, i'm not meaning to say that you have necessarily done any of the above, only that this is how one arrives at the condition you are seeing, and that somewhere along the line the settings have gotten confused either in fcp, quicktime, compresor or dvdsp

Similar Messages

  • PSE9: Second 'My Pictures' gets created during Restore process

    I'm running PSE9 on Win7.
    I've been doing some Restore Catalogs to move my PSE from an old pc to this new one.
    My old pc was Win XP.
    I've noticed that the Restore process creates what looks like a second 'My Pictures' folder
    in my folder structure. Inside this My Pictures there is an Adobe folder which has an Other Pictures folder.
    All of these folders are empty.
    All of my images go into a second 'My Pictures' folder. I'm puzzled why I'm getting this extra
    My Pictures folder. I thought it might have something to do with Homegroup. The icon for the folder
    looks a little different than the other folder. Anyway, I believe I have disabled the Homegroup feature.
    Thanks for any help of advice!

    OK.
    It looks like it is something that comes with the Library support in Win7.
    'My Pictures' seems to be a label. The actual directory node comes out
    as 'Pictures'.
    I removed the 'Public' directory from the Library for Pictures.
    And customized the look of Windows Explorer so that I see what I want
    to see now.
    Thanks!

  • After I make a trailer or movie on my Iphone 4S and try to save it to the camera roll, I get a message that "an error occurred during export".  The message appears after the piece has seeminly finished exporting.  What am I doing wrong???

    After I make a trailer or movie on my Iphone 4S using IMovie and try to save it to the camera roll, I get the message "An error occurred during export."  The message appears after the piece has seemingly finished exporting.  What am I doing wrong????

    I appreciate you taking the time to copy and paste boilerplate responses to increase your points in this forum, but I've already read all those support articles in depth; but you have barely read my post at all. Please don't guess a fix. Only someone with the latest versions of iMovie, iOS, iPhone, Yosemite, and MacBook Pro is qualified to troubleshoot this, because anyone would immediately see that the following option no longer exists:
    Open iMovie on your Mac, and choose File > Import > iMovie for iOS Project.
    Read my post before you reply: It clearly says in the title and within my post that I can neither export nor import through iTunes without receiving an error message. So your response neither solved my question nor helped me whatsoever.

  • OBIEE 11.1.1.6.12 - value modification during export in tab delimited format

    Hi all,
    we have noticed unproper value modification during export in tab delimited format.
    Please find example below:
    The proper value is 24150170000011615 (it is state register number of enterprise).
    The wrong value is 24150170000011600.
    Correct value:
    http://s12.postimg.org/v2gpqqzgd/obiee_1.png
    How do we export data from obiee:
    http://s23.postimg.org/6k7dwiezf/obiee_2.png
    Wrong value after export:
    http://s22.postimg.org/qdgqgogn5/obiee_3.png
    What should we do to fix it?

    The bigger picture is as follows:
    I have a button on my report that essentially should download the output of report to tab delimited text file. This button is integrated with a custom built class which has a main method. When I click on the button, the logic written in the main method gets executed.
    In this method I generate my internal table and pass to cl_gui_frontend_services=>gui_download method with parameters mention above.
    I try debugging but every thing seems to be working correct when sy-subrc = 0 through executable program and it does not enter into the download method logic when i do it through main method, instead sy-subrc is straight set to 6 (unknown error).
    Regards,
    Pankaj.

  • I repeatedly get "error during rendering/encoding of menus/slideshow" message.  This process is the same on my iMac, MacBook and another iMac.  I have been burning dvd's int he same way for the past 12 months using the exact same steps successfully.

    I keep getting "error during rendering/encoding of menus/slideshows" message.  I have been burning DVD's in exactly the same way for the past 12 months and mostly on my MacBook which is 3 years old.  Obviously I'm using iDVD.  I purchased an iMac about a year ago and moved to use this for dvd burning without problem.  A few months ago (approximately) I started to experience problems with burning with the error message above.  I tried everything including starting the whole process from scratch right down to capturing the movie clips from my video recorder into iMovie, then using them in iDVD.  Still the same message came up.  I lost count of how many times I repeated the process with different clips and variations and the same thing happened.  This was also the case with my MacBook and my husband's iMac.
    After taking both of mymac's tothe service centre, having new optical thingys put it and even a new hard drive on my iMac along with a new DVD burner the same thing happened.  They told me it must be the process that I am using that is incorrect!
    I took my 27" iMac to an apple shop and asked them to assist me while I use the same technique as I always had.  The same message came up so they tried using my clips in one of their mac's.  The same message. They tried it with different clips and the same message.  The only way we could get theirs to work was with a magic DVD which did not produce what I needed and was limited with only one page. 
    I now cannot use any of my Mac's for the intended purpose that I bought them for - to produce good media for my work!  It was suggested that I purchase some non Mac software to burn DVDs which defeats the object of having a mac with iDVD in my opinion.  I have a book on iDVD which is very informative and have followed the process to the letter and checked all the trouble shooting and still no remedy.  It was mentioned that an up-date may have caused the problem on all my macs.
    I feel that this issue should be addressed by Apple as a matter of correctness.
    I now find that on the net there are many posts in forums and such like with exactly the same (almost word for word) problems.  Please Apple, keep/regain your good name and sort this out.
    Jayne Connelly

    Thanks Bengt W for your attention to this matter.  So much appreciated.  And thanks for putting me right on the aim of forums (new to this).  Although, you may regret asking for more information.  I've added everything I can below.
    The process I used is as follows:
    Import recorded clips of between 5 and 15minutes each from my video recorder into i
    Edit the clips (remove unwanted start and endng)
    Add title to front of clips
    ‘Share’ them to ‘movie’ (export using QuickTime)folder in .mov format individually
    Open iDVD and ‘create new project’
    Select ‘favourite’ theme that I have set up forall my work dvd’s (this has been used successfully many times and I’ve triedwithout using the favourite them).
    Add 2 submenus for each group of clips
    Select submenu  - drag and drop between 3 – 6 clips in each of the twosubmenus
    Change title colours on clips
    Dragand drop image into drop zones where required
    In‘map’ view I check for any yellow warnings before burning to disc
    In an attempt to remedy the problems I’ve tried the following:
    Try new DVD discs
    Try different themes (favourites and standardones)
    Change images in drop zones
    Start whole process again even from importingfrom camera again
    Two other completely different computers (iMacand MacBook) with iDVD
    Go to apple shop and use their computers to doin iDVD
    Try with one clip and no menu pages added
    Use a clip that I already have that did notoriginate from my camera
    Turn computer off and restart
    New hard drive
    New optical lense (thing)
    New DVD burner
    Saving to disc image rather than dvd disc
    Other points:
    I also have a ‘flip’ and ‘iPhone’ whereI’ve imported footage camera which, although limited, records and makes videoclips and burns them to DVD through iDVD without problem.
    For example, I have just gone through steps 5 - 11 using some clips that were already imported from my iphone to iPhoto and dragged across.  I used a theme that I've used before which has failed and added one sub menu page where the clip went.  It burned to disc image successfully.
    The startup disc, I believe will have no space issues asit’s a new hard drive with no use apart from this.  That could have been an issue before (I didn’t check it) butnot now.
    Other technical stuff that I don't understand but you may:
    I have…… Mac OS X Version 10.6.7 with all updates onit.  Processor 2.8 GHz Intel Corei7.  Memory 4GB 1067 MHz DDR3.
    iDVD version 7.1.1
    HardwareOverview:
      Model Name: iMac
      Model Identifier: iMac11,1
      Processor Name: Intel Core i7
      Processor Speed: 2.8 GHz
      Number Of Processors: 1
      Total Number Of Cores: 4
      L2 Cache (per core): 256 KB
      L3 Cache: 8 MB
      Memory: 4GB
      Processor Interconnect Speed: 4.8 GT/s
      Boot ROM Version: IM111.0034.B02
    SMC Version (system):            1.54f36
    OPTIARCDVD RW AD-5680H:
      Firmware Revision:     3AHB
      Interconnect:    ATAPI
      Burn Support:   Yes (AppleShipping Drive)
      Cache:    2048KB
      Reads DVD:    Yes
      CD-Write: -R, -RW
      DVD-Write:   -R, -R DL,-RW, +R, +R DL, +RW
      Write Strategies:  CD-TAO,CD-SAO, CD-Raw, DVD-DAO
      Media: Toshow the available burn speeds, insert a disc and choose View > Refresh
    If you can solve this you are better than the 'apple geeks' in the shop and the service technicians in the service centre (and of course me but that's no achievement). 
    Eagerly awaiting your reply.
    Jayne

  • During export from Discover to Excel, Time Format changes to Number Format

    Hi
    I have a seconds column which is of number datatype. But in my report, I am converting the number in *0HH:MI:SS* format. For example, I have *4952534 seconds*. So my report is showing *1375:42:14* which is a Time Format. It looks good when I view the data in Discoverer Viewer or Plus. But when I try to export the data to Excel, the time format gets converted to *4952534 seconds*, which is creating problems. So can you suggest on how can I preserve the formatting during export to excel from discoverer.
    Thanks
    Sachin

    Hi,
    Excel will not implement the 0HH:MI:SS data format, it just gets the field as a number. You will have to format the field into text using the calculation from my previous post.
    Rod West

  • Embed jpg in a pdf without re-compressing it during export or save?

    I need to create a pdf-portfolio. Therefore I want the images included to look their best. I thought it a small matter to individually compress the images in photoshop for optimal appearance and size, and then to include them in a document for pdf-export. The idea is that you open up this pdf and see the images exactly as I saw them in the photoshop jpg previerw. So far I tried Illustrator and InDesign. Unfortunately both of these seem unable to just include the original jpg during pdf-export. They are completely set on recompressing the images. Either that or they will try to do away with the compression completely. You can choose the compression alternative "none", but then you will end up with a huge pdf-file, a couple of hundred megabytes in my case. If you chose any other compression alternative, the jpg will be degraded further during the second pass of compression that will take place during export. The images will look miserable.
    So my question: Is there any way to get around this weird limitation in Illustrator or Indesign? And if not, what software should I be using to design a portfolio and include individually compressed jpg's and jpg2000?
    Thomas

    No, png will typically be much bigger in filesize, not an option if data size is a factor.
    BUT, I found a solution: I downloaded & installed Acrobat XI Pro. In Acrobat I open the pdf that was saved from Illustrator. Then it's just a matter of replacing all images manually with your custom saved jpg's. Comparing pdf's: Saved from Illustrator: 8.3 Mb and ****** looking general impression, lots of banding and artefacts. Modified in Acrobat and resaved with custom saved jpg's: 5.5 Mb and much nicer looking images, with few apparent compression artefacts, no banding.

  • How to dereference objects during export flow

    Hello!
    I would like to export information from a referenced object during export flow but the referenced object is not part of the connector space object of the affected management agent. This is my demo configuration:
    testEmployeeData:
    - employeeId (anchor)
    - personId (reference to testPerson object)
    - telephoneNumber
    - uid
    testPerson:
    - displayName
    - givenName
    - sn
    - uid (anchor)
    - employeeData (multi-value reference to testEmployeeData recors; can be null)
    I have an SQL agent ("HR") that imports person and employeeData objects into the metaverse. The references seem to work as I can see them in the Sync Service Manager and they point to the right objects too. Now I would like to access some of the
    referenced objects' data during export attribute flow. I have configured an export-only "Persons" agent that should export the personal data into an attribute-value file. This is what I would like the export flow to look like:
    displayName <- testPerson.displayName
    employeeId (multi-value) <- testEmployeeData.employeeId (*)
    firstName <- testPerson.firstName
    lastName <- testPerson.sn
    uid <- testPerson.uid
    The problem is now the advanced attribute flow marked with (*). The testPerson.employeeData field contains a multi-valued reference to all matching employeeData records which contain the employeeId. The output file should contain all matching employeeIds
    instead of the reference values (GUIDs) but I can't get this to work. When I try to configure an advanced export flow rule flowing testPerson.employeeData to person.employeeId I just receive an error message stating that metaverse reference attributes cannot
    be defined as source attributes.
    Do I have to create an appropriate connector space object for this to work? Or is there some other way to dereference objects in order to get certain attributes? By the way, the person connector space object in the "Persons" agent is created by
    provisioning code based on testPerson metaverse objects.
    Regards,
    Philipp

    Philipp,
    What you are trying to do cannot be accomplished the way you are trying to do.
    Here are your options:
    Use classic provisioning using rules extensions or
    Use a workflow to deference attributes in FIM Service and flow flattened data into the target connector space.
    My recommendation is to use the second option to accomplish what you are trying to do as I prefer to stay away from classic code for maintenance and support reasons.
    Good Luck.
    Thanks,
    Jameel Syed |
    Identity & Security Strategist | [email protected] |
    Simplified Identity and Access Management

  • 100% CPU Usage in CS5.5 Premiere Pro during export/encoding

    I am wondering why my CPU usage is so high during exporting of my videos.  My counter shoots up to 100% as soon as I start and hovers at 95% throughout the whole process.  This seems dangerous to me so I wanted to bring it up here as I haven't found anyone with this same issue on this website or google.  Here are my system specs:
    i5-2400 CPU @3.10GHz
    6 GB of Ram
    64 bit windows 7
    Geforce 660 ti graphics card (2gb)
    They aren't top of the line but I feel like it should be capable of encoding.  I've cleaned my fans and tried using avi and h.264 formats which both led to the same issues.
    Any help would be greatly appreciated.  I'm new to premiere pro so I'm sure I left some useful information out above.

    "...the same results"
    This means high CPU usage, right?
    Correct
    Are your exported media files ok?
    I've only completed one because I was freaked out but yes they are fine.
    I guess the thing I'm worried about is my temps going up really high because of the 100% usage.  I thought that they were both entertwined as in high usage = high temps.  I'll look for a temperature program to run while encoding and I'll monitor how high the temps get.  You've given me hope here as I may have been making mountains out of mole hills.  If the temperatures are high would you recommend more fans in my desktop?

  • Unable to create ?volume in iPhoto during export

    Should read  "/volume/"  in "iPhoto"  during export.  Had same message in version 6.0.6 and 7.1.5 and now 8.1.2.   File is archived in original  6.0.6 but was upgraded in oyher two versions.  Will not work in .jpg or .tiff formats.  3330 pictures are involved with different camera desig nations, ie.  DSCN and IMG.
    Any ideas?

    Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). A Finder Window should open with the file selected. Does it? 
    Regards
    TD

  • ORA-04031 during export on CTX-index

    Hi !
    I get ORA-04031 during export when an interMedia CTX-Index should get exported. The exact error message is:
    unable to allocate 4072 bytes of shared memory ("shared pool", "DBMS_SYS_SQL", "PL/SQL MPCODE", "BAMIMA: BAM Buffer")
    followed by
    ORA-06508: PL/SQL: could not find program unit being called
    ORA-06512: in "SYS.DBMS_SQL", line 9
    ORA-06512: in "SYS.DBMS_EXPORT_EXTENSION", line 244
    Any hints for me what I could do?
    TIA,
    Stefan

    Interesting.  You should open a  thread with a more relevant title about views with pk / fk constraints.
    I don't have a way to solve your problem --- to identify such views.
    Hemant K Chitale

  • Error during export of J2EE_CONFIGENTRY

    Hi,
    While doing homogeneous system copy for CRM 2007 System it gives Error during export of J2EE_CONFIGENTRY.
    below is the detail error report.
    15.04.09 14:01:29 com.sap.inst.jload.Jload dbExport
    SEVERE: Error during export of J2EE_CONFIGENTRY
    15.04.09 14:01:29 com.sap.inst.jload.Jload logStackTrace
    SEVERE: java.lang.NullPointerException
         at com.sap.sql.jdbc.mss.MssSQLExceptionAnalyzer.getCategory(MssSQLExceptionAnalyzer.java:112)
         at com.sap.sql.services.core.CoreServices.isDuplicateKeyException(CoreServices.java:133)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.processSQLException(DirectPreparedStatement.java:1189)
         at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeQuery(DirectPreparedStatement.java:285)
         at com.sap.sql.jdbc.common.CommonPreparedStatement.executeQuery(CommonPreparedStatement.java:185)
         at com.sap.inst.jload.db.DBTable.unload(DBTable.java:192)
         at com.sap.inst.jload.Jload.dbExport(Jload.java:179)
         at com.sap.inst.jload.Jload.executeJob(Jload.java:395)
         at com.sap.inst.jload.Jload.main(Jload.java:621)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:81)
    15.04.09 14:01:29 com.sap.inst.jload.db.DBConnection disconnect
    INFO: disconnected
    Thanks & Regards
    Raj Kiran

    Hi,
    Search for sap notes on "J2EE_CONFIGENTRY"
    service.sap.com/notes
    You can get a better solution there.
    Thanks and Regards
    Jaianandh V

  • Program crashes during export/media routine

    My up to date Prem Pro CC 2014 crashes continually during export of a 10 minute video.  Contents are jpegs, Go pro movies and regular movies on top of music file.
    Glad I'm not getting paid to miss this deadline...

    Hi Michael,
    My up to date Prem Pro CC 2014 crashes continually during export of a 10 minute video.
    Sorry to hear that.
    Contents are jpegs
    What is the frame size of the .jpg files? These should be less than 4000 x 4000 for best handling.
    Go pro movie
    What is the frame size of the GoPro files?
    regular movies
    What is the frame size of the video files?
    on top of music file.
    What kind of audio file is it? Does the audio sample rate of the source file match the sequence settings for audio sample rate?
    Are there any gaps between any of the movie files or .jpgs? If so, remove the gaps and try to export once more.
    Thanks,
    Kevin

  • An unexpected error occurred during export. [JSX]

    Whenever I try to convert a Flash file into HTML5 I am continuously getting an error as "An unexpected error occurred during export. [JSX]".
    I am unable to understand where the error has occured. Please help me out with this.

    Hi NIranjan,
    Can you try the solution in this post? Unexpected error on export / CreateJS / Discussion Area - CreateJS Support
    Thanks,
    Preran

  • Error during export of xi-objects

    Hi,
    I get an strange error when trying to export objects from the repository and directory using "Transport Using File System". The error says "Error during export".
    First we got the error "Internal error during pvc call: No space left on device" but this error disappeared without any actions from us and there is space left on the server.
    Please help
    Regards
    Claes

    Hi VJ,
    It only says "Error during export".
    /C

Maybe you are looking for